Airsoft Under £75

A great quality and fantastic value headset, which provides features usually only found on headsets twice the price! This unit is fully adjustable to fit most heads and folds up small for easy transport.

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

The Double Eagle M56AL is the long version of the well liked M3 super 90 shotgun, a classic pump action shotgun design which feeds from 30rnd mock shotgun shells in the breech, and fires 3 BBs per trigger pull to appropriately simulate the spread of a real shotgun buckshot shell. The M56AL is constructed almost entirely from polymer with an alloy outer barrel and mock magazine tube, which makes this shotgun light and manoeuvrable despite its large and in charge status. Whether you fancy a challenge in CQB, or you are a fan of the movie Heat (1995), this shotgun would be an asset to your loadout.

Ever heard of the MG36? Potentially not, as this support weapon version of the AR36 never made it past the prototype stage, though the elite German KSK has been sighted running a similar setup in the early 2000s in Afghanistan. The NUPROL 1200rnd Electric drum magazine allows you to add some serious MG36 like firepower to your AR36 platform AEG, and transform it to provide supporting fire for the team. This drum magazine is constructed from high-density polymer with a modern design aesthetic, fitting in perfectly with the all polymer, highly modern AR36 platform. This magazine is an autowinding design which requires 3x AAA batteries to operate. 

If you are looking for a Tracer Unit with Russian styling the KP-9 Spitfire Tracer Unit from 5KU is one to keep an eye on. This device is based on the real world DT KP-9 flash suppressor used by Russian Special Forces with their PP-19-01 SMGs and is ideal for any 9mm style Airsoft SMG but will fit any Airsoft rifle with a 14mm CCW male threaded barrel.

This KP-9 isn't just about the looks either, inside you will find a Spitfire Tracer insert which illuminates green tracer BBs and provides a realistic muzzle flash effect each time you fire. The unit can be operated in flash only, tracer only or tracer and flash mode, giving plenty of options for the aggressive, the realism focussed and the more stealthy playstyles out there. Whether you run a PP-19 AEG or you are looking for the most menacing looking Spitfire tracer unit out there, this will do the trick!

Looking for something to safely transport and store your expensive guns? Here you have it. Made from high-strength polymer with eggshell-style foam filling, the Rifle hard case from Evolution Airsoft has been specifically designed with Airsoft replicas in mind, providing the necessary protection without breaking the bank. 

The Double Eagle M62 is a lightweight, bolt action Sniper Rifle which is powered by spring. This means that the Bolt must be pulled back for each shot, just like the real thing, which will compress the Spring whilst loading a BB into the chamber.

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Ballistic Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Ballistic Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

If you are running the Well Minigun you will probably want a couple of these on hand to keep up with its intense rate of fire! The Well 1200rnd Magazine for WE23-S Mingun holds 1200 BBs and winds itself via the internal motor of the Well Minigun, meaning no need to do anything but pull the trigger!

The magazine indexes at the rear and rocks in to lock at the front, similarly to an AK or FAL platform but backwards, and the magazine release is located on the front of the mag, taking the form of a button. To fill the mag, you will need to remove the rear plate to expose the fill window by squeezing the two tabs on either side of the central "bar" on the rear plate and removing it, together with its internal spring. Remove the entire assembly, pour your BBs into the mag,  reinstall the rear plate and you are ready to shoot!

For those of you starting out in Airsoft skirmishing the CM.126 is a great starter pistol for beginners, or a budget friendly sidearm for when your primary is empty and need to quickly switch to a backup. 

Ready to go out of the box, this electric Airsoft 6mm BB gun gets you straight into battle, and even features an adjustable Hop-up.

With an alloy mock slide and polymer frame construction, the CM.126 is lightweight and efficient at both semi and full automatic, this pistol has everything you need to get you on the field.

For those of you starting out in Airsoft skirmishing the CM.126 is a great starter pistol for beginners, or a budget friendly sidearm for when your primary is empty and need to quickly switch to a backup. 

Ready to go out of the box, this electric Airsoft 6mm BB gun gets you straight into battle, and even features an adjustable Hop-up.

With an alloy mock slide and polymer frame construction, the CM.126 is lightweight and efficient at both semi and full automatic, this pistol has everything you need to get you on the field.

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Maritime Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Maritime Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

Looking for a safe and tacticool way to store your primary, and maybe a few other bits? Evolution Airsoft have entered the market with new tactical rifle cases that will ensure your AEG has somewhere nice to live. Made from high-strength polymer with eggshell-style foam filling, the Rifle hard case from Evolution Airsoft has been specifically designed with Airsoft replicas in mind, providing the necessary protection without breaking the bank.

If you are looking for a full loadout of high-speed magazines to keep your high rate of fire setup well fed, Lancer Tactical designed their "Speed" magazine for this exact purpose. The magazine holds 130 BBs and is constructed from high-density polymer with a steel feed spring and can be loaded through the fill/feed port at the top of the magazine body.

The Speed Magazine has a witness window on the left side so you can keep track of your remaining rounds and also has a digital style matrix at the bottom of each side which can be used to numerically mark your magazines for identification purposes. The baseplate of each mag has a grip assist built in which can also be used as a makeshift support using the "mag-podding" technique. This pack contains 5 magazines at a discount so if you need a full compliment of speedy feeding mags here is your chance!

