Valentines Day 2021: Cool bits under £50

If you want to get your AEP LiPo charged faster while monitoring battery status this adapter can make it possible! The IPower Charger Adapter For LiPo AEP Batteries is designed to work with compact AEP LiPo batteries like those supplied with the CYMA CM.1xxS series AEPs and allows you to charge and monitor them using a multi-function charger such as the Turnigy Accucell 6.

This adapter will only work with chargers which require both the standard battery lead (Deans, Tamiya etc) and the balance lead to be connected, and will not work with chargers which charge via the balance lead only. If you own a multi-function charger and you run a LiPo powered AEP, this is your lucky day!

If you need somewhere to stash your tactical snacks, valuables or other outsize skirmish equipment, a large utility pouch is what you need! The 8Fields Tactical Large MOLLE Utility Pouch is designed to be attached to MOLLE webbing, as the name implies. The pouch is constructed from 1000D Nylon and is water-resistant thanks to its high stitch density. Snap button MOLLE hooks on the rear provide retention, keeping the pouch securely mounted, and a pair of glove-friendly zips keep the contents secure.

The advantage of glove-friendly zips is that you can still access the contents of the pouch when wearing full-finger gloves thanks to the paracord and polymer zip extension pieces. On the front, we are treated to a female Velcro panel which can be used to add morale or I.D patches to add a custom touch to your gear setup. 

A compact and seriously tough Hard Case that is designed for Mobile Phones, Passports and other small and important items that need to be kept safe from Water, Dust, Extreme Temperature and Crushing. Whether you're sailing the water, backpacking in the outback or working hard on site, this Hard Case is perfect for keeping your most sensitive items safe.

If you are planning a modern SMG-5 build I have great news for you! You can ditch that dowdy old cocking handle and swap it out it with this ACR-esque modern replacement from CYMA. Made from sturdy Alloy and designed in a thoughtful way, featuring a lightening cut to keep weight down and grip surfaces where you need it, unlike the original. The CYMA extended cocking lever gives ergonomic advantages together with looking operator-af. Suits an M-LOK handguard perfectly!

If your dust cover has fallen off and been lost, the CYMA Ejection Port Dust Cover for M4/AR-15 AEG is the solution! This replacement original part is designed for the CYMA CM.097 AEG series but should also fit M4/AR-15 AEGs from other brands. The dust cover is constructed from steel but does not include the long bar/pin needed to mount it to an AR receiver, so make sure you still have yours and you should be set!

A tough and compact Polypropylene Carry Case for .308 (and a wide range of other) ammunition, with a convenient Folding Grab Handle that makes it super easy to transport and store. If you need better management for your ammo or spent cases, then you're in the right place.

A set of Two Scope Rings for 25mm Optics, which easily attach to 20mm RIS/RAS Rail Systems to install your Rifle Scope on an Airsoft Gun. These rings are Low Profile, meaning your Scope will be mounted snugly to your Rail System. Keeping your scope close to your rail is good for seeing exactly where your BBs go after firing them.

Being a two-piece design, and coming included with an Allen Key, they are very easy to install. The scope rings mount to standard 20mm Picatinny rail sections. To attach them to your rifle scope you must use an Allen key to take off the top sections of the rings, then place your scope in and reattach the top sections of the rings. 

Are you always the last person to finish loading your mags? Are you sick and tired of seeing your mates' impatient looks as you frantically prepare yourself for battle? With a crank wound loader, you can load up a mid-cap in mere seconds, and spend your time more efficiently! This adapter allows you to load up AR36 AEG low and midcaps using a crank wound speed loader. The adapter locks into the M4/AR15 magazine interface in the loader and allows you to insert and load an AR36 Airsoft AEG mag!

The Angry Gun QDC 3-Prong Flash Hider matches the design of real steel flash hiders such as the ones found on AUGs. It is constructed from steel making it extremely durable and sure to withstand any skirmish. This muzzle device is designed to work with other Angry Gun QDC attachments such as their suppressor and tracer unit. These products interlock seamlessly guaranteeing a reliable attachment every time.

This flash hider mounts to 14mm CCW threading, commonly found on most Airsoft assault rifles. It also has a grub screw so you can ensure it is securely attached to your replica with no worries about it coming off. The flash hider also comes with a stainless steel shim, to make sure that it is situated perfectly on your rifle's outer barrel.

If you want a super realistic flash hider that is compatible with Angry Gun QDC suppressors and tracers, this is the one for you! Its steel construction and real steel design certify that this flash hider is perfect for any skirmisher seeking a realistic loadout.

If you own an Eshooter FLARE M Tracer Unit, M BT or Mono but want to keep your platform's front end looking realistic, this is the suppressor for you! The Eshooter Sound Suppressor/Tracer Housing for Flare M is an alloy suppressor-styled muzzle device. It mounts straight onto a common 14mm CCW and includes an 11mm CW to 14mm CCW thread adapter, so if you have something like a WE and Armourer Works pistols OEM pistol you don't have to source one separately!

