Airsoft Magazines

This high capacity magazine is designed for SMG-5 AEGs and holds a whopping 570rnds, much more than any other SMG-5 magazines. It is filled from the top of either magazine by pulling back the mock bullets or opening the fill window, and wound from the bottom clockwork wheel to feed BBs.

Having more magazines in your loadout means more opportunities to get kills! The NUPROL W-Mag is the latest in NUPROL's line of AEG mid-capacity magazines, sporting a high-density polymer shell, a steel feed spring and a rubber baseplate which both protects the internals of the magazine in the event that it is dropped, and allows the magazine to be used as an improvised shooting support using a technique known as "mag-podding".  This magazine is a spring-loaded design and can be filled using a standard Airsoft speed loader through the fill/feed port at the top of the magazine.

Looking for a unqiue modern mag for your M4? The NUPROL 380rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms and has an ultra-modern look thanks to its hex pattern texture. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look! 

Looking for a unqiue modern mag for your M4? The NUPROL 380rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms and has an ultra-modern look thanks to its hex pattern texture. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look! 

If you are running a MAC-11 GBB that unbelievable rate of fire will have you needing plenty of spare mags, so stock up while they're hot! The HG-203 MAC-11 Green Gas Magazine from HFC holds 42 BBs, all of which will be gone in a couple of seconds on full auto! The magazine can be loaded through the feed lips by pulling the follower down to the bottom, where it will lock into place. You can load this mag either by hand or by using an Airsoft speed loader. Once you are finished loading, press the small protruding tab on the follower to release it and reapply tension to the feed spring. The fill valve is located on the bottom of the magazine and can be filled with summer gas or green gas. 

If you need magazines for your STEN or MP40 AEG, these will do the trick! The AGM 120rnd Mid-Cap Magazine is compatible with AGM's STEN gun and MP40 AEGs, holding 120 BBs with no battle rattle thanks to its spring-loaded design. The external shell of the magazine is constructed from steel for an authentic feel and has reinforcement ribs on either side, matching the real thing perfectly.

This magazine is a mid-cap, meaning it holds a respectable 120 rounds and is ideal for those who hate the "battle rattle" of high-caps but want a higher capacity. To load the mag, simply fill it through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading rod.

If you are looking for short M4/AR15 Airsoft magazines, whether it is for a Vietnam War re-enactment or you just want to get nice and low with your DMR to make good use of cover, NUPROL has the answer. This 110rnd Mid-cap magazine is constructed with a steel shell and polymer internals with a steel feed spring and is super short and easy to carry plenty of.

This magazine is patterned after the real world 20-round M16 magazine issued during the early Vietnam war which also found use in SPR and DMR rifles in the much more recent Iraq and Afghanistan conflicts. This magazine is a spring-loaded mid-cap and is loaded using a speed loader or loading rod/tool through the fill/feed port at the top of the magazine body.

If you are looking for short M4/AR15 Airsoft magazines, whether it is for a Vietnam War re-enactment or you just want to get nice and low with your DMR to make good use of cover, NUPROL has the answer. This 110rnd Mid-cap magazine is constructed with a steel shell and polymer internals with a steel feed spring and is super short and easy to carry plenty of.

This magazine is patterned after the real world 20-round M16 magazine issued during the early Vietnam war which also found use in SPR and DMR rifles in the much more recent Iraq and Afghanistan conflicts. This magazine is a spring-loaded mid-cap and is loaded using a speed loader or loading rod/tool through the fill/feed port at the top of the magazine body.

A recent magazine design that is optimized for the 416 style receiver, the NUPROL LS-Mag EXT Hi-Cap Magazine 450rnd is fully compatible with SCAR-L and M4/AR15 AEG replicas. The magazine holds 450 rounds and is filled via the top fill window. The magazine is constructed from high-density polymer with a steel feed spring, keeping the weight low but providing decent drop and scratch resistance.

The magazine design features strengthening ribs across its surfaces which also double as an area to grip when shooting your AEG in an unconventional stance. On the right side of the magazine body we can find markings indicating "30" next to a bullet symbol, and "Cal. 5.56x45" indicating the calibre of cartridge this style of magazine holds in the real firearm equivalent.

If you need more capacity, but don't want the rattle from carrying high capacity mags, this is what you'll need. With a respectable 200 round capacity, this magazine holds more than comparable mid-caps without being significantly larger than a standard M4/AR15 magazine, allowing it to fit into standard M4/AR15 mag pouches easily.

