All Two-Tone Airsoft Guns

If you love the military look and like to dabble in GBBRs, the EMG CGS Daniel Defense DDMK18 GBBR should suit you perfectly. This full metal GBBR is licenced by Daniel Defense through EMG, boasting immaculate engraved trademarks across the design, and is based on the much-lauded Tokyo Marui ZET System internally, which is excellent news! 

The ZET system is widely regarded as the best GBBR internal system around, and CGS (CYMA Gas System) has made it even better, throwing in a generous complement of steel parts including the bolt carrier, trigger group and bolt catch. This means a longer lifespan than rival GBBRs and heavier recoil thanks to the added mass from the steel bolt carrier. Also inside is a 6.04mm tightbore inner barrel, a nice deal sweetener that improves gas efficiency and accuracy. If you've been weighing up getting into the GBBR game but the cost of fully upgrading a ZET System puts you off, this one has all the steel parts built in!

RAVEN are back! This time with a series of beautiful Hi-Capas which offer an impressively strong recoil and cold-weather performance all in one. Coming included with a set of low-light ironsights and a 20mm Pistol Rail, this is a strong contender for king of the Hi-Capa platform.

RAVEN are back! This time with a series of beautiful Hi-Capas which offer an impressively strong recoil and cold-weather performance all in one. Coming included with a set of low-light ironsights and a 20mm Pistol Rail, this is a strong contender for king of the Hi-Capa platform.

If you're a practical skirmisher seeking a lightweight and cost-effective primary ready to host the most modern accessories, the Specna Arms SA-F08 FLEX™ HAL¹ ETU M4/AR-15 AEG is one to watch. Being part of Specna's FLEX™ line, this AEG is constructed almost entirely from high density polymer with a solid alloy outer barrel, ideal for mobile, agile and hostile playstles!

Inside, we are treated to Specna's latest programmable MOSFET, known as the HAL¹. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-F08, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight increase in FPS from the same strength spring.

On the outside, the SA-F08 is equipped with a 14mm CCW male threaded barrel, ready for a tracer unit or suppressor, an M-LOK handguard for your mission essential doo-dads, grips and other handling enhancements and a 20mm Picatinny railed receiver, ready for your choice of optical sight. If you're looking for an affordable entry point to Airsoft which will keep you competitive, the Specna Arms SA-F08 FLEX™ HAL¹ ETU M4/AR-15 AEG is a fantastic choice!

A spring-powered Airsoft Sniper Rifle which is based on the highly successful and widely compatible VSR-10 model. Coming out of the box at 440 FPS w/ 0.2g BBs with a smooth cycling bolt and Real Wood furniture, this is the ideal Sniper Rifle for someone who wants maximum realism and minimal setup / fuss.

If you're into historical platforms and seek the most realistic experience, check out the S&T PPSh-41 EBB Submachine AEG; Real Wood! This beast boasts full metal construction and a gorgeous real wood stock, making use of a high proportion of steel in the build for an authentically hefty feel in the hands and a truly realistic experience. The iconic PPSh-41 silhouette is completed with the included drum magazine which is constructed from steel and holds an incredible 2000 BBs. While this PPSh-41 is compatible with both stick and drum magazines from S&T, the included drum is probably enough!

To make matters all the sweeter, the S&T PPSh-41 has an Electro-Mechanical blowback mechanism which cycles the mock bolt each time you fire with an exciting "clack clack clack". We would be lying to you if we said this was proper recoil, but the slight jolt and mechanical noise as you fire makes this retro SMG a real blast to shoot, way more interesting than a standard AEG. 

Inside the unique gearbox shell we have 18:1 ratio steel gears running on 8mm steel slide-bearing bushings and the rotary HOP-up unit is paired with a 6.03mm tightbore inner barrel to give you the edge in accuracy. If you're in search of a WW2-era Ruskie replica well suited to a highly mobile playstyle, the S&T PPSh-41 EBB Submachine AEG; Real Wood is a fine choice!

If the standard VSR-10 style sniper rifle just doesn't do it for you, perhaps this one will! The Novritsch SSG10 A3 uses the same action and internals as the original SSG10 A1 but replaces the standard rifle stock with the slick and modern Maple Leaf MLC-S2 chassis, complete with a Novritsch branded butt plate.

