Airsoft Mounts

If you want to snipe with your KAR98K this should help you get there! The Double Bell Scope Mount For KAR98K is designed specifically for the Double Bell KAR98K and mounts to the receiver rail on the left side of the rifle, just below the rear iron sight. The mount is intended for scopes with a 20mm monotube and is constructed from alloy with steel screws and a steel release lever.

When choosing a scope for this mount we recommend looking for a scope with an objective lens of less than 30mm in diameter, a 20mm monotube and long eye relief due to the "Scout" style mount location positioned closer to the front of the rifle than the average scope mount.

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount will sort that out! This mount is designed for old-school magnifiers which use a ring-style mount, offering compatibility with most 30mm tube magnifiers including the Vector Optics Flip To Side Magnifier.

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers theFAST Riser,FAST MRO Mount andFAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you're running face protection and don't want to ditch your magnifier, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount is what you need!

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount will sort that out! This mount is designed for old-school magnifiers which use a ring-style mount, offering compatibility with most 30mm tube magnifiers including the Vector Optics Flip To Side Magnifier.

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers theFAST Riser,FAST MRO Mount andFAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you're running face protection and don't want to ditch your magnifier, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount is what you need!

If you're rocking a Unity Fusion mount, the WADSN Offset Rail for Fusion Mounts should interest you! This CNC aluminium mount is compatible with Unity-style Fusion mounts and provides an offset 20mm Picatinny rail with 5 rail slots, ideal for flashlights and laser aiming modules. This rail mount is only compatible with Fusion style mounts and includes two steel bolts to mount it and the correct Allen key so you don't need to rummage in your toolbox!

If you're building out your AK to match the latest real steel builds, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is essential. Based on real steel Zco-style red dot risers, this aluminium component fits replica Zco-style handguards such as the 5KU Lightweight Zco-style Lower Handguard. It will only attach to these styles of handguards due to the unique attachment interface.

Atop the riser is a section of 20mm Picatinny rail, perfect for mounting a red dot that matches the modern Russian design. If your modern Zco-style AK requires optic space for longer-range engagements, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is the piece of equipment for you.

If you need to mount an optic on your VZ.58, this is essential! The Ares Side Rail Mount for VZ.58 AEG is compatible with the Ares and Delta Armory VZ.58 AEGs and allows a VZ.58 scope mount to be fitted. The set includes the side rail itself and the mounting bolts. Please note, this side rail is only compatible with Ares VZ.58 scope mounts and is NOT compatible with AK or SVD mounts. 

The perfect way to securely mount your scope onto your Airsoft gun, allowing you to get the best possible accuracy from your scope when aiming. 

If you're rocking the AAP-01 or AAP-01C and need a red dot sight to finish it off, the Action Army RMR Plate & Raised Sights Set for AAP-01 is the key. This set includes a raised front sight with a light-enhancing insert and a fixed rear sight with an integral RMR footprint mount plate, allowing you to mount a micro red dot sight for improved low-light accuracy and faster target acquisition!

Both the front sight and the rear sight/mount plate are constructed from steel, making them extremely robust and ideal for the aggressive skirmisher. This kit fits both the original AAP-01 Assassin and AAP-01C Shinobi but isn't compatible with the Action Army Folding Stock Kit. If you run your AAP-01 as a sidearm but need to get on target faster, pair the Action Army RMR Plate & Raised Sights Set for AAP-01 with an RMR footprint red dot sight and get busy!

If you're running the PTS FAST LPVO mount and want a quick way to engage close-range threats, the PTS Syndicate Unity Tactical Top Ring for FAST LPVO Mount w/MRDS Adjustable Plate lets you do just that. This set includes an upper scope ring for the PTS FAST LPVO mount, a screw set and the PTS MRDS modular mount plate.

