Airsoft Mounts

If you want to give your Glock sidearm a more menacing look, the Airsoft Artisan Rail-Mounted Compensator for Glock 17 & 18C GBB will do the trick! A truly gorgeous piece of CNC-machined aluminium with a hard-wearing anodised finish, this compensator is rail-mounted, meaning it won't mess with accuracy or compromise gas efficiency, unlike compensators which mount to the barrel. 

The compensator includes a built-in 20mm Picatinny rail, ready for your choice of tactical flashlight or laser aiming module. Compatibility-wise, this comp is specifically for the "service pistol" sized Glocks, the Glock 17 and Glock 18C, and won't fit other Glock designs. Give your Glock a sprinkle of aggression with this stylish and superbly made compensator from Airsoft Artisan!

If you're looking for ways to make your M4/AR-15 AEG build stand out, the Colour-Coordinated Accessory Kit for M4/AR-15 AEG Rifles from CYMA is what you need. A complete set of M4/AR-15 AEG trim parts made from robust alloy, these parts should be compatible with most TM-spec M4/AR-15 AEGs, potentially requiring modification for certain brands. In the case of full metal build CYMA M4s, these will be a drop-in fit. 

The set includes a 6-position M4/AR-15 buffer tube, a charging handle with spring, a dust cover with lock, a stylish ported trigger, a mock bolt catch, a fire selector switch, a sling plate, and a magazine catch, all finished in either Red or Blue. If your AR build could use a side of style, the CYMA Colour-Coordinated Accessory Kit for M4/AR-15 AEG Rifles is what you need!

If you're looking for ways to make your M4/AR-15 AEG build stand out, the Colour-Coordinated Accessory Kit for M4/AR-15 AEG Rifles from CYMA is what you need. A complete set of M4/AR-15 AEG trim parts made from robust alloy, these parts should be compatible with most TM-spec M4/AR-15 AEGs, potentially requiring modification for certain brands. In the case of full metal build CYMA M4s, these will be a drop-in fit. 

The set includes a 6-position M4/AR-15 buffer tube, a charging handle with spring, a dust cover with lock, a stylish ported trigger, a mock bolt catch, a fire selector switch, a sling plate, and a magazine catch, all finished in either Red or Blue. If your AR build could use a side of style, the CYMA Colour-Coordinated Accessory Kit for M4/AR-15 AEG Rifles is what you need!

If you're running an AMD-65 or AK and need more rails, the Airsoft Artisan AMD-65/AK 20mm Picatinny Rail Mount was made with you in mind! Immaculately machined from aluminium using CNC technology with a hard-wearing finish, this rail mount is designed to mount between the barrel and gas tube, on the rear of the gas block, providing 20mm Picatinny rails on each side with QD sling sockets built in. 

Compatibility-wise, this should fit AMD-65 replicas perfectly and can also be paired with most AK-47/74 replicas, though you may need to carry out modifications or change parts for a perfect fit. 

If you're running an AMD-65 or AK and need more rails, the Airsoft Artisan AMD-65/AK 20mm Picatinny Rail Mount was made with you in mind! Immaculately machined from aluminium using CNC technology with a hard-wearing finish, this rail mount is designed to mount between the barrel and gas tube, on the rear of the gas block, providing 20mm Picatinny rails on each side with QD sling sockets built in. 

Compatibility-wise, this should fit AMD-65 replicas perfectly and can also be paired with most AK-47/74 replicas, though you may need to carry out modifications or change parts for a perfect fit. 

Not a fan of SMG-5 dioptre sights? I'm not sure how, but if they don't suit you then here's a way you can still shoot sharp with your SMG-5/MP5 AEG. Allows mounting of red dot sights and shorter length magnified optics. Looks extra cool with an MRDS on!

If you want to dress your AK up with some shiny western optics you'll need a 20mm rail adapter! Thankfully, CYMA has this covered with the 20mm Picatinny Railed Scope Mount For AK Side Rail, offering a quick detachable mount with a 20mm Picatinny rail of approximately 13.5cm in length. This mount fits the AK-style side rail found on most AK-74 and AK-10x series AEGs and is constructed from alloy to provide the strength necessary for a reliable zero.

The QD lever and mounting bolt are constructed from steel and can be adjusted by loosening or tightening the bolt, making it easy to get a rock solid and wobble-free mounting interface with the vast majority of AK-type side rails out there. If you want your AK to run the same snazzy accessories your M4 does this adapter is ideal!

If you're kitting out your M-LOK handguard, the Specna Arms SAAS M-LOK Angular Front Grip is a solid foregrip option! Made from lightweight aluminium, this innovative foregrip includes a built-in QD sling socket on the rear facing the shooter, saving space to make your M-LOK slots go that bit further!

The contact surface of the SAAS Angular Front Grip is serrated for maximum traction in any weather conditions and includes an integral hand stop to prevent your hand from going past the handguard and into the danger zone. If you're after an angled foregrip for M-LOK and you also need a QD sling point, the Specna Arms SAAS M-LOK Angular Front Grip is your perfect combination!