The MLC-S2 transforms the SSG10 into a highly modular platform with a side folding stock boasting full adjustability, 1913/20mm Picatinny stock interface, M-LOK slots on the sides and a 20mm Picatinny bipod rail at 6 o'clock. This combination of superbly tuned internals from the original Novritsch sniper rifle with the advanced MLC-S2 Chassis makes the SSG10 A3 a likely candidate for the best out-of-the-box sniper rifle for performance-oriented skirmishers!

Those looking for a more ergonomic alternative to the standard VSR/BAR-10 shape, the SSG10 A2 from Novritsch is what you need. Based on the SSG10 A1 with its full complement of upgraded internal parts, the A2 adds a gorgeous ergonomic chassis styled similarly to the real steel MacMillan A4 stock with some unique Novritsch twists.

All the best parts of the original SSG10 are present in the A2 version, including a plethora of CNC-machined aluminium and steel parts, a 6.01mm tightbore inner barrel and Maple Leaf 60-degree HOP-up rubber, offering near-flawless performance straight out of the box. If you want to get sniping with a highly ergonomic platform which is pre-upgraded to the nines, the SSG10 A2 will be an asset to you!

Those looking for a more ergonomic alternative to the standard VSR/BAR-10 shape, the SSG10 A2 from Novritsch is what you need. Based on the SSG10 A1 with its full complement of upgraded internal parts, the A2 adds a gorgeous ergonomic chassis styled similarly to the real steel MacMillan A4 stock with some unique Novritsch twists.

All the best parts of the original SSG10 are present in the A2 version, including a plethora of CNC-machined aluminium and steel parts, a 6.01mm tightbore inner barrel and Maple Leaf 60-degree HOP-up rubber, offering near-flawless performance straight out of the box. If you want to get sniping with a highly ergonomic platform which is pre-upgraded to the nines, the SSG10 A2 will be an asset to you!

If you are looking for a secondary weapon with a bit more "oomph" than a pistol, the M56B has your name on it! This pistol grip equipped breaching shotgun fires 3 BBs per trigger pull, giving you a realistic shotgun-like spread pattern to ensure you can hit those fast-moving targets in CQB. This shotgun is constructed with an alloy outer barrel and mock magazine tube, and a polymer receiver with a rubberised pump and pistol grip. The short overall length of this shotgun makes it perfect to be carried in a back scabbard and whipped out when there are rooms to be cleared.

If you're looking for an affordable beginner Airsoft gun with a unique look, the CYMA CM.508 M4A1 S-System AEG should be right up your street! This M4 AEG is battery-powered and constructed predominantly from ABS polymer with an alloy version 2 gearbox based on the Tokyo Marui design. This keeps the build light and easy to move with, ideal for younger skirmishers or those looking for something lighter than a full metal primary for late in the skirmish day. 

The alloy version 2 gearbox the CM.508 is based around is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

On the outside, the CM.508 is ready for 20mm Picatinny accessories such as red dot sights, scopes, tactical flashlights, lasers and vertical grips, ready to be customised for the mission at hand. The barrel is threaded to 14mm CCW male, meaning suppressors and tracer units can be added for sneaky styling and an instinct-aiming advantage. If you want to try your hand at Airsoft skirmishing or target shooting without breaking the bank, the CM.508 M4A1 S-System AEG from CYMA is the most affordable way to do it!

The CYMA CM.121S is a replica of the fearsome Desert Eagle in Airsoft Electric Pistol form with a twist. This AEP is built around a MOSFET which leaves you with a savage Rate of Fire and much higher performance than a normal AEP.

The CYMA CM.121S is a replica of the fearsome Desert Eagle in Airsoft Electric Pistol form with a twist. This AEP is built around a MOSFET which leaves you with a savage Rate of Fire and much higher performance than a normal AEP.

Ever wanted AK-sized magazines on a rifle that handles like an M4? If so you have found your niche!

The M918G is a replica of the AR47 rifle which was designed for special forces troops operating behind enemy lines with limited access to NATO ammunition.

It is constructed almost from reinforced polymer, with an alloy outer barrel and buffer tube to provide a strong backbone and well-rounded weight balance. The rifle also boasts more than its fair share of internal enhancements, especially when you consider the price of this AEG!

