Airsoft Magazines

If you're looking for high quality mid-caps with a more realistic look than EPM mags, the EMG 210rnd Troy BattleMag Magazines for M4/AR-15 AEGs; 2 Pack should suit you perfectly! Like EPM mags, these have a whopping capacity of 210 BBs, many more than other standard-length mid-caps but unlike EPMs, these mags are patterned after the real steel Troy BattleMag magazine and officially licenced by Troy through EMG. Perfect for the realism fans!

Just like the real BattleMag, the flanks of the mag body boast snake scale style texture for enhanced traction and a rubber magazine pull assist on the bottom for improved control during fast reloads. The pull assist is also useful for pulling the mags out of tight pouches, giving you a bit extra to hold into to speed up your reloads. 

Loading the BattleMag is the same process as other Airsoft mid-caps; through the fill/feed port on the top of the magazine body using an Airsoft speed loader or loading tool. The massive capacity may make this mag difficult to load using ODIN or similar loaders when the mags are new, so we recommend bedding the magazine in before using a crank wound loader by filling it up with a thumb plunger loader and emptying it a few times. If you want your magazines to be as realistic as your primary, the EMG Troy BattleMag 2 pack is what you need!

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss! This magazine is an autowinding design with a sound control mode, which requires 3x AAA batteries to operate. 

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs. 

We know some of you like to do things old school, so for all you Beretta fans M38 looking for some more ammunition this mag from Snow Wolf is what you're after.

With a 50 round capacity, the mag is a mid cap design, so there's no rattle and no winding to keep things a little more realistic. The mag has sturdy polymer internals and an alloy shell for a good feel and weight in the hand.

So for all you Italian fanboys that like to skirmish with a piece of history, keep yourself in the field longer with this mag.

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK74 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong reinforced polymer shell with ribs across all its surfaces, to add strength to the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch for fast and easy reloads. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its shallow curve is a tell-tale sign that this is a 5.45 style AK magazine, for those who like to keep it real!

Looking to feed your AR-15/M4? Here is what you need. An essential for any modern styled AR-15. Made from strong high density polymer this mag should survive a drop or two, though we don't recommend it! This even includes a clip on dust cover, similar to the real world Plastic-mag, helping keep your magazine dust free and in good working order even when stored for some time!

A spare or replacement 50rnd short magazine for the Krytac Kriss Vector, which is made to a high standard with excellent quality Polymers, and features the KRISS trademark as well as faux round count.

An Airsoft SR25 6mm BB gun style magazine designed and built by G&G for use with their range of Airsoft Electric Gun SR25 replicas. It holds 50 rounds and is of steel construction.

If you need spare magazines for your Specna Arms or EMG Salient Arms BLU and you want to keep your pistol pure with the exact mags for the platform these are what you need! These magazines are manufactured by Armourer Works and licenced by Salient Arms through EMG and come with a Salient Arms extended baseplate to complete the SAI look. This is effectively an EU series magazine, but the included baseplate features the S in a cube logo and SAI in recessed detail on the bottom to complete the Salient Arms look.

The magazine can be filled through the fill valve on the baseplate with the magazine held inverted, and BBs can be loaded in through the feed lips at the top, or by pulling the follower down and loading through the widened section of the channel on the front, depending on your preference. Obviously, standard EU series magazines from WE and Armourer Works will fit and feed in the Specna and EMG BLU GBB pistols, but what is the point of going for a stylish Salient Arms pistol without the proper magazines?

Ever heard of the MG36? Potentially not, as this support weapon version of the AR36 never made it past the prototype stage, though the elite German KSK has been sighted running a similar setup in the early 2000s in Afghanistan. The NUPROL 1200rnd Electric drum magazine allows you to add some serious MG36 like firepower to your AR36 platform AEG, and transform it to provide supporting fire for the team. This drum magazine is constructed from high-density polymer with a modern design aesthetic, fitting in perfectly with the all polymer, highly modern AR36 platform. This magazine is an autowinding design with sound control, which requires 3x AAA batteries to operate. 

If you are looking for a second box magazine for longer operations or just because you have trigger-happy tendencies, Battleaxe is here to sort you out! The Battleaxe 2000rnd Box Magazine for T8 MK46 LMG - Sound Control is designed ONLY for the A&K FN MK46 MOD 0 T8 LMG AEG. The fill window of this beast of a magazine can be found at the top on a hinge making it easy to pour entire bottles of BBs in!

The magazine itself is constructed from polymer with a fabric cover, the feed tubes coil up from the box and are made from steel, guaranteeing strength. This magazine boasts both sound control and auto winding mode, meaning you have the choice between winding up the magazine with a flip of a switch or letting it do the winding automatically when it detects your AEG firing. Perfect for those who want to spend more time shooting and less time winding!

