All External Airsoft Parts & Attachments

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to Picatinny rail systems, locking with a grub screw on the top. These are much like standard rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to Picatinny rail systems, locking with a grub screw on the top. These are much like standard rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

A 20mm RIS compatible scope mount ring, designed to enable users to mount VORTEX's high quality optics onto their Airsoft guns or real firearms.

If you want to add a western red dot sight or scope to your AK platform this adapter will do it! The M-ETAL 20mm Picatinny Railed Scope Mount for AK Side Rail fits AK-style side rails present on most AK-74 and AK-10x style AEG and GBB rifles and provides a 20mm Picatinny rail of approximately 17cm in overall length.

The mount attaches via a QD locking mechanism constructed from steel, meaning you can quickly add and remove your optic to suit the requirements of the mission and even switch between a red dot sight and telescopic sight if you have a mount for each optic. If your AK needs the benefits of western 20mm Picatinny sight options this adapter is a must!

If you are rocking a KAR98k but you want some modern glass, this is a great way to get the job done! The 20mm Picatinny rail mount from Double Bell is designed to fit to their KAR98K sniper rifle and provide a 20mm rail above the receiver, allowing you to mount modern optical sights. The rail mounts into the rear sight mounting apparatus and provides you with 17 slots of 20mm rail, plenty to mount whatever you like. We advise against adding a PEQ, flashlight and T1 but it's your gun and there is enough space, just be ready to run if a reenactor spots you!

If you're looking for an SSP18 slide that features a stylish metallic finish, but still remains lightweight thanks to its aluminium construction, Novritsch has you covered. The Novritsch SSP18 CNC Slide is a superb way to make your Novritsch SSP18 stand out on the battlefield and turn heads with a flashy design!

The CNC top and side cuts help reduce weight, resulting in faster cycling speed, and give your pistol an ultra-modern look. Customisation is the name of the game with this slide, which allows you to craft an SSP18 unique to you, so your opponents will always remember who sent them back to the safe zone.

Modern Airsofters are always looking for a lightweight slide to improve on those all-important cycling speeds, but if you aren't willing to compromise your style with a polymer slide, an aluminium slide is what you want! The SSP18 features an incredibly low weight thanks to its CNC cuts and grooves, which also make your pistol stand out from the rest. The slide transforms your SSP18 from a simple and functional pistol to a custom and unique extension of yourself with forward-thinking and futuristic stylings.

If you're looking for an SSP18 slide that features a stylish metallic finish, but still remains lightweight thanks to its aluminium construction, Novritsch has you covered. The Novritsch SSP18 CNC Slide is a superb way to make your Novritsch SSP18 stand out on the battlefield and turn heads with a flashy design!

The CNC top and side cuts help reduce weight, resulting in faster cycling speed, and give your pistol an ultra-modern look. Customisation is the name of the game with this slide, which allows you to craft an SSP18 unique to you, so your opponents will always remember who sent them back to the safe zone.

Modern Airsofters are always looking for a lightweight slide to improve on those all-important cycling speeds, but if you aren't willing to compromise your style with a polymer slide, an aluminium slide is what you want! The SSP18 features an incredibly low weight thanks to its CNC cuts and grooves, which also make your pistol stand out from the rest. The slide transforms your SSP18 from a simple and functional pistol to a custom and unique extension of yourself with forward-thinking and futuristic stylings.

If you're looking for an SSP18 slide that features a stylish metallic finish, but still remains lightweight thanks to its aluminium construction, Novritsch has you covered. The Novritsch SSP18 CNC Slide is a superb way to make your Novritsch SSP18 stand out on the battlefield and turn heads with a flashy design!

The CNC top and side cuts help reduce weight, resulting in faster cycling speed, and give your pistol an ultra-modern look. Customisation is the name of the game with this slide, which allows you to craft an SSP18 unique to you, so your opponents will always remember who sent them back to the safe zone.

Modern Airsofters are always looking for a lightweight slide to improve on those all-important cycling speeds, but if you aren't willing to compromise your style with a polymer slide, an aluminium slide is what you want! The SSP18 features an incredibly low weight thanks to its CNC cuts and grooves, which also make your pistol stand out from the rest. The slide transforms your SSP18 from a simple and functional pistol to a custom and unique extension of yourself with forward-thinking and futuristic stylings.

If you're looking for an SSP18 slide that features a stylish metallic finish, but still remains lightweight thanks to its aluminium construction, Novritsch has you covered. The Novritsch SSP18 CNC Slide is a superb way to make your Novritsch SSP18 stand out on the battlefield and turn heads with a flashy design!

