Gas Blowback Internal Parts

If you have hammer issues with your Army Armament Hi-Capa, this should help! The Hammer and Strut for Hi-Capa GBB Pistols from Army Armament is constructed from Aluminium and an original replacement part for the Army Armament Hi-Capa GBB series, including the R501, R504, R603, R608, R609 and potentially others. The set includes both the hammer and hammer strut and should be compatible with most TM clone Hi-Capa pistols, though it may need mods for anything other than Army Armament 'Capas. 

A replacement Hammer and Spring for the RAVEN EU18 automatic gas-powered pistol.

If your KJ Works B9/92 has trigger issues, this might be the key to getting it running again. The KJ Works Trigger Spring for B9/92 GBB Pistol is a replacement original part for the KJ Works B9 and B92 GBB pistol series and is constructed from spring steel. This is the spring that resets the trigger, so if your trigger gets stuck back after one shot this might solve your issue!

If you love your Novritsch pistols and want to keep them shooting pristine, keeping a spare Novritsch SSP1/SSP5 Nozzle can't hurt! This polymer loading nozzle is compatible with Novritsch SSP1/SSP5 GBB pistols and is a fantastic part to have lying around just in case a catastrophe strikes, especially if you often find yourself relying on your sidearm. If you're very attached to your Novritsch SSP1/SSP5 pistols and don't ever want them to sit around awaiting spare parts, grab this to put your mind at ease and get your Novritsch pistols back on the battlefield!

This hammer is an original replacement part for the Army Armament R601 JW3 GBB pistol but may also fit other Army Armaments Hi-capa based GBB pistols. A hammer is a great spare to have in the tool kit if you use your JW3 pistol heavily, as over time these tend to wear out due to the repeated impacts on the hammer with every shot. Having a spare hammer on hand for worst-case scenarios can help avoid disappointment and potentially a long wait for replacement parts and allow you to have your pistol back up and running quickly for its next outing.

An upgrade or replacement stock sear spring for gas blowback pistols. The spring is made of robust steel and therefore will hold its shape better than stock springs, which is perfect for keeping your trigger action to be short and crisp. Due to the springs high tolerance, there would be no need to shave it down to fit in your grip.

Whether your HOP-up rubber is worn out or you are seeking an upgrade, the Novritsch HOP-up Bucking for SSP1/SSP5 GBB pistol is one to keep an eye on. This HOP-up bucking is a big reason that Novritsch pistols have such incredible range, and being a VSR/GBB style HOP-up rubber, this should be compatible with most TM-based GBB pistol designs as well as the VSR-10 sniper rifle series.

If you want to take pure advantage of the inherent modularity of the VORSK VMP-2, these Complete Trigger Groups are the key! Available in semi-auto only for DMR builds or select fire (semi/full auto) for assault rifle setups, the VORSK Complete Trigger Group for VMP-2 Series is constructed from alloy with steel springs, pins and screws.

If you're rocking the VMP-2D or VMP-2MD, the select fire version will allow you to convert your DMR into an assault rifle, though you'll also need a low power nozzle to keep your build site legal. Installing the semi-auto only version in the VMP-2M will lock it to semi-auto, allowing you to pop a high power nozzle inside and run it as a compact DMR!

Each trigger group comes pre-built and equipped with ambidextrous fire controls, making it an almost literal "drop in" installation. No need to fiddle with small springs and awkward little screws installing these! Despite the super easy installation, any internal modification made will void the VMP-2's original 12-month warranty so we only recommend these for the pros!

If you love your SSX23 and would hate to see it out of action, grab the Novritsch Nozzle Assembly Set for SSX23 NBB and keep it in the parts stash just in case! This nozzle assembly is a replacement original part designed for the SSX23 N-BB pistol from Novritsch and is constructed from a high-density polymer. Nozzles are a known failure point for pistols and as reliable as the SSX23 is, it's always wise to have spare parts so you can keep your beast of a pistol up and running!

