All External Airsoft Parts & Attachments

A 14mm CCW threaded muzzle device, designed to replace your Airsoft guns original flash hider with a sound amplifying compensator. This flash hider is an great to match an aggressive playstyle to a combat CQB primary.

If you want a way to lengthen your primary without adding excess weight, the Laylax 9 Inch Carbon Fibre Barrel Extension is what you need. This barrel extension is constructed from carbon fibre instead of the usual alloy or steel, giving it a miraculously low weight of only 41 grams and the eye-catching looks of carbon fibre texture.

Barrel extensions are a great way to change your build without needing to change the outer barrel itself, offering a simple installation provided your original barrel has 14mm CCW male threads at the tip. If you're building a DMR from an SBR and already have a longer inner barrel, the Laylax 9 Inch Carbon Fibre Barrel Extension will keep it covered with speedy-looking carbon fibre and give you threads for a tracer, suppressor or flash hider at the tip!

If you want to save some weight on your AR36 or Novritsch SSR63 and give it a whole new look, you have found what you need! The Novritsch Minimal 20mm Picatinny Rail Kit for SSR63/AR36 AEG is constructed from alloy with steel mounting bolts and is compatible with the full range of Novritsch SSR63 AEGs as well as most AR36 AEG and GBBR platforms. The part is manufactured by Double Bell, includes built-in flip-up iron sights and is based on the real steel KAC design. 

The set provides a 20mm Picatinny top rail measuring approximately 10cm in length, enough for most red dot sights and smaller magnified scopes while minimising excess material to keep the weight low. The built-in flip-up iron sights are fully adjustable, with a single rear aperture which can be raised and lowered by turning the drum just below the aperture and adjusted left and right via the drum on the right side. If your AR36 needs a style up or you want to lean in to the light and tight design philosophy of the Novritsch SSR63, this kit is the perfect upgrade!

If you want a new look for your CYMA AK or you're building the big boy RPK series, Battleaxe has the kit for you! The RPK Wood Conversion Kit for AK-47/74 is designed to fit most AK47 and 74 variants, it does NOT fit AKS-74U. The set includes a real wood upper handguard and lower handguard with a foregrip beautifully finished to mimic the real thing. The Romanian style features a vertical foregrip on the lower handguard, ever so slightly more ergonomic than the classic Russian platform.

The attention to detail paid by Battleaxe in this kit is evident when you notice the super-realistic laminated plywood construction, just like real Russian AK wood. While this wood may not be as strong as the real Russian stuff, it's ample for Airsoft use and looks far better than cheaper alternatives. Whether your objective is to build a seriously unique AK or complete your RPK support gun build, this Wood Conversion Kit is a fantastic option!

If you're looking for an SSP18 slide that features a stylish metallic finish, but still remains lightweight thanks to its aluminium construction, Novritsch has you covered. The Novritsch SSP18 CNC Slide is a superb way to make your Novritsch SSP18 stand out on the battlefield and turn heads with a flashy design!

The CNC top and side cuts help reduce weight, resulting in faster cycling speed, and give your pistol an ultra-modern look. Customisation is the name of the game with this slide, which allows you to craft an SSP18 unique to you, so your opponents will always remember who sent them back to the safe zone.

Modern Airsofters are always looking for a lightweight slide to improve on those all-important cycling speeds, but if you aren't willing to compromise your style with a polymer slide, an aluminium slide is what you want! The SSP18 features an incredibly low weight thanks to its CNC cuts and grooves, which also make your pistol stand out from the rest. The slide transforms your SSP18 from a simple and functional pistol to a custom and unique extension of yourself with forward-thinking and futuristic stylings.

If you're looking for a uniquely menacing suppressor with an ultra-modern real steel lineage, the Airsoft Artisan SRD762 Dummy Suppressor belongs on your gat! Well suited to Sig MCX and Rattler builds but compatible with any Airsoft platform with a 14mm CCW male threaded barrel, the SRD762 makes a fantastic finishing touch to any modern build, particularly a .300 Blackout!

Externally, the SRD762 takes a walk on the wild side, equipped with a menacing spiked front end designed for breaching doors in real steel form. The exterior profile is ribbed to match the real thing, intended to help dissipate built-up heat but serving in Airsoft terms to keep the SRD762 looking faithful to its real steel counterpart. 

