Delta Armory DA-PAR-10 PROARMS® PAR MK3 10" M4/AR-15 AEG

Delta Armory
Code:
509.99
  • Full metal construction - Mostly CNC 6063 Alu
  • Licenced by PROARMS®  - Detailed trademarks
  • Delta Armory Programmable ETU pre-installed

If you have the itch for a new AR but you want something rare, the Delta Armory PROARMS® PAR MK3 AEG is exactly that. Based on the real steel PROARMS® PAR MK3, this full-metal AEG is constructed with a CNC 6063 aluminium receiver and handguard and is equipped internally with the same fantastic pre-upgraded parts as the Delta Armory ALPHA ETU series. 

This means we are treated to a 6.03mm tightbore inner barrel, rotary HOP-up unit, SHS piston and tappet plate, a high torque motor and the Delta Armory programmable ETU, allowing for burst mode, binary trigger and precocking to be programmed in using the fire controls of the AEG itself. If you're looking for a lesser-seen design with AR compatibility, pre-upgraded internals and build quality that is a cut above the usual full metal M4, the Delta Armory PROARMS® PAR MK3 10" is one to watch!

Full description

Description

If you like unique AR platforms, you'll love the Delta Armory PROARMS® PAR MK3 10". This is the short-barrelled version of the PROARMS PAR MK3 used by the Thai Special Police, IDF Special Forces and the Czech 601st Special Forces Group, ideal for CQB skirmishers or outdoors skirmishers who like to move fast! 

The real PAR originates in the Czech Republic as a military/civilian AR-15 design offered to both military and police units and competitive shooters. The real deal's receiver is made from CNC aluminium rather than the usual forged and machined AR receivers, giving it a unique modern look at the cutting edge of rifle design. The Airsoft version is no different, rocking a 6063 aluminium receiver and handguard with some of the most precise engraved trademarks we have ever seen on an Airsoft gun. There are plenty of cutting-edge ARs out there with fancy handguards but the PAR MK3 breathes new life into the entire build of the ageing AR platform with a full external overhaul and the result is absolutely jaw-dropping!

Starting at the front, we can find a birdcage flash hider mounted to the 14mm CCW male threads at the tip of the 10" outer barrel. The birdcage looks great, but can easily be replaced with a tracer unit for an instinct aiming edge in low light or a suppressor for the stealthy aesthetic. The compact 10" barrel length is ideal for close quarters and fast-moving woodland warriors and stays agile and easy to point quickly even with a suppressor mounted.

Moving rearwards, we come to the CNC 6063 aluminium handguard; equipped with 20mm Picatinny rails at the 3, 6, 9 and 12 o'clock positions, ready for any 20mm Picatinny accessories you choose to mount. The handguard is similar in profile to the HK416, being slightly taller than a standard M4/AR-15 handguard to match the real thing. The front end of each rail is dynamically bevelled and oblong ports punctuate the rail surfaces to reduce weight for improved handling and easier target-to-target transitions. 

On the top of the handguard, we can find our front flip-up iron sight which is spring-loaded, requiring a press on the textured surface at the rear to deploy. The rear sight is mounted to the receiver rail and functions the same way; simply press the button and up it pops. Elevation adjustments are applied on the front sight using an AR-15 front sight adjustment tool and windage on the rear sight via the dial on the right side. The rear sight also features two apertures, a fine one for bright conditions and accurate semi-auto fire and a wider one for low light scenarios and full auto. 

Following the handguard, we come to the receiver which is also CNC machined from high-grade 6063 aluminium, making it a significant step up from the usual alloy receiver. The machining is absolutely immaculate, with sharp details and precisely engraved PROARMS trademarks on both the left and right side of the magazine well. Using real steel images for reference, the Delta Armory PAR 10" is bang-on perfect, with all the correct angles, protrusions and the combination forward assist/brass deflector budge machined exactly like the real thing. While it may not be an H&K, there is no compromise to be found in the PAR!

The layout of the controls matches other M4/AR-15 platforms, meaning no need to retrain if you are used to a standard AR despite the unique receiver of the PAR MK3. The fire selector is positioned just above the pistol grip and offers 3 modes of fire; SAFE, SEMI and AUTO, with a 90-degree throw between each mode. This makes the selector easy to switch, but not so easy that it can be knocked out of position accidentally. Each mode is denoted with crisply engraved bullet pictograms but the full auto mode is unmarked as the real PAR MK3 is semi-automatic only. No need to worry, the full auto mode on the Delta Armory PAR MK3 is still present in the third selector position as with any other M4. The magazine release is on the right side of the magazine well and is accessible for a right-handed user with the tip of the trigger finger.