The CNC top and side cuts help reduce weight, resulting in faster cycling speed, and give your pistol an ultra-modern look. Customisation is the name of the game with this slide, which allows you to craft an SSP18 unique to you, so your opponents will always remember who sent them back to the safe zone.

Modern Airsofters are always looking for a lightweight slide to improve on those all-important cycling speeds, but if you aren't willing to compromise your style with a polymer slide, an aluminium slide is what you want! The SSP18 features an incredibly low weight thanks to its CNC cuts and grooves, which also make your pistol stand out from the rest. The slide transforms your SSP18 from a simple and functional pistol to a custom and unique extension of yourself with forward-thinking and futuristic stylings.

If you're looking for an SSP18 slide that features a stylish metallic finish, but still remains lightweight thanks to its aluminium construction, Novritsch has you covered. The Novritsch SSP18 CNC Slide is a superb way to make your Novritsch SSP18 stand out on the battlefield and turn heads with a flashy design!

The CNC top and side cuts help reduce weight, resulting in faster cycling speed, and give your pistol an ultra-modern look. Customisation is the name of the game with this slide, which allows you to craft an SSP18 unique to you, so your opponents will always remember who sent them back to the safe zone.

Modern Airsofters are always looking for a lightweight slide to improve on those all-important cycling speeds, but if you aren't willing to compromise your style with a polymer slide, an aluminium slide is what you want! The SSP18 features an incredibly low weight thanks to its CNC cuts and grooves, which also make your pistol stand out from the rest. The slide transforms your SSP18 from a simple and functional pistol to a custom and unique extension of yourself with forward-thinking and futuristic stylings.

If you're building out your AK to match the latest real steel builds, the 5KU Lightweight Zco Style Lower Handguard for AK-47/74 is an essential bit of kit. Based on the real steel Zco B30 handguard, this CNC 6061 aluminium lower handguard is designed to fit CYMA, GHK and LCT AK rifles and provides a full length 20mm Picatinny rail at 6 o'clock and a short length at 3 o'clock. 

Additional accessories can be mounted using Zco style rail adapters, and despite being double the length of standard AK handguards, the Lightweight Zco Style Lower Handguard tips the scales at a minuscule 174g, meaning it won't slow you down in-game. If your AK is due for a makeover, give it the modern touch it deserves with the Lightweight Zco Style Lower Handguard for AK-47/74 from 5KU!

If you want to bring your M1928 Thompson AEG up a level in realism, this conversion kit will do it! The  Battleaxe Real Wood Furniture Kit for CM.051 M1928 Thompson comprises a real wood stock, a real wood vertical foregrip/handguard and a real wood pistol grip. 

To fit this conversion kit you will screws and mounts from the original CM.051, the kit only includes the real wood furniture. This kit is designed for the CM.051 Thompson AEG, it may fit other brands but modification will be required. If your CYMA Thompson needs an added dose of authenticity, a real wood kit is the way to go!

This Sight Mount from Vortex Optics is crafted from Aluminium and features a One-Piece design, with the exception of the top of the Mount Rings. It is designed for 30mm Optic Tubes and has a Center Height of 40.39mm / 1.59". The Cantilever design of the Mount makes it especially effective for installing Short Dot-style Optics to a flat-top Receiver such as the AR-15. Being made from Aluminium, it is lightweight and effective, but has been so well made it is covered by Vortex's VIP Lifetime Warranty.

You've heard of the legendary Bifrost tracer unit, but this new Acetech X Lancer Tactical special edition takes the most stylish tracer unit on the market and bumps it up a notch with a gorgeous heat gradation/rainbow effect finish which is sure to draw eyes in game and would be the perfect companion to a loud and proud high rate of fire build.

As with the original Bifrost, this compact Acetech tracer unit offers a plethora of functions including muzzle flash simulation, selectable colours for the LED array, Rainbow and Dynamic Rainbow mode as well as the option to run the unit as a simple tracer unit for when you want to be more discrete and sneaky. The unit mounts to 14mm CCW male threaded barrels but also comes with an 11mm CW to 14mm CCW adapter, meaning it can also be mounted on any pistol with 11mm CW female threads. With all the options under the sun and the ability to keep pace with extremely high rates of fire (up to 35 rounds per second!), this is probably the ultimate Airsoft Tracer unit!

A replacement original selector switch set for the CM.041 SMG-5 Series of AEGs. If your selector switch is a bit worn, no need to put up with it! Replace your old selectors with some fresh ones and have your SMG-5 looking great again!

A new line of M-LOK mounting hardware from ARES! Whatever it is you want on your M-LOK handguard, ARES can help you mount it properly! No adaptor for the kitchen sink yet though, we are waiting ARES...