Designed to fit practically any common MRDS footprint, the PTS Modular MRDS plate mounts to the top of the included ring, which itself can be used to replace either the front or rear ring on your PTS FAST LPVO mount. The MRDS mount is confirmed to fit Docter, RMR®, Shield RMS/ RMSc, Sig Romeo Pistol Red Dot Sight, C-more, Sightmark M-Spec, Holosun-K and DeltaPoint® Pro footprint red dot sights.

If you've ever missed a kill because you were busy adjusting magnification, the PTS Syndicate Unity Tactical Top Ring for FAST LPVO Mount w/MRDS Adjustable Plate with an MRDS installed will ensure that never happens again!

If you're running the PTS FAST LPVO mount and want a quick way to engage close-range threats, the PTS Syndicate Unity Tactical Top Ring for FAST LPVO Mount w/MRDS Adjustable Plate lets you do just that. This set includes an upper scope ring for the PTS FAST LPVO mount, a screw set and the PTS MRDS modular mount plate.

Designed to fit practically any common MRDS footprint, the PTS Modular MRDS plate mounts to the top of the included ring, which itself can be used to replace either the front or rear ring on your PTS FAST LPVO mount. The MRDS mount is confirmed to fit Docter, RMR®, Shield RMS/ RMSc, Sig Romeo Pistol Red Dot Sight, C-more, Sightmark M-Spec, Holosun-K and DeltaPoint® Pro footprint red dot sights.

If you've ever missed a kill because you were busy adjusting magnification, the PTS Syndicate Unity Tactical Top Ring for FAST LPVO Mount w/MRDS Adjustable Plate with an MRDS installed will ensure that never happens again!

The KAR98k Steel Scope Rail Mount from Vector Optics mounts to your KAR98k receiver (following modification - see Special Instructions) and provides two slots of Picatinny rail, ideally suited to mounting a rifle scope with separate mount rings. This mount is intended for use on real rifles, but does match the geometry of the Airsoft receivers should you choose to add it to your Airsoft build.

If you like the style of micro red dots and want to mount one on your rifle at a comfortable height, then you need this! The PTS Syndicate Unity Tactical Fast™ MRDS mounts on 20mm Picatinny rails and includes an MRDS Adjustable Plate that fits most micro red dot footprints. These footprints include Docter, RMR®, Shield RMS/ RMSc, Sig Romeo Pistol Red Dot Sight, C-more, Sightmark M-Spec, Holosun-K and DeltaPoint® Pro footprint red dot sights.

It is constructed from CNC 6000 aluminium, making it durable and lightweight, perfect for agile skirmishers who like to keep a low profile on the battlefield. If you aim best with a micro red dot and want to comfortably mount one on something other than your pistol, you need the PTS Syndicate Unity Tactical Fast™ MRDS Mount w/MRDS Adjustable Plate!

If you need a bit more height on your optic for a clear view with full face protection, the Delta Armory 3-Slot 20mm Picatinny Riser Mount for Red Dot Sights will do the trick. This riser mount provides a 3-slot 20mm Picatinny rail approximately 1 inch (25mm) above the surface of the rail it is mounted to, raising the optic to M4/AR-15 height over bore. This means it will align perfectly with an M4/AR-15 front sight post and most flip-up iron sights; ideal for those who like to "co-witness" their optic and irons. 

If you find you have to bend your neck to get a good view down your red dot sight, a riser is what you need. This riser can be mounted to any 20mm Picatinny railed receiver and is ideal for small "micro red dot sights" like the T1/2 and Docter/RMR style red dot sights due to its compact size.

The Delta Armory 22mm Offset Angled Mount has an aluminium alloy construction, making it tough and lightweight. It is designed to install Torches, Lasers and other 20mm RIS Accessories at a 45-degree angle, which allows you to maximise the available space you have on your Airsoft Gun.

An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories. Although designed for torches, this rail could also be used to mount an offset Red Dot Sight to use as a backup to your main sight. The Delta Armory 22mm Offset Angled Mount easily attaches to 20mm Rails via the Allen Screw on the side of the unit.