If you are having a hard time seeing down your low-profile red dot sight, a rail riser will make all the difference! The Vector Optics 0.83" 20mm Picatinny Rail Riser Mount is designed to assist those who struggle to see down their red dot sight, either because of a very low profile mount, a full face mask or neck pain.

The riser offers a 4cm length of 20mm Picatinny rail raised 0.83"/2.2cm above the height of the original rail to which it is mounted. Being constructed from aluminium with a steel mounting bolt, this riser keeps added weight to an absolute minimum. Mounting the riser is as simple as mounting your red dot; simply align it with your rail and tighten down the thumb screw on the side. The centre of the riser is also milled out to provide a channel through which the iron sights on certain platforms can still be used which also helps with weight reduction.

If you are having a hard time getting your face low enough to see through your optic, this riser should solve that issue and get you shooting straight!

This High Profile Rail Riser is designed for any 20mm RIS/RAS Accessory, and is designed to lift it up off the Rail. This is particularly useful for those trying to use a Lower Face Mask with a Red Dot Sight, as you might find that you Mask stops you from aiming down your standard Rail System.

If you're in search of a sling solution which easy to mount and remove, the Vector Optics QD Sling Socket & Swivel for 20mm Picatinny Rails is ideal. This set includes a QD sling socket for 20mm Picatinny rails and a QD sling swivel, allowing you to quickly remove your sling without the usual detangling process. The included swivel should fit most slings on the market and is constructed from steel for maximum strength. 

To release the swivel from the socket, simply press the central button and it will pop straight out. Remounting it is as simple as pushing the swivel back into the socket where it will lock in place. The socket should also be compatible with aftermarket QD swivels but due to differing specs between manufacturers, we always advise giving the swivel a thorough test before entrusting it with the weight of your platform. 

The QD Sling Swivel Adapter from 8Fields Tactical is intended to work with QD sling sockets to provide a quick swappable sling solution. The set includes a steel QD sling swivel and an extension strap with an elastic cover and a polymer buckle. To connect the adapter to your QD sling socket all you need to do is push the swivel into the socket, where it will lock in place. To remove it simply press the button at the centre of the swivel which will release it from the socket. With this sling adapter you have the choice, you can either mount your sling directly to the steel swivel or make use of the extension strap for a bit more flexibility.

The QD Sling Swivel Adapter from 8Fields Tactical is intended to work with QD sling sockets to provide a quick swappable sling solution. The set includes a steel QD sling swivel and an extension strap with an elastic cover and a polymer buckle. To connect the adapter to your QD sling socket all you need to do is push the swivel into the socket, where it will lock in place. To remove it simply press the button at the centre of the swivel which will release it from the socket. With this sling adapter you have the choice, you can either mount your sling directly to the steel swivel or make use of the extension strap for a bit more flexibility.

The QD Sling Swivel Adapter from 8Fields Tactical is intended to work with QD sling sockets to provide a quick swappable sling solution. The set includes a steel QD sling swivel and an extension strap with an elastic cover and a polymer buckle. To connect the adapter to your QD sling socket all you need to do is push the swivel into the socket, where it will lock in place. To remove it simply press the button at the centre of the swivel which will release it from the socket. With this sling adapter you have the choice, you can either mount your sling directly to the steel swivel or make use of the extension strap for a bit more flexibility.

The QD Sling Swivel Adapter from 8Fields Tactical is intended to work with QD sling sockets to provide a quick swappable sling solution. The set includes a steel QD sling swivel and an extension strap with an elastic cover and a polymer buckle. To connect the adapter to your QD sling socket all you need to do is push the swivel into the socket, where it will lock in place. To remove it simply press the button at the centre of the swivel which will release it from the socket. With this sling adapter you have the choice, you can either mount your sling directly to the steel swivel or make use of the extension strap for a bit more flexibility.

If you have QD sling sockets on your Airsoft rifle it would be rude not to take pure advantage and set your rifle up with a highly flexible sling setup which can be installed, altered and removed in mere seconds! 

This QD sling swivel from CYMA fits any QD sling socket and provides a wide "loop" style mount, to which a sling of practically any style can be mounted. To install the swivel onto a QD socket, simply push it into the socket and it will automatically lock in place. 

To disconnect the swivel all you need to do is press the button in the centre which will release the retention and disconnect the swivel from the socket on the rifle. This QD swivel can be rotated to any angle, guaranteeing the utmost comfort no matter which sling style you choose!

A compact Riser Mount for 20mm Rail Systems, which allows you to mount a Red Dot Sight higher than it normally would, which is useful for Lower Face Protection users who struggle to aim down their sights. By mounting you Red Dot higher, you can look down the sight even whilst wearing something to protect your mouth, such as a Lower Face Mesh Mask.

An Alloy constructed mount for the M14/M1A platform, which secures above the ejection port via the threads on the side of the receiver and allows you to mount 20mm compatible accessories/sights.

A quick-detach sling loop point and sling loop for KeyMod rail systems, allowing you to attach a sling to any point on a KeyMod system.