A recent magazine design that is optimized for the 416 style receiver, the NUPROL LS-Mag EXT Hi-Cap Magazine 450rnd is fully compatible with SCAR-L and M4/AR15 AEG replicas. The magazine holds 450 rounds and is filled via the top fill window. The magazine is constructed from high-density polymer with a steel feed spring, keeping the weight low but providing decent drop and scratch resistance.

The magazine design features strengthening ribs across its surfaces which also double as an area to grip when shooting your AEG in an unconventional stance. On the right side of the magazine body we can find markings indicating "30" next to a bullet symbol, and "Cal. 5.56x45" indicating the calibre of cartridge this style of magazine holds in the real firearm equivalent.

If you need more capacity, but don't want the rattle from carrying high capacity mags, this is what you'll need. With a respectable 200 round capacity, this magazine holds more than comparable mid-caps without being significantly larger than a standard M4/AR15 magazine, allowing it to fit into standard M4/AR15 mag pouches easily.

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a high cap variant, meaning that it can hold up to a massive 430 rounds. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for super quick reloads to stay in the fight.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a high cap variant, meaning that it can hold up to a massive 430 rounds. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for super quick reloads to stay in the fight.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

If you are rocking a modernised AK AEG these magazines will suit it well! The CYMA 140rnd "Waffle" Mid-Cap Magazine for AK AEG is patterned after real steel Bulgarian AK-47 magazines also sold in the US under the brand "Circle 10". The magazine has waffle texture on the outside to promote positive grip and is constructed from rigid high density polymer, meaning an accidental drop doesn't result in scratches! If you need AK mags for a PMC or modern mercenary loadout, these are perfect!

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss! This magazine is an autowinding design which requires 3x AAA batteries to operate. 

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs. 

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss! This magazine is an autowinding design which requires 3x AAA batteries to operate. 

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs. 

Featuring dot pattern on the side and rubberised buttplate, this is for those of you looking for a more modern M4 hi-cap magazine.

This magazine holds 370 BBs and is loaded through its fill window, located on the top of the magazine body and wound using the wheel at the bottom.

This magazine is constructed from strong polymer with a rubberised baseplate complete with an extension to allow for "mag padding" and a dot matrix so you can mark your magazines for I.D and admin purposes.

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see the internal gear and BBs, letting you know how much blasting you have left.

Featuring dot pattern on the side and rubberised buttplate, this is for those of you looking for a more modern M4 hi-cap magazine.

This magazine holds 370 BBs and is loaded through its fill window, located on the top of the magazine body and wound using the wheel at the bottom.

This magazine is constructed from strong polymer with a rubberised baseplate complete with an extension to allow for "mag padding" and a dot matrix so you can mark your magazines for I.D and admin purposes.

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see the internal gear and BBs, letting you know how much blasting you have left.

The PTS EPM-G Magazine is designed for use in airsoft AR36 replica's & is compatible with Tokyo Marui, Jing Gong, Classic Army, SRC, Umarex, Echo1 & other AR36 platforms alike. 

Looking for polymer high-cap magazines for your 416 or SCAR-L? Shopping for polymer mags can be tricky with these platforms, but the NUPROL 380rnd LS-Mag High-Cap magazine fills the void! This magazine is designed to fit and feed in both M4/AR15 and 416/SCAR-L AEGs, saving the trial and error and guesswork if you own one of the latter two platforms.

This magazine is constructed from strong polymer and features ribs on its external surfaces for reinforcement and to provide extra grip when reloading under pressure or in poor weather conditions. On the right side of the mag, we are treated to recessed markings, reading "Cal.5.56mmx45" and "30" with a bullet symbol above. This magazine is loaded through the fill window at the top of the magazine and is tensioned via the winding wheel on the baseplate.

Looking for polymer high-cap magazines for your 416 or SCAR-L? Shopping for polymer mags can be tricky with these platforms, but the NUPROL 380rnd LS-Mag High-Cap magazine fills the void! This magazine is designed to fit and feed in both M4/AR15 and 416/SCAR-L AEGs, saving the trial and error and guesswork if you own one of the latter two platforms.

This magazine is constructed from strong polymer and features ribs on its external surfaces for reinforcement and to provide extra grip when reloading under pressure or in poor weather conditions. On the right side of the mag, we are treated to recessed markings, reading "Cal.5.56mmx45" and "30" with a bullet symbol above. This magazine is loaded through the fill window at the top of the magazine and is tensioned via the winding wheel on the baseplate.

If you're planning to grab the KRYTAC Vector when it drops, this is the cheapest way to fill your rig! This three-pack of low-capacity green gas magazines is designed exclusively for the Airsoft KRYTAC KRISS® Vector GBB, created by KRYTAC and officially licensed by KRISS®.

