Viewing 50 of 50.
15.49
  • 7.4v 2S LiPo
  • 25c Rating
  • 1300mAh



A compact LiPo battery designed for crane stock use but also suitable for compact Airsoft hand guards  and comes fitted with Deans connectors instead of the standard Tamiya for upgraded Airsoft Guns.

17.49
  • 1300mAh
  • 11.1v 3S LiPo
  • Crane Battery

A super thin, triple cell crane stock styled 11.1v LiPo battery, featuring a small Tamiya connector for easy use.

15.49
  • 1300mAh
  • 25c Rating
  • 7.4v 2S LiPo

A compact LiPo battery designed for crane stock use but also suitable for compact Airsoft hand guards too, and is designed to give you a high output for fast rate of fire and trigger response for roughly half a day dependent on trigger happiness.

34.99
  • 2000mAh
  • 20c Rating
  • 7.4v 2S LiPo

A compact LiPo battery designed for crane stock use but also suitable for compact Airsoft hand guards too. Fitted with a deans connector for low resistance.

19.99
  • 2600mAh
  • 20c Rating
  • 7.4v 2S LiPo

A LiPo crane stock battery designed to fit in crane and solid stocks, where other batteries would be wasting the available space. 

23.49
  • 2200mAh
  • 15c Rating
  • 7.4v 2S LiPo

A LiPo crane stock battery designed to fit in stocks and small spaces which other large batteries do not fit.

47.00 Pack price
Normally 61.47
Save 14.47
  • Battery, charger & charging bag bundle
  • 7.4V 1450mAh LiPo Battery with Mini-Tamiya connector
  • Ideal for M4/AR-15 AEG Crane stock battery compartments

If you need a battery for your M4/AR-15 AEG buffer tube and would rather get everything you need in one place, here it is! This bundle includes a NUPROL LiPo Balance Charger, a Safe Charging Bag and a 7.4V 1450mAh LiPo Battery in Crane configurations with a Mini-Tamiya connector; an ideal setup for a Mini-Tamiya equipped rear wired M4/AR-15 AEG with a Crane stock battery compartment. 

The dimensions of the included battery are as follows: 11.4cm x 0.7cm x 1.5cm per cell group (2x cell groups on each battery) with approximately 9cm of wiring between the battery and connector. 

34.99
  • 2600mAh
  • 20c Rating
  • 7.4v 2S LiPo

A LiPo crane stock battery designed to fit in crane and solid stocks, where other batteries would be wasting the available space. 

29.49
  • 9.6V NiMH
  • 1600mAh Capacity
  • Mini-Tamiya connector

If you're after a safer alternative to a LiPo power source with no sacrifice in trigger response or rate of fire, the 9.6V 1600mAh NiMH Crane Stock Battery from Big Foot is ideal. An 8-cell NiMH battery pre-wired to a mini-Tamiya battery connector, this battery is configured in two cell groups, known as a "nunchuck" or "crane stock" battery. This allows it to fit into the cheek pieces of the common crane stock and other similar stocks like the Delta Armory Stock and the PTS EPS Stock.

As with any NiMH battery, this battery should only be charged on compatible NiMH chargers and never left attended while on charge. We also recommend charging any battery in a Battery Safe Charging Bag just in case. Being a 1600mAh battery, this should power almost any mini-Tamiya connector-equipped AEG for several hours of intense gameplay, though if you're out in the field all day, we recommend grabbing a second to stay in the fight for longer!

47.00 Pack price
Normally 61.47
Save 14.47
  • Battery, charger & charging bag bundle
  • 7.4V 1450mAh Crane LiPo Battery with Deans connector
  • Ideal for M4/AR-15 AEG Crane Stock battery compartments

If you need a battery for your M4/AR-15 AEG Crane stock and would rather get everything you need in one place, here it is! This bundle includes a NUPROL LiPo Balance Charger, a Safe Charging Bag and a 7.4V 1450mAh LiPo Battery in Crane configuration with a Deans connector; an ideal setup for a Deans equipped rear wired M4/AR-15 AEG with a Crane stock battery compartment. 

The dimensions of the included battery are as follows: 11.4cm x 0.7cm x 1.5cm per cell group (2 cell groups on each battery) with approximately 9cm of wiring between the battery and connector. 

17.49
  • 7.4v 2S LiPo
  • 1000mAh 25C
  • Crane Stock Battery

An ultra thin, long LiPo crane stock battery. The battery is designed to fit into as little space as possible, taking up very little room allowing it to be fit into stocks and small battery compartments.

29.49
  • 3000mAh
  • 7.4v 2S LiPo
  • Crane Battery

A crane stock Lithium Polymer (LiPo) type battery, which allows for the best possible power to size ratio and charge life available in a compact battery.

54.00 Pack price
Normally 68.47
Save 14.47
  • Matched Ni-Mh Bundle
  • Charger & Battery
  • Fire Safe Bag

This Airsoft Battery and Charger pack features a NUPROL 9.6v 1600mAh Ni-Mh Crane Battery, NUPROL NPC-01 NiMh Battery Charger, and Safe Charging Bag which are perfectly matched to work with each other, a great choice for anyone new to Airsoft and looking for a battery for their gun. 