Not a fan of SMG-5 dioptre sights? I'm not sure how, but if they don't suit you then here's a way you can still shoot sharp with your SMG-5/MP5 AEG. Allows mounting of red dot sights and shorter length magnified optics. Looks extra cool with an MRDS on!

A compact Riser Mount for 20mm Rail Systems, which allows you to mount a Red Dot Sight higher than it normally would, which is useful for Lower Face Protection users who struggle to aim down their sights. By mounting you Red Dot higher, you can look down the sight even whilst wearing something to protect your mouth, such as a Lower Face Mesh Mask.

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer. Attached to M-LOK system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories.

The rail is a 20mm Picatinny type, measuring roughly 2.5 inches and is attached to M-LOK system using the included screws, nuts and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

If you want to add a western red dot sight or scope to your AK platform this adapter will do it! The M-ETAL 20mm Picatinny Railed Scope Mount for AK Side Rail fits AK-style side rails present on most AK-74 and AK-10x style AEG and GBB rifles and provides a 20mm Picatinny rail of approximately 17cm in overall length.

The mount attaches via a QD locking mechanism constructed from steel, meaning you can quickly add and remove your optic to suit the requirements of the mission and even switch between a red dot sight and telescopic sight if you have a mount for each optic. If your AK needs the benefits of western 20mm Picatinny sight options this adapter is a must!

The AK series of rifles is famous for many things, but having the best iron sights is not one of them. The AK Rear Sight Rail For Red Dot Optics from 5KU replaces your AK's rear iron sight but retains basic functionality with its built-in emergency backup sights while providing the option to mount a red dot sight!

Designed specifically for Micro red dot sights, the 8 20mm Picatinny rail slots provide plenty of room for larger red dots but it would look rather silly. It's your AK though, make the purists cry if you feel like it!

A set of two High Profile Scope Mount Rings, which will accept a 25mm Optic and easily install to 20mm RIS/RAS/Picatinny Rail Systems. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. Being a two-piece design, and coming included with an Allen Key, they are very easy to install.

Designed to broaden sling compatibility for any platform with any type of non-QD sling point, the EmersonGear Universal Sling Adaptor provides extra flexibility and allows even the smallest and most awkwardly shaped sling points to work with the most common slings on the market. If you're running a pistol with a lanyard loop, you can even use this adapter to give you more flexibility while keeping your pistol safely tethered to your belt.

Running an AR-36 and want to use the receiver sling point? Add the Universal Sling Adapter and you're ready to rock! Likewise, SMG-5 and SMG-7/MP7 sling points are a tad on the small side for standard "HK hook" type slings; with the Universal Sling Adapter, you get your primary slung with ease.

Even if you don't have a sling point on board, this adapter's versatile design allows you to loop it through vent ports on handguards, stocks and practically wherever you need it. You can even mount it to MOLLE loops and use it to store your car keys! One of the most underrated bits of kit we stock, the EmersonGear Universal Sling Adapter has about a million uses. Why not grab one just in case?

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer.

Attached to M-LOK system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. This mount is unique in that a scout flashlight can be mounted directly to the mount using screws thus saving you a bit of weight and space. Of course other devices can be mounted using the Picatinny rail.

The rail is a 20mm Picatinny type, measuring roughly 1.25 inches and is attached to M-LOK system using the included screws, nuts and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

An Aluminium constructed Mount for Airsoft SVD and SVU Platform Rifles, which connects to the Dovetail Side Rail and provides a perfectly-aligned 20mm Rail on top of your Rifle, for the attachment of Sights and Scopes.

If you're struggling to get a good view through your red dot sight when wearing face protection, the WADSN High 20mm Picatinny Mount for T1/T2 Red Dot & PEQ Box will solve that issue! This raised optic mount is patterned after real steel "Hydra" mounts, offering a raised mount for T1/T2 style red dot sights and a 20mm Picatinny rail for a PEQ/DBAL laser unit or scope camera. This mount is designed for 20mm Picatinny rails and includes a pair of "recoil lugs" on the bottom which hold it in place firmly on your rail.

The High 20mm Picatinny Mount for T1/T2 Red Dot & PEQ Box should fit most T1 and T2 clones provided they correctly replicate the real Aimpoint Micro mounting standard and is also compatible with the Novritsch Red Dot Sight V3, Vector Optics Maverick, Vortex Sparc Solar and Holosun 403B. Being slightly higher than a standard T1 mount, the High 20mm Picatinny Mount for T1/T2 Red Dot & PEQ Box is ideal for those who have a hard time getting a clear sight picture using full face protection, being designed in the real world for use with respirators and night vision devices.

If you're struggling to get a good view through your red dot sight when wearing face protection, the WADSN High 20mm Picatinny Mount for T1/T2 Red Dot & PEQ Box will solve that issue! This raised optic mount is patterned after real steel "Hydra" mounts, offering a raised mount for T1/T2 style red dot sights and a 20mm Picatinny rail for a PEQ/DBAL laser unit or scope camera. This mount is designed for 20mm Picatinny rails and includes a pair of "recoil lugs" on the bottom which hold it in place firmly on your rail.

