NUPROL

If you are looking for something cheap and cheerful that you can throw on for a bit of a plinking session, NUPROL has your back! The Protective Airsoft Safety Glasses are simple protective glasses available in either clear or light enhancing yellow tint, and come with their own carry case to keep the lenses scratch free in the kit bag. 

These glasses are rated EN166, providing the impact protection necessary to withstand direct BB hits at UK velocity levels and the lenses also have an anti-fog coating to keep your view of the target clear. 

Ever heard of the MG36? Potentially not, as this support weapon version of the AR36 never made it past the prototype stage, though the elite German KSK has been sighted running a similar setup in the early 2000s in Afghanistan. The NUPROL 1200rnd Electric drum magazine allows you to add some serious MG36 like firepower to your AR36 platform AEG, and transform it to provide supporting fire for the team. This drum magazine is constructed from high-density polymer with a modern design aesthetic, fitting in perfectly with the all polymer, highly modern AR36 platform. This magazine is an autowinding design which requires 3x AAA batteries to operate. 

If you have damaged your battery connector or you need spares for a build project, this set will sort you out! The NUPROL Mini-Tamiya Connectors Set includes 2 male and 1 female mini-Tamiya connectors with black external connectors.

The packaging states that the set includes 1 male and 2 female connectors but this is based on the external connector design. What is actually included is one connector for your gun(female) and 2 for the battery side(male), click here to see why we classify battery connectors this way.

A useful spare to have around for repairs and equally useful for scratch builds, the NUPROL Mini-Tamiya Connectors Set is a great set to have around just in case!

A replacement bulb cap, which is used to secure CO2 Bulbs in the bottom of WE EU Magazines and P&M Series Pistol Magazine. The cap is constructed from alloy, and is finished black, and features a large Allen Key hole in the bottom. 

If you are looking for short M4/AR15 Airsoft magazines, whether it is for a Vietnam War re-enactment or you just want to get nice and low with your DMR to make good use of cover, NUPROL has the answer. This 190rnd Hi-cap magazine is constructed with a steel shell and polymer internals with a steel feed spring and is super short and easy to carry plenty of.

This magazine is patterned after the real world 20-round M16 magazine issued during the early Vietnam war which also found use in SPR and DMR rifles in the much more recent Iraq and Afghanistan conflicts. This magazine is a wheel wound high-cap and is loaded using the top fill window and reloaded by winding the bottom wheel.

If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 380rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams an extra 80 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.

The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.

If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 380rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams an extra 80 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.

The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.

If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 380rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams an extra 80 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.

The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. This hi-cap magazine holds 380 BBs and is loaded through its feed window, located on the top of the magazine body. This magazine is constructed from strong polymer, while still being lightweight, so you can carry more mags and still run round the field with ease. This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see the winding gears.

If you need magazines for your A&K Dragunov SVD these should fit the bill! The NUPROL 110rnd High-Cap magazine for A&K SVD is designed to work in the A&K Dragunov SVD AEG series but will not work in the CYMA or Real Sword SVDs. The magazine fits the classic SVD aesthetic thanks to its stamped steel shell complete with reinforcing ribs.

The magazine can be filled via the fill window at the top rear of the magazine and the winding wheel is located on the baseplate and needs to be wound in order to tension the magazine. 

A LiPo stick battery designed to fit in handguards in replacement of the traditional 1600mAh NiMH blocks (G36 handguards etc). 

Designed to be attached to Rigs, Vests, Carriers as well as Belts allowing you to conveniently carry around additional shells. This is a much neater way of getting shells rather than storing them loose in pockets or in admin pouches.

This is an open-top retention pouch designed for 5.56mm magazines, however, due to it being able to open up much wider, this pouch will work for 7.62mm magazines also.

This is an open-top retention pouch designed for 5.56mm magazines, however, due to it being able to open up much wider, this pouch will work for 7.62mm magazines also.

A degreasing spray from NUPROL intended primarily for Airsoft applications such as cleaning old grease and grime out of a gearbox, barrel or anywhere else it is that it shouldn't be! This Degreaser can be used on alloy and plastic parts but we do not advise using it on rubber components due to its petroleum content.

A MOLLE compatible double AR36 magazine pouch, designed to be attached to tactical equipment like rigs and vests, and is suitable for both AEG and GBBR AR36 Airsoft magazines. 

A MOLLE compatible double AR36 magazine pouch, designed to be attached to tactical equipment like rigs and vests, and is suitable for both AEG and GBBR AR36 Airsoft magazines. 

