S&T Airsoft

If you need capacity for your S&T PPSh-41 AEG but don't like drum mags, get yourself a few of these! The S&T 540rnd High-cap Stick Magazine for PPSh-41 AEG is constructed from steel with polymer internals, holding 540 BBs loaded through the fill window on the top of the mag body.

This mag is only compatible with the S&T PPSh-41 and will not fit the Snow Wolf version.

If you're looking for a cheap HOP-up upgrade with no performance compromise, the S&T ZCI Rotary HOP-Up Unit for M4/AR-15 AEGs is ideal! Widely respected by techs, this polymer rotary HOP-up chamber is made by ZCI Leopard, boasting wide compatibility and tight tolerances, producing superb results with a wide variety of AEG HOP-up bucking and nub combinations.

The set includes everything you need to assemble the HOP-up unit, other than the inner barrel, packaged with a silicone HOP-up bucking designed and a standard cylindrical nub ideal for medium power replicas (350 FPS and up). If you're all about cost-effective upgrades, the S&T ZCI Rotary HOP-Up Unit for M4/AR-15 AEGs belongs in your parts stash!

If you like the Cold War AK aesthetic, you'll love the S&T AKS-74N Sports Line! Patterned after the real steel AKS-74N, the folding stock AK-74 issued to paratroopers and mechanised infantry with a Russian AK side optics rail, the S&T AKS-74N is constructed primarily from high-density polymer with alloy and steel parts, keeping weight low and agility high.

Inside, we are treated to a 6.02mm tightbore inner barrel, quick change spring system and 18:1 steel gears running on 8mm slide bearing bushings, giving you a head start over other cost-effective AEGs when it comes to internals and performance. Whether you are working on a Soviet-Afghan War loadout or you want a lightweight AK for your rebel/OPFOR kit, the S&T AKS-74N will keep you light on your feet and get the job done down range!

Upgrade your Lee Enfield with a superior cylinder. Tough and durable, the cylinder is specifically for the Lee Enfield S.M.L.E No. 1 MK III, with the cylinder set constructed from stainless steel and Teflon coated, to reduce piston friction. As a result the set can work with high-power springs. 

Looking for something a bit different? This certainly is. The S&T ST870 shotgun is full metal with real wood furniture and it shoots nice and hot, it would make an incredible competition shotgun, with excellent accuracy despite the lack of any form of sights! If you're good enough, your primary becomes an extension of your body, and sights become merely a hindrance...

If your AK AEG needs a revamp, the S&T Complete V3 Gearbox w/ Micro Switch for AK AEGs is the easiest way to give it a new lease of life. This is a complete version 3 gearbox fitted with an AK nozzle, selector plate and top cover retention latch, though if you run an AR36, SG55x or SMG-5K you can swap these parts out for your original bits and use this gearbox in your replicas too. 

Inside, we have an impressive set of internal parts including 18:1 CNC steel gears, 8mm bushings, a steel quick change spring guide, a polymer piston with a full steel tooth rack, a CNC steel cylinder and CNC aluminium piston and cylinder heads. The wiring is low resistance and fitted with a mini-Tamiya connector, wired to suit front-wired and top-wired AK AEGs. The trigger is the "micro-switch" type, improving trigger response and longevity when compared to conventional copper trigger contacts. 

Complete gearboxes are the easiest way to fix gearbox issues for those who are less technically confident or those who don't have time to fiddle with the internal parts of their pride and joy. Whether you've got an AK AEG to fix, are working on a custom build or want a gearbox to learn the technical aspects of the hobby, the S&T Complete V3 Gearbox w/ Micro Switch for AK AEGs is a fine choice!

If you like AKs but don't like their weight, the S&T AK-74N Sports Line AEG is the AK for you! This AK-74N replica is constructed from high-density polymer with choice alloy and steel parts to add strength where needed. This means, despite being an AK replica this beast tips the scales at a mere 2.3kg, giving it agile handling ideal for aggressive skirmishers or younger players with less physical strength.