To fit your tracer unit in this suppressor, simply untwist either side of the muzzle device, drop your FLARE M in and resecure the part you untwisted. This suppressor will not only keep your tracer unit safe from accidental bumps and scrapes on the battlefield, but it will also conceal the unrealistic style of the tracer unit.

Both styles feature unique, modern styling, and a grippy section of textured alloy so you can have a good grip on the suppressor when securing it to the front of your barrel. If you're looking for a way to keep your tracer unit lowkey on the battlefield, or you want a modern low-profile suppressor device, the Eshooter Sound Suppressor/Tracer Housing for Flare M is perfect for you!

If you own an Eshooter FLARE M Tracer Unit, M BT or Mono but want to keep your platform's front end looking realistic, this is the suppressor for you! The Eshooter Sound Suppressor/Tracer Housing for Flare M is an alloy suppressor-styled muzzle device. It mounts straight onto a common 14mm CCW and includes an 11mm CW to 14mm CCW thread adapter, so if you have something like a WE and Armourer Works pistols OEM pistol you don't have to source one separately!

To fit your tracer unit in this suppressor, simply untwist either side of the muzzle device, drop your FLARE M in and resecure the part you untwisted. This suppressor will not only keep your tracer unit safe from accidental bumps and scrapes on the battlefield, but it will also conceal the unrealistic style of the tracer unit.

Both styles feature unique, modern styling, and a grippy section of textured alloy so you can have a good grip on the suppressor when securing it to the front of your barrel. If you're looking for a way to keep your tracer unit lowkey on the battlefield, or you want a modern low-profile suppressor device, the Eshooter Sound Suppressor/Tracer Housing for Flare M is perfect for you!

If you're looking for a way to make your giant G3 AEG more compact, the Jing Gong Sliding Stock for G3 AEGs will do the trick! Designed to fit Jing Gong and Tokyo Marui G3 AEGs, this stock offers 2 positions of adjustment. The stock can be deployed by pushing the adjustment lever on the bottom towards the left, after which it can be pulled out and into place.

The stock base and butt plate are constructed from high density polymer and the stock bars are alloy, keeping weight to a minimum and providing strength where needed. The butt plate boasts deep serrations for optimal grip in any weather conditions and the stock base includes a sling loop for conventional strap slings. Whether you're working on a G3A4 build or you want to fit your G3 into a smaller gun bag, the Jing Gong Sliding Stock for G3 AEGs is ideal!

A full colour rubberized patch depicting the Italian national flag with a Velcro backing, allowing it to be attached to your Airsofting kit, from clothing to tactical rigs and bags.

Patches are a great way to make your Airsoft kit unique, whether it goes on a rig, a helmet, or a backpack! The 8Fields Tactical Polska PVC patch is a velcro backed 3D PVC patch depicting the Polish national flag in subdued colours and is suitable for placement on any Velcro panel, whether it's on clothing, a chest rig, a bag or anywhere else! The patch measures 5.5x3.7 approximately, meaning you can likely squeeze it in on all but the smallest Velcro panels.

A replacement Alloy butt plate for CYMA branded AK series replicas.

If you are using a buckle up "micro-rig", or a more modern plate carrier with a velcro lined kangaroo style pouch, being able to attach pouches without increasing the bulk of your rig is a major benefit. This Double AR-10/SR25/7.62 Magazine insert is designed to slip inside a velcro lined pouch, whether it is on the front of a plate carrier or on a chest rig, and hold 2x 7.62 STANAG sized magazines (SR25, M14, SCAR-H). The pouch is constructed from 1000D Polyester and includes male velcro on one side and female velcro on the other, with elastic loops at the bottom to hold the magazines in.

Simple but effective, this an ultra compact and MOLLE compatible solution to Airsoft pistol magazine storage. Holding up to 2 magazines with elasticated retention pockets to keep your mags secured tight while giving you a slim profile when attached to your rig.

If you need an easy way to avoid blue-on-blue situations in the dark confines of CQB or urban skirmishes, this affordable helmet marker light from FMA should stop your mates from shooting you! This light offers a simple red flash mode which can be activated by pressing the centre of the light and turned off again in the same way.

The backing of the light is constructed from high density polymer to keep it rigid and the front is constructed from transparent rubber. The Helmet Marker Light is designed to be mounted to an Airsoft helmet and comes packaged with a pair of adhesive velcro strips, one female velcro and one male velcro so you can slap it on your lid easily right away!

If you need an easy way to avoid blue-on-blue situations in the dark confines of CQB or urban skirmishes, this affordable helmet marker light from FMA should stop your mates from shooting you! This light offers a simple red flash mode which can be activated by pressing the centre of the light and turned off again in the same way.

The backing of the light is constructed from high density polymer to keep it rigid and the front is constructed from transparent rubber. The Helmet Marker Light is designed to be mounted to an Airsoft helmet and comes packaged with a pair of adhesive velcro strips, one female velcro and one male velcro so you can slap it on your lid easily right away!

A lens protector for EOTech style sights that not only protects your sight from damage, but eliminates tell-tale glare from the lens of your sight - keeping you hidden for longer and giving you the extra edge over your opponents.

