All External Airsoft Parts & Attachments

A mock suppressor designed to fit on Airsoft Rifles and other Weapons to give the weapon a more tactical look.

A mock suppressor designed to fit on Airsoft Rifles and other Weapons to give the weapon a more tactical look.

This Airsoft suppressor is designed to be fit onto 14mm Counter Clockwise (CCW) threads, and is foam filled to reduce the audible output of the weapon. The suppressor is constructed from Alloy, and features a spring core and foam filling, and is finished with US Navy Seal Branding. 

Looking for a tiny suppressor that will fit inside your rail system (if it is over 32mm inner diameter)? The 100mm Dummy Silencer from Big Dragon provides a cost-effective solution! The inside of this suppressor is foam-filled, meaning you will experience some noise dampening of your gun's muzzle report! The suppressor has both CCW and CW threading, one thread on one end, one on the other - A thoughtful touch, ensuring compatibility as long as your threads are 14mm in diameter!

Want your rifle to look a little more "special ops" ready? Perhaps you have a long inner barrel you need to hide? The big dragon QD dummy suppressor is just the ticket! Styled after the ubiquitous Knights Armament Co. QD suppressor, this is the perfect accessory for an M4a1 CQB or block 1 CQBR for a mid-2000s US Special forces loadout. 

Want your rifle to look a little more "special ops" ready? Perhaps you have a long inner barrel you need to hide? The big dragon QD dummy suppressor is just the ticket! Styled after the ubiquitous Knights Armament Co. QD suppressor, this is the perfect accessory for an M4a1 CQB or block 1 CQBR for a mid-2000s US Special forces loadout. 

An Airsoft mock suppressor, designed to replace an Airsoft gun's flash hider, and featuring an imitation of the US SOCOM special operations forces weapon suppressor. 

A Dummy Silencer/Suppressor for Airsoft Guns which have a 14mm CCW Thread. It is constructed from Aluminium, has an overall width of 32mm, length of 196mm and easily attaches to threads by screwing onto the end of your barrel. The core of the Suppressor is filled with Dummy Foam and a Spring Core to keep the center clear, and ensure BBs aren't fouling on the interior foam.

A Mock Suppressor designed to fit on Airsoft 6mm BB Gun Assault Rifles, and is branded to look like it is a US Airforce Supplied Suppressor.

An Alloy constructed Suppressor which will fit any Airsoft Gun with a 14mm Male Thread. There is both a CW and CCW Thread on either end of the Suppressor, ensuring maximum compatibility with replicas. The core of the Suppressor is foam-filled to help deaden the sound of your replica, and a spring core ensures that baffle strikes are minimised. The outer shell of the Suppressor features the Blackwater logo and the text 'We Were Everywhere'.

A 14mm counter clockwise threaded Airsoft suppressor, featuring US Government military markings, designed to mount onto your Airsoft gun's outer barrel and replace the original flash hider. 

Based on a design by KAC, this is an Airsoft flash hider and quick-detach suppressor designed to fit on any Airsoft gun with a 14mm counterclockwise thread - conveniently, that's most Airsoft guns!  

Based on a design by KAC, this is an Airsoft flash hider and quick-detach suppressor designed to fit on any Airsoft gun with a 14mm counterclockwise thread - conveniently, that's most Airsoft guns!  

A replacement ergonomic pistol grip for M4, M16 and AR-15 Platform AEG Receivers, simply replacing the original grip. 

A replacement ergonomic pistol grip for M4, M16 and AR-15 Platform AEG Receivers, simply replacing the original grip. 

A very clever little replacement adjustable stock designed to enhance the ergonomics of M4 and M16 type Airsoft Electric Guns and make your Airsoft gun more controllable. 

A Mock Suppressor designed to fit on Airsoft 6mm BB Gun Assault Rifles, and is branded to look like it is a Special Forces SOPMOD Supplied Suppressor. 

A high quality replica suppressor for Airsoft weapons, complete with replacement 'Birdcage' type Flash Hider to attach onto.

A 20mm Railed MK18 Handguard for AR Platform AEGs and GBB replicas, which is ideal for those searching for the 'Special Forces' look. It is constructed to a lovely standard from Aluminium and features Numbered Rail Slots for the precise placement of accessories. The bottom Rail measures a total of 21.3cm, and the other three at 24.4cm. If you're looking to spice up your AR with some external furniture, then a Handguard swap is a great place to start.

A Polymer constructed stock which is tough, made from dense materials and is reminiscent of the Amoeba stock due to the easy access spring-loaded door which gives access to the battery compartment.

A Quick Release Sling Loop for QD Sling Sockets, allowing you to install a Sling Loop that can be quickly released at the press of a button. This makes it ideal for handing your replica over for Chrono, or if you have multiple guns with QD sockets you can switch primaries in a hurry without taking your sling off!

An Aluminium constructed outer barrel for M4/M16 based Airsoft Electric replicas. It has a 14mm CCW thread at the end for the addition of muzzle devices and is a relatively easy part to install.

This alloy suppressor is designed to fit easily onto rifles with an AR birdcage-style flash hider.

If you're interested in going sneaky on the cheap, the Big Dragon 135x34mm Dummy Suppressor; 14mm CCW & CW should suit your needs. This aluminium dummy suppressor is equipped with 14mm CCW threading at one end and 14mm CW threading at the other, meaning it can be used on both common CCW barrels and awkward CW barrels. 

Featuring a foam internal filling stabilised with a steel spring, the Dummy Suppressor should slightly muffle the muzzle report of your AEG or GBB, though its main purpose is to provide sneaky looks. Weighing in at 117 grams approximately, this suppressor is ideal for AEG and GBB rifles but can still be used on GBB pistols, potentially with a slight reduction in gas efficiency. 

If you run a GBBR M4/AR-15 and you want an easy way to improve your weapons handling, the Aluminium BAD lever for M4/AR-15 from Big Dragon is what you need! This device attaches to the bolt release catch on the left side of the receiver and allows you to drop the bolt after a reload without having to hit the ping pong paddle, instead you press this lever with your trigger finger. The BAD (Battery Assist Device) also allows you to lock the bolt to the rear without taking your hand off the pistol grip with a push upwards on the lever when the charging handle is pulled back.

AEG users need not feel left out; the BAD can still be mounted to your AEG, but more as an aesthetic touch to mimic real world customised ARs. Compatibility wise, this device may need modification or shimming for a tight fit on any specific platform, so we only recommend this part for experienced users.

A suppressor designed to fit onto Airsoft 6mm BB Gun in order to dampen the sound leaving the barrel.

If you want to style up your M4/AR15 with some interesting small parts, starting with the fire selector isn't a bad shout! Introducing the Custom Safety Selector from Big Dragon, a stylish modern selector moulded from polymer, with an enlarged design and grooves for additional grip which guarantees you won't slip off the selector at a critical moment! This selector could be the icing on the cake that is your latest high-speed M4 build, and provides a vast improvement over standard M4/AR15 selector levers. 

A Krinkov style Flash Hider/Amplifier for Airsoft Guns with 14mm CCW Threads. It is designed for an AK Platform Rifle, but will attach and fit to anything with a 14mm CCW Thread that you think looks good. The Flash Hider doubles up as an Amplifier, making your Airsoft Gun sound louder when installed. It is also compatible with standard AK threads by removing the inner sleeve/adapter.

A set of rail panels which can be cut to size to give you a better grip on your 20mm RIS / RAS Rail set.

A rubberised vertical foregrip for Airsoft replicas with a 20mm rail, offering stability and a comfortable platform to brace your rifle.