If you are fixing up your Hi-capa or 1911 you might need one of these! The Slide Stop/Safety Spring and Plunger includes the dual purpose slide stop/safety spring and the plunger for each, making it the perfect replacement set for those who have lost or damaged these parts. All components in this set are constructed from steel, and are designed to fit the Army Armament 1911 and Hi-capa GBB pistols but may fit others based on the Tokyo Marui internal design. 

This is a set of spare O-rings for Novritsch SP1, SSP2 & SSP5 V2 magazines. They are the perfect replacement parts for magazines that are leaking gas. Become a maintenance master and fix your leaky mags, rather than spending extra on new ones. Should your magazine spring a leak, a spare set of O-Rings is always handy. 

Fix your Novritsch magazines so they're skirmish-ready, or have some spare parts should the worst scenario occur. The Novritsch SSP2 O-Ring Set gives your magazines a second chance at fighting!

If you love your SSP18 and want to keep it shooting in the long term, having a Novritsch SSP18 Complete Nozzle can't hurt! This polymer loading nozzle is compatible with Novritsch SSP18 GBB pistols and is a fantastic part to have lying around to pre-empt potential disaster, especially if you use full auto a lot. If you're very attached to your SSP18 and don't ever want it to sit around awaiting spare parts, grab this to put your mind at ease!

The CYMA CGS Feed Lips & Gas Route Bucking Set for ZET System M4 GBBR provides 5 sets of feed lips and 5 gas route buckings for your magazines, allowing you to fix up old mags or keep spares handy just in case. This set is designed for TM ZET system M4 GBBR mags and should also fit clones of the TM design, including CYMA CGS M4 GBBR mags and Double Eagle M4 GBBR mags. 

The included feed lips are an ideal spare part to have on hand; as any experienced GBBR user will know, dropping a hefty gas mag is likely to break the lips and render the magazine useless. The Gas Route Buckings are also very useful in the event your magazine develops a leak from the top, and can also help improve gas efficiency should you decide to upgrade your TM or Double Eagle M4 GBBR with a steel CGS bolt carrier group. If you're getting in deep with ZET system GBBRs, this set belongs in your toolbox!

An aftermarket upgrade/replacement Inner Barrel and HOP Unit/Rubber for Hi-Capa Series Airsoft Pistols, specifically the Army Armament R601. This awesome package provides you with a Precision 6.02mm Inner Barrel, as well as a HOP Chamber, ML 70° Bucking and 'I-Key Delayer', to improve range, accuracy and precision.

The installation of this unit is relatively straightforward, and will be compatible with beginner/experienced techs.

If you love your SSP2 and would hate to see it out of action, grab the Novritsch Nozzle Set for SSP2 GBB and keep it in the parts stash just in case! This nozzle is a replacement original part designed for the SSP2 Hi-Capa GBB pistol from Novritsch and is constructed from high density polymer. Nozzles are a known failure point for GBB pistols and as reliable as the SSP2 is, it's always wise to have spare parts so you can keep your beast of a 'Capa up and running!

If you lost a safety from your R28 or R32 1911 GBB pistol, this set should sort you out! The Army Armament Ambidextrous Safety Catches for R28/R32 1911 GBB Pistols includes both the left and right side safety catches, both of which are constructed from alloy. These safety catches are specifically designed for Army Armament 1911 platforms but are potentially compatible with other brands, though you may need to carry out modifications. 

Whether you want to spice up your Hi-Capa with some metallic accents or you need a hard-wearing manual safety which will never let you down, the Airsoft Masterpiece EDGE "ALBATROSS" Ambi Safety for TM Hi-Capa GBB Pistols will do the trick! This manual safety catch set includes the left and right side safety catches, both extended designs for easy access, complete with serrated surfaces for flawless traction. 

The ALBATROSS Ambi Safety is CNC machined from aluminium, giving it a flawless form; exactly what we would expect from a high-end manufacturer like Airsoft Masterpeice. Compatibility-wise, this set is designed specifically for the Tokyo Marui Hi-Capa GBB range but may also fit other brands, though you may need to carry out modifications. Available in a plethora of colour options, from tactical black to metallic purple, the ALBATROSS Safety from Airsoft Masterpiece EDGE is ideal for any build style or aesthetic preference!

