New Airsoft Guns & Products

If you need a compact pouch to store your radio, Novritsch has your back with the MOLLE Small Radio Pouch! This pouch mounts to MOLLE webbing, meaning it can be worn on a MOLLE belt, plate carrier or backpack and is constructed from 1000D Nylon fabric. This pouch is styled to match the Novritsch ASPC Plate carrier but would also look fantastic on the Minimal Chest Rig. 

Your radio is retained by a top flap with an elastic bungee cord, keeping your comms safe and sound while providing access to the on/off dial and allowing the antenna to protrude. Fitment-wise, this pouch is designed for the Novritsch Tactical Radio V3 but should also fit most compact handheld radios like the Baofeng UV5-R. Big boy radios like AN/PRC-152 definitely won't fit, if you need a pouch for bigger radios, this would be our pick. 

If you want to stay on comms with your team while adding minimal bulk and weight to your loadout, the Novritsch MOLLE Small Radio Pouch will be an asset to your kit list!

If you've lost a selector switch from your ARCTURUS AR15 Lite AEG, this set will sort you out! The Ambidextrous Selector Switch Set for AR15 Lite Series from ARCTURUS is an original replacement parts set specifically for the ARCTURUS AR15 Lite AEG series and is unlikely to fit other brands and models of M4 AEG. 

The set includes both selector switches, the mounting bolts, the detent and detent spring, replacing the entire external selector mech of the AR15 Lite. If you had a mid-game mishap and lost a selector switch, this set will get you up and running again!

If your plate carrier is a bit warm for summer wear, the 8Fields Quick Release 3-Band Cummerbund for Plate Carrier should help you keep cool! This ladder-style cummerbund provides improved airflow when compared to solid cummerbunds and allows you to remove your plate carrier in seconds, with no need to readjust the front velcro when you put it back on. 

The 3-Band Cummerbund is constructed from Nylon with polymer quick-release buckles surrounded by elastic to keep them secure. Each of the 3 bands boasts MOLLE loops, ready for MOLLE pouches to be mounted where you need them, allowing for improved comfort and heat dissipation while not compromising on load-bearing capacity. 

The Quick Release 3-Band Cummerbund for Plate Carrier is compatible with most plate carriers which use a cummerbund with a Velcro-secured front and bungee cord at the rear. The bungee cord also allows the cummerbund to be adjusted to suit most body types via the bungee cord at the rear. If you want to avoid messing with Velcro, save time and reduce sweatiness, the 8Fields Tactical Quick Release 3-Band Cummerbund for Plate Carrier will do just that!

If you're looking for affordable 0.28g tracer BBs, the Delta Armory 0.28g 6mm Tracer BBs are a great call. Supplied in a 1KG bulk bag containing approximately 3571 BBs, Delta's 0.28g tracers glow green when shot through an Airsoft tracer unit, giving you an instinct aiming advantage, particularly in low-light situations. 

These BBs weigh 0.28g, making them ideal for outdoor skirmishes and long-range engagements with Airsoft guns with upgraded HOP-up parts. Despite being some of the cheapest tracer BBs on the market, the Delta Armory 0.28g tracers have very tight tolerances, measuring 5.95mm +/- 0.01mm which is great for accuracy and consistency. If you need 0.28g tracers to light the enemy up at long range, the Delta Armory 0.28g 6mm Tracer BBs will do exactly that!

If you're looking for spare mags for your Golden Eagle Hi-capa, here they are! The 25rnd Green Gas Magazine for Hi-capa GBB is constructed from alloy with brass valves, rubber o-rings, a steel feed spring and a polymer baseplate and is a green gas magazine. The mag can be filled using the fill valve on the base plate and is loaded with BBs either through the feed lips at the top of the mag or by pulling the follower down and loading BBs in through the front.

This magazine is compatible with the Golden Eagle Hi-capa series but is patterned after the TM design so should also be compatible with other Hi-capa platforms as long as they use the Tokyo Marui internal system.