The UNITY mounts are being favoured world wide due to their slim profile & efficient riser, making them an excellent candidate for using with PEQ / Laser pointers mounted on the upper rail.

The UNITY mounts are being favoured world wide due to their slim profile & efficient riser, making them an excellent candidate for using with PEQ / Laser pointers mounted on the upper rail.

If you're looking for an M-LOK QD sling socket which is ergonomically designed and won't contort your sling, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice. Designed as an alternative to built-in QD sling sockets and standard flat sockets, when installed, this socket faces the shooter, resulting in a more comfortable sling position and less chance of tangles.

Constructed from high-density polymer with a steel QD cup, this socket should be compatible with most QD sling swivels on the market, allowing you to install or disconnect your sling quickly. Due to differences in tolerance between manufacturers, we suggest thoroughly testing this socket before entrusting it with any weight unless you're using it with a PTS-branded QD swivel. If you find the built-in QD sockets on your handguard are positioned suboptimally or don't have any QD sockets on your M-LOK handguard, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice!

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer.

Attached to M-LOK system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. This mount is unique in that a scout flashlight can be mounted directly to the mount using screws thus saving you a bit of weight and space. Of course other devices can be mounted using the Picatinny rail.

The rail is a 20mm Picatinny type, measuring roughly 1.25 inches and is attached to M-LOK system using the included screws, nuts and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

A compact Riser Mount for 20mm Rail Systems, which allows you to mount a Red Dot Sight higher than it normally would, which is useful for Lower Face Protection users who struggle to aim down their sights. By mounting you Red Dot higher, you can look down the sight even whilst wearing something to protect your mouth, such as a Lower Face Mesh Mask.

These scope rings are designed to hold an Airsoft rifle scope with a tube diameter of 30mm. Scope rings are useful as they allow you to attach your scope to very small sections of Picatinny rail, such as the small sections often found on sniper rifles. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. 

Being a two-piece design they are very easy to install. The scope rings mount to standard Picatinny rail sections, often found atop your Airsoft platform. To secure your rifle scope, you must use an Allen key to take off the top sections of the rings, then place your scope in and reattach the top sections of the rings. 

If you want to rock a red dot on your SSP18, add the Novrtisch SSP18 Red Dot Plate V2! This CNC aluminium red dot plate replaces the rear sight and allows the Novritsch Red Dot Sight - Micro V2 to be mounted, providing faster target acquisition and improved low-light visibility. 

The Red Dot Plate V2 is available in several colour options, from tactical black to eye-catching metallic colours which will really make your SSP18 stand out. Whether you're planning on using your SSP18 as a primary or you want your sidearm to be at the cutting edge of modern handgun configurations, the Novritsch SSP18 Red Dot Plate V2 is ideal!

If you want to take pure advantage of the superb accuracy and range of the Novritsch SSX23 NBB pistol, the Novritsch SSX23 Red Dot Plate V2 is what you need! This red dot mount plate is constructed from CNC machined aluminium and designed to mount directly to the SSX23 slide, providing mounting holes for the Novritsch Red Dot Micro V2 and other red dot sights which use the Leupold DeltaPoint Pro® mounting standard/footprint. 

Adding a red dot sight can make all the difference, especially when installed on a long range beast like the SSX23. If you want to acquire your targets faster, aim intuitively in low-light conditions and make your SSX23 look amazing, the Novritsch SSX23 Red Dot Plate V2 gets you half way there!

The WADSN 5 Position Flashlight Mount is a great way to attach your flashlight to your platforms. It mounts to a 20mm RIS/RAS rail, which is the most common rail found on rifles and SMGs. There is a choice of black or dark earth so you can match the mount perfectly to fit the style of your loadout. It features 5 adjustable positions so you can find the perfect setup for your loadout and ensure you dominate any CQB skirmish!