Inside the SRD762 you'll find a spacer designed to accommodate a 34mm diameter tracer module and in the box, you'll get an aluminium tube in case you want to run an extended inner barrel through it or prevent your BBs from hitting the inside. If a modern suppressor is on your shopping list, the Airsoft Artisan SRD762 Dummy Suppressor is as well-made and good-looking as they come! 

If you're rocking the remarkable Novritsch SSE18 AEP and want to stretch its legs, the SSE18 Minimalist Carbine Kit is a great way to do it. Constructed with a CNC aluminium chassis and a high-density polymer stock, this carbine kit transforms the SSE18 into a nifty little SMG and allows you to take full advantage of its impressive range. 

Like the Minimalist Carbine Kit for SSP18 GBB, this carbine kit is equipped with a 20mm Picatinny rail up top, ready for a red dot sight or scope, and a magnetic locking folding stock at the rear. Also present is a lug for the Novritsch Univeral Holster system machined into the left side. Given the low weight of the completed setup, we think the SSE18 in the Minimalist Carbine kit is a superb sidearm for a sniper; small enough that it won't slow you down if carried on a belt with full auto on tap to keep the enemy at pay if you get spotted!

If you want to optimise your MCX for CQB, the Airsoft Artisan Spear LT SBR Handguard & Barrel Set for SigAir MCX Virtus will get you there. This set includes a 7-inch outer barrel and a detailed replica of the real steel Spear LT SBR handguard, both CNC machined from aluminium with the precision we expect from Airsoft Artisan. 

The Spear LT SBR handguard features M-LOK slots at the 3, 6 and 9 o'clock positions with additional slots at the lower offset angles and a single extra slot on each side, just ahead of the gas block cutout. This matches the handguard of the latest MCX SBR variant, keeping your MCX at the cutting edge of modern platforms. If your MCX needs to lose a few inches and gain a few M-LOK slots, the Airsoft Artisan Spear LT SBR Handguard & Barrel Set for SigAir MCX Virtus will sort it out!

If you're looking for a super-slick suppressor to finish off your cutting-edge build, the Airsoft Artisan HELIOS QD Suppressor w/Flash Hider is calling your name! This suppressor is flawlessly machined using CNC technology, making use of high quality aluminium and steel throughout the build. As we might expect from Airsoft Artisan, this suppressor is an absolutely gorgeous sight to behold, with some of the most precise machining we've seen on an Airsoft suppressor. 

The set includes two mounting options; a QD suppressor collar with a tri-prong flash hider and a direct thread collar, allowing you to switch between QD and direct thread depending on the mission's requirements. Included in the set is a tracer module spacer for 34mm diameter tracer modules (not included) and an aluminium tube designed to support an extended inner barrel or prevent BBs from impacting the inside of the HELIOS. 

Finished in eyecatching Titanium Grey with an aesthetic unlike any other suppressor, the Airsoft Artisan HELIOS QD Suppressor w/Flash Hider is the perfect finishing touch for a modern "gucci" build!

If your M4/AR-15 AEG needs a high-end makeover, the EMG Daniel Defense DD4™ RIII™ Metal Receiver for M4/AR-15 AEG is what it needs! Styled to match the receiver of the latest real steel Daniel Defence DD4™ RIII™ rifles, this receiver is made from flawlessly machined aluminium with an anodised surface finish to guarantee it maintains its good looks in the long term!

The set includes the upper receiver, lower receiver, front and rear body pins, an ambidextrous Grip-N-Rip® charging handle with mock bolt and a Daniel Defense marked polymer dust cover, completing the elite DD look. The upper receiver features DD4™ RIII™ markings prominently engraved and the right side of the magazine well includes realistic Daniel Defense roll marks, just like the real thing. As we might expect, the upper receiver also includes a 20mm Picatinny rail, ready for your choice of optical sight. 

This receiver is designed to fit M4/AR-15 AEGs and should fit most standard non-ambidextrous version 2 gearbox internals, making it the ideal way to style up your boring M4! The rear includes the standard AEG buffer tube mounting lug and the front features standard receiver threading; compatible with a wide range of barrel nuts and handguards so you can get the look you need. Whether you've got a polymer M4 that needs a realism boost or you want a bit of that in-vogue DD flair for your platform without buying a new gun, the EMG Daniel Defense DD4™ RIII™ Metal Receiver for M4/AR-15 AEG is a slick piece of kit!