Pulling back the charging handle, located at the top rear of the receiver will open the dust cover and retract the mock bolt carrier to allow access to the rotary HOP-up adjuster. This is the latest HOP-up unit design for the M4/AR-15 and provides finer increments of adjustment and holds its setting more effectively when compared to the older gear style HOP-up unit. The charging handle has an extended latch for easier access, allowing even those with thick gloves to access the HOP-up unit, though you may need to take off a glove to turn the adjuster! 

The pistol grip of the PAR MK3 boasts a refined grip angle for greater comfort when shooting with the stock fully collapsed and in more modern shooting stances. Based on the real steel "Gunfighter mod.3" grip, a modern ergonomic design, each flank of the pistol grip includes fine texturing for perfect wet weather handling. The trigger is known by Delta Armory as the CNC Type A Flat trigger, offering a flat serrated front surface with a short finger ledge, ideal for rapid double taps.

At the rear of the receiver, we come to the steel CQD style sling plate, which offers ambidextrous functionality with single-point slings; perfect for left or right-handed shooters. The steel construction of the sling plate practically guarantees even if you mount a massive rifle scope, PEQ box and RunCam, the sling plate will be strong enough to support the weight. Following the sling plate, we come to the good old AR buffer tube, constructed from alloy and offering 6 adjustment positions for the pre-installed stock, or any other M4/AR-15 AEG stock you choose to mount!

The stock itself is a crane-inspired design with a slimline form and a comfortable angled cheek rest, featuring a QD sling socket on either side, together with conventional "footman loops", aka sling slots. With a rubber butt plate featuring lattice checkering, this slimline crane stock stays solidly in your shoulder in any weather conditions but can be swapped for alternative M4/AR-15 AEG stocks if you want to change up the looks or have a preferred stock in mind for your build. 

The buffer tube also serves as the battery compartment for the PAR MK3. To access the battery compartment, you will need to pull the stock adjustment lever (located on the bottom of the stock) out and hold it in place, after which you can slide the stock off the buffer tube, revealing a Deans/T-Plug battery connector inside. We recommend a 7.4V 1300mAh LiPo in stick configuration for the PAR MK3 though you may need to keep the stock extended to fit this battery inside. Delta Armory recommends a LiPo battery measuring 1.4 x 1.9 x 10 cm approximately for full functionality of the sliding stock. 

Inside the version 2 gearbox, we are treated to CNC 18:1 ratio steel gears running on 7mm ball bearing bushings, an SHS piston with a full rack of steel teeth, an SHS tappet plate for reliable feeding, and a CNC aluminium piston head, cylinder head and nozzle for maximum long term durability. The cylinder is also CNC machined from steel, as is the spring guide.

These ultra-strong CNC parts are powered by a high-torque motor with Neodymium magnets, kept in check by the ETU/MOSFET system. The result is an incredible trigger response and rate of fire, with more than enough range to compete with the big boys out in the woods. The party trick of the ETU/MOSFET is the ability to program the fire controls for burst mode, binary trigger and pre-cocking, giving this incredibly cost-effective setup some functions usually reserved for platforms twice this price!

Whether you are working on your IDF Special Forces setup or seek a modern and unique AR platform, the Delta Armory DA-PAR-10 PROARMS® PAR MK3 10" M4/AR-15 AEG is the right tool for the job. With precise CNC 6063 aluminium externals and the same awesome pre-upgraded internals as the other Delta Armory ALPHA ETU series AEGs, the PAR MK3 10" is a flawless replica and a beast out in the field!