If you want a more aggressive look for your PTS Sandman suppressor, the PTS Syndicate Dead Air R-Series Flash Hider Front Cap for Sandman Suppressors will give you what you need. This front cap replaces the original cap on any of PTS's Dead Air Sandman suppressors with a fantastic replica of the real steel Dead Air Flash Hider Front Cap. In real steel terms, this reduces muzzle flash signature but in Airsoft terms, it's only for the look!

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This 'Block Hider' fits to your outer barrel, just like standard flash hiders - using a 14mm CCW thread, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This 'Block Hider' fits to your outer barrel, just like standard flash hiders - using a 14mm CCW thread, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This 'Block Hider' fits to your outer barrel, just like standard flash hiders - using a 14mm CCW thread, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

If you are gearing up to spruce up your old AK AEG, or replace your damaged handguard cap, this might be handy! The LCT Front Hand Guard Cap For AK Variants is an original replacement part for the LCT LCK variants. The part is constructed from steel and includes the rotary locking lever for the LCT/VFC/real steel style of AK handguard attachment. This part is intended for the LCT products but should also work with VFC and other AKs, though the part may need modification. This part will not fit an AKS-74U rifle, it is designed for full-size AK handguards only.

It features a sling point on the side, making this cap an ideal way to sling your AK platform whilst out on the battlefield. If you're looking for a replacement cap for your Russian rifle, the LCT Front Hand Guard Cap For AK Variants is just what you need!

If you're fed up with missing out on kills while you're busy reloading, the Action Army Mag Carrier Foregrip for 20mm Picatinny Rail should be in your sights! Constructed from high-density polymer with steel screws and nuts, this device functions as a foregrip for 20mm Picatinny rails and also holds a single AAP-01 or EU-series GBB pistol mag; on board the pistol and ready to be slapped in double time!

When installed, your spare magazine is retained by a left/right swappable mag catch, meaning left or right-handed users can set Mag Carrier Foregrip up to suit them perfectly. The set also includes a pair of 20mm Picatinny side rails so you don't have to ditch your tactical flashlight or laser to use this nifty device. Please note, if you're planning to use this with a standard AAP-01 Assassin you'll need the AAP-01 Advanced Pistol Rail Set to mount it and it doesn't quite fit the AAP-01C due to alignment with its built-in rail.

If you're running a primary pistol which takes EU-series mags and is rocking a 20mm Picatinny frame rail, the Action Army Mag Carrier Foregrip for 20mm Picatinny Rail will have you back online after a reload in seconds!

If you're running an SSG10 A3 and want it shooting even better than it already does, the Novritsch SSG10 A3 TDC HOP-up Rail Mount will get you there. This part is a unique design from Novritsch, specifically for the A3 variant of the SSG10 and is not compatible with other variants. 

The set includes a 20mm Picatinny rail mount with a TDC HOP-up dial built in and is supplied with the parts you'll need to install it, other than a drill. Be warned, this set requires precision to install and if done wrong, can be catastrophic. As such, we only recommend this to Airsofters experienced with tech work and handy with an electric drill. 

The advantages of TDC HOP-ups are numerous, including providing a stronger HOP-up effect and reducing side-to-side shot deviation. The numerically marked TDC dial also allows you to keep track of your HOP-up settings for different BB weights, a fantastic feature for the serious sniper. The integral 20mm Picatinny rail also allows PEQ lasers, RunCam or Novritsch ClipCam Cheater-Catcher action cameras to be installed in the optimal position. If you want to up the performance of your SSG10 A3 to the maximum, the Novritsch SSG10 A3 TDC HOP-up Rail Mount is what you need!

This one's for all you AK lovers looking to treat your rifle to a new receiver and stock. Constructed entirely from durable steel, this will undoubtedly give you AK a nice sturdy feel with a good weight balance. The stock itself is skeletonised to keep the weight balance and to allow it to fold into the receiver and lock in place with a latch.

The receiver has all the hallmarks of a classic AK body, with its signature level style mag release and angular trigger guard and is even complete with the iconic AK dovetail side mount, to which you can attach the tactical accessories of your choice.

Whether your looking to spruce up your AK47 with a new receiver and folding stock, or fancy creating some Frankenstein's monster of a rifle by attaching this to a non Russian rifle (we won't judge), this solid piece of gear is a great buy at the price.

If you want that classic look for your AKMSU or maybe your Airsoft replica needs an external repair, Battleaxe has the perfect kit for you! The Battleaxe Wooden Conversion For AKMSU is designed to fit most AKMSUs, however, modification may be required. The set includes a real wood upper handguard, lower handguard and pistol grip beautifully finished to mimic the real thing.