The High 20mm Picatinny Mount for T1/T2 Red Dot & PEQ Box should fit most T1 and T2 clones provided they correctly replicate the real Aimpoint Micro mounting standard and is also compatible with the Novritsch Red Dot Sight V3, Vector Optics Maverick, Vortex Sparc Solar and Holosun 403B. Being slightly higher than a standard T1 mount, the High 20mm Picatinny Mount for T1/T2 Red Dot & PEQ Box is ideal for those who have a hard time getting a clear sight picture using full face protection, being designed in the real world for use with respirators and night vision devices.

The M-ETAL QD Sling Point for M-Lok and KeyMod Rails offers a high-quality and reliable way to attach a sling to your platform of choice. The QD mechanism is secured by four steel ball bearings, which lock firmly into place and are released with a simple press of the central button for fast attachment and removal.

This version is compatible with both M-LOK and KeyMod rail systems. Installation is quick and straightforward: loosely assemble the adaptor using the included Allen key, slide it into your M-LOK or KeyMod rail, then tighten to secure it in place. Once fitted, you can easily attach or detach your QD sling swivel as needed.

Perfect for dynamic gameplay, this adaptor allows you to transition smoothly without the hassle of dealing with more traditional sling setups.

If you're struggling to get a good view through your red dot sight when wearing face protection, the WADSN 20mm Picatinny Riser for Red Dots & PEQ Box will solve that issue! This raised optic mount is patterned after real steel "Hydra" mounts, offering a raised mount for red dot sights and an adjacent 20mm Picatinny rail for a PEQ/DBAL laser unit or scope camera. This mount is designed for 20mm Picatinny rails and includes a pair of "recoil lugs" on the bottom, which hold it in place firmly on your rail.

The 20mm Picatinny Riser for Red Dots & PEQ Box will fit most Airsoft red dot sights, provided they have a Picatinny mount. The Picatinny rail also means you can mount additional risers, which is ideal for those who have a hard time getting a clear sight picture using full face protection, respirators and night vision devices.

If you're struggling to get a good view through your red dot sight when wearing face protection, the WADSN 20mm Picatinny Riser for Red Dots & PEQ Box will solve that issue! This raised optic mount is patterned after real steel "Hydra" mounts, offering a raised mount for red dot sights and an adjacent 20mm Picatinny rail for a PEQ/DBAL laser unit or scope camera. This mount is designed for 20mm Picatinny rails and includes a pair of "recoil lugs" on the bottom, which hold it in place firmly on your rail.

The 20mm Picatinny Riser for Red Dots & PEQ Box will fit most Airsoft red dot sights, provided they have a Picatinny mount. The Picatinny rail also means you can mount additional risers, which is ideal for those who have a hard time getting a clear sight picture using full face protection, respirators and night vision devices.

A set of Two Scope Rings for 25mm Optics, which easily attach to 20mm RIS/RAS Rail Systems to install your Rifle Scope on an Airsoft Gun. They have a two piece design which makes installation very easy, and come included with an Allen Key to help. These rings are Low Profile, meaning your Scope will be mounted snugly to your Rail System.

A set of two High Profile Scope Rings for 30mm Optics, that will easily connect to 20mm RIS/RAS Picatinny Rail Systems. They have a two-piece design which makes installation very easy, and comes included an Alley Key to aid installation. They are High Profile Rings which will hold the Scope higher than standard, making it easier to aim whilst wearing Lower Face Protection.

A KeyMod attachment for KeyMod Rails which provides a Quick Detach Sling Loop Mounting Point, making it easy to quickly add and remove slings from your rifle.

If you want to add some extra accessories to your AK but you approve of neither top cover mounted optics nor the Russian side rail, this railed gas tube should do the trick! Based on the real steel UltiMAK design, the CYMA 20mm Picatinny Railed Gas Tube for AK47/74 AEG replaces the gas tube and upper handguard of your AK AEG with an aluminium enhanced gas tube with a 20mm Picatinny rail milled into its upper surface.

This style of rail has found its way onto many AKs used in the hands of both PMCs operating in the middle east and civilian tactical shooters in the US and is a great way to mount forward mounted red dot sights and tactical flashlights without doing anything weird to the receiver itself. This part is designed for the CM.04x series of AK AEGs from CYMA but will not fit AKS-74U AEGs due to the length.

If you are having a hard time seeing down your low-profile red dot sight, this rail riser will make all the difference! The PJ 0.83" Mini Riser Block Mount is designed to assist those who struggle to see down their red dot sight, either because of a very low profile mount, a full face mask or neck pain.

The riser offers a 4cm length of 20mm Picatinny rail raised 0.83"/2.2cm above the height of the original rail to which it is mounted. Being constructed from aluminium with a steel mounting bolt, this riser keeps added weight to an absolute minimum. Mounting the riser is as simple as mounting your red dot; simply align it with your rail and tighten down the thumb screw on the side.