Features

  • Full metal construction - CNC 6063 alu receiver & handguard
  • 6.03mm Tightbore inner barrel - Awesome accuracy potential
  • Programmable MOSFET/ETU Pre-installed - Burst mode, binary trigger & pre-cocking options
  • 14mm CCW Male threaded outer barrel - Tracer/suppressor ready
  • 10" Barrel length - Ideal for CQB and fast-moving playstyles
  • 20mm Picatinny quad rail - Ready for 20mm Picatinny accessories at 3, 6, 9 or 12 o'clock
  • Flip-up aperture iron sights pre-installed - Adjustable and spring-loaded for fast deployment 
  • Unique PROARMS receiver design - Ultra modern, looks like nothing else out there!
  • PROARMS trademarks engraved on each side of the magwell - Flawless, sharp engraving
  • Rotary adjustable HOP-up unit - Accessible through the ejection port when the charging handle is held back
  • Ambidextrous sling plate - Steel construction, ready for a single-point sling
  • Ergonomic pistol grip - Gunfighter Mod.3 style, comfortable with a reduced grip angle
  • Enlarged trigger guard - Easy access to the trigger when wearing thick gloves
  • Flat "CNC Type A" trigger - Great for rapid semi-auto shooting
  • 6-Position M4/AR-15 buffer tube - Adjust the stock to suit your body type and loadout
  • Slimline crane style stock pre-installed - QD sling point on each side, buffer tube battery compartment 
  • Rear wired: Deans/T-Plug battery connector - Recommended battery: 7.4V 1300mAh LiPo in stick config 
  • MOSFET/ETU programming instructions are available via the QR code on the wiring inside the buffer tube
  • Compatible with M4/AR-15 AEG magazines - Plenty of spares available

Package Includes

  • Delta Armory DA-PAR-10 PROARMS® PAR MK3 10" M4/AR-15 AEG
  • 120rnd Mid-cap magazine
  • User manual

Specification

General

Weapon Construction External
Weapon Type
Assault Rifle
Over 18 Only Icon
Over 18
Yes
Icon UKARA - United Kingdom Airsoft Retailer Association
Defence / UKARA Required
Yes, No,
FPS Icon
FPS (Feet Per Second), using 0.20g BB
Approx. 330fps ± 10%, using 0.20g BB
Site Legal Icon
Site Legal, using 0.20g BB
Yes
Screwdriver Icon
Pre-Built
Yes
Package
Included Items
Magazine
Skill Level Icon
User Skill Level
Regular Player

Weight and Dimension

Weight KG Icon
Weight (KG)
Approx. 2.586kg
Weapon Length Collapsed
Length (Collapsed)
68.5cm
Weapon Length Extended
Length (Extended)
77cm

Construction

Colour Wheel Greyscale
Primary Colour
Black
Construction Icon
Construction
CNC 6063 Aluminium handguard & receiver. Alloy outer barrel, gas block, buffer tube & trim parts. Steel body pins, sling plate & dust cover. High density polymer stock & pistol grip
Weapon Construction External
External Construction
Polymer
Alloy
Aluminium
Steel
Gearbox Icon
Internal Construction
Polymer
Alloy
Aluminium
Steel

Weapon Specific

Power Source Icon
Powered By
Electric
Blowback Icon
Blowback
None
Weapon Platform
AR, M4 / AR-15 / M16, Assault Rifle, PROARMS PAR MK.3,
Magazine Style Icon
Magazine Style
Long Gun Magazine, Assault Rifle, M4 / AR Platform,
Fire Select Icon
Fire Selector
PatrolBase | Fire Select Safe
Safe
Patrol Base | Fire Select - Semi Automatic
Semi Automatic
Patrol Base | Full Automatic
Full Automatic
Programmable
Weapon Safety Features Icon
Safety Features
Trigger Lock
Shooter Configuration Icon
Shooter Configuration
Right Handed
Weapon Configuration Icon
Weapon Configuration
Standard
Weapon Scale Icon
Weapon Scale
1:1
Suggested BB Weight
0.25g

Hop-Up

Hop-Up Unit Icon
Hop-Up Unit
Yes
Hop-Up Unit Adjuster Icon
Hop-Up Adjuster
Rotary
Hop-Up Unit Location Icon
Hop-Up Location
Behind mock bolt carrier, accessible when the charging handle is pulled and held to the rear.