If your Airsoft gun comes with a sample 9.6v Block or Crane style battery and charger then this is one of the first things you should buy. The battery will last longer, charge better, and will be of much higher quality than the free gift battery included for testing in some Airsoft gun boxes!

44.49
  • 3300mAh
  • 7.4v 2S LiPo
  • Crane Battery

A humungous 7.4v LiPo battery in a Crane Stock / Nunchuck configuration which offers a massive 3000mAh capacity. If you want the biggest battery you can possibly squeeze into your replica, this is probably it!

22.49
  • 1300mAh
  • 11.1v 3S LiPo
  • Crane Battery

A super thin triple crane stock 11.1v 1300mAh 25C LiPo that features a standard Tamiya connector and is made up of three individual thin cells, making it great for squeezing into awkward spaces.

46.50 Pack price
Normally 56.47
Save 9.97
  • Battery, charger & charging bag bundle
  • 7.4V 1300mAh LiPo Battery with Mini-Tamiya connector
  • Ideal for use with several different platforms 

If you need an Airsoft battery that fits in almost anything and would rather get everything you need in one place, here it is! This bundle includes a NUPROL LiPo/ LiFe/NiMH Balance Charger, a Safe Charging Bag and an ASG 7.4V 1300mAh LiPo Battery in Crane configuration with a Mini-Tamiya connector; an ideal setup for Mini-Tamiya equipped AEGs and capable of fitting inside Crane stocks, fixed stocks and most handguards! If you have multiple different AEGs and you want a battery to fit them all, chances are this one will! 

The dimensions of the included battery are as follows: 10.1cm x 0.7cm x 2cm per cell group (2x cell groups on each battery) with approximately 10cm of wiring between the battery and connector. 

Compatible with: M4/AR-15 Crane Stock, M4/AR-15, SMG-5 & AK Fixed stock, AR-36 & SMG-5 handguards, Tokyo Marui SCAR-L/H NGRS stock, most M4/AR-15 buffer tubes. 

40.99
  • 11.1V 3S LiPo
  • Deans/T-Plug connector
  • 1500mAh Capacity

If you're running an upgraded or MOSFET-equipped AEG, this Gens Ace 11.1v 25C 1500mAh LiPo Battery may be just what you need to power it. This Lithium Polymer (LiPo) battery is pre-wired to a Deans/T-Plug battery connector and consists of 3 cell groups wired in nun-chuck/crane/butterfly configuration. The wire length between the cells and connector is approximately 8cm and each of the 3 cells measures approximately 0.8 x 1.6 x 13 cm. 

Not all Airsoft AEGs are capable of running an 11.1V LiPo without causing damage, if you are unsure check the recommended battery section of the your gun's product description. LiPo batteries require balance charging, meaning this battery MUST be charged using a LiPo balance charger with the balance port connected. We recommend using a battery charging bag for storage and charging, and to never leave an Airsoft battery on charge while unattended. 

52.49
  • Special TM Design
  • Unique Connector
  • For Marui SOPMOD

A replacement battery for Tokyo Marui SOPMOD 6mm BB guns which use the Unique Fixed Crane Stock Style Battery Design. 

26.99
  • 2200mAh
  • Crane Battery
  • 11.1v 15C LiPo

An Airsoft Gun Battery designed and built by NUPROL specifically for Airsoft Skirmishers and are part of their POWER range of Batteries.

22.49
  • 9.6v Charge
  • 1600mAh capacity
  • Perfect for M4 crane stocks

Proven in battle, everyone has use for Ni-Mh crane stock batteries! The advantage of NiMh batteries over their LiPo batteries is that they are less volatile and don't require balance so you can use any charger as long as it's NiMh compatible, just make sure to not leave the battery charging unattended.

This battery has a voltage of 9.6v and a capacity of 1600mAh and is comprised of 8 cells working in unison, connected via the Deans/T-Plug connector.

This Ni-Mh sports a crane configuration, one of the most common types and is perfect for split battery compartments, most often seen in M4 stocks, M16, SMG-5 and AKs with full stocks. The battery measures 12x1.8x1.8cm per 4x cells and has a wire length of roughly 8cm.

About Our All Airsoft Batteries

Airsoft 6mm BB Gun AEG Battery

Explore Patrol Base’s massive range of airsoft batteries online, designed to suit almost every type of airsoft 6mm BB gun. They even work great with RC cars too!

We supply a wide variety of battery types, ranging from Li-Po batteries to Ni-Mh batteries as well as Li-Fe, CR123A to Button Batteries and AA / AAA Types. If you’re looking to stock up on battery supplies for your airsoft accessories, such as torches, explore our selection of accessory batteries.

Our batteries have a wide range of applications, from actual AEG gun batteries to batteries for accessories, and can be used in toy planes, cars, and other electronic projects. Plus, we only stock the best batteries available, from well-known brands like VP Racing, Giant Power and Vapex.

Having trouble finding the right battery? Measure the amount of space available, then use the filters on the left of the page to find all the batteries that will fit. We also have a great airsoft battery buying guide that offers even more information.

Shop airsoft batteries online today and enjoy 1-2 working day delivery. Alternatively, come check them out in person at our Huddersfield store.