If you are having a hard time getting your face low enough to see through your optic, this riser should solve that issue and get you shooting straight

If you have seen Saving Private Ryan and now you want a scoped Springfield rifle, this should get you there! The S&T 20mm Rifle Scope Mount for M1903A3 Springfield is constructed from aluminium and accepts common 20mm Picatinny scope rings, allowing you to fit whatever scope you desire to your Springfield provided the rings can be spaced to fit the mount. The spacing between the two rail sections is 7.5cm approximately, meaning most telescopic sights with separate rings will fit right on with the rings in the right position.

The mount replaces your rear iron sight and sits over the receiver when installed and requires additional screws (not included) to attach it to the rifle. Please note, this mount will not work with optics which have built-in 20mm rail mounts and is intended for use with optics which use separate scope rings.

If you're in need of an RMR mounting plate for your Army Armament STACCATO pistol, then you've come to the right place! This plate is the perfect accessory for those wanting to mount a red dot sight to their pistol for some extra accuracy whilst out on the battlefield. It is constructed from aluminium and comes with the necessary steel mounting screws to attach this plate to your pistol.

It is compatible with red dot sights that have an RMR footprint, such as the PCS Miniature Red Dot Reflex Sight. If you're looking for a replacement RMR plate, or you need one to mount your desired red dot, the Army Armament Staccato RMR Mounting Plate is perfect for you.

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer.

Attached to Picatinny system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories.

The rail is a 20mm Picatinny type, measuring roughly 2.25 inches and is attached to Picatinny system using the included screws and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

If you want to equip your Cybergun CANIK TP9 GBB with a red dot optic for faster target acquisition and a slick modern look, the Cybergun CANIK Optic Plate & Charging Handle Set; Docter/RMR Footprint is designed for just that! This set includes two optics plates, one with an RMR footprint and one with a Doctor footprint, giving you access to the two most common red dot sight footprints.

Also included is a charging handle which can be attached to either side of the optic plate via its threaded base, granting functionality for both left and right-handed shooters and lightening fast handling IPSC race gun style! This is ideal for those who run their pistol as a primary in CQB skirmishes but can be left off entirely if you want a more snag-free setup well suited to a combat sidearm. If you want to dress your CANIK up like all the Glock and Hi-capa users can, here is your opportunity!

If you want to equip your Cybergun CANIK TP9 GBB with a red dot optic for faster target acquisition and a slick modern look, the Cybergun CANIK Optic Plate & Charging Handle Set; Docter/RMR Footprint is designed for just that! This set includes two optics plates, one with an RMR footprint and one with a Doctor footprint, giving you access to the two most common red dot sight footprints.

Also included is a charging handle which can be attached to either side of the optic plate via its threaded base, granting functionality for both left and right-handed shooters and lightening fast handling IPSC race gun style! This is ideal for those who run their pistol as a primary in CQB skirmishes but can be left off entirely if you want a more snag-free setup well suited to a combat sidearm. If you want to dress your CANIK up like all the Glock and Hi-capa users can, here is your opportunity!

If you have invested in a Tokyo Marui VSR-10 Pro and you want to add an optic, this 20mm receiver rail will do the trick! The Slong Airsoft Receiver 20mm Rail Mount For VSR-10 Sniper Rifle is designed to replace the rear iron sight on the Tokyo Marui VSR-10 Pro sniper rifle but can also be used to replace a worn-out rail on VSR-10 clones or the TM VSR-10 G-Spec sniper rifle.

The rail is constructed from aluminium and finished with matt black anodising, keeping the surface coating thin to ensure the rail remains in spec and capable of mounting any optical sight which fits 20mm Picatinny rails.

A set of high profile mount rings for scopes up to 30mm wide, which attaches to a 20mm rail and provides a solid platform for you to use your optic.

The perfect mount for your torch, able to fit to any 20mm RIS/RAS rail and with 5 adjustable positions.

A pair of scope mounts designed to raise your optic for a more comfortable optic setup.

A pair of scope mounts designed to raise your optic for a more comfortable optic setup.

A pair of scope mounts designed to raise your optic for a more comfortable optic setup.

If you want to take pure advantage of the SSP5's incredible range and accuracy, an optics mount will get you there! The Novritsch 20mm Picatinny Top Rail for SSP5 GBB Pistol is compatible with all variants of the SSP5 GBB and is constructed from CNC machined aluminium for a perfect combination of low weight, high strength and flawlessly in-spec rail dimensions.

The Top Rail is available in two different lengths, a short version measuring approximately 6cm long and a longer version measuring approximately 10.1 cm. The rail is installed on the optics mount section of the fixed SSP5 outer barrel, meaning it says put while you tap tap tap that trigger for easier target acquisition and less chance your optic will take damage from recoil. If you are running your SSP5 as a primary, this mount is essential to make the most of its epic performance!

If you want to take pure advantage of the SSP5's incredible range and accuracy, an optics mount will get you there! The Novritsch 20mm Picatinny Top Rail for SSP5 GBB Pistol is compatible with all variants of the SSP5 GBB and is constructed from CNC machined aluminium for a perfect combination of low weight, high strength and flawlessly in-spec rail dimensions.