Unzip the fabric cover and you will find at the bottom of the magazine there is a switch with three settings and the battery compartment. The central position is the "off" position, pushing the switch into its named position activates either the sound control or "auto-winding" mode respectively. The battery compartment lid comes off and reveals space for a 9V battery, this is crucial for the magazine to function

A magazine for the VFC McMillian M40A3 6mm BB Spring Action Sniper Rifle and holds up to 20 BBs at a time.

NUPROL bring us another variant in the ever popular AK magazine range. With lightweight polymer construction, this mag is that of a mid-cap magazine, meaning that the magazine is filled at the top using a speedloader. Being a mid-cap means that there is no 'battle rattle' meaning that no BBs can be heard rattle around in the mag during skirmishes unlike high-cap magazines.

Holding 70 rounds, this mag has a somewhat unique design as it has a smooth and glossy black aesthetic, that would complement more modern AK loadouts perfectly. The low price point only makes these mags that bit more appealing!

Looking for AK74 magazines for a modern loadout? The 200rnd Mid-cap from NUPROL is constructed from polymer with a steel feed spring and baseplate and is patterned after more modern polymer magazines issued with AK74 and AK105 rifles in Russian service and civilian use. This is a spring loaded mid-cap magazine and can be loaded through the fill/feed port at the top of the magazine body, using either a speed loader or a loading rod/tool.

The advantage of mid-cap magazines is that they have no "battle rattle" so your mag won't gve away your position as you traverse the battlefield. This magazine is a 5.45x39 style magazine and is most appropriate for an AK74, AK105 or RPK74 AEG but will fit and feed in most AK platform AEGs.

If you're a fan of modern shooting techniques and rock around with an M4, AR-15 or SCAR-L, this magazine is just for you! The PTS Syndicate EPM 150rnd Mid-Cap Magazine w/ MultiTasker® Mag Pod Base Plate is perfect for realism seekers as the base plate included is designed for real steel magazines but they are also compatible with Airsoft magazines.

The BB guide of the magazine is coloured bright orange, allowing you to see the number of BBs remaining, from the top, side and lower part of the magazine. You can pick up the mag and know exactly how many BBs are remaining. It is constructed from tough DuPont Zytel Polymer, making it extremely durable and robust with a great finish.

The advantage of the MultiTasker® Mag Pod Base Plate is the ability to use your magazine as a makeshift bipod, providing improved stability so you can nail those long-range shots. Adding a bipod adds a lot of weight to the front end but the Mag Pod Base Plate should give you some of the functionality but none of the weight. If you're running a light and handy assault rifle seeking more stability without extra weight.

If you need short mags for your S&T Sterling or E-11 Blaster custom build, you just found them! The S&T 50rnd Short Mid-Cap Mag for Sterling AEG is constructed with a steel shell, polymer internals and a steel feed spring and is compatible with all S&T Sterling AEG variants, including the E-11 Blaster custom. 

As with other Airsoft mid-caps, this mag can be loaded through the fill/feed port on the top of the mag body using a speed loader or loading rod. If you run an S&T Sterling and want more compact mags, here you go!

A spare magazine for VZ.58 AEGs, externally, this magazine is a close replica of the real steel 30-round 7.62x39mm magazine for the real steel VZ.58. While externally the VZ.58 may closely resemble the AK-47, the real steel variant shares no parts with Kalashnikov Rifles, including the magazines. This magazine has a steel shell housing and polymer internals, it is strong and has extremely reliable feeding. Much like its real steel counterpart, this magazine features the classic ribbed texture adding to the realistic aesthetic and making it easier to handle and manipulate.

As this is a medium capacity (mid-cap) design, it is filled using a speed loader directly into the feed lips, meaning it has great capacity and without any rattle during movement. The ammunition is loaded directly into the Airsoft gun from the magazine's feeding tube using its steel spring, so there is no winding mechanism present on the magazine.

This is the perfect spare magazine for Airsoft VZ.58 replicas if you need more ammo to get the operation done.

If you want to keep your B9 pistol running when the cold sets in a CO2 mag is the only way to do it. The WE 25rnd CO2 Magazine For B9/92 is constructed from alloy with polymer feed lips, a brass knocker valve and rubber gas route bucking. This CO2 mag is designed for the WE B9 and B92 pistols and will not work in other versions. The magazine can be loaded through the feed lips at the top of the design and due to the lack of an external follower, a speedloader with a GBB adapter is recommended for ease of loading. 

The CO2 compartment is inside the shell and accessible with the baseplate removed. To achieve this, simply pull upwards on the polymer tab at the bottom of the follower channel and slide the baseplate forward. With this done, you will see the CO2 plug inside; unscrew this and you can pop in a 12g CO2 capsule (we recommend adding a bit of silicone lube to the top of the capsule), tighten it back down again, slide your baseplate back into position and you're good to go! 

A Steel high capacity clockwork magazine for AR-15 / M4 models of Airsoft Electric Gun, that will fit and feed in 95% of M4 based Airsoft guns.