If you have dreams of running your Maxim 9 GBB pistol with an integral tracer unit, your dreams can now become reality! The KRYTAC SilencerCo Maxim 9 GBB Tracer Unit/Extension Kit is designed to fit the KRYTAC Maxim 9 GBB pistol and extends the front end by approximately 3.1cm (not including the front piece) to accommodate the included Acetech muzzle flash tracer unit, though you can still mount the tracer without the extension kit.

The set includes an extension piece and wide front aperture constructed from aluminium, a pair of extended steel guide rods and the tracer unit itself. This is the perfect accessory to take full advantage of the KRYTAC Maxim 9's fantastic performance in a CQB environment!

Adding rails to your AK can be a chore, but users of the superb GHK AK GBBR platform now have one more option! Introducing the 20mm Picatinny Railed Gas Tube for GHK AK GBBR, an aluminium replacement gas tube with a 20mm Picatinny rail built into its upper surface. This rail is great for a forward-mounted optic but has plenty of space for mounting a tactical flashlight and also a PEQ laser if you have your primary sight mounted on a rail further back. If you are looking for a simple way to give your GHK AK GBBR a hint of modernity, this is the perfect piece!

If you have seen Saving Private Ryan and now you want a scoped Springfield rifle, this should get you there! The S&T 20mm Rifle Scope Mount for M1903A3 Springfield is constructed from aluminium and accepts common 20mm Picatinny scope rings, allowing you to fit whatever scope you desire to your Springfield provided the rings can be spaced to fit the mount. The spacing between the two rail sections is 7.5cm approximately, meaning most telescopic sights with separate rings will fit right on with the rings in the right position. 

The mount replaces your rear iron sight and sits over the receiver when installed and requires additional screws (not included) to attach it to the rifle. Please note, this mount will not work with optics which have built-in 20mm rail mounts and is intended for use with optics which use separate scope rings. 

If you're stuggling to get a good view through your red dot sight when wearing face protection, the WADSN High 20mm Picatinny Mount for T1/T2 Red Dot & PEQ Box will solve that issue! This raised optic mount is patterned after real steel "Hydra" mounts, offering a raised mount for T1/T2 style red dot sights and a 20mm Picatinny rail for a PEQ/DBAL laser unit or scope camera. This mount is designed for 20mm Picatinny rails and includes a pair of "recoil lugs" on the bottom which hold it in place firmly on your rail. 

The High 20mm Picatinny Mount for T1/T2 Red Dot & PEQ Box should fit most T1 and T2 clones provided they correctly replicate the real Aimpoint Micro mounting standard and is also compatible with the Novritsch Red Dot Sight V3, Vector Optics Maverick, Vortex Sparc Solar and Holosun 403B. Being slightly higher than a standard T1 mount, the High 20mm Picatinny Mount for T1/T2 Red Dot & PEQ Box is ideal for those who have a hard time getting a clear sight picture using full face protection, being designed in the real world for use with respirators and night vision devices. 

If your primary weapon boasts a 1913/20mm Picatinny stock setup, you absolutely need this stock to mount on it! The PTS Syndicate 1913/20mm Picatinny Folding Skeleton Stock is designed to mount to any 20mm Picatinny rail, however, that's not an invitation to mount it to your handguard!

The stock is constructed from high-density polymer with skeletonised cutouts for even more weight reduction. This stock is absolutely perfect for a compact rifle or SMG build, and with the included ASG Scorpion EVO adapter, you can mount it on that iconic replica easily. If you seek an ultra-compact and minimalistic solution to your stock problem, the PTS Syndicate 1913/20mm Picatinny Folding Skeleton Stock is perfect for you!

If you are rocking a primary with a 1913/20mm Picatinny stock interface, this should be of interest! The SigAir 1913/20mm Picatinny Telescoping Folding Stock is compatible with the SigAir MPX, MCX and any other Airsoft gun with a 1913/20mm Picatinny stock mounting interface. 