The attention to detail paid by Battleaxe in this kit is evident when you notice the super-realistic laminated plywood construction, just like real Russian AK wood. While this wood may not be as strong as the real Russian stuff, it's ample for Airsoft use and looks far better than cheaper alternatives. Whether your objective is to build a seriously unique AK or complete your RPK support gun build, this Wood Conversion Kit is a fantastic option

If your primary weapon is boasting a 1913/20mm Picatinny stock setup you now have some fresh new stock options thanks to 5KU! The 1913/20mm Picatinny Folding Visor/Respirator Stock is designed to mount to any 20mm Picatinny rail, primarily those found on MPX and MCX rifles, and other AEG/GBB primaries with 1913/20mm Picatinny stock mounting apparatus. Feel free to mount it to any rail on your AEG, but don't blame us for the funny looks!

The stock body is constructed from aluminium to keep the weight low, and the butt plate is rubber with linear texture to promote positive grip, with or without body armour. The folding/mounting mechanism is constructed from steel to provide the strength needed, and the QD sockets on either side of the stock are also steel, and fully functional. The Visor/Respirator stock is designed specifically to provide perfect sight alignment when wearing bulky face gear, allowing you to see down your optic without requiring a riser and increasing height over bore.

If your M4/AR-15 AEG needs a high-end makeover, the EMG Daniel Defense DD4™ RIII™ Metal Receiver for M4/AR-15 AEG is what it needs! Styled to match the receiver of the latest real steel Daniel Defence DD4™ RIII™ rifles, this receiver is made from flawlessly machined aluminium with an anodised surface finish to guarantee it maintains its good looks in the long term!

The set includes the upper receiver, lower receiver, front and rear body pins, an ambidextrous Grip-N-Rip® charging handle with mock bolt and a Daniel Defense marked polymer dust cover, completing the elite DD look. The upper receiver features DD4™ RIII™ markings prominently engraved and the right side of the magazine well includes realistic Daniel Defense roll marks, just like the real thing. As we might expect, the upper receiver also includes a 20mm Picatinny rail, ready for your choice of optical sight. 

This receiver is designed to fit M4/AR-15 AEGs and should fit most standard non-ambidextrous version 2 gearbox internals, making it the ideal way to style up your boring M4! The rear includes the standard AEG buffer tube mounting lug and the front features standard receiver threading; compatible with a wide range of barrel nuts and handguards so you can get the look you need. Whether you've got a polymer M4 that needs a realism boost or you want a bit of that in-vogue DD flair for your platform without buying a new gun, the EMG Daniel Defense DD4™ RIII™ Metal Receiver for M4/AR-15 AEG is a slick piece of kit!

If you're running a KSG shotgun and need the enemy team to taste the rainbow, the Acetech Quark K Shotgun Tracer Unit for KSG is how you do it! An innovative combination of the Acetech Quark tracer unit with an integrated flashlight and a design which perfectly matches the unique Keltec aesthetic, the Quark makes the KSG an even more devastating foe in close encounters!

The integrated flashlight can be activated manually or using the built-in gyroscopic motion sensors, turning the flashlight on when the shotgun is levelled and off again when elevated or lowered. Strobe mode is also an option, allowing you to dazzle the enemy as you breach a room and conceal your position in an intense CQB scenario.

Like the legendary Acetech Bifrost Tracer, the Quark K offers a vast range of colour mode options, the ability to light up both Red and Green tracer BBs and a rainbow muzzle flash mode so bright it will even light up standard BBs for the first meter or so of their journey downrange. Power is supplied by an internal rechargable Li-ion battery which is charged via the included USB Type-C cable, keeping this beastly device cost-effective and convenient.

A device which makes the KSG look even more badass than it did without it packing functionality other platforms can only dream of, the Acetech Quark K Shotgun Tracer Unit for KSG is incredibly versatile and equally effective in game!

The Novritsch SSG10 A2 Stock will completely transform your SSG10 or VSR 10 sniper rifle. The stock and chassis have plentiful features that will elevate your gameplay both in terms of ergonomics and aesthetics. It fits the SSG10 A1 receiver without and adjustments need to be made. It also fits other VSR-10 platforms but requires you to remove the hop-up block plate from your VSR-10 rifle first before installing the stock.

You will need to manually install this part, only those who are absolutely confident in their abilities should attempt to install this stock. 

Uplift your sniper rifle and give it a realistic and comfortable feel with this SSG10 A2 Stock, being a sneaky sniper has never been more appealing!

A set of three faceplates for the Kublai Magwell Grip to give you a choice of edgy aesthetics to suit your mood for the day.