The Top Rail is available in two different lengths, a short version measuring approximately 6cm long and a longer version measuring approximately 10.1 cm. The rail is installed on the optics mount section of the fixed SSP5 outer barrel, meaning it says put while you tap tap tap that trigger for easier target acquisition and less chance your optic will take damage from recoil. If you are running your SSP5 as a primary, this mount is essential to make the most of its epic performance!

If you have QD sling sockets on your Airsoft rifle, it would be rude not to take full advantage and set your rifle up with a highly flexible sling setup which can be installed, altered and removed in mere seconds!

This QD sling swivel from M-ETAL fits any QD sling socket and provides a wide "loop" style mount, to which a sling of practically any style can be mounted. To install the swivel onto a QD socket, simply push it into the socket, and it will automatically lock in place.

To disconnect the swivel, all you need to do is press the button in the centre, which will release the retention and disconnect the swivel from the socket on the rifle. This QD swivel can be rotated to any angle, guaranteeing the utmost comfort no matter which sling style you choose!

A set of Two Scope Rings for 25mm Optics, which easily attach to 20mm RIS/RAS Rail Systems to install your Rifle Scope on an Airsoft Gun. These rings are Low Profile, meaning your Scope will be mounted snugly to your Rail System. Keeping your scope close to your rail is good for seeing exactly where your BBs go after firing them.

Being a two-piece design, and coming included with an Allen Key, they are very easy to install. The scope rings mount to standard 20mm Picatinny rail sections. To attach them to your rifle scope you must use an Allen key to take off the top sections of the rings, then place your scope in and reattach the top sections of the rings. 

If you want to rock a red dot on your SSP18, add the Novrtisch SSP18 Red Dot Plate V2! This CNC aluminium red dot plate replaces the rear sight and allows the Novritsch Red Dot Sight - Micro V2 to be mounted, providing faster target acquisition and improved low-light visibility. 

The Red Dot Plate V2 is available in several colour options, from tactical black to eye-catching metallic colours which will really make your SSP18 stand out. Whether you're planning on using your SSP18 as a primary or you want your sidearm to be at the cutting edge of modern handgun configurations, the Novritsch SSP18 Red Dot Plate V2 is ideal!

If you want to rock a red dot on your SSP18, add the Novrtisch SSP18 Red Dot Plate V2! This CNC aluminium red dot plate replaces the rear sight and allows the Novritsch Red Dot Sight - Micro V2 to be mounted, providing faster target acquisition and improved low-light visibility. 

The Red Dot Plate V2 is available in several colour options, from tactical black to eye-catching metallic colours which will really make your SSP18 stand out. Whether you're planning on using your SSP18 as a primary or you want your sidearm to be at the cutting edge of modern handgun configurations, the Novritsch SSP18 Red Dot Plate V2 is ideal!

If you want to rock a red dot on your SSP18, add the Novrtisch SSP18 Red Dot Plate V2! This CNC aluminium red dot plate replaces the rear sight and allows the Novritsch Red Dot Sight - Micro V2 to be mounted, providing faster target acquisition and improved low-light visibility. 

The Red Dot Plate V2 is available in several colour options, from tactical black to eye-catching metallic colours which will really make your SSP18 stand out. Whether you're planning on using your SSP18 as a primary or you want your sidearm to be at the cutting edge of modern handgun configurations, the Novritsch SSP18 Red Dot Plate V2 is ideal!

MGP brings us a high quality Quick Detach (QD) sling adaptor, allowing you to connect your weapon of choice to a sling. The QD system is locked in place by 4 steel ball bearings which are lowered with a push of the centre button to lock in place and release, again by pressing down the same button.

This version supports M-LOK and KeyMod systems. Simply loosely screw the fixtures together using the Allen key included, then slide them into your KeyMod or M-LOK rail, then tighten to lock the fixture in place and voila! Now you can attach and detach your sling swivel with ease, allowing for a dynamic and efficient playstyle on the battlefield.

No more unslinging your rifle from your back or shoulders!

If you're looking for a flashlight mount for your SMR-style handguard, the WADSN SMR Rail Offset Mount for M300/600 Scout Flashlights is ideal. This mount is constructed from CNC aluminium with steel mounting hardware and designed to mount SF Scout (M300 and M600) flashlights to Geissele Super Modular Rail (SMR) style attachment slots.

The mount offers several mounting positions for your Scout Light, allowing for 3 different heights so you can get your accessories perfectly positioned. The mount also allows for mounting with a slight forward extension to defeat "suppressor shadow" or mounting at the rear to keep the light away from your muzzle, depending on how you install your Scout Light. This mount is only for standard SF M300 and M600 Scout Lights and won't fit the Scout Light Pro series due to its differing mount.

If you're in search of flashlight mounting solutions for the rare but super-slick SMR handguard, the WADSN SMR Rail Offset Mount for M300/600 Scout Flashlights is what you need!

If you're a talented skirmisher with skills to showcase, the Novritsch GoPro Adapter for 20mm Picatinny Rails should suit you perfectly. This CNC aluminium mount attaches to any 20mm Picatinny rail and provides a mount for GoPro-style action cameras with the socket mount. Please note, the barrel-mounted rail shown in the images is for demonstration purposes only and is not included with the set. 