Amongst its many tricks, the 1913/20mm Picatinny Telescoping Folding Stock can fold to the side, be adjusted into any of 6 lengths of pull settings and includes a steel QD sling socket on either side. With official licencing from SigAir and full Sig Sauer trademarks, this stock is the perfect addition to a cutting-edge realism-focussed build!

If your MCX is a bit of a pig and you want more agility, the Airsoft Artisan 10" Carbon Fibre Handguard for MCX Virtus AEG will do the trick. This handguard is constructed from authentic Carbon Fibre and as such, it tips the scales at only 123g! Though this handguard will help your MCX lose weight, it does so without compromising on attachment interfaces, offering M-LOK slots at 3, 6, 9 and 12 o'clock and additional slots at the lower offset angles.

Another advantage of the Carbon Fibre handguard is its width of approximately 48mm, allowing you to run an integrally suppressed setup and still make use of your M-LOK slots provided your suppressor is slim enough. The set also includes a short section of aluminium 20mm Picatinny rail for M-LOK pre-installed on the rearmost upper M-LOK slot, designed to seamlessly interface with your receiver rail. If you're seeking a speedy look for your MCX without compromising accessory options, the Airsoft Artisan 10" Carbon Fibre Handguard for MCX Virtus AEG is what you need!

An incredibly robust mounting system for any 30mm tubed optic. This setup secures onto your 20mm Picatinny rail system with 4 securing bolts to provide a rock solid mount with recoil resistance. 

If you're equipped with the KRYTAC KRISS® Vector AEG, this is the ideal tracer unit! The Acetech THOR Tracer Unit; Bifrost Module is designed specifically for KRYTAC's KRISS Vector AEG, mounting to the flash hider included with the Vector via a QD interface. The THOR is constructed with an aluminium alloy housing and is inspired by the real steel "Osprey" suppressor, a design which suits the aggressive, modern look of the Vector perfectly.

Inside the THOR, we're equipped with the Bifrost-M tracer module, offering incredible functionality with a wide range of customisable modes, allowing you to select your muzzle flash colour or run all at once in "rainbow mode". The Bifrost-M illuminates both red and green tracer BBs and can still be used with standard BBs, with the muzzle flash function illuminating them for the first meter or so of travel.

If you're leaning into the Vector's CQB advantages and need a tracer unit to top off your build, you can't ask for anything more suitable than the Acetech THOR! With an aesthetic which suits the Vector better than any conventional cylindrical unit and incredible Bifrost functionality inside, your Vector AEG build is not complete without the THOR on board!

If you're planning on rocking your Glock as a primary, the Acetech Genesis Tracer Unit is the ONLY accessory you'll need! This beastly unit combines tracer functionality, muzzle flash, a super-bright tactical flashlight and a red aiming laser all in one. With vibes of the menacing Maxim 9 but filled with technology, the Genesis is available in two different length variants for either the Glock 19 or Glock 17/18 platforms.

With all the exciting tracer functions of the legendary Bifrost, along with Bluetooth connectivity allowing you to measure FPS and rate of fire of your pistol using Acetech's AceSoft App, the sheer amount of functionality built into this sleek device is without equal. Choose from 7 muzzle flash colour options, rainbow mode, dynamic rainbow mode and more, and that's before we discuss what the integral red aiming laser and tactical flashlight can do!

The laser can be zeroed, and the flashlight offers momentary on, constant on and stroboscopic mode, all of which are controlled using an ambidextrous rocker switch - a familiar switch setup to those who run an X300 or TLR-style pistol flashlight. If you run a Glock GBB pistol as your CQB primary, the Acetech Genesis Tracer Unit is how you make the most of it!

If you're looking for an ergonomic enhancement for your M4, the CYMA Enhanced Pistol Grip for M4/AR-15 AEG is a great affordable option! Made from robust high density polymer, this pistol grip is set at a more vertical angle than the average, making it fantastic for shooting with modern stances with the stock fully collapsed.

Each side is rocking dot texture, with additional linear texture on the front and rear, maximising gripping qualities for easy wet weather use. Compatibility-wise, this grip should fit almost every M4/AR-15 AEG on the market, provided it is based on the original TM M4 AEG internal and external design.

