Cylinder Group

Looking to give your M24 platform Sniper rifle a bit more range? The CYMA Upgrade set for CM.702/M24 will give you what you seek, with the added benefit of including reinforced parts! The set includes the piston, piston head and spring guide, all of which are machined from aluminium and finished in metallic blue, and a seriously high power spring which gives out approximately 575 FPS when installed!

This set is compatible with most M24 sniper rifles based on the Classic Army design but is designed for the CM.702 series, and may need modification and tuning for other M24 platforms.

A replacement Bolt Assembly for the DBoys Shell Ejecting KAR98K Spring Powered Sniper Rifle, which is the easiest and most efficient way to repair a Rifle with a damaged action.

Fine-tune your SSG10 with this Weight-Adjustable Piston from Novritsch, designed to enhance the performance of your SSG10 sniper rifle. Crafted with high-quality materials, this piston is the ultimate upgrade for tuning your SSG10 to make it shoot exceptionally with your different BB weights, barrel lengths, and the other interchangeable elements of your rifle.

Looking to give your CM.706 Sniper rifle a bit more range? The CYMA Upgrade set for CM.706 will give you what you seek, with the added benefit of including reinforced parts! The set includes the piston, piston head and spring guide, all of which are machined from aluminium and finished in metallic blue, and a seriously high power spring which gives out approximately 575 FPS when installed!

If you're looking to give your CM.700/700A/708 sniper rifle a bit more range the CYMA spring upgrade set will be what you're after, with the added benefit of including reinforced parts! The set includes the piston, piston head and spring guide, all of which are machined from aluminium and finished in metallic blue, and a seriously high power spring which gives out approximately 575 FPS when installed!

A spare or replacement Outer Shell for the Bolt Assembly of the Double Bell / D-Boys Kar98K Airsoft Shell-Ejecting Spring Sniper Rifle. If you own one of these Rifles then it is important to have spares of the part that handles most of the stress. Don't get caught out with a broken Rifle, have you spares drawer stocked up today!

The Stainless Steel Cylinder for CM.706 series comes as a set with a pre-installed brass cylinder head and is a replacement original part manufactured by CYMA themselves. This can be a handy part to have if you use your CM.706 at different sites with different FPS limits, as you can make a second cylinder and swap them out as and when you need (though this does require disassembly). The set includes both the cylinder and the cylinder head.

For the smoothest and strongest bolt pull for your Tokyo Marui, CYMA or JG VSR-10 Pro and G-Spec sniper rifles.

If you are looking to extend the range of your L96 bolt action sniper rifle this is what you will need! A complete package including an aluminium spring guide, piston, piston head and spring for any APS2 L96 compatible Sniper rifle.

The Air Brake Pin blocks the cylinder head before impact producing an air "cushion" for the piston. As a result, the impact is dampened and the gun is more quiet. Included are 4 different lengths: 20 mm, 23 mm, 26 mm and 29 mm. The longer the length, the more of an air cushion resulting in a quieter shot, but it also reduces the FPS due to more of the air in the piston being used to dampen the impact. AirBrake pins are installed onto the piston head to make shooting the SSG-10 rifles quieter. They are compatible with upgrade parts such as theNovritsch SSG10 Weight Adjustable Piston.

This is an advanced technical part, it is only recommended if you are confident in your upgrading abilities.

If your loading plate locker is damaged, you're in luck! The Airsoft Pro Loading Plate Locker works with the Well MB and TM AWP Sniper Rifles. A loading plate locker is a retaining ring that holds the loading plate whilst it is mounted on the cylinder head. It is made from high-density polymer, making it a great replacement/spare part.

Only try and fit this Loading Plate Locker if you're confident in your abilities and you know what you're doing, it could be difficult!

Do you want to push your Novritsch SSG10 to the next level? The Novritsch SSG10 Cylinder Head Gen2 will help you achieve this dream. This machined stainless steel cylinder head has been optimised to make it more consistent and powerful. The thread has an optimal length to maximise the cylinder volume and the shape of the cylinder head has been slightly tweaked for a better air seal.

If you're planning to upgrade your CYMA CM.700 or CM.708 sniper rifle, install this first! The CYMA Stainless Steel Cylinder for CM.700/708 Sniper Rifle is pre-assembled with a brass cylinder head, rubber O-ring and stainless steel cylinder with a welded bolt handle mount for maximum strength. The inner surface has been polished to reduce friction, improve efficiency and prevent excessive wear and tear when using strong springs.

Compatibility-wise, this part set is only for the CYMA CM.700 and CM.708 series of spring-powered sniper rifles and is unlikely to work with other brands and models. As always, we only recommend upgrade parts like this for those with experience or the patience and willingness to learn. If you plan to install a super strong spring into your CM.700 or CM.708, this set should give it the strength it needs to last a lifetime!

The Novritsch SSG10 Drill Fluted Cylinder is a fantastic upgrade for your SSG10 sniper rifle. This gives your Novritsch sniper a wonderfully unique look, and additionally, it also reduces the contact surface when pulling the bolt, which results in a smoother and easier pull. It's the perfect balance of aesthetic and functionality improvement!

You will need to disassemble your SSG10 rifle and then reassemble it to install this part. This sounds tricky and intricate, but luckily for us, Novritsch has kindly provided a video showing you how to disassemble your SSG10, install the Drill Fluted Cylinder, and then reassemble the SSG10.Installation video attached. We only recommend upgrade parts like this for those with experience or the patience and willingness to learn.

If you're planning on doing up your WELL MB02/03 VSR-10 clone, this set will sort your piston group! The WELL Piston Upgrade Set for MB02/03 Sniper Rifle Series includes a CNC aluminium piston and piston head, CNC aluminium ball bearing spring guide and a 500FPS mainspring. Installing this set should get you right to the upper limits of permitted sniper rifle velocity, extending range considerably compared to the stock MB02/03 spring. If you're working on a bargain sniper rifle build with a WELL VSR-10 clone base gun, this set would be perfect!