Whether you want to spice up your Hi-Capa with some metallic accents or you need a hard-wearing manual safety which will never let you down, the Airsoft Masterpiece EDGE "ALBATROSS" Ambi Safety for TM Hi-Capa GBB Pistols will do the trick! This manual safety catch set includes the left and right side safety catches, both extended designs for easy access, complete with serrated surfaces for flawless traction. 

The ALBATROSS Ambi Safety is CNC machined from aluminium, giving it a flawless form; exactly what we would expect from a high-end manufacturer like Airsoft Masterpeice. Compatibility-wise, this set is designed specifically for the Tokyo Marui Hi-Capa GBB range but may also fit other brands, though you may need to carry out modifications. Available in a plethora of colour options, from tactical black to metallic purple, the ALBATROSS Safety from Airsoft Masterpiece EDGE is ideal for any build style or aesthetic preference!

Whether you want to spice up your Hi-Capa with some metallic accents or you need a hard-wearing manual safety which will never let you down, the Airsoft Masterpiece EDGE "ALBATROSS" Ambi Safety for TM Hi-Capa GBB Pistols will do the trick! This manual safety catch set includes the left and right side safety catches, both extended designs for easy access, complete with serrated surfaces for flawless traction. 

The ALBATROSS Ambi Safety is CNC machined from aluminium, giving it a flawless form; exactly what we would expect from a high-end manufacturer like Airsoft Masterpeice. Compatibility-wise, this set is designed specifically for the Tokyo Marui Hi-Capa GBB range but may also fit other brands, though you may need to carry out modifications. Available in a plethora of colour options, from tactical black to metallic purple, the ALBATROSS Safety from Airsoft Masterpiece EDGE is ideal for any build style or aesthetic preference!

If you have an Army Armament 1911 GBB with a broken nozzle you are in luck! The Army Armament Nozzle for 1911 GBB Pistol is a replacement original part designed for the Army Armament 1911 GBB series, including the R26, R28, R31 and R32 pistols. This nozzle may also work with TM-compatible 1911 pistols from other brands, but as always we only recommend brand mixing for the experts as this may require fine-tuning and modification.

If you've had a mishap with your R36 GBBR or you want to keep spares handy just in case, the Army Armament Nozzle for R36 GBBR belongs in your toolbox! This is a replacement original part for the R36 GBBR series and may also fit WE AR36 GBBRs but we cannot confirm that. The set includes a polymer nozzle and a steel nozzle spring which is thoughtfully pre-installed, saving you some fiddling!

So you have yourself a snappy pistol, but you want MORE speed? If you say so! The RS1 recoil spring from CowCow replaces your original recoil spring and will increase the speed at which your slide returns to battery, increasing the cyclic rate. Perfect for those who need that extra bit of speed!

An absolute monster of an upgrade to make to your weapon. The external surface is ribbed to keep your inner barrel more stable inside your hop up unit with next to no play at all after you have fully re-assembled your Airsoft weapon.

A high quality replacement Hop up rubber, made to 70 degrees of hardness, and designed for VSRs, as well as KJW and WE Airsoft designs.

This is a longer inner barrel for the Novritsch SSP18 pistol. It adds an extra 15mm of length to the barrel. This time, for superior accuracy and power, size absolutely matters... The longer a barrel is, the more time there is for a BB to speed up and spin. This makes it more precise and faster when leaving the barrel, providing you with a more consistent shot so you can dominate your skirmishes with ease.

It is ideal for those who like to use a compensator or suppressor on their SSP18. Unfortunately, due to the extra length, it’s not compatible with most tracer units. This is a technical part and it is only encouraged to install if you are confident in your knowledge and skills.

A pre-built drop in hop-up unit and barrel set up built by Maple Leaf with their best parts already included in it. The kit can be dropped into any Tokyo Marui / KJ Works M1911 / MEU Series gas blowback Airsoft pistol for instant results. The set includes an alloy Hop-Up unit, 60 Degree hop-up rubber and Crazy Jet Inner barrel for high performance and improved accuracy. This is perfect for those who are looking to upgrade their pistol with minimum effort.