If you plan to mount a two-point sling, one of these might be useful! The Vector Optics Offset Sling Mount for 20mm Picatinny Rail is constructed from aluminium alloy and is rated to handle the recoil of real firearms so you can be confident it will never fail when used for Airsoft. The mount fits any 20mm Picatinny rail and is ideal for mounting to a handguard and pairing with a rear sling point so you can mount a two-point sling setup.

The sling loop hole measures approximately 7mm in diameter, meaning it should fit most sling hooks but if you find the fit is a bit too light we suggest using a keyring or paracord loop to provide a bit more flexibility and a wider variety of sling compatibility.

The Novritsch SSG10 Full Top Rail Gen.2 allows you to extend your top rail so you can mount any optic you desire atop your Novritsch SSG10. It is a 20mm Picatinny rail so will comfortably harbour most of the common scopes and sights found on the market. The rail screws into the top of your SSG10 receiver with the 4 screws provided, this keeps it securely attached to your sniper rifle, even with the chunkiest of scopes attached!

Make your SSG10 uniquely yours with the Novritsch SSG10 Full Top Rail Gen.2 and mount the perfect scope onto this rail to accommodate your sniping needs.

The ARCTURUS Russian Pistol Grip For AEG AK12/AKM/AK74 is constructed from high-density polymer and fits most ARCTURUS AKs, but also VFC platforms and VFC clones such as CYMA and Double Bell. It is designed to replicate real-world pistol grips and enhances the usual AK lack of ergonomics. It features finger ridges for perfect handling in any condition and exceptional comfort, both for gloved and ungloved users.

If you want to drag your AK platform into the 21st century and improve the ergonomics drastically, the ARCTURUS Russian Pistol Grip For AEG AK12/AKM/AK74 is exactly what you need! It also includes the necessary screw for attaching it to your Russian replica rifle.

A combination scope and side rail 20mm RIS rail mount designed to fit on both Airsoft Electric and Gas type AK Platform weapons which feature a side mount plate. 

If you're moving away from standard scope rings in favour of something more modern and lightweight, the Novritsch One-Piece 20mm Picatinny Scope Mount; 25mm Tube is ideal. This single-piece scope mount follows modern trends, combining the front and rear scope ring for a more robust combination setup which is easier to mount as a bonus. 

Its aluminium construction keeps the weight of the One-Piece 20mm Picatinny Scope Mount to a minuscule 138 grams and its raised optical centreline means your scope sits slightly higher than usual, ideal for those who like to keep their knashers protected behind a face mask while skirmishing. Each ring also includes a single slot of 20mm Picatinny rail, ideal for micro red dot sights, Runcam/action cameras or whatever other equipment you need to complete the mission at hand!

Compatibility-wise, this mount should fit any LPVO or Rifle Scope with a 25mm monotube but will not fit 30mm monotube optics. If you want a more advanced scope mounting solution for your primary or have trouble looking through your scope due to your face-pro choice, the Novritsch One-Piece 20mm Picatinny Scope Mount; 25mm Tube is what you need!

A replacement mock Compensator / Flash Hider for Airsoft 6mm BB Guns, fully licensed by PTS Syndicate, and is a replica based on the Griffin Armament design. 

Is your AK12 rail scuffed or bent? Need a replacement? No worries. Constructed from lightweight alloy, the cover is easily fit by swapping it out with the original dust cover. With a rail measuring around 7 inches, this cover gives your AK some quality customisation options to which you can attach the sight or scope of your choosing.

Specifically for AK12 models.

Looking for fast access to the selector switch on your AAP-01? So are we! Thankfully, TTi, being the innovators they are have invented the perfect solution! The Competition Charging Handle with selector switch combines an extended charging handle with an extended rotary selector switch which allows you to change fire modes in a flash without needing to lock the bolt open and break fingernails. This is the aftermarket part the AAP always needed!

Maybe you have accidentally broken your AUG vertical grip, or you bought the railed version and you want to embrace tradition? Luck would have it Army Armament now offer their AUG folding vertical grip as a spare part! The grip is constructed from high strength ABS polymer with an alloy core and includes its spring and mounting pin. This part is compatible with the Army Armament AUG but may also fit AEG AUGs from other manufacturers.