The mount can be fitted to position the camera on the left or right side of your primary and only minimally affects the weight distribution and balance thanks to its lightweight aluminium build. If you have epic Airsoft moments to record for the ages, the Novritsch GoPro Adapter for 20mm Picatinny Rails is what you need!

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount will sort that out! This mount is designed for a wide range of magnifiers and clones, including those from EOTech, Vortex, Holosun, Sig Sauer and Trijicon (for detailed compatibility see the "Full Description").

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers the FAST Riser, FAST MRO Mount and FAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you want the elite, modern look for your primary and plenty of perks to go with it, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount belongs on your gat!

A set of Alloy constructed Scope Rings for 30mm Optics, that has a 20mm Mount on each ring for easy installation to a 20mm RIS/RAS/Picatinny Rail System. They are Low Profile Rings, which will hold your Optic low against your rail rather than reaching for the sky.

A high strength sling plate constructed from a dense Alloy that allows you to attach a sling to your AK47 platform weapon.

If you need to attach a sling loop to your handguard, the M-ETAL Zco A-1 Picatinny Sling Mount is exactly what you need! This sling loop mounts to any 20mm Picatinny rail and allows you to set up a two-point sling using the sling loops on your stock or buffer plate.

Its CNC aluminium construction ensures it is strong enough for most Airsoft platforms, but it is designed for Airsoft only; do not use this sling point with real firearms.

If you need to attach a sling loop to your handguard, the M-ETAL Zco A-1 Picatinny Sling Mount is exactly what you need! This sling loop mounts to any 20mm Picatinny rail and allows you to set up a two-point sling using the sling loops on your stock or buffer plate.

Its CNC aluminium construction ensures it is strong enough for most Airsoft platforms, but it is designed for Airsoft only; do not use this sling point with real firearms.

If you're running an MRO replica and you're getting jealous of T1 users with their snazzy mounts, this should sort that out! The PTS Syndicate Unity Tactical FAST MRO Mount is constructed from CNC Machined aluminium with steel mounting apparatus and boasts licenced Unity Tactical trademarks, just like the real thing! 

The FAST MRO mount is compatible with any red dot sight which uses the MRO mounting standard (most likely only real steel MRO, MRO HD and some MRO clones) and includes a built-in backup rear sight designed to align with standard AR front sights and flip up sights, with windage adjustment available via the dial on the right side. 

Like the FAST Micro Mount designed for T1 footprint red dots, this mount puts your MRO red dot at 2.26" above the bore, giving you a more comfortable neck position when shooting, especially if you use full face protection or active hearing protection. If you want to give your MRO red dot a fresh mount with a modern look and give yourself a more comfortable shooting experience, the PTS Syndicate Unity Tactical FAST MRO Mount will do just that!

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount will sort that out! This mount is designed for old-school magnifiers which use a ring-style mount, offering compatibility with most 30mm tube magnifiers including the Vector Optics Flip To Side Magnifier.

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers the FAST Riser,FAST MRO Mount and FAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you're running face protection and don't want to ditch your magnifier, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount is what you need!

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount will sort that out! This mount is designed for old-school magnifiers which use a ring-style mount, offering compatibility with most 30mm tube magnifiers including the Vector Optics Flip To Side Magnifier.

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers the FAST Riser,FAST MRO Mount and FAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you're running face protection and don't want to ditch your magnifier, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount is what you need!

A set of two High Profile Scope Mount Rings, which will accept a 25mm Optic and easily install to 20mm RIS/RAS/Picatinny Rail Systems. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. Being a two-piece design, and coming included with an Allen Key, they are very easy to install.

If you're recreating the latest real-world German DMR rifle, the East Crane 20mm Picatinny Scope & Red Dot Mount for G-417 Replicas will put a smile on your face! Patterned after the mount setup provided with the real steel G28 DMR, this set includes a dual ring mount for either 25 or 30mm monotube scopes and a red dot sight mount with a built-in sunshade, designed for T1 footprint/mounting standard micro red dot sights. The set includes spacers to allow a 25mm monotube scope to be mounted, though by default the dual ring mount fits 30mm monotubes.

Both the scope and red dot mount are constructed from aluminium with steel bolts, nuts and screws, mounting to 20mm Picatinny rails. The dual scope ring includes a 20mm Picatinny rail on the top of each ring which is intended to allow the red dot sight mount to be fitted, though these are removable if you want to use the two mounts on separate platforms. On the right side of the mount, you'll find helpful engraved markings indicating the mounting direction, just like the real deal.

While it is designed to mimic the real G28 mount setup and is ideally paired with the East Crane EC-204 G-417 DMR, this mount setup will work on any platform with 20mm Picatinny rails and the included T1 mount has been sighted on MP5 and G36 platforms used by the German Armed Forces and Police. Whether you're replicating the real steel G28 or looking for a pair of unique mounts packaged together, the East Crane 20mm Picatinny Scope & Red Dot Mount for G-417 Replicas would be a slick setup for your primary!