A MOLLE compatible double AR36 magazine pouch, designed to be attached to tactical equipment like rigs and vests, and is suitable for both AEG and GBBR AR36 Airsoft magazines. 

An Airsoft Gun Battery designed and built by NUPROL specifically for Airsoft Skirmishers and are part of their POWER range of Batteries.

Do you want to cause problems at your local CQB site? There's no better way than with the Acetech AceHive Grenade! This compact area denial tool is compatible with 40mm MOSCART launchers, so you can give a nasty surprise to any skirmisher who enters your personal space. It holds 80 BBs, 10 in each tube. The clear polymer design allows you to keep an eye on your BBs so you can make sure this grenade is fully loaded to unleash the full wrath of this Grenade!

This grenade can be loaded using a speed loader straight into the holes at the top of the MOSCART. The brass gas fill valve is located on the front/top of the shell. When filling this grenade we advise that you wear eye protection throughout the process and fill the gas before filling the BBs. Once filled with BBs and gas, the grenade is now primed and ready. Once the steel knocker valve is pressed, it will unleash a massive shotgun-like spread of BBs, lots of fun for the user and terrifying for the unfortunate opponent!

The purple flashy colour is an excellent hint of style whilst you traverse the battlefield. The larger capacity is slightly longer but they are both compatible with 40mm grenade launchers such as an under-barrel launcher or "pocket rocket" style pistol. If you like to be a skirmish nuisance, the NUPROL 40mm MOSCART Gas Grenade is a great choice for you!

Do you want to cause problems at your local CQB site? There's no better way than with the Acetech AceHive Grenade! This compact area denial tool is compatible with 40mm MOSCART launchers, so you can give a nasty surprise to any skirmisher who enters your personal space. It holds 80 BBs, 10 in each tube. The clear polymer design allows you to keep an eye on your BBs so you can make sure this grenade is fully loaded to unleash the full wrath of this Grenade!

This grenade can be loaded using a speed loader straight into the holes at the top of the MOSCART. The brass gas fill valve is located on the front/top of the shell. When filling this grenade we advise that you wear eye protection throughout the process and fill the gas before filling the BBs. Once filled with BBs and gas, the grenade is now primed and ready. Once the steel knocker valve is pressed, it will unleash a massive shotgun-like spread of BBs, lots of fun for the user and terrifying for the unfortunate opponent!

The purple flashy colour is an excellent hint of style whilst you traverse the battlefield. The larger capacity is slightly longer but they are both compatible with 40mm grenade launchers such as an under-barrel launcher or "pocket rocket" style pistol. If you like to be a skirmish nuisance, the NUPROL 40mm MOSCART Gas Grenade is a great choice for you!

A belt-mountable Double Magazine Retention Holster designed for WE Europe Airsoft F226 Standard Sized Magazines, allowing users ready and easy access to their magazines.

A LiPo saddle battery designed to fit in handguards in replacement of the traditional 1600mAh NiMH blocks/saddles (G36 handguards etc).

A humungous 7.4v LiPo battery in a Crane Stock / Nunchuck configuration which offers a massive 3000mAh capacity. If you want the biggest battery you can possibly squeeze into your replica, this is probably it!

A folding fore grip lovingly designed by NUPROL which fits onto 20mm RIS / RAS Rails to provide another manipulation point on a weapon which can be folded away when not in use.

An absolutely massive 11.1v 2000mAh Li-Ion battery in a stick configuration, which allows you to squeeze as much lifespan out of your Airsoft Electric Gun as possible, by offering a lower cost and higher power density vs. LiPo batteries.

An absolutely massive 11.1v 2000mAh Li-Ion battery in a stick configuration, which allows you to squeeze as much lifespan out of your Airsoft Electric Gun as possible, by offering a lower cost and higher power density vs. LiPo batteries.

A crane stock Lithium Polymer (LiPo) type battery, which allows for the best possible power to size ratio and charge life available in a compact battery.

This Magazine is designed for M4 / M16 / AR platform Airsoft Electric Guns, and holds a total of 130rnds. Being a Mid-Cap Magazine it will feed until empty and doesn't have the rattle of High Capacity Magazines, but needs a Speedloader to be filled. It has textured externals to improve grip, as well as faux capacity counters for extra realism.

Be safe while charging your Airsoft batteries! If it goes wrong, it really goes wrong. The NUPROL LiPo Safe Charging Bag - 3.8L is designed to store LiPo batteries and other Lithium batteries plus their charger during the charging process, reducing the chances of damage in the event of a LiPo / Battery fire. Better to be safe than sorry!

This charging bag is the perfect size to hold a charger and a battery when charging or to store all your spare batteries when they're not in use.