NUPROL

A 14mm CCW compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, teammate locations, run infection themed skirmishes and generally lighting up the dark with bioluminescence.

Looking for the biggest capacity with no rattle? This NUPROL 200rnd Mid-cap is an extended design, allowing an extra 70 BBs to squeeze in when compared to 30 round style mags. Its spring-loaded mechanism means you will be able to sneak around with ease with none of the tell-tale "battle rattle" you would have from high-capacity mags, and benefit from some extra firepower at the same time! This magazine is loaded just like any other Airsoft mid-cap, using a speed loader or loading rod through the fill/feed port at the top of the magazine body. The added benefit of this mag is its much more aggressive 40-round style design, which gives your rifle the "big boy" look of extra capacity, making it that more intimidating to face down with on the skirmish field.

If you are looking for tracer BBs in heavier weights to maximise your effective range, NUPROL have what you need! The RZR 0.25g Precision Tracer BB has the same ultra-tight +/- 0.01mm tolerances as NUPROL's standard BBs but are tracer BBs which will glow when fired through an Airsoft tracer unit, helping you instinct aim in close quarters and guide your BBs onto target in low light settings. 

These BBs are available in both red and green, but if you want red tracers make sure you check your tracer unit can light up red tracer BBs as not every unit can. 

If you are looking for tracer BBs in heavier weights to maximise your effective range, NUPROL have what you need! The RZR 0.25g Precision Tracer BB has the same ultra-tight +/- 0.01mm tolerances as NUPROL's standard BBs but are tracer BBs which will glow when fired through an Airsoft tracer unit, helping you instinct aim in close quarters and guide your BBs onto target in low light settings. 

These BBs are available in both red and green, but if you want red tracers make sure you check your tracer unit can light up red tracer BBs as not every unit can. 

If you are looking for tracer BBs in heavier weights to maximise your effective range, NUPROL have what you need! The RZR 0.25g Precision Tracer BB has the same ultra-tight +/- 0.01mm tolerances as NUPROL's standard BBs but are tracer BBs which will glow when fired through an Airsoft tracer unit, helping you instinct aim in close quarters and guide your BBs onto target in low light settings. 

These BBs are available in both red and green, but if you want red tracers make sure you check your tracer unit can light up red tracer BBs as not every unit can. 

A balance charger for LiPo and Li-Ion batteries (Lithium Polymer and Lithium Ion), which features both 2 Cell and 3 Cell balance ports to handle 7.4v and 11.1v batteries, as well as a handy status LED for each cell.

Be safe while charging your Airsoft batteries! If it goes wrong, it really goes wrong. The NUPROL LiPo Safe Charging Bag - 0.8L is designed to store LiPo batteries and other Lithium batteries plus their charger during the charging process, reducing the chances of damage in the event of a LiPo / Battery fire. Better to be safe than sorry!

This charging bag is the perfect size to hold a charger and a battery when charging or to store a small amount of spare batteries when they're not in use.

Having more magazines in your loadout means more opportunities to get kills! The NUPROL W-Mag is the latest in NUPROL's line of AEG mid-capacity magazines, sporting a high-density polymer shell, a steel feed spring and a rubber baseplate which both protects the internals of the magazine in the event that it is dropped, and allows the magazine to be used as an improvised shooting support using a technique known as "mag-podding".  This magazine is a spring-loaded design and can be filled using a standard Airsoft speed loader through the fill/feed port at the top of the magazine.

If you are looking for heavy-weight biodegradable BBs, NUPROL's RZR BBs would be a great choice! RZRs have a superb reputation for precision and tight tolerances and this version is made from a biodegradable material which means you can shoot as much as you want without worrying about cleanup afterwards. 

If you are looking for heavy-weight biodegradable BBs, NUPROL's RZR BBs would be a great choice! RZRs have a superb reputation for precision and tight tolerances and this version is made from a biodegradable material which means you can shoot as much as you want without worrying about cleanup afterwards. 

Built by NUPROL as part of their Power range this is a high quality charger designed to charge LiPo, NiMh, LiFe, LiHv, LiLo, NiCd and PB batteries, all of the most common types of battery used in Airsoft replicas, as well as some rarer types used in RC Car racing.

High quality WE 11.1v 1450mAh 30C LiPo Stick Battery, provides great battery life and fits most battery compartments. The 30C rating means the battery discharges quicker to give a higher rate of fire and better trigger response.

If you are a midcap user you will know all too well the struggle to quickly reload your magazines between games. Thankfully, NUPROL has the answer! Introducing the 3000rnd BB loader, a design based on existing crank-operated speedloaders but in a more compact form with almost double the capacity!

An Airsoft replica helmet that's lightweight, features solid construction with enough Velcro to complete cover your head in your favourite patches and glow gel strips. 

An Airsoft replica helmet that's lightweight, features solid construction with enough Velcro to complete cover your head in your favourite patches and glow gel strips. 

A high performance gas, designed to operate at lower temperatures (between 3c - 20c) allowing to use your weapon all year round. Using this high power mix gives an increase in FPS, GBB efficiency and a harder kick.

Looking for a unqiue modern mag for your M4? The NUPROL 380rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms and has an ultra-modern look thanks to its hex pattern texture. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look! 

Looking for a unqiue modern mag for your M4? The NUPROL 380rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms and has an ultra-modern look thanks to its hex pattern texture. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look! 