Furniture

Weapon Furniture Icon
Furniture
  • Railed Handguard
  • Flip-Up Ironsights
  • AR Buffer Tube
  • Railed Receiver
  • Sliding Stock
  • Bird Cage Flash Hider
  • Ergonomic Pistol Grip
  • Ambidextrous Sling Plate
  • Enlarged Trigger Guard
  • Extended Charging Handle
  • Flat trigger
  • Rubber butt plate
Rail System Icon
Rail System
20mm RIS / RAS , 20mm Railed Receiver,
Icon Stock Positions
Stock Setting
Sliding , Multi-Position ,
Weapon Length Extended
Stock Positions
6 Position
Sight Type Icon
Sight Type
Iron Sights , Aperture Iron Sight,
Sling Plate Icon
Sling Options
Buffer Plate , Stock , QD ,

Barrel

Outer Barrel Length (in)
10''
Icon Thread Type
Outer Barrel Thread Type
Male
Icon Thread Direction
Outer Barrel Thread Direction
CCW (Counter Clockwise)
Outer Barrel Thread Size
14mm
Inner Barrel Diameter
6.03mm
Inner Barrel Length
260mm

Magazine Specific

Magazine Type
Medium Capacity , AEG,
Magazine BB Capacity
Approx. 120 Rounds
Magazine BB Fill Method
Speed Loader
Magazine BB Fill Location
Top

Electric Gun Specific Information

Gearbox
Gearbox Icon
Gearbox Version
V2 Gearbox
Wiring Icon
Gearbox Wiring
Rear Wired
Spring Change Icon
Gearbox Quick Change Spring
Yes
Digital Trigger Icon
Gearbox Electronic Trigger
Yes
Split Gearbox Icon
Split Gearbox Design
No
Motor
Airsoft Motor Icon
Motor Type
High Torque
Battery Specific
Battery Connector
Patrol Base | Icon | Deans
Deans
Compatible Battery
Compatible Battery Type
Li-Po
Compatible Battery Configuration
Stick
Compatible Battery Voltage
7.4v

Product Testing Data

Notepad Icon
Test Description
330 FPS +/- 10%
Notepad Icon
Tested Using
0.2g ASG BLASTER
Notepad Icon
Test Date
08/12/2024

Size guide

Joule Charts

Special Instructions

These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.

FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.

Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.

Tap the tabs below to open the relevant chart for your replica.

Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.

Velocity BB Weight (Grams)
FPS 0.20 0.25 0.28 0.30 0.32 0.36 0.40 0.43 0.45 0.50
250 0.58 0.73 0.81 0.87 0.93 1.05 1.16 1.25 1.31 1.45
260 0.63 0.79 0.88 0.94 1.00 1.13 1.26 1.35 1.41 1.57
270 0.68 0.85 0.95 1.02 1.08 1.22 1.35 1.46 1.52 1.69
280 0.73 0.91 1.02 1.09 1.17 1.31 1.46 1.57 1.64 1.82
290 0.78 0.98 1.09 1.17 1.25 1.41 1.56 1.68 1.76 1.95
300 0.84 1.05 1.17 1.25 1.34 1.51 1.67 1.80 1.88 2.09
310 0.89 1.12 1.25 1.34 1.43 1.61 1.79 1.92 2.01 2.23
320 0.95 1.19 1.33 1.43 1.52 1.71 1.90 2.05 2.14 2.38
325 0.98 1.23 1.37 1.47 1.57 1.77 1.96 2.11 2.21 2.45
328 1.00 1.25 1.40 1.50 1.60 1.80 2.00 2.15 2.25 2.50
330 1.01 1.26 1.42 1.52 1.62 1.82 2.02 2.18 2.28 2.53
335 1.04 1.30 1.46 1.56 1.67 1.88 2.09 2.24 2.35 2.61
340 1.07 1.34 1.50 1.61 1.72 1.93 2.15 2.31 2.42 2.68
345 1.11 1.38 1.55 1.66 1.77 1.99 2.21 2.38 2.49 2.76
350 1.14 1.42 1.59 1.71 1.82 2.05 2.28 2.45 2.56 2.85
355 1.17 1.46 1.64 1.76 1.87 2.11 2.34 2.52 2.63 2.93
360 1.20 1.51 1.69 1.81 1.93 2.17 2.41 2.59 2.71 3.01

Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.

