Refine results
Refine by
Viewing 30 of 112.
grid
list
£3.99
  • Vented Base
  • Screws included
  • Large adjustment screw

An ventilated, alloy constructed replacement base plate for a standard M4 AEG motor base plates in pistol grips. 

£4.99
  • Rubber Inlay
  • Compact Grip
  • For M-LOK Rails

A short and stylish foregrip for M-LOK rail systems with a rubberised inlay, which will give you a sturdy and comfortable platform to brace your rifle and improve your stability when shooting.

£4.99
  • Rubberised
  • For 20mm Rails
  • Textured Surface

A rubberised vertical foregrip for Airsoft replicas with a 20mm rail, offering stability and a comfortable platform to brace your rifle.

£4.99
  • Modular Design
  • Ridged & Stippled
  • Polymer Construction

A handstop for M-LOK rail systems that is modular, allowing the user to set it up perfectly for them and providing a stable platform to pull forward on the rifle with your lead hand, vastly improving stability.

£5.99
Was £8.99
Save £3.00
  • Compact Design
  • For 20mm RIS / RAS
  • Lightweight Foregrip

A low profile short grip, designed to give the user an additional grip point, whilst at the same time giving the weapon a lower visible profile and allowing for more space to manoeuvre. 

£5.99
Was £9.99
Save £4.00
  • Ergonomic Design
  • Promotes Natural Grip
  • Internal Storage Compartment

An ergonomically designed 20mm RIS foregrip, created to promote a comfortable and natural grip on their Airsoft gun. Constructed from high quality polymer with a slightly textured surface.  

£5.99
  • Easy to Affix
  • KeyMod Compatible
  • Storage Compartment

A vertical foregrip designed to be attached to more modern KeyMod compatible rails and handguards. The grip gives you another position to manipulate the weapon.

£5.99
  • Easy to Affix
  • M-LOK Compatible
  • Storage Compartment

A vertical foregrip designed to be attached to M-LOK compatible rails and handguards. The grip gives you another position to manipulate the weapon.

£6.69
  • Stippled
  • Low Profile
  • Small Compartment

A low profile ergonomic & stippled grip constructed from Polymer for attaching to