If you need an Airsoft area denial tool a MOSCART launcher would be the one to go for. The S&T 120rnd 40mm MOSCART Gas Grenade; 3 Pack is a great value pack of 3 MOSCART Grenades designed for Airsoft 40mm MOSCART grenade launchers. Each grenade is powered by green gas with a 120 BB capacity and can be loaded using a speed loader through the apertures on the front. The gas fill valve is also on the front/top of the shell. When filling this grenade we advise that you wear eye protection throughout the process and fill the gas before filling the BBs.

When fired in a MOSCART launcher this shell will dispense all 120 BBs in a righteous cloud of fury and has the potential to clear a corridor or bunker in a single shot. If you run a grenade launcher in game and want to make good use of it, this 3 pack of MOSCARTs will see you equipped to shell the *beep* out of the enemy team!

If you need an Airsoft area denial tool a MOSCART launcher would be the one to go for. The S&T 70rnd 40mm MOSCART Gas Grenade; 3 Pack is compatible with Airsoft 40mm MOSCART grenade launchers. The shells are powered by green gas with each shell holding 70 BBs. The grenades can be loaded using a speed loader through the apertures on the front and the gas fill valve is also on the front/top of the shell. When filling this grenade we advise that you wear eye protection throughout the process and fill the gas before filling the BBs.

This shell is rather short in overall length, making it easy to carry more grenades and really give the enemy what for. The short overall length is also ideal for pistol grenade launchers and other short 40mm MOSCART launchers as it avoids the rather unrealistic look of the shell poking out of the end of the barrel.

Are you evil? Do you not think 3/6 shots per trigger pull is enough firepower? In that case, allow us to introduce you to the NUPROL 1200rnd Electric Drum Magazine for Tri-shot Airsoft shotguns, a device that will not make you any friends at a CQB skirmish, thats for sure! This drum magazine is constructed from high density polymer with a modern look, matching well with modern tactical pump action Airsoft shotguns and transforming any shotgun it is mounted to into an intimidating CQB dominator, both in looks and in function! 

A fully functioning, red/green illuminated replica Holographic sight based on the real EoTech 551 Holographic sight, capable of being mounted onto Airsoft weapons with 20mm RIS rails. 

For those of you looking for a simple, yet effective red-dot that's ideal for pistols or compact SMGs, you've come to the right place! Easily fitted to any Picatinny rail using the 2 included bolts, tightened with an Alley key, the sight takes CR2032 button batteries and is switched on and off using the large rubber side click button.

This mini Airsoft Red Dot Sight also comes with a protective Polymer casing that is excellent when storing and transporting your AEG or Optic if you keep it separate from your Airsoft Gun. Windage and Elevation is also easily adjustable for sighting in your Airsoft gun any time of the day using an Allen key.

If you have been eyeing up a baby Hi-capa for some time, but you have large hands, we have found the pistol for you! Introducing the Hi-capa 3.8 X GBB Pistol, Vorsk's interpretation of the concept behind the EU19X; providing a short and easily holstered front end, and a full-length grip for optimal ergonomics. The pistol features an alloy slide, outer barrel and frame with an aggressively textured polymer pistol grip and light enhancing green fibre optic sights.

If you are looking for a cheap yet decent holster filler, Golden Eagle has something you'll like! The G.E Hi-capa 4.3 is a full metal clone of the Tokyo Marui, meaning 100% compatibility with aftermarket upgrades and the intense recoil and realistic feel of full metal straight out of the box.

Though it is based on the Tokyo Marui 4.3, the Golden Eagle Hi-capa has a 6.02mm tightbore inner barrel, adding to its accuracy potential, improving gas efficiency and raising FPS slightly. Golden Eagle also saw fit to add an 11mm CW female threaded outer barrel, meaning you don't need a new outer barrel to fit a tracer or suppressor, just an 11mm CW to 14mm CCW adapter. Unlike many other cheap GBB pistols, the Golden Eagle Hi-capa feels buttery smooth when cycling and is remarkably consistent, pointing to well-made internals and tight tolerances.

Whether its fate is to be your trusty sidearm, ready for close encounters, or it is destined to be built up into a Speedsoft monster, bristling with upgrades, the Golden Eagle Hi-capa will serve you well!

Take your shooting to the next level with the Perun Front Wired MOSFET V2 Hybrid, which gives you access to many advanced features such as adjustable trigger sensitivity, active brake, binary trigger, system diagnostics and many more!

The unit is a drop in MOSFET, meaning that it is far easier to install than many other MOSFETS and you won't need to modify your gearbox in the majority of cases, do be aware we recommend this for experienced technicians only.

An 18 round Co2 Powered Gas Magazine for the UMAREX Glock 17 Gen4 / Gen5 Gas Blowback Pistol, featuring a top of the range build quality & official Glock trades.

If you are looking for a new stock, but it needs to be able to house a battery, you are in luck! The Krytac M4/AR15 Battery stock is constructed from high-density polymer with a steel adjustment pin and steel QD sling points on either side. Perfect for those who are bored with the super common crane stock look!

If you are looking to further extend your advantage and push your TM NGRS system to the limits reinforced gears are a must for long term reliability under increased stress. The Laylax EG Hard Gear Set is specifically designed for the Tokyo Marui Next Generation Recoil Shock (NGRS) gearbox and includes a hardened steel spur gear, sector gear and bevel gear. This gearset is a standard ratio set (18:1), intended to provide a great compromise between high speed and high torque, allowing you to take your build in either direction and still benefit from reinforced gears!

A multipack of magazine for the ASG Scorpion Evo. These new magazines from ASG allow you to insert your own decals to make your magazines look more realistic. 

A 20 Round Green Gas Magazine for the UMAREX Heckler & Koch Gas Blowback G3A3 Rifle.