A retention holster designed to fit snugly WE Europe/Armorer Works Hi-Capa Series Airsoft Pistols and can be attached to the users belt. The holster is designed to allow the user to quickly and effectively draw their pistol during combat at maximum speed, whilst still remaining safe. 

If you are looking for a posh charger that isn't going to confuse you with a thousand different functions, the NUPROL Balance Charger Pro is the one! This charger works very similarly to other balance chargers but adds an LCD readout display so you can check cell capacity, and adjust the battery type and current settings via the button on the front of the charger.

The charger is compatible with 7.4V and 11.1V Lithium batteries (LiPo, LiFe and Li-ion) and can also charge NiMH batteries with the included 4-pin balance to mini-Tamiya adapter cable. Battery status is indicated by 2 coloured L.E.Ds on the front of the charger body. The charger is packaged with a 2-pin AC adapter and a fused 3-pin UK plug adapter, and to connect the two is as simple as installing the 2-pin connector into the plug and tightening down the central screw with a Phillips head or Pozidriv screwdriver.

If you are looking for a charger upgrade but you don't want to read a manual the length of the Dictionary, the NUPROL Balance Charger Pro gives you all the options you will need without making things overly complex!

If you are looking for short M4/AR15 Airsoft magazines, whether it is for a Vietnam War re-enactment or you just want to get nice and low with your DMR to make good use of cover, NUPROL has the answer. This 110rnd Mid-cap magazine is constructed with a steel shell and polymer internals with a steel feed spring and is super short and easy to carry plenty of.

This magazine is patterned after the real world 20-round M16 magazine issued during the early Vietnam war which also found use in SPR and DMR rifles in the much more recent Iraq and Afghanistan conflicts. This magazine is a spring-loaded mid-cap and is loaded using a speed loader or loading rod/tool through the fill/feed port at the top of the magazine body.

If you are looking for short M4/AR15 Airsoft magazines, whether it is for a Vietnam War re-enactment or you just want to get nice and low with your DMR to make good use of cover, NUPROL has the answer. This 110rnd Mid-cap magazine is constructed with a steel shell and polymer internals with a steel feed spring and is super short and easy to carry plenty of.

This magazine is patterned after the real world 20-round M16 magazine issued during the early Vietnam war which also found use in SPR and DMR rifles in the much more recent Iraq and Afghanistan conflicts. This magazine is a spring-loaded mid-cap and is loaded using a speed loader or loading rod/tool through the fill/feed port at the top of the magazine body.

A recent magazine design that is optimized for the 416 style receiver, the NUPROL LS-Mag EXT Hi-Cap Magazine 450rnd is fully compatible with SCAR-L and M4/AR15 AEG replicas. The magazine holds 450 rounds and is filled via the top fill window. The magazine is constructed from high-density polymer with a steel feed spring, keeping the weight low but providing decent drop and scratch resistance.

The magazine design features strengthening ribs across its surfaces which also double as an area to grip when shooting your AEG in an unconventional stance. On the right side of the magazine body we can find markings indicating "30" next to a bullet symbol, and "Cal. 5.56x45" indicating the calibre of cartridge this style of magazine holds in the real firearm equivalent.

If you need more capacity, but don't want the rattle from carrying high capacity mags, this is what you'll need. With a respectable 200 round capacity, this magazine holds more than comparable mid-caps without being significantly larger than a standard M4/AR15 magazine, allowing it to fit into standard M4/AR15 mag pouches easily.

A recent magazine design that is optimized for the 416 style receiver, the NUPROL LS-Mag EXT Hi-Cap Magazine 450rnd is fully compatible with SCAR-L and M4/AR15 AEG replicas. The magazine holds 450 rounds and is filled via the top fill window. The magazine is constructed from high-density polymer with a steel feed spring, keeping the weight low but providing decent drop and scratch resistance.

The magazine design features strengthening ribs across its surfaces which also double as an area to grip when shooting your AEG in an unconventional stance. On the right side of the magazine body we can find markings indicating "30" next to a bullet symbol, and "Cal. 5.56x45" indicating the calibre of cartridge this style of magazine holds in the real firearm equivalent.

If you need more capacity, but don't want the rattle from carrying high capacity mags, this is what you'll need. With a respectable 200 round capacity, this magazine holds more than comparable mid-caps without being significantly larger than a standard M4/AR15 magazine, allowing it to fit into standard M4/AR15 mag pouches easily.

A LiPo battery for Airsoft Electric Guns which has been designed to output a high power for fast and consistent trigger response and high rate of fire for up to 3 quarters of a day on a slow charge. 

An ultra thin and lightweight battery, perfect for squeezing into even the tightest spots. The battery provides 1200mAh of power with a discharge rate of 20c, giving it a 20w output. 

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss! This magazine is an autowinding design which requires 3x AAA batteries to operate. 

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs. 

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss! This magazine is an autowinding design which requires 3x AAA batteries to operate. 

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs. 

Produced by NUPROL, these Airsoft Tracer BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the new RZR range of Airsoft BBs ranging from lightweight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These particular are that of Tracer BBs in your choice of either red or green. These BBs, when shot are infused light to allow them to glow in the dark.

This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.

Produced by NUPROL, these Airsoft Tracer BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the new RZR range of Airsoft BBs ranging from lightweight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These particular are that of Tracer BBs in your choice of either red or green. These BBs, when shot are infused light to allow them to glow in the dark.

This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.