These scope rings are designed to hold an Airsoft rifle scope with a tube diameter of 25mm. Scope rings are useful as they allow you to attach your scope to very small sections of Picatinny rail, such as the small sections often found on sniper rifles. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. 

Being a two-piece design they are very easy to install. The scope rings mount to standard 20mm Picatinny rail sections. To attach them to your rifle scope you must use an Allen key to take off the top sections of the rings, then place your scope in and reattach the top sections of the rings. 

If you want to restore the factory fresh look to your workhorse AK, this part may be of use. The Rear Sight Block for the CM.04x Series is an original replacement part for AKM and AK74 rifles of the CM.04x series. This part will not work on AKS-74U AEGs, but should otherwise fit AKs which use the LCT style of construction. The sight block is constructed from alloy and comes with steel pins to mount it, and includes the handguard disassembly lever but does not include the rear sight or the rear sight leaf spring. The surface finish of this part is a rough textured finish which is a close match for the hard-wearing paint applied to Russian AK variants of the 1960s and onwards.

If you're looking for a flashlight mount for your SMR-style handguard, the WADSN SMR Rail Offset Mount for M300/600 Scout Flashlights is ideal. This mount is constructed from CNC aluminium with steel mounting hardware and designed to mount SF Scout (M300 and M600) flashlights to Geissele Super Modular Rail (SMR) style attachment slots.

The mount offers several mounting positions for your Scout Light, allowing for 3 different heights so you can get your accessories perfectly positioned. The mount also allows for mounting with a slight forward extension to defeat "suppressor shadow" or mounting at the rear to keep the light away from your muzzle, depending on how you install your Scout Light. This mount is only for standard SF M300 and M600 Scout Lights and won't fit the Scout Light Pro series due to its differing mount.

If you're in search of flashlight mounting solutions for the rare but super-slick SMR handguard, the WADSN SMR Rail Offset Mount for M300/600 Scout Flashlights is what you need!

Maybe you have accidentally broken your AUG vertical grip, or you bought the railed version and you want to embrace tradition? Luck would have it Army Armament now offers their AUG folding vertical grip as a spare part! The grip is constructed from high-strength ABS polymer with an alloy core and includes its spring and mounting pin. This part is compatible with the Army Armament AUG but may also fit AEG AUGs from other manufacturers.

Do you want to make your Delta Armory VZ.58 or equivalent look just like the real service rifle? Or maybe you fancy giving your M4 a more classic look, if so, the Ares VZ.58 Flash Hider; 14mm CW is for you! This flash hider is styled after the real steel VZ.58 muzzle device manufactured by the real steel brand Czech Small Arms.

Real muzzle brakes are designed to reduce felt recoil by redirecting gas out of the ports on each side, and although you won't get this effect with an Airsoft muzzle brake it will give your Airsoft rifle a unique look and add to the realism of the overall platform.

Its alloy construction and black finish are sure to withstand most bumps and scrapes on the battlefield, making it the perfect way to keep your outer barrel and precious inner barrel safe from damage. Style your AEG after an iconic service rifle and remember, VZ.58s are NOT the same as AKs!

The Ferret Hard Case is a compact yet incredibly tough Hard Case which can be used to transport and store any items that you want to keep protected from ingress of Water and Dust, as well as from Extreme Temperatures and rough Impacts. Independently tested by third party quality assurance company, Intertek, you can be sure that it lives up to its claims.

A 6mm BB Airsoft replica flash hider, designed for CYMA manufactured AK47 and AK74 replica Airsoft Electric Guns. This replica flash hider is an incredibly simple yet effective way to add an additional element of realism to your AEG AKs.

If you are considering getting a 9mm style AR but you aren't sure if you'll like it, take a look at the M4/AR15 Pistol Magazine Adapter from SRC. The adapter allows most M4/AR15 AEGs to use the pistol style magazines for the SR4 ST Falcon AEG, changing the look of your setup completely! This change is not permanent, however, as the adapter simply locks into the AR15 magazine release, and can be attached or removed as quickly as changing mags!

If you are rocking the Sig Air MPX and you are worried your battery will poke out of the handguard, worry no longer, Laylax have an innovative solution! The Handguard Battery Block for MPX AEG is designed to mount to the outer barrel using a grub screw and close the front end of the handguard up to stop your battery from hanging out when the SMG is pointed down. The block is constructed from aluminium with a matt black anodised finish and is styled to look like the gas block of the bigger MCX, meaning it shouldn't detract too much from the realistic looks of the MPX. This is why we love Laylax, they always come up with a nifty solution for these little niggles!

If you've been looking for some extra rail space on your Novritsch SSR90, this is for you! The Novritsch SSR90 M-LOK Extension mounts to the front of your SSR90 using a screw on either side. Once attached, you have access to an additional 6 M-LOK slots, 2 on top and 4 on the offset angles.

The mount is also designed to be compatible with suppressors, meaning they will not interfere with one another when both are mounted on your platform. If you're looking for some additional rail space, to mount all the mission essentials, then the Novritsch SSR90 M-LOK Extension is exactly what you need.