Inside, we are treated to some thoughtful pre-upgraded parts, even in this cost-effective"Sports Line" AEG. The inner barrel is a 6.02mm tightbore example, offering improved accuracy and a slight raise in FPS from air seal improvements. The gearbox is version 3, with an alloy shell and steel 18:1 ratio gears running on 8mm steel slide bearings, meaning a smooth gearbox report with compatibility with common upgrade parts for those who want more. If you like the idea of a featherweight AK and are into the Cold War aesthetic, this is the AK to go for!

If an Airsoft sniper rifle will be your next buy but you want something that stands out in the safe zone yet blends in in the field, the S&T SV-98 Bolt Action Sniper Rifle; Real Wood is a great choice. This full metal spring-powered bolt action sniper rifle replicates the real steel SV-98, the standard sniper rifle of the Armed Forces of the Russian Federation.

While the S&T SV-98 uses the quite frankly superior L96 receiver design, the muzzle device, detachable steel carry handle and super realistic real wood stock finished in green paint like the real thing make it a fantastic balance between practicality and realism. Inside, we are also treated to some generous pre-upgraded parts, including a 6.02mm tightbore inner barrel along with full HOP-up bucking and inner barrel compatibility with prolific VSR/GBB aftermarket replacements.

Whether you're running a full Russian Army loadout with a Leshy suit or you fancy a change from the usual VSR-10 and L96 sniper rifles seen on skirmish sites, the S&T SV-98 Bolt Action Sniper Rifle; Real Wood will suit you perfectly!

Those looking for a lightweight backup weapon with a fully-fledged special forces style look you can't do much better than the ST46 from S&T. This AEG is designed to look similar to a popular real-world platform and the PDW style stock makes it very compact and optimal for close-quarters battles.

The ST46 is constructed from both alloy and polymer, making it a great choice for those with less physical strength or those who are a bit clumsy and may bump, scrape or drop their AEG. A high-density polymer receiver may be less realistic, but it will not show scuff marks as readily as an alloy receiver might thanks to its dyed nature allowing it to maintain its looks far better than a painted or anodised finish.

On the inside the ST46 has an alloy version 2 gearbox with a Rotary HOP-up unit, setting it up to be competitive and upgrade-compatible without overcomplicating things by reinventing the wheel. Its MOSFET protects the internals from any electrical damage and also improves the trigger response. If you need a lightweight solution, either as a primary or a backup, the S&T ST46 Sports Line PDW M4/AR-15 AEG is the perfect rifle for you!

If you're a WW2 reenactor looking for a period-accurate sniper rifle replica, the S&T Type 97 Arisaka Bolt-Action Sniper Rifle gives you one more superb option to consider! This full metal spring bolt action sniper rifle features a real wood stock, authentic arsenal markings, an integral monopod and a beautiful replica of the real steel Type 97 2.5x scope to top it off. On the outside, this Type 97 replica is practically flawless and the ideal piece to finish off your Japanese Imperial Army impression or to compliment your Type 96 LMG!

Internally, we are treated to a 6.03mm tightbore inner barrel, improving accuracy potential and helping you squeeze every last bit of useful FPS from the pre-installed spring. The trigger sear is a 90-degree example, reducing stress to allow for stronger springs to be used, and the HOP-up bucking, inner barrel and mainspring are all VSR-10 compatible; perfect for those who simply must upgrade everything they touch. Whether you have a taste for classic platforms or you're working on a perfect IJA loadout, the Type 97 is the perfect addition to your arsenal!

If you are into WW2 reenactment or a Japanese history buff, then S&T has just the thing for you! The S&T Type 38 Bolt-Action Airsoft Rifle Replica; Real Wood is a near-immaculate replica of the original Type 38 Rifle Carbine that the Japanese used during WW2. The Carbine variant was intended for use by cavalry, engineers and other roles where a full-sized rifle would be a hindrance. It is made from real wood giving it that authentic feel and weight.

S&T's Type 38 replica follows a similar format to the real steel rifle, boasting a beautiful antique finish on its metal components and stunning real wood furniture to make a rifle that belongs in a glass cabinet when it's not out on the skirmish field. If you need a wall hanger, or you're going for a unique look on the battlefield, there is no better way to stand out than with the S&T Type 38 Bolt-Action Airsoft Rifle Replica; Real Wood!