To fit your flashlight you must first loosen the two screws found at the front and back of this mount, once loose, you can slide your torch in. Afterwards, tighten the screws up again and your flashlight and mount are ready to go! The polymer construction means you don't need to worry about having a front-heavy Airsoft gun once fitted. Mount your flashlight using the WADSN 5 Position Flashlight Mount and become a master of close-quarters surprise engagements!

The WADSN 5 Position Flashlight Mount is a great way to attach your flashlight to your platforms. It mounts to a 20mm RIS/RAS rail, which is the most common rail found on rifles and SMGs. There is a choice of black or dark earth so you can match the mount perfectly to fit the style of your loadout. It features 5 adjustable positions so you can find the perfect setup for your loadout and ensure you dominate any CQB skirmish!

To fit your flashlight you must first loosen the two screws found at the front and back of this mount, once loose, you can slide your torch in. Afterwards, tighten the screws up again and your flashlight and mount are ready to go! The polymer construction means you don't need to worry about having a front-heavy Airsoft gun once fitted. Mount your flashlight using the WADSN 5 Position Flashlight Mount and become a master of close-quarters surprise engagements!

If you're in search of a sling solution which easy to mount and remove, the Vector Optics QD Sling Socket & Swivel for 20mm Picatinny Rails is ideal. This set includes a QD sling socket for 20mm Picatinny rails and a QD sling swivel, allowing you to quickly remove your sling without the usual detangling process. The included swivel should fit most slings on the market and is constructed from steel for maximum strength. 

To release the swivel from the socket, simply press the central button and it will pop straight out. Remounting it is as simple as pushing the swivel back into the socket where it will lock in place. The socket should also be compatible with aftermarket QD swivels but due to differing specs between manufacturers, we always advise giving the swivel a thorough test before entrusting it with the weight of your platform. 

A pair of scope mounts designed to raise your optic for a more comfortable optic setup.

The UNITY Tactical mounts are being favoured worldwide due to their slim profile & efficient elevation, making them an excellent candidate for use with PEQ / Laser pointers mounted on the upper rail or for bringing your optic over your irons.

The UNITY Tactical mounts are being favoured worldwide due to their slim profile & efficient elevation, making them an excellent candidate for use with PEQ / Laser pointers mounted on the upper rail or for bringing your optic over your irons.

If you're following modern real steel trends and want a red dot on your sidearm, Airsoft Artisan has what you need! The RMR Mount w/ Front & Rear Sight for WE EU17 GBB includes a front and rear sight with an integral RMR footprint mount plate, allowing you to rock an RMR-style red dot sight paired with a cutting-edge iron sight setup on your WE EU series GBB pistol. 

The front sight includes a red light-enhancing insert and the rear sight features anti-glare checkering, giving you an up-to-date sight setup which is great in both bright and dark conditions. The sights are also set at "suppressor height", meaning if you've got a sneaky build planned or are running a tracer you can still get a clean sight picture. 

The plate itself is designed for RMR footprint red dot sights, meaning most RMR clones should fit including our PCS Miniature Red Dot Reflex Sight. This set is designed for the WE EU17 GBB and as such should also fit WE EU19 and EU34 GBB pistols but won't fit WE EU18 GBB pistols due to their redesigned slide. If your EU series needs a touch of modernity, the Airsoft Artisan RMR Mount w/ Front & Rear Sight for WE EU17 GBB will provide!

If you're in need of an RMR mounting plate for your Army Armament STACCATO pistol, then you've come to the right place! This plate is the perfect accessory for those wanting to mount a red dot sight to their pistol for some extra accuracy whilst out on the battlefield. It is constructed from aluminium and comes with the necessary steel mounting screws to attach this plate to your pistol.

It is compatible with red dot sights that have an RMR footprint, such as the PCS Miniature Red Dot Reflex Sight. If you're looking for a replacement RMR plate, or you need one to mount your desired red dot, the Army Armament Staccato RMR Mounting Plate is perfect for you.