Refine results
Refine by
Viewing 30 of 86.
  • Affordable Sight
  • Ideal For Beginners 
  • Practical Compact Sight

An ultra low-profile and compact red dot sight, featuring 1x magnification and an easy to acquire 20mm x 30mm lens.

  • Integrated Mount
  • Windage and Elevation Adjustment
  • 11 Brightness Levels

A 1x30 red dot sight that comes included with its' own pre-installed 20mm RIS mount, has 11 levels of brightness and is fully adjustable for windage and elevation.

  • Nitrogen filled tube
  • Integrated Rail mount
  • Includes 20mm Rail riser

Introducing the Vector Optics Victoptics CRL 1x22, an ultra-compact, lightweight Red dot sight with an included riser mount. This RDS is styled after the Aimpoint Micro series of red dot sights, and combines a super-tough design with a wide range of brightness adjustment, perfect for both bright outdoor conditions and clearing dark rooms the CQB site.

  • Low Profile Sight
  • 4x Sight Picture Mode
  • Adjustable Brightness

A lightweight and low profile holographic sight which can be adjusted, allowing for four different sight pictures, as well as red and green modes. The sight is constructed entirely from alloy, with a glass Lens and comes with a 20mm RIS / RAS mount.

  • Red / Green Dot Modes
  • Brightness Adjuster
  • Raised Sight Mount

An Airsoft Dot Sight created by THETA OPTICS, designed to be fit onto 20mm RIS / RAS Rails, and allows the user to acquire their targets quicker and more easily over traditional ironsights. This sight has the added boon of being raised, meaning that the sight is easier to use for Airsoft players who wear full face protection or lower mesh face masks, lifting the sight high enough to allow you to cheek weld even when wearing a mask.

The sight is fully adjustable, allowing windage and elevation to be set, as well as brightness and dot colour, with up to 5 brightness settings for both green and red dot modes.

This sight is perfect for any Airsoft skirmisher who is looking for a great quality red dot for their Airsoft replica without breaking the bank. The sight is great for outdoors thanks to its high brightness settings, and can be used in CQB easily by simply dropping the brightness levels to 1-2.

  • Cantilever Mount
  • Alloy Construction
  • Red/Green Target Dot

An Alloy constructed Red Dot Sight for Airsoft Guns that have a 20mm Rail. The included Cantilever Mount attaches straight to the rail, and also lifts the unit off your Rail System slightly, which makes it comfortable to aim down. With a choice of a Red/Green Target Dot and various brightness levels, this is a fantastic choice for a first Sight.

  • Micro Red Dot Sight
  • RIS / Weaver
  • Compact

A compact red dot sight by ASG designed to be mounted onto sidearms as an RMR or AR's as a canted option when using a short dot / LPVO.

  • Classic Reflex
  • 4x Sight Picture Mode
  • Adjustable Brightness

A lightweight and low profile Red Dot / Multi Reticle Sight which can be adjusted, allowing for four different sight pictures, as well as red and green modes. The sight is constructed entirely from alloy, with a glass Lens and comes with a 20mm RIS / RAS mount.

  • Wide field of view
  • 4 Reticle types
  • Aluminium construction

The Vector Victoptics RAG is a reflex type red dot sight with multiple brightness settings and reticles to chose from. The sight is primarily constructed from aluminium, and has a built-in QD Picatinny rail mount.

  • 3.5MOA Dot size
  • 6 Levels of brightness
  • Integrated 11mm Dovetail rail

A new Micro reflex sight from the Vector Optics' Victoptics range, the SP-X is a familiar looking sight but with a built in 11mm Dovetail rail mount for Air rifles and others.

  • Batteries Included
  • Red/Green Reticule
  • Rubber Push Buttons

This Red Dot Sight is an instantly recognisable shape that looks great on any Airsoft Gun, and will give you the ability to quickly and efficiently acquire a target and send some well-aimed shots.

  • Holographic Reflex Sight
  • Red / Green Modes
  • For 20mm Rails

An Airsoft Red Dot / Holographic sight created by THETA OPTICS which is designed to be fit onto 20mm RIS / RAS Rails to make aiming your Airsoft gun easier and quicker giving you an advantage in CQB engagements. The sight projects a sighting picture using a laser on to the front glass lens which once zeroed will be where the pistol will shoot no matter the angle at which you can see the picture, this allows you to acquire targets quicker and more efficiently giving you an edge in an Airsoft game.

This sight is perfect for any Airsoft Skirmisher who is looking for a cheap but extremely effective red dot sight which won't break the bank without a loss in quality of picture.

  • Red Dot Setting
  • 1x Magnification
  • Adjustable Reticule

A 1x red dot sight, providing a red dot for aiming. This sight provides a red dot sight with no magnification which provides quick target aquisition whilst in the field, allowing for two eye open targeting. 

  • 2 Bolt Design
  • On / Off Red Dot
  • Alloy Construction

A high quality very compact Airsoft Red Dot Sight that is suitable to fit any Airsoft 20mm RIS/RAS rail section. Ideal for pistols, compact SMG and low profile rail systems. 

This mini Airsoft Red Dot Sight also comes with a protective Polymer casing that is excellent when storing and transporting your AEG or Optic if you keep it separate from your Airsoft Gun. Windage and Elevation is also easily adjustable for sighting in your Airsoft gun any time of the day.

  • Red/Green Dot
  • Super Compact
  • RIS Weaver Base

A compact red/green sight that weighs in at an amazing 55g, making it perfect for speedsofters and snap shooters alike! 

  • Four Reticules
  • Red/Green Dot
  • Wide Field of View

A reflex style red dot sight with a choice of four reticules, red or green colour dot and a wide field of view through the lens.