Are you the type of player that seeks every advantage to keep the enemy team subdued whilst skirmishing? Having fire superiority is one of the best ways to make the most of an SMG and an aggressive play style. The NUPROL 1200rnd Electric drum magazine is a superb addition to any SMG-5 loadout and can be an asset in gaining the volume of fire advantage when skirmishing, and can turn the SMG-5 into a highly mobile and manoeuvrable support weapon, able to keep pace with the assaulter and provide supporting fire for the team. This drum magazine is constructed from high-density polymer with a modern design aesthetic, fitting in perfectly with the SMG-5 styling, especially if it is railed up! This magazine is an autowinding design with a sound control function, which requires 3x AAA batteries to operate. 

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

A medium capacity polymer magazine for AK series, both 47 and 74 for a range of manufacturer AK's including G&G, CYMA and more. All part of the  NUPROL Essential range of magazines.

Introducing the Lightweight Green Gas Magazine from Action Army, a 50 round extended magazine for the much-lauded Action Army AAP-01 pistol and TM compatible EU series pistols. This magazine looks like something we have seen before, but at around half the weight! If you want an extended magazine but you don't want to ruin the balance of your pistol, this would be what you need!

Looking for polymer mid-cap magazines for your 416 or SCAR-L? Shopping for polymer mags can be tricky with these platforms, but the NUPROL 150rnd LS-Mag Mid-Cap magazine fills the void! This magazine is designed to fit and feed in both M4/AR15 and 416/SCAR-L AEGs, saving the trial and error and guesswork if you own one of the latter two platforms.

This magazine is constructed from strong polymer and features ribs on its external surfaces for reinforcement and to provide extra grip when reloading under pressure or in poor weather conditions. On the right side of the mag, we are treated to recessed markings, reading "Cal.5.56mmx45" and "30" with a bullet symbol above. This magazine is loaded through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading rod.

If you want more ammo on your AK but drum mags aren't your thing, this mag very well might be! The CYMA 1100rnd Electric High-Cap Dual Magazine for AK47/74 AEG is styled after a pair of real steel 7.62 x 39mm magazines clamped together with a mag coupler, complete with detailed dummy cartridges for a more realistic look. This magazine should be compatible with any AK47/74 AEG rifle but is ideal for 7.62 x 39mm chambered AK replicas such as the original AK-47, AKM and AK-103, to name but a few!

This magazine holds an incredible 1100 BBs and can be wound up in 3 different ways; using the winding button, the manual winding wheel just like any other high-cap, or via the sound control function which will wind the magazine as it detects you shooting. 

Filling the mag can be done through the fill window on the top of the mag body and the manual winding wheel is on the baseplate, as it is in most high-cap mags. The button which controls the auto-winding/sound control function can be found on the left side of the dummy magazine, and if you want to wind the mag using the winding wheel make sure you have this switch in the central (off) position. To power the magazine you will need 3 x AAA cells (not included) but if you don't have any lying about the night before the skirmish you can always use the winding wheel and stay in the fight with a whopping 1100 rounds at your disposal!

If you're looking to load up in one go with a full complement of high quality mid-caps, EMG's Daniel Defense Mid-Cap mags are some of the best out there. These magazines are styled after the real 32rnd DD M4 Magazines, complete with an increased capacity of 230 BBs and a high-vis yellow fill/feed port to mimic the high-vis follower of the real thing, and to ensure you don't insert the mag backwards!

These magazines are designed to be compatible with high-speed builds, so if your AEG demands a high quality magazine to keep up with its appetite, these will do the trick. Just like any other Airsoft mid-cap, loading these mags is done through the fill/feed port on the top of the magazine with an Airsoft speed loader or loading tool. These magazines are designed for the M4/AR-15 AEG platform but have also been designed with universal compatibility in mind, so they should also fit most SCAR-L, 416, L85 and other AEGs with M4 mag compatibility. 

As a bonus, the DD mag design sports a grippy texture on the sides, the front and the rear to assist in wet weather operations and a loop on the baseplate for "mag-podding" or attaching a paracord pull assist. With official licencing, high quality build, massive capacity for a mid-cap and no battle rattle to give you away, these magazines will see you well equipped to face down with high-cap users while nearly doubling the capacity of your usual 130rnd mid-cap!

You shouldn't need to reload often when sniping, unless you are a bad shot! Regardless of this, it's always wise to have a spare mag on hand for extended skirmishes rather than panic under fire trying to load BBs as the enemies BBs shower down upon you! Introducing CYMA's spare magazine for the CM.702 M24 rifle. This magazine is constructed from polymer and holds 28 rounds. The magazine can be loaded either by hand or with a speed loader.