- Replacement hammer set
- Stainless steel finish
- For AAP-01 Assassin GBB
If you are working on your dream AAP-01 build you will want it to be performing to its maximum until the end of time. An upgraded hammer is a great way to improve your AAP-01's longevity and its resistance to wear. The CowCow SS Hammer Set is constructed from CNC machined alloy with a stainless steel finish and is highly polished for smooth operation with minimal friction.
- Polymer construction
- Complete nozzle set
- For Action Army AAP-01 Assassin GBB Pistol
If you want your AAP-01 GBB to be running at its absolute best an enhanced nozzle would be a great choice to get the most out of this impressive platform. The CowCow Enhanced Plastic Nozzle Set includes an enhanced nozzle, nozzle valve, valve lock pin, valve spring and enhanced piston head, and when installed these parts should improve the shot to shot consistency, provide smoother cycling performance and improve the rate of fire of the AAP-01 Airsoft GBB.
- Shield-shaped contact patch
- Designed for maximum accuracy
- For GBB & VSR-10 Unbridged barrels
If you want to tighten your groupings and get maximum accuracy from your GBB or VSR setup, the Maple Leaf 2023 Decepticon HOP-up Bucking for VSR/GBB is the HOP-up rubber you need! Also known as the "Desepticons" bucking by Maple Leaf, this is the 2023 version with a refined shape and packaged with an air-seal promoting C-ring which also enhances feeding reliability. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.
The Decepticon makes use of a flat shield-shaped contact patch and is ideally paired with a Maple Leaf I-Key but also works with standard HOP-up arms/tensioners. When compared to its sister bucking, the Autobot, the Decepticon is made for maximum accuracy with a slight range sacrifice while the Autobot is focussed purely on long range. If you're all about accuracy, the Maple Leaf 2023 Decepticon HOP-up Bucking for VSR/GBB belongs in your build!
- Shield-shaped contact patch
- Designed for maximum accuracy
- For GBB & VSR-10 Unbridged barrels
If you want to tighten your groupings and get maximum accuracy from your GBB or VSR setup, the Maple Leaf 2023 Decepticon HOP-up Bucking for VSR/GBB is the HOP-up rubber you need! Also known as the "Desepticons" bucking by Maple Leaf, this is the 2023 version with a refined shape and packaged with an air-seal promoting C-ring which also enhances feeding reliability. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.
The Decepticon makes use of a flat shield-shaped contact patch and is ideally paired with a Maple Leaf I-Key but also works with standard HOP-up arms/tensioners. When compared to its sister bucking, the Autobot, the Decepticon is made for maximum accuracy with a slight range sacrifice while the Autobot is focussed purely on long range. If you're all about accuracy, the Maple Leaf 2023 Decepticon HOP-up Bucking for VSR/GBB belongs in your build!
- Shield-shaped contact patch
- Designed for maximum accuracy
- For GBB & VSR-10 Unbridged barrels
If you want to tighten your groupings and get maximum accuracy from your GBB or VSR setup, the Maple Leaf 2023 Decepticon HOP-up Bucking for VSR/GBB is the HOP-up rubber you need! Also known as the "Desepticons" bucking by Maple Leaf, this is the 2023 version with a refined shape and packaged with an air-seal promoting C-ring which also enhances feeding reliability. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.
The Decepticon makes use of a flat shield-shaped contact patch and is ideally paired with a Maple Leaf I-Key but also works with standard HOP-up arms/tensioners. When compared to its sister bucking, the Autobot, the Decepticon is made for maximum accuracy with a slight range sacrifice while the Autobot is focussed purely on long range. If you're all about accuracy, the Maple Leaf 2023 Decepticon HOP-up Bucking for VSR/GBB belongs in your build!
- Spring steel construction
- Enhanced recoil spring
- For Action Army AAP-01 GBB pistol
If you are after an improvement in recoil force and cyclic rate from your Airsoft AAP-01 GBB pistol, an uprated recoil spring is a great way to get there! The 150% Recoil Spring from CowCow provides an increase in strength over the original recoil spring installed into the AAP-01 and should improve the rate of fire and provide a snappier bolt speed with a slight increase in recoil.
- Reinforced fire pin lock
- Stainless steel construction
- For TM/WE EU series, AAP-01 and Umarex/VFC Glock
If you are looking for reliable long term performance from your EU series GBB pistol, AAP-01 Assassin or Umarex/VFC pattern Glock GBB pistol, CowCow are here to provide! This replacement fire pin lock is constructed from stainless steel using precise CNC machining and is polished using MAF polishing technology for smoother function with less friction. The stainless steel construction of this part prevents warping under heavy use, and guarantees reliable long term performance, assuming the rest of your pistol is working fine!