  • Tool-less Fitting
  • Red and Green Illumination
  • Realistic Markings and Engravings

Compact red and green dot holographic clone airsoft sight, suitable for any AEG or GBB primary. Also has realistic markings, including laser warning. Illumination has up to 10 levels of micro-brightness adjustment in both red or green lighting mode.

  • Tool-less Fitting
  • Red / Green Dot
  • Adjustable Brightness

A low profile and compact Red Dot Sight designed to be attached to the top of Airsoft Rifles and Guns to allow quick target acquisition during games. 

  • Adjustable Illumination
  • Tool-less Assembly and Fitting
  • Realistic Markings and Trademarks

Get the operator look with this holographic clone sight, with adjustable red or green illumination. The alloy outer frame features realistic military trademark and a laser warning label.

  • Red/Green Dot
  • For 20mm Rails
  • Aluminium Made

This is an Aluminium-constructed Red Dot Sight for Airsoft Guns, that is attached to 20mm RIS/RAS via the Integrated Mount. If you want a more effective aim-point for your replica, that is ready to go out of the box, then the Theta Optics Red Dot Reflex Sight is a strong choice.

  • Protective hood
  • 4 Reticle types
  • Red/Green illumination

If you are looking for the functionality of a multi reticle reflex optic but with a bit more strength and resistance to drops, consider the Reflex Red/Green Dot sight from PCS. Complete with an aluminium armoured hood, this sight is very much suited to the rigors of heavy use at an Airsoft Skirmish.

  • Quick Release
  • High & Low Profile
  • 11 Brightness Levels

A tough Alloy constructed Red Dot Sight which is reminiscent of the T1 style design, and comes included with both a high and low profile 20mm mount to use it raised or snugly seated on your rail. It accepts a CR2032 battery and has 11 brightness levels, as well as tool-less Windage & Elevation adjustment.

  • Red or Green "Holo" type reticle
  • Alloy construction
  • Integrated 20mm Picatinny rail mount

An Alloy constructed Holographic Red Dot Sight designed for 20mm RIS/RAS, making it compatible with every Airsoft Gun with a 20mm/Picatinny rail. The sight provides a multi-function reticle with 10 levels of brightness adjustment and the choice of Red or Green illumination, allowing for both precise shooting and ultra-fast snap shooting.

  • Easy to Adjust
  • QD Mount Included
  • Red & Green Illumination

A functional Airsoft replica reflex optical sight of the XPS Holographic sight by EOTech. Like the real thing this replica has functional red / green illumination, and has fully adjustable windage and elevation settings.

  • 3 MOA Target Dot
  • 1 MOA Adjustment
  • Waterproof & Rugged

A T-1 style optic which is protected by tough Rubber Armour, has eleven levels of brightness on its' 3 MOA Target Dot and comes included with both a high and low profile 20mm mount. Enjoy real-steel quality at Airsoft prices.

  • 2 MOA Dot
  • Includes low and high mounts
  • For 20mm Picatinny rails

If you're looking for a compact red dot sight, but want something that looks a bit different to the norm, the Miniature Rifle reflex sight from Big Dragon could be what you need! The Miniature Rifle Reflex sports a crisp, fine 2 MOA dot with 6 levels of brightness adjustment for aiming, and comes with both a low and high mount for 20mm Picatinny rails. 

  • Bundeswehr "issue" style
  • For AR36 Airsoft AEG rifles
  • 3x Scope - Red dot sight - Carry handle combo

Looking for the best way to make your AR36 look like those issued to the German Army? Perhaps you want the sleek and classic style the AR36 platform was known for before it ended up covered with rails? The Specna Arms Aiming Module for AR36 replicas is designed to mimic the real AR36 aiming module, designed for a time before rails were a mass issued thing. This device combines a 3x telescopic sight, red dot sight and polymer carry handle into a single unit and mounts to the AR36 receiver dovetail. The sight requires 2x LR1 cells (included) for the red dot sight to function, but the 3x scope is unpowered.

  • Adjustable Brightness Settings
  • 20mm RIS Rail Mount
  • Lightweight Sight

An Airsoft Red Dot sight created by Nuprol as part of their growing line of Optics and Scopes. This alloy sight can be fitted to any 20mm RIS rail with ease to make aiming your rifle or pistol more simplistic.

  • Alloy construction
  • Integrated Red aiming laser
  • Includes Cantilever 20mm Picatinny mount

If you are looking for a robust tube-style red dot sight that can do double duty as an aiming laser, you have found one of the few! The HD1 from Nuprol combines traditional design principles with modern functionality, providing both red and green dot reticles with gradual brightness control.

  • Raised Red Dot
  • Red & Green Dot
  • Included Low + High Mount

A Tactical High Profile T1 Style red dot sight with an included low profile mount and red + green dot options.

Acquire your target and take them out with accuracy!

We stock a huge range of optics from budget to high-end telescopic optics and red dot sights. All of them fit onto 99% of Airsoft guns on the market. Choose from a wide array of holographic, reflex, iron sights from well known brands like Vector Optics and Vortex Optics.

Be ready for your next airsoft skirmish, if you shoot in low light Airsoft arenas or have an upcoming night game, then be prepared with one of our Airsoft optics today.

We also hold a range of scopes offering varying magnifications, from close range sights, to medium range scopes and more. We also hold a range of sniper scopes that are perfect for your long range shots. They offer illumination, easy to adjust windage and elevation as well as a mix of eye relieves and front lenses from 25 to 50mm wide.

Shop all of our sights and scopes online today or browse other accessories like Airsoft lasers or angled foregrips.