If you're looking for a new outer barrel to change up the length of your M4/AR-15 AEG, the 5KU 10.3" Aluminium Outer Barrel for M4/AR-15 AEG is a fantastic option. Constructed from aluminium with 14mm CCW male threading at the tip, this 10.3-inch outer barrel is styled to match the profile of real 10.3" CQBR barrels and includes pin holes for mounting an M4/AR-15 front sight/gas block at the "carbine length" position. 

The 5KU 10.3" Aluminium Outer Barrel for M4/AR-15 AEG has the standard Tokyo Marui AEG outer barrel fitting at the rear, meaning it should fit the vast majority of M4/AR-15 platform AEGs but won't fit NGRS M4s or GBBRs. Whether you're shortening your barrel to a more CQB-friendly size or giving it a bit more length for more long-range effect, the 5KU 10.3" Aluminium Outer Barrel belongs on your M4 AEG!

If you're looking for hard-wearing combat trousers in a wide range of camouflage options, the Novritsch ASU Field Pants are ideal. These trousers are based on the ASU Combat Pants but omit the exposed Crye style knee pad pockets and spandex sections in favour of a more classic cut. This means the Field Pants are slightly less flexible but far more comfortable in cold or windy weather, ideal for all-weather Airsofters skirmishing in bleak conditions. 

The Field Pants keep the superb pocket layout of the Combat Pants but make use of covered knee pad pockets and a reinforced seat, making for a more woodland skirmish-suited cut which will keep your knee pads retained even when crawling. The highly functional pocket layout includes a pair of front and back pockets, 2 thigh admin pockets, 2 lower leg admin pockets, 2 cargo pockets with built-in magazine retainers and a multitool/flashlight pocket. 

The Novritsch ASU Field Pants are the ideal painting for the ASU Field Shirt, well suited to winter and autumn wear when you may find the Combat Shirt and Combat Pants a bit chilly. If you're looking for a fantastic combination of modern pocket design with a classic combat trouser cut, the Novritsch ASU Field Pants will serve you well!

If you're building out your AK to match the latest real steel builds, the 5KU Lightweight Zco Style Lower Handguard for AK-47/74 is an essential bit of kit. Based on the real steel Zco B30 handguard, this CNC 6061 aluminium lower handguard is designed to fit CYMA, GHK and LCT AK rifles and provides a full length 20mm Picatinny rail at 6 o'clock and a short length at 3 o'clock. 

Additional accessories can be mounted using Zco style rail adapters, and despite being double the length of standard AK handguards, the Lightweight Zco Style Lower Handguard tips the scales at a minuscule 174g, meaning it won't slow you down in-game. If your AK is due for a makeover, give it the modern touch it deserves with the Lightweight Zco Style Lower Handguard for AK-47/74 from 5KU!

If you're working on a high-speed or high FPS gearbox, the FPS Softair Carbon Fibre Reinforced Tappet Plate for V3 Gearbox is essential. This hard-wearing tappet plate is constructed from carbon fibre-reinforced polymer, making it strong and flexible in equal measure. We've had superb results installing the Version 2 equivalent of this tappet plate in Bolster Armouries builds and if you seek similar performance we would wholeheartedly recommend this plate over others.

This Carbon Fibre Tappet Plate is compatible with any version 3 Airsoft gearbox, including those found in AUG, AR36, AK & S55x AEGs. Whether you're building a DMR or a beast of a high-speed setup, the FPS Softair Carbon Fibre Reinforced Tappet Plate for V3 Gearbox is the ideal upgrade to keep it feeding!

If you want a more realistic muzzle device for your CM.041 series SMG-5 from CYMA, the 5KU SMG-5 Tri-lug Muzzle Device is the one to go for! Patterned after the real steel Tri-Lug muzzle device, unlike most Airsoft examples, the 5KU model doesn't include a threaded section at the front, making it more suitable for old-school SMG-5 setups, especially if you're a stitch counter. 

Compatibility-wise, this muzzle device is only compatible with SMG-5s from CYMA, specifically the CM.041 series and won't fit other brands, nor will it fit the -K and SD variants. 