Ever wanted AK-sized magazines on a rifle that handles like an M4? If so you have found your niche!

The M918G is a replica of the AR47 rifle which was designed for special forces troops operating behind enemy lines with limited access to NATO ammunition.

It is constructed almost from reinforced polymer, with an alloy outer barrel and buffer tube to provide a strong backbone and well-rounded weight balance. The rifle also boasts more than its fair share of internal enhancements, especially when you consider the price of this AEG!

If you are after a modern sniper rifle platform with a cutting edge look and upgraded internals straight out of the box, the CYMA CM.708-U should be right up your street! This rifle is the upgraded version of the original CM.708 and boasts a steel cylinder with a low friction coating, a brass cylinder head, an aluminium piston with a rubber shock-absorbing pad and a 90-degree piston catch/sear. 

These components combine to improve the lifespan of the CM.708 and improve its air seal qualities and reduce friction in the action for a higher quality feel and an easier bolt pull. Why not save yourself the trouble of upgrading your sniper rifle and get one with all the trimmings straight from the factory?

For those of you starting out in Airsoft skirmishing the CM.126 is a great starter pistol for beginners, or a budget friendly sidearm for when your primary is empty and need to quickly switch to a backup. 

Ready to go out of the box, this electric Airsoft 6mm BB gun gets you straight into battle, and even features an adjustable Hop-up.

With an alloy mock slide and polymer frame construction, the CM.126 is lightweight and efficient at both semi and full automatic, this pistol has everything you need to get you on the field.

For those of you starting out in Airsoft skirmishing the CM.126 is a great starter pistol for beginners, or a budget friendly sidearm for when your primary is empty and need to quickly switch to a backup. 

Ready to go out of the box, this electric Airsoft 6mm BB gun gets you straight into battle, and even features an adjustable Hop-up.

With an alloy mock slide and polymer frame construction, the CM.126 is lightweight and efficient at both semi and full automatic, this pistol has everything you need to get you on the field.

A Pump Action, Spring Powered Tri-Burst Airsoft Shotgun, which accepts an Airsoft Shotgun Shell inside the breech, and will fire three BBs which each Trigger pull. This tactical variant comes supplied with a 12ga Choke and 20mm Receiver Rail, as well as a Shell Holder, Speedloader and Shotgun Shell.

A Full Metal Airsoft Shotgun which is Tri-Burst and Spring Powered, meaning it will throw 3 x BBs down range towards your target with each pump of the Shotgun (and pull of the trigger). This tactical variant comes supplied with a 12ga Choke and 20mm Receiver Rail.

Those in search of a modern AR with a long range leaning, check this out! The DA-A15-ETU ALPHA™ 13" M-LOK M4/AR-15 from Delta Armory brings the cutting-edge styling of the slickest real steel M4s out there along with pre-upgraded internals pushed to the max, making it a serious foe to face down with in an outdoors environment.

As with the other ALPHA™ line AEGs from Delta, the DA-A15-ETU boasts full metal construction with flawless machining throughout, but unlike standard ALPHA™ AEGs, this one is the ETU version. Delta's ETU AEGs are even more upgraded than the standard ALPHA™ line, boasting a pre-installed programmable ETU/MOSFET, a high torque motor, CNC steel 16:1 gears and CNC aluminium piston and cylinder heads. Whether you are going full DMR with this build or using it as it comes, you are very well equipped for long range warfare with the DA-A15-ETU!

Whether you're a veteran skirmisher looking for a lightweight backup or a newcomer seeking superb bang for your buck, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG should suit you perfectly! The SA-F04-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG is what you need!

Whether you're a veteran skirmisher looking for a lightweight backup or a newcomer seeking superb bang for your buck, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG should suit you perfectly! The SA-F04-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG is what you need!

This gas-powered Airsoft Shotgun is a super tactical variant of the Golden Eagle Type 870 series, and offers 3rnd and 6rnd shot modes. With an Internal Gas Tank in the Buffer Tube, this Shotgun can be filled up on the fly, and is one of the most realistic Gas Shotguns you can get at the moment, without choosing a shell ejecting model.