Velocity BB Weight (Grams)
FPS 0.20 0.25 0.28 0.30 0.32 0.36 0.40 0.43 0.45 0.50
250 0.58 0.73 0.81 0.87 0.93 1.05 1.16 1.25 1.31 1.45
260 0.63 0.79 0.88 0.94 1.00 1.13 1.26 1.35 1.41 1.57
270 0.68 0.85 0.95 1.02 1.08 1.22 1.35 1.46 1.52 1.69
280 0.73 0.91 1.02 1.09 1.17 1.31 1.46 1.57 1.64 1.82
290 0.78 0.98 1.09 1.17 1.25 1.41 1.56 1.68 1.76 1.95
300 0.84 1.05 1.17 1.25 1.34 1.51 1.67 1.80 1.88 2.09
310 0.89 1.12 1.25 1.34 1.43 1.61 1.79 1.92 2.01 2.23
320 0.95 1.19 1.33 1.43 1.52 1.71 1.90 2.05 2.14 2.38
330 1.01 1.26 1.42 1.52 1.62 1.82 2.02 2.18 2.28 2.53
340 1.07 1.34 1.50 1.61 1.72 1.93 2.15 2.31 2.42 2.68
350 1.14 1.42 1.59 1.71 1.82 2.05 2.28 2.45 2.56 2.85
360 1.20 1.51 1.69 1.81 1.93 2.17 2.41 2.59 2.71 3.01
370 1.27 1.59 1.78 1.91 2.03 2.29 2.54 2.73 2.86 3.18
380 1.34 1.68 1.88 2.01 2.15 2.41 2.68 2.88 3.02 3.35
390 1.41 1.77 1.98 2.12 2.26 2.54 2.83 3.04 3.18 3.53
400 1.49 1.86 2.08 2.23 2.38 2.68 2.97 3.20 3.34 3.72
410 1.56 1.95 2.19 2.34 2.50 2.81 3.12 3.36 3.51 3.90

Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.

Velocity BB Weight (Grams)
FPS 0.20 0.25 0.28 0.30 0.32 0.36 0.40 0.43 0.45 0.50
250 0.58 0.73 0.81 0.87 0.93 1.05 1.16 1.25 1.31 1.45
260 0.63 0.79 0.88 0.94 1.00 1.13 1.26 1.35 1.41 1.57
270 0.68 0.85 0.95 1.02 1.08 1.22 1.35 1.46 1.52 1.69
280 0.73 0.91 1.02 1.09 1.17 1.31 1.46 1.57 1.64 1.82
290 0.78 0.98 1.09 1.17 1.25 1.41 1.56 1.68 1.76 1.95
300 0.84 1.05 1.17 1.25 1.34 1.51 1.67 1.80 1.88 2.09
310 0.89 1.12 1.25 1.34 1.43 1.61 1.79 1.92 2.01 2.23
320 0.95 1.19 1.33 1.43 1.52 1.71 1.90 2.05 2.14 2.38
330 1.01 1.26 1.42 1.52 1.62 1.82 2.02 2.18 2.28 2.53
340 1.07 1.34 1.50 1.61 1.72 1.93 2.15 2.31 2.42 2.68
350 1.14 1.42 1.59 1.71 1.82 2.05 2.28 2.45 2.56 2.85
360 1.20 1.51 1.69 1.81 1.93 2.17 2.41 2.59 2.71 3.01
370 1.27 1.59 1.78 1.91 2.03 2.29 2.54 2.73 2.86 3.18
380 1.34 1.68 1.88 2.01 2.15 2.41 2.68 2.88 3.02 3.35
390 1.41 1.77 1.98 2.12 2.26 2.54 2.83 3.04 3.18 3.53
400 1.49 1.86 2.08 2.23 2.38 2.68 2.97 3.20 3.34 3.72
410 1.56 1.95 2.19 2.34 2.50 2.81 3.12 3.36 3.51 3.90
420 1.64 2.05 2.29 2.46 2.62 2.95 3.28 3.52 3.69 4.10
430 1.72 2.15 2.40 2.58 2.75 3.09 3.44 3.69 3.86 4.29
440 1.80 2.25 2.52 2.70 2.88 3.24 3.60 3.87 4.05 4.50
450 1.88 2.35 2.63 2.82 3.01 3.39 3.76 4.04 4.23 4.70
460 1.97 2.46 2.75 2.95 3.15 3.54 3.93 4.23 4.42 4.91
470 2.05 2.57 2.87 3.08 3.28 3.69 4.10 4.41 4.62 5.13
480 2.14 2.68 3.00 3.21 3.42 3.85 4.28 4.60 4.82 5.35
490 2.23 2.79 3.12 3.35 3.57 4.02 4.46 4.80 5.02 5.58
500 2.32 2.90 3.25 3.48 3.72 4.18 4.65 4.99 5.23 5.81
510 2.42 3.02 3.38 3.62 3.87 4.35 4.83 5.20 5.44 6.04