If you want sneaky styling for your CM.702 M24 or a tracer to light the enemy up, the CYMA Silencer Adapter for CM.702 M24 Sniper Rifle is what you need. This adapter replaces the front barrel cap, providing 14mm CCW male threads so you can mount the most common suppressors, tracer units and other muzzle devices on the Airsoft market. 

If you're building a beast of a gearbox, the Lonex Aluminium Cylinder Head for V2/3 Gearbox belongs inside! This CNC aluminium cylinder head is compatible with version 2 and version 3 gearboxes and is equipped with a pair of O-rings around its circumference intended to close the gap between the cylinder and head for maximum air efficiency.

Its robust CNC aluminium construction pairs perfectly with the shock-absorbing rubber pad pre-installed on the rear of the cylinder head, reducing impact stress on the gearbox shell, piston head and cylinder head for a longer lifespan. If you're upgrading your V2 or V3 gearbox or working on a scratch build, the Lonex Aluminium Cylinder Head for V2/3 Gearbox is a fantastic choice!

If you need SMG or pistol mag pouches with a slick modern look, the Novritsch MOLLE Elastic SMG/SSQ22 Magazine Pouch is what you need. Styled to match the Novrtisch ASPC plate carrier, this magazine pouch is designed for 9mm style SMG magazines, including the SSR9, G&G ARP9, VORSK VMP-1, SMG-5 and most extended pistol magazines. 

This pouch mounts to MOLLE webbing found on rigs, backpacks, belts and elsewhere. On the front of each pouch, we have additional laser-cut MOLLE loops to stack more pouches for a heavier loadout. Adjustable retention is provided by a toggle and bungee cord, allowing to you to loosen the draw for speed or tighten it down for security. 

If you need a more comfortable belt solution for your sidearm or magazines, the 8Fields Tactical MOLLE Padded Combat Belt is a fine choice. This combat belt is constructed from 1000D Polyester with polymer buckles and is padded for comfort with a rigid polymer insert to keep everything in place. The belt is backed with breathable mesh fabric, allowing 

MOLLE webbing loops adorn the exterior, allowing magazine pouches, dump pouches, admin pouches, holsters and all manner of other MOLLE compatible kit to be mounted and positioned to suit your exact needs. If you're running out of space on your plate carrier or want to run a light and fast belt kit for summer, the 8Fields Tactical MOLLE Padded Combat Belt is what you need!

If you're running an 8Fields tactical buckle-up rig, the Buckle Up Open Triple Rifle/Pistol Magazine Pouch is yet another option available for this highly modular system. Compatible with 8Fields Tactical Buckle Up plate carriers and chest rigs, this magazine placard provides 3 M4/AR-15 magazines and 3 pistol magazines, with adjustable retention so you can adjust to suit your playstyle. Tighten down the bungee cord toggles on the front for extra security, or loosen them off for a faster draw!

The Buckle Up Open Triple Rifle/Pistol Magazine Pouch is constructed from 1000D polyester, offering water resistance and ample strength thanks to its high stitch density. Patterned after real steel "taco" mag pouches, the pouches on this placard offer a great combination of speed and security, the ideal pairing for an 8Fields Buckle Up plate carrier!

The CYMA CGS Feed Lips & Gas Route Bucking Set for ZET System M4 GBBR provides 5 sets of feed lips and 5 gas route buckings for your magazines, allowing you to fix up old mags or keep spares handy just in case. This set is designed for TM ZET system M4 GBBR mags and should also fit clones of the TM design, including CYMA CGS M4 GBBR mags and Double Eagle M4 GBBR mags. 

The included feed lips are an ideal spare part to have on hand; as any experienced GBBR user will know, dropping a hefty gas mag is likely to break the lips and render the magazine useless. The Gas Route Buckings are also very useful in the event your magazine develops a leak from the top, and can also help improve gas efficiency should you decide to upgrade your TM or Double Eagle M4 GBBR with a steel CGS bolt carrier group. If you're getting in deep with ZET system GBBRs, this set belongs in your toolbox!

