Viewing 12 of 12.
grid
list
16.99
  • Stabilise Shots
  • Improves Air Seal
  • Reduce Power Loss

An upgrade hop bucking for Tokyo Marui and other compatible products. Designed for the Tokyo Marui VSR-10 bolt action and blow back pistols in mind including the Hi-Capa 4.3, Hi-Capa 5.1, M1911A1, SIG P226, SOCOM MK23 and G26. 

95.49
  • Extremely Stable
  • CNC Hop-Up Unit
  • Precision Adjustment

A highquality replacement Hop-Up unit designed and created by Action Army to fit TM Spec VSR / BAR-10 Airsoft Bolt Action Sniper Rifles, to enhance and perfect the performance of the weapon.

17.99
  • TDC HOP-up mod set
  • Requires extensive modification
  • For VSR-10 & VSR-10 clone sniper rifles

If you want to push your VSR-10-based sniper rifle to the absolute pinnacle of accuracy, a TDC mod should do the trick! The Hades Airsoft TDC HOP-up Unit Set for VSR-10 Sniper Rifle is designed to replace the original HOP-up arm and adjuster, providing direct pressure to the top of the HOP-up nub and bucking to eliminate side-to-side shot deviation.

Installing this TDC unit will require some extensive, irreversible modifications to your base sniper rifle, so we only recommend this set for those who are confident with power tools and have a decent level of Airsoft technical knowledge.

The unit requires you to drill a hole through the top of your outer barrel using either a 5mm or 5.5mm drill bit and the included drill guide, inserting the guide into the stripped outer barrel to ensure the hole is drilled in the right place. Hades also recommends that when the modification is complete, that you glue the TDC unit to your outer barrel using super glue or another strong adhesive.

If you are the type of sniper that likes to get their hands dirty with modifications and you want your VSR to outrange and outshoot the rest, this kit will do it!

11.99
Was 14.49
Save 2.50
  • Maximum Range HOP-up rubber
  • 50-Degree hardness - Ideal for 280-360 FPS
  • Compatible with TM based GBB & VSR platforms

The Maple Leaf MR HOP-up Bucking is widely regarded as the best HOP-up bucking offered by Maple Leaf, offering a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect and an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design intended to prioritise range over grouping size and the ideal pairing for the Maple Leaf I-Key. This bucking is compatible with Tokyo Marui-based GBB and VSR platforms, WE and VFC GBBRs and as always, we only recommend upgrade parts for those who are confident working on their platform's internals. If you want to extend your range out to the borderline implausible, the Maple Leaf MR.HOP HOP-up Bucking will do the trick!

14.49
Was 17.99
Save 3.50
  • Shorter Than Standard
  • For VSR-10 & M28 rifles
  • 2 Hop Rubbers Per Pack

Next level of Airsoft sniper rifle hop-up rubber produced with similar materials and processes to Madbull's current line up of AEG hop-up components. 

10.49
  • 50 Degrees
  • Extra Large Patch
  • For VSR-10 / Unbridged

A 50 degree hop rubber for VSRs and unbridged barrels, designed to maximise range at a slight cost to accuracy. 

33.49
  • CNC Machined
  • Consistent Pressure
  • Anodised Aluminium

A CNC machined Aluminium Hop Arm / Pressure Plate for the Modify MOD24 Bolt Action Sniper Rifle.

10.49
  • 50 Degrees
  • Silicon Construction
  • For VSR-10 / KJW / WE 

A high quality replacement Hop up rubber, made to 50 degrees of hardness, and designed for VSRs, as well as KJW and WE Airsoft designs.

13.49
  • For 0.40g +
  • Extra Large Patch
  • For VSR-10 / Unbridged

A 70 degree hop rubber for VSRs and unbridged barrels, designed to maximise range at a slight cost to accuracy. 

53.99
  • CNC Aluminium construction
  • Gen.2 - Wider HOP-up arm
  • Compatible with spring-powered Dragunov SVD

If you're running a spring-powered Dragunov SVD and want more accuracy, the AP Precision HOP-Up Chamber for SVD Spring Sniper Rifle is what you need. This CNC aluminium HOP-up unit is the gen.2 iteration of Airsoft Pro's SVD HOP-up chamber, offering a wider HOP-up arm to provide more side-to-side stability and a stronger HOP-up effect. The set includes the chamber, the HOP-up arm and a 3mm rubber roller which can be cut to size and used as a nub. 

The AP HOP-up chamber is compatible with the original SVD nub, bucking and inner barrel but can also make use of upgraded inner barrels, buckings and nubs designed for AEGs. This gives you access to one of the widest aftermarkets for upgraded parts with near-unlimited options, meaning you can set your SVD up to suit your needs perfectly. Compatibility-wise, this HOP-up chamber is only for spring-powered or CO2-powered SVDs from A&K, Koer, ACM or King Arms and won't fit AEG SVDs of any type. 

9.99
  • Push Fit Design
  • Polymer Construction
  • Standard Components

Replacement standard loading ramp and clip for Tokyo Marui AWS and Well MB44 Airsoft, spring powered sniper rifles.

10.49
  • Rubber construction
  • Optimised for tighter groupings
  • For VSR/GBB barrel with unbridged window

Maple Leaf has quickly risen to become the market leader in HOP-up rubbers and inner barrels, and the Maple Leaf Wonder Bucking is the latest of their mould-breaking designs. The Wonder HOP-up bucking is designed with tighter groupings in mind, with a wide "r-hop" style contact patch and stabilising wings on either side. The Wonder sacrifices all-out range over the excellent Maple Leaf "Super" series of HOP-up rubber for greater precision and tighter shot-to-shot groupings, making it perfect for a setup with an emphasis on accuracy.