For those who prefer a traditional horizontal grip but still want an index point to help steer the rifle when things get up close and hectic, the Armour Hand Stop Set has your name on it! This set is easily mounted to any M-LOK rail system using a combination of screws and a push fit panel and provides a hand stop and a QD sling socket with a rail panel to go between. 

For those who prefer a traditional horizontal grip but still want an index point to help steer the rifle when things get up close and hectic, the Armour Hand Stop Set has your name on it! This set is easily mounted to any M-LOK rail system using a combination of screws and a push fit panel and provides a hand stop and a QD sling socket with a rail panel to go between. 

Customise your MLOCK handguard with this easy to attach Harris lug for use with bipods and slings. Constructed from aluminium, the attachment is sturdy and well-weighted.

The perfect way to securely mount your scope onto your Airsoft gun, allowing you to get the best possible accuracy from your scope when aiming. 

A 20mm RIS compatible raised scope mount ring, designed to raise up optics to your eye-level, or fit larger scopes onto your Airsoft guns.

If you're building out your AK to match the latest real steel builds, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is essential. Based on real steel Zco-style red dot risers, this aluminium component fits replica Zco-style handguards such as the 5KU Lightweight Zco-style Lower Handguard. It will only attach to these styles of handguards due to the unique attachment interface.

Atop the riser is a section of 20mm Picatinny rail, perfect for mounting a red dot that matches the modern Russian design. If your modern Zco-style AK requires optic space for longer-range engagements, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is the piece of equipment for you.

If you're running a side rail-equipped AK and want to add an optic, this will do the trick! The M-ETAL QD 20mm Picatinny Mount for AK Side Rail is made from aluminium alloy, a skeletonised design intended to reduce weight while providing two 20mm Picatinny rails, a 13cm rail at 12 o'clock and a 9cm rail at 9 o'clock.

This mount is designed for AK-style side rails, affixing via its QD mount, which allows your optic to be mounted and removed in seconds. To attach this mount to an AK side rail, simply open the QD throw-lever, slide it on from the rear, then rotate the lever back into its locked position (facing the front). Please note, this mount won't fit SVD-style side rails and is strictly for the AK-style side rail found on most AKM and AK-74/AKS-74U builds. If you've got an AK with a side rail and it needs some glass, this mount is what you need!

If you're running the PTS FAST LPVO mount and want a quick way to engage close-range threats, the PTS Syndicate Unity Tactical Top Ring for FAST LPVO Mount w/MRDS Adjustable Plate lets you do just that. This set includes an upper scope ring for the PTS FAST LPVO mount, a screw set and the PTS MRDS modular mount plate.

Designed to fit practically any common MRDS footprint, the PTS Modular MRDS plate mounts to the top of the included ring, which itself can be used to replace either the front or rear ring on your PTS FAST LPVO mount. The MRDS mount is confirmed to fit Docter, RMR®, Shield RMS/ RMSc, Sig Romeo Pistol Red Dot Sight, C-more, Sightmark M-Spec, Holosun-K and DeltaPoint® Pro footprint red dot sights.

If you've ever missed a kill because you were busy adjusting magnification, the PTS Syndicate Unity Tactical Top Ring for FAST LPVO Mount w/MRDS Adjustable Plate with an MRDS installed will ensure that never happens again!

If you're running the PTS FAST LPVO mount and want a quick way to engage close-range threats, the PTS Syndicate Unity Tactical Top Ring for FAST LPVO Mount w/MRDS Adjustable Plate lets you do just that. This set includes an upper scope ring for the PTS FAST LPVO mount, a screw set and the PTS MRDS modular mount plate.

Designed to fit practically any common MRDS footprint, the PTS Modular MRDS plate mounts to the top of the included ring, which itself can be used to replace either the front or rear ring on your PTS FAST LPVO mount. The MRDS mount is confirmed to fit Docter, RMR®, Shield RMS/ RMSc, Sig Romeo Pistol Red Dot Sight, C-more, Sightmark M-Spec, Holosun-K and DeltaPoint® Pro footprint red dot sights.

If you've ever missed a kill because you were busy adjusting magnification, the PTS Syndicate Unity Tactical Top Ring for FAST LPVO Mount w/MRDS Adjustable Plate with an MRDS installed will ensure that never happens again!

If you're rocking the AAP-01 or AAP-01C and need a red dot sight to finish it off, the Action Army RMR Plate & Raised Sights Set for AAP-01 is the key. This set includes a raised front sight with a light-enhancing insert and a fixed rear sight with an integral RMR footprint mount plate, allowing you to mount a micro red dot sight for improved low-light accuracy and faster target acquisition!

Both the front sight and the rear sight/mount plate are constructed from steel, making them extremely robust and ideal for the aggressive skirmisher. This kit fits both the original AAP-01 Assassin and AAP-01C Shinobi but isn't compatible with the Action Army Folding Stock Kit. If you run your AAP-01 as a sidearm but need to get on target faster, pair the Action Army RMR Plate & Raised Sights Set for AAP-01 with an RMR footprint red dot sight and get busy!