If you're running the Novritsch Modular 3D Ghillie Jacket, you'll need something to keep your noggin concealed! The Novritsch Modular 3D Ghillie Suit - Hood is designed to be mounted to the Novrtisch Modular 3D Ghillie Jacket via steel press studs and is available in all the same camo patterns as the jacket itself.

The hood includes sewn-in 3D leaves and elastic loops for natural foliage, allowing you to truly blend in with your surroundings and become a walking bush. If you're cutting around in the Novrtisch 3D Ghillie Jacket, this is essential!

If you're running the Novritsch Modular 3D Ghillie Jacket, you'll need something to keep your noggin concealed! The Novritsch Modular 3D Ghillie Suit - Hood is designed to be mounted to the Novrtisch Modular 3D Ghillie Jacket via steel press studs and is available in all the same camo patterns as the jacket itself.

The hood includes sewn-in 3D leaves and elastic loops for natural foliage, allowing you to truly blend in with your surroundings and become a walking bush. If you're cutting around in the Novrtisch 3D Ghillie Jacket, this is essential!

If you're running the Novritsch Modular 3D Ghillie Jacket, you'll need something to keep your noggin concealed! The Novritsch Modular 3D Ghillie Suit - Hood is designed to be mounted to the Novrtisch Modular 3D Ghillie Jacket via steel press studs and is available in all the same camo patterns as the jacket itself.

The hood includes sewn-in 3D leaves and elastic loops for natural foliage, allowing you to truly blend in with your surroundings and become a walking bush. If you're cutting around in the Novrtisch 3D Ghillie Jacket, this is essential!

If you're planning to upgrade your CYMA CM.700 or CM.708 sniper rifle, install this first! The CYMA Stainless Steel Cylinder for CM.700/708 Sniper Rifle is pre-assembled with a brass cylinder head, rubber O-ring and stainless steel cylinder with a welded bolt handle mount for maximum strength. The inner surface has been polished to reduce friction, improve efficiency and prevent excessive wear and tear when using strong springs. 

Compatibility-wise, this part set is only for the CYMA CM.700 and CM.708 series of spring-powered sniper rifles and is unlikely to work with other brands and models. As always, we only recommend upgrade parts like this for those with experience or the patience and willingness to learn. If you plan to install a super strong spring into your CM.700 or CM.708, this set should give it the strength it needs to last a lifetime!

If you love the looks of a 1911 but want Hi-capa performance, the RAVEN R14 Hi-capa GBB Pistol w/BDS Red Dot Sight is what you need. Based on the real steel Para Ordnance P14, this Hi-capa platform has the discrete looks of the venerable 1911 with its metal frame and textured grips but takes Hi-capa magazines, giving you the best of both worlds.

The advantage of a Hi-capa mag is its enormous gas reservoir, allowing for great performance under rapid fire and handling cold weather far better than the realistic but very slim 1911 mag. With a full metal build, a 6.03mm tightbore inner barrel pre-installed and a BDS red dot sight sitting on top of the slide for faster target acquisition, the RAVEN R14 w/BDS Red Dot Sight pairs a gorgeous retro aesthetic with modern, combat-ready features!

If you love the looks of a 1911 but want Hi-capa performance, the RAVEN R14 Hi-capa GBB Pistol w/BDS Red Dot Sight is what you need. Based on the real steel Para Ordnance P14, this Hi-capa platform has the discrete looks of the venerable 1911 with its metal frame and textured grips but takes Hi-capa magazines, giving you the best of both worlds.

The advantage of a Hi-capa mag is its enormous gas reservoir, allowing for great performance under rapid fire and handling cold weather far better than the realistic but very slim 1911 mag. With a full metal build, a 6.03mm tightbore inner barrel pre-installed and a BDS red dot sight sitting on top of the slide for faster target acquisition, the RAVEN R14 w/BDS Red Dot Sight pairs a gorgeous retro aesthetic with modern, combat-ready features!