- CNC 6061 Aluminium construction
- Heat gradation finish
- Short stroke your AAP-01 for more speed
Is your AAP-01 not fast enough? The CowCow Aluminium Buffer for AAP-01 is designed to satisfy even the most ravenous appetite for speed! This set includes two recoil rod spacers which are CNC machined from 6061 aluminium to provide a great balance between strength, precision and low weight. Adding one or two of the spacers to your guide rod will reduce the length of travel of the AAP-01 bolt and speed up the already impressive cyclic rate of the AAP-01 in both semi-auto and fully automatic fire.
- PTS MEC Enhanced internal series
- 2x Enhanced HOP rubbers/buckings
- Two contact surfaces for improved consistency
The MEC HOP rubber/bucking is precision moulded and has a slightly narrower inner diameter at the entrance and extra coverage for the top of the barrel cut area for a vastly improved air seal. This HOP rubber provides two points of contact with the bb with equal pressure on either side, improving effective range and consistency.
- Shield-shaped contact patch
- Designed for maximum range
- For GBB & VSR-10 Unbridged barrels
If your priority is extending range and you run a GBB pistol or VSR-10 platform sniper rifle, the Maple Leaf 2023 Autobot HOP-up Bucking is calling your name! Also known as the "Aotubot" by Maple Leaf, this bucking is designed for pure range, with a shield-shaped contact patch for maximum contact area with your BBs and an impressive HOP-up effect. Being the 2023 model, this set also includes an air-seal promoting C-ring which also helps improve feeding. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.
Naturally, the Autobot is designed for use with heavy BBs (0.28g+) and is ideally paired with a Maple Leaf I-Key but works fine with standard HOP-up arm/tensioner setups. When compared to its sister bucking, the Decepticon, the Autobot is made for pure range and the Decepticon is for tighter groupings at shorter ranges. If you need maximum range, you need the Maple Leaf 2023 Autobot HOP-up Bucking for VSR/GBB!
- Shield-shaped contact patch
- Designed for maximum range
- For GBB & VSR-10 Unbridged barrels
If your priority is extending range and you run a GBB pistol or VSR-10 platform sniper rifle, the Maple Leaf 2023 Autobot HOP-up Bucking is calling your name! Also known as the "Aotubot" by Maple Leaf, this bucking is designed for pure range, with a shield-shaped contact patch for maximum contact area with your BBs and an impressive HOP-up effect. Being the 2023 model, this set also includes an air-seal promoting C-ring which also helps improve feeding. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.
Naturally, the Autobot is designed for use with heavy BBs (0.28g+) and is ideally paired with a Maple Leaf I-Key but works fine with standard HOP-up arm/tensioner setups. When compared to its sister bucking, the Decepticon, the Autobot is made for pure range and the Decepticon is for tighter groupings at shorter ranges. If you need maximum range, you need the Maple Leaf 2023 Autobot HOP-up Bucking for VSR/GBB!
- Shield-shaped contact patch
- Designed for maximum range
- For GBB & VSR-10 Unbridged barrels
If your priority is extending range and you run a GBB pistol or VSR-10 platform sniper rifle, the Maple Leaf 2023 Autobot HOP-up Bucking is calling your name! Also known as the "Aotubot" by Maple Leaf, this bucking is designed for pure range, with a shield-shaped contact patch for maximum contact area with your BBs and an impressive HOP-up effect. Being the 2023 model, this set also includes an air-seal promoting C-ring which also helps improve feeding. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.
Naturally, the Autobot is designed for use with heavy BBs (0.28g+) and is ideally paired with a Maple Leaf I-Key but works fine with standard HOP-up arm/tensioner setups. When compared to its sister bucking, the Decepticon, the Autobot is made for pure range and the Decepticon is for tighter groupings at shorter ranges. If you need maximum range, you need the Maple Leaf 2023 Autobot HOP-up Bucking for VSR/GBB!
- Shield-shaped contact patch
- Designed for maximum range
- For GBB & VSR-10 Unbridged barrels
If your priority is extending range and you run a GBB pistol or VSR-10 platform sniper rifle, the Maple Leaf 2023 Autobot HOP-up Bucking is calling your name! Also known as the "Aotubot" by Maple Leaf, this bucking is designed for pure range, with a shield-shaped contact patch for maximum contact area with your BBs and an impressive HOP-up effect. Being the 2023 model, this set also includes an air-seal promoting C-ring which also helps improve feeding. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.