If you're rocking the stunning EMG Noveske "Space Invader" AEG, here's what you need to keep it well-fed! The EMG 210rnd Hi-Cap Magazine for Noveske "Space Invader" AEG is constructed with a steel shell and polymer internals, holding 210 BBs approximately. 

The mag can be filled through the fill window on top by opening the hatch and pouring your BBs in. With this done, wind the winding wheel on the baseplate 5-10 times or until the noise changes and you're ready to rock! Compatibility-wise, this mag is specifically for the EMG Noveske "Space Invader" AEG (OEM: APS) and is unlikely to work with other platforms. If your Space Invader is hungry for more firepower, grab a couple of these to keep it happy!

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK47 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong polymer shell with reinforcing ribs across all its surfaces, to strengthen the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its steep curve is a tell-tale sign that this is a 7.62 style AK magazine, for those who like to keep it real!

This is a 15rnd Short Magazine for the Tokyo Marui TMPSG-1 Sniper Rifle (electric). It is a compact magazine which makes prone shots much easier, and reduces the chance of magazines snagging on your equipment. It is loaded from the top using a Speedloader and is very easy to carry thanks to its' highly compact design.

A 600rnd High Capacity Magazine for the BOLT BR-47 series, that is filled by pouring BBs through the top Fill Window, and wound via the Clockwork Winding Wheel on the base. The Magazine closely matches a popular model for modern AK enthusiasts. If you want to stay in the game for longer, then stock up on Spare Magazines today.

If you have yourself one of the cutest backup pistols around, the Cyber Gun Colt Junior, you may want a spare mag to give you an even better chance in those last-ditch scenarios! The 7 rnd Colt Junior GBB Magazine from Cyber Gun is similarly laid out to a standard GBB magazine but miniaturised. The magazine can be loaded through the feed lips at the front, and the gas fill valve can be found on the magazine base plate. The left side of the magazine features a pull-down follower, making it easy to load BBs even without a speed loader.

A 430 round capacity magazine for AK platform, this G&G mag features a clear design and polymer build. BB's are loaded via the fill window at the top of the mag, then turning the clockwork winding wheel on the base of the mag feeds the BB 's through the mechanism.

A spare or replacement magazine for the Cyber Gun PGM .338 Bolt action Snipers rifle. This magazine has an authentic steel shell, and a mix of polymer and alloy internal parts. The magazine holds 19 rounds and has a large gas reservoir, enabling it to be filled multiple times with BBs before the propellant runs out.

This spare magazine for the G&G Armament Piranha gas blowback Airsoft pistol is constructed with a transparent polymer shell with mock 9x19mm cartridges visible within, and is a great way to make your pistol stand out on the field. It is filled with BBs using a speedloader, preferably with a GBB adapter, and can be filled with gas using the fill valve on the baseplate. If you own a G&G Piranha Pistol, then Spare Magazines are an absolute must for staying in the field longer and avoiding the long walk back to the safe zone to reload!

If you're running the ICS TOD aka IDF Defender, load up on these magazines! The 400rnd Steel High-Cap Mag for ICS TOD/IDF Defender AEG offers realistic stamped steel construction for a realistically hefty feel, the perfect pairing for the highly realistic ICS IDF Defender. 

Like other wheel-wound Airsoft high-cap magazines, this mag is filled through the fill window on the top of the mag body by opening the hatch and pouring BBs straight in. With this done, close the hatch, wind the winding wheel on the baseplate 5-10 times or until the magazine is properly tensioned (listen out for the clicking noise made by the winding wheel changing) and you are ready to rock. If feeding ceases, wind the wheel again to get it feeding once again. If you're rocking the ICS IDF Defender, these are the mags you need!

If you're looking for SAIGA-12 mags for your Double Bell SAIGA-12 AEG or want to give your AK a different look, the Double Bell 300rd Hi-Cap Magazine for SAIGA-12K AEG is what you need. This polymer high-capacity magazine holds approximately 300 BBs and is filled through the fill window at the top of the magazine body. Simply pop the fill window door open, pour your BBs in, wind the winding wheel on the baseplate 5-10 times or until the noise changes and you're good to go!

If you need some additional magazines for your Ares Otto Repa SOC SLR Sniper Rifle, look no further! The Ares 40rnd Low-Cap Magazine for SOC Sniper Rifle AEG is designed specifically for this platform, it is constructed from high-density polymer and holds 40 BBs. This might seem like a low capacity but the SOC AEG is a sniper/DMR-type platform and 40rnds will be all you need to get the job done.

The magazine inserts via the "rock and lock" method, requiring that you index the front of the magazine into the well first and rotate the rear up to lock. It features ridged grooves on the sides to aid in gripping, with or without gloves. The magazine is loaded at the top of the mag using a speed loader, its low-cap design means there is no battle rattle when hiding in the bushes!

A High Capacity Magazine designed and built for the ASG CZ 805 Bren A1 Series of Airsoft 6mm AEG Rifles. The magazine is constructed from Polymer, with a Polymer Shell and Internals.