MK18 fans, rejoice! The DA-A07-EGL ALPHA™ MK18 MOD.1 M4/AR-15 AEG is yet another fantastic full metal MK18 option, equipped with full metal ALPHA™ standard externals and Delta Armory's latest programmable MOSFET, known as the EAGLE™.

The EAGLE™ programmable MOSFET offers more fire mode and customisation options than ever before. With sniper delay, AUG mode, semi-auto only, 3 or 5-round burst, binary trigger and selectable pre-cocking available, the DA-A07-EGL offers more options than any other MK18 in its price range. The EAGLE™ joins the usual Delta Armory 6.03mm tightbore inner barrel and rotary HOP-up unit, providing competitive performance straight out of the box. 

If a full metal MK18 is on your shopping list and you have a thing for programmable controls, the DA-A07-EGL ALPHA™ MK18 MOD.1 M4/AR-15 AEG is the MK18 for you!

In case you haven’t heard, the VMP-2 is VORSKs second long-gun platform designed as a multi-role carbine available in 3 unique variants. This, the VMP-2MD is the “recce rifle” variant, locked to semi-automatic only and tuned to DMR FPS levels. The MD is rocking the same handguard and sliding adjustable stock as the M version with a cheek riser added along with an extended barrel, making it ideal for mobile marksmen playstyles and long-range outdoor warfare!

The VMP-2 is compatible with standard VMP-1/MP9 magazines and makes use of a unique chassis system with QD sling sockets on each side, compatibility with M4/AR-15 GBBR pistol grips and the prolific M4/AR-15 buffer tube at the rear, offering full compatibility with aftermarket AR-15 stocks.

The HOP-up unit is a unique design with an external TDC adjuster, ideal for convenient mid-game setting changes to make the most of changing conditions, not to mention being an inherently accurate design. The HOP-up bucking and inner barrel are also VSR-10 spec, giving you almost unlimited options when it comes to tuning performance to meet your needs.

Our VMP-2 batch has now landed and is ready for immediate dispatch! Those who’ve already made their mind up, get your order in now to make sure you get one of the first VMP-2 platforms available worldwide!

If you're sick to death of M4/AR-15 AEGs, who can blame you? The Novritsch SSR77 A2 AUG AEG is a breath of fresh air, based on the old-school-cool AUG design with modern attachment interfaces and pre-upgraded internals throughout, ideal for the skirmisher who wants a unique primary platform with performance to match the latest M4 AEGs to hit the market.

On the outside, the SSR77 A2 is dressed to impress, boasting a unique CNC aluminium M-LOK handguard, reduced profile upper 20mm Picatinny rail and a pair of QD sling sockets on each side, ready to be decked out like the most cutting edge M4s. Inside, things are even more impressive! This is one of the first AUG replicas to hit the market with a programmable MOSFET pre-installed, meaning SSR77 owners can join the SSR4, UTR45 and Gate TITAN owners enjoying burst mode, binary trigger and several levels of pre-cocking adjustment. If you've ever mourned that all the sick technology is in M4 replicas, the SSR77 A2 AUG AEG should put a smile back on your face!

A 6mm Airsoft Gas Blowback Pistol, based on the B9 handgun, given a modern and Secret Agent inspired make-over. This Airsoft Replica Pistol features a realistic Blowback action that simulates recoil, and is the perfect companion to any Airsofter who wants to be more effective in CQB situations.

Get into Airsoft skirmishing with a modern tactical variant of the world renowned and iconic AK47.

With it's tried and true design, this AK makes for a great starter rifle and a great budget friendly gun that is reliable, thanks to it's alloy internals, barrel and top cover and also lightweight thanks to it's polymer construction.

The CM.028A comes with some tactical upgrades such as 20mm RIS/RAS railed handguard and threaded barrel to attach your favourite accessories.

Included in the package is a 525rnd Hi-cap magazine so you're ready to go with a huge BB capacity allowing you to lay down some serious supressing fire right out of the box..

The Double Eagle M904R is a lightweight but extremely effective Airsoft Electric Gun, powered by a Battery in the Stock. It is based around the 'Falcon Fire Control System' which offers a highly programmable and incredibly well-responding Trigger. If you're a fan of staying light on your feet, flanking the enemy and generally causing mayhem, this Airsoft Gun will do you proud on the skirmish field.