Naturally, the Autobot is designed for use with heavy BBs (0.28g+) and is ideally paired with a Maple Leaf I-Key but works fine with standard HOP-up arm/tensioner setups. When compared to its sister bucking, the Decepticon, the Autobot is made for pure range and the Decepticon is for tighter groupings at shorter ranges. If you need maximum range, you need the Maple Leaf 2023 Autobot HOP-up Bucking for VSR/GBB!
- Skeletonised hammer with hexagonal design
- Compatible with Tokyo Marui Hi-capa and clones
- Available in silver, black, or heat gradation finish
If you are planning a Hi-capa overhaul the Custom Hammer from Laylax Nine Ball is a great choice to not only improve the feel of your trigger but add some style points too. This hammer is a skeletonised design with weight-reducing ports machined into the hammer in a hexagonal shape, giving the hammer an ultra-modern look. The hammer is constructed from aluminium, keeping the weight low for maximum performance whilst boasting added strength when compared to most alloy hammers provided out of the box.
- Recoil buffer kit
- Various spacers included
- Speed up your Hi-capa or 1911!
The Competition Recoil Buffer Module from CowCow is designed to shorten the travel of the slide of your pistol, increasing its cyclic rate. The set includes 8 recoil buffer pads of varying hardness which can be stacked in various combinations to fine tune your pistol for optimum speed.
- Replacement hammer
- Alloy construction
- Stainless Steel finish
An upgraded hammer is a great foundation to any upgraded AAP-01 build, especially if you are an HPA user! The CowCow SS Hammer is CNC machined from strengthened alloy with a stainless steel finish, and MAF polishing technology is applied to its exterior surfaces to reduce friction between parts and ensure smooth operation of the pistol.
- Full O-ring set
- Replacement for original parts
- Repair or refresh your Gas shotty!
If you have a leaky M887x series shotgun this is what you will need to fix it. Replacement complete O-ring set, useful to repair your old unloved Shotgun or refresh your well loved Shotgun.
- Shield-shaped contact patch
- Flat/R HOP style Rubber
- For GBB & VSR-10 Unbridged barrels
If you're seeking maximum HOP-up performance and are committed to using heavy BBs, the Maple Leaf 2023 MR HOP Bucking for VSR/GBB belongs in your build. The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.
MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, this version of the MR HOP is designed for unbridged VSR-10 and GBB pistol inner barrels but as always, a certain amount of expertise and tuning may be required to install it, though it will be far less work than the R-HOPs of old!
- Shield-shaped contact patch
- Flat/R HOP style Rubber
- For GBB & VSR-10 Unbridged barrels
If you're seeking maximum HOP-up performance and are committed to using heavy BBs, the Maple Leaf 2023 MR HOP Bucking for VSR/GBB belongs in your build. The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.
MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, this version of the MR HOP is designed for unbridged VSR-10 and GBB pistol inner barrels but as always, a certain amount of expertise and tuning may be required to install it, though it will be far less work than the R-HOPs of old!
- Shield-shaped contact patch
- Flat/R HOP style Rubber
- For GBB & VSR-10 Unbridged barrels
If you're seeking maximum HOP-up performance and are committed to using heavy BBs, the Maple Leaf 2023 MR HOP Bucking for VSR/GBB belongs in your build. The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.
MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, this version of the MR HOP is designed for unbridged VSR-10 and GBB pistol inner barrels but as always, a certain amount of expertise and tuning may be required to install it, though it will be far less work than the R-HOPs of old!
- Shield-shaped contact patch
- Flat/R HOP style Rubber
- For GBB & VSR-10 Unbridged barrels
If you're seeking maximum HOP-up performance and are committed to using heavy BBs, the Maple Leaf 2023 MR HOP Bucking for VSR/GBB belongs in your build. The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.
MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, this version of the MR HOP is designed for unbridged VSR-10 and GBB pistol inner barrels but as always, a certain amount of expertise and tuning may be required to install it, though it will be far less work than the R-HOPs of old!