If you like AKs but don't like their weight, the S&T AK-74N Sports Line AEG is the AK for you! This AK-74N replica is constructed from high-density polymer with choice alloy and steel parts to add strength where needed. This means, despite being an AK replica this beast tips the scales at a mere 2.3kg, giving it agile handling ideal for aggressive skirmishers or younger players with less physical strength.

Inside, we are treated to some thoughtful pre-upgraded parts, even in this cost-effective"Sports Line" AEG. The inner barrel is a 6.02mm tightbore example, offering improved accuracy and a slight raise in FPS from air seal improvements. The gearbox is version 3, with an alloy shell and steel 18:1 ratio gears running on 8mm steel slide bearings, meaning a smooth gearbox report with compatibility with common upgrade parts for those who want more. If you like the idea of a featherweight AK and are into the Cold War aesthetic, this is the AK to go for!

If you like compact sidearms with an elite look, the VORSK Hi-Capa Vengeance Compact w/Red Dot Sight is one to watch. This full metal Hi-Capa platform marries the 3.8-inch barrel length of the most compact Hi-Capa pistols with the full-sized 5.1 frame, giving you the design philosophy of the Glock 19X in Hi-Capa form. 

Like other Hi-Capas in the VORSK CS range, the Hi-Capa Vengeance Compact boasts full metal construction, a 6.03mm tightbore inner barrel to enhance accuracy and a threaded outer barrel with a 14mm thread adapter so you can mount a tracer right away. This, the "BDS" version is also equipped with a red dot sight, pre-installed on a fixed position mount for fast target acquisition and even faster follow-up shots when compared to pistols equipped with a slide-mounted red dot sight. 

If owning a customised Hi-Capa is on your list, the VORSK Hi-Capa Vengeance Compact w/Red Dot Sight has done all the work for you! With the high-end aesthetic on the outside and a 6.03mm tightbore barrel on the inside, the Vengeance Compact with red dot sight is ready to rock either as a sidearm or a CQB primary!

If you're in search of a slick, modern AK to complete your PMC loadout, the Specna Arms SA-J06 EDGE™ AK-74 Tactical AEG w/Gate ASTER MOSFET is one to watch. This full metal AK AEG boasts a large proportion of steel in its build and is rocking an M-LOK/20mm Picatinny hybrid handguard, 20mm railed gas block and M4/AR-15 buffer tube, sidestepping the usual utilitarian AK ergonomics for vast handling and modularity improvements. 

Inside, things get even better! The ORION reinforced gearbox is present, equipped with an aluminium piston head and cylinder head, a steel-toothed polycarbonate piston and reinforced steel gears. This superb, hard-wearing gearbox is backed up by the advanced Gate ASTER MOSFET, one of our favourite electronic trigger units offering absolutely loads of programmable functions via the Gate Control Station App along with vast improvements in rate of fire and trigger response. If you're planning a tactical AK build, the Specna Arms SA-J06 EDGE™ AK-74 Tactical AEG w/Gate ASTER MOSFET will save you a lot of work!

If you're looking for a modernised full metal M4A1, the DA-A02-ETU ALPHA™ M4A1 RAS AEG from Delta Armory is exactly that. This ALPHA™ line AEG boasts Delta Armory's best internals yet, featuring reinforced internal parts from SHS, CNC aluminium cylinder group parts, CNC machined 16:1 steel gears and a high torque motor, backed up by the Delta Armory programmable MOSFET/ETU system. The Delta ETU offers the option for burst mode, binary trigger and pre-cocking, all of which can be programmed in using the fire controls of the AEG itself. 

On the outside Delta has added a gunfighter mod.3 style pistol grip, a slimline crane-style stock and an enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. This gives the now old-school M4A1 a bit of a refresh without ruining its iconic outline and maintaining suitability for both casual and Milsim skirmishes. If you love the M4A1 silhouette but want more modern ergonomics, the Delta Armory DA-A02-ETU ALPHA™ M4A1 RAS AEG is ideal!