- Stainless steel construction
- Titanium coated
- For Tokyo Marui Hi-capa and 1911 GBB pistols
If you are building out your dream Airsoft Hi-capa GBB pistol, the CowCow Stainless Steel hammer strut would be a great addition if you require an improved trigger feel and better mechanical engagement. This part is constructed from stainless steel with a titanium coating to prevent corrosion and warping. When installed into your TM based Hi-capa or 1911 GBB this part should help improve shot to shot consistency and provide longevity far beyond the original parts.
- Stainless steel construction
- Titanium coated
- For Tokyo Marui Hi-capa and 1911 GBB pistols
If you are building out your dream Airsoft Hi-capa GBB pistol, the CowCow Stainless Steel hammer strut would be a great addition if you require an improved trigger feel and better mechanical engagement. This part is constructed from stainless steel with a titanium coating to prevent corrosion and warping. When installed into your TM based Hi-capa or 1911 GBB this part should help improve shot to shot consistency and provide longevity far beyond the original parts.
- For AAP-01
- 140% and 200% strengths
- Improves recoil and slide speed
Are you looking for more recoil from your AAP-01? Installing a stronger CowCow Hammer Spring will do the trick! These springs come in a set and replace the original part in your AAP-01 pistol. The stronger the spring, the more force is applied for each hammer strike, which releases more gas and provides higher FPS and improved recoil and slide speed! This part is constructed from high-strength spring steel and is hard-coated to prevent corrosion.
The set comes with two springs, the shinier one is 140% strength and the duller one is 200%.
- Spring steel construction
- Replacement original part
- For KJ Works B9/B92 GBB Pistols
If your KJ Works B9/92 has trigger issues, this might be the key to getting it running again. The KJ Works Trigger Spring for B9/92 GBB Pistol is a replacement original part for the KJ Works B9 and B92 GBB pistol series and is constructed from spring steel. This is the spring that resets the trigger, so if your trigger gets stuck back after one shot this might solve your issue!
- Steel construction
- Trigger actuator
- For GBB pistols
An upgrade or replacement stock sear spring for gas blowback pistols. The spring is made of robust steel and therefore will hold its shape better than stock springs, which is perfect for keeping your trigger action to be short and crisp. Due to the springs high tolerance, there would be no need to shave it down to fit in your grip.
- Polymer construction
- For SSP1/SSP5 GBB Pistol
- Keep one in the toolbox just in case!
If you love your Novritsch pistols and want to keep them shooting pristine, keeping a spare Novritsch SSP1/SSP5 Nozzle can't hurt! This polymer loading nozzle is compatible with Novritsch SSP1/SSP5 GBB pistols and is a fantastic part to have lying around just in case a catastrophe strikes, especially if you often find yourself relying on your sidearm. If you're very attached to your Novritsch SSP1/SSP5 pistols and don't ever want them to sit around awaiting spare parts, grab this to put your mind at ease and get your Novritsch pistols back on the battlefield!
- Replacement magazine fill valve
- For GBB magazines
- Includes an O-ring
If you have a magazine which leaks from the fill valve, or your mag is a bit old and the valve has taken a hammering over the years, a replacement valve is the way to go. This Specna Arms valve replaces the fill valve in your magazine with a nice fresh one, complete with an O-ring to ensure there are no leaks! This valve will require a valve key to install.
- Replacement part
- Brass with rubber O-rings and a steel knocker
- Fix up your old MK.23 magazines!
A replacement or spare Outlet / Knocker Valve for the Tokyo Marui MK23 SOCOM NBB Pistol. If you own plenty of Magazines and want to keep them in tip-top condition, then you're going to want a few Knocker Valves spare in your arsenal. They are incredibly easy to install, provided you have an appropriate Valve Key on standby. You can use other tools to install them, but this is not recommended as you could damage the Valve.
- Aluminium construction
- Replacement original parts set
- For Army Armament Hi-Capa GBB series
If you have hammer issues with your Army Armament Hi-Capa, this should help! The Hammer and Strut for Hi-Capa GBB Pistols from Army Armament is constructed from Aluminium and an original replacement part for the Army Armament Hi-Capa GBB series, including the R501, R504, R603, R608, R609 and potentially others. The set includes both the hammer and hammer strut and should be compatible with most TM clone Hi-Capa pistols, though it may need mods for anything other than Army Armament 'Capas.
Do you own a Gas Blowback which is in need of spare parts or repairs? Maybe you want to stock up on those vital parts that you could need the day before an Airsoft Skirmish. From Feed Lips to HOP Rubbers, O-Rings, Hammers, Complete Spares Kits and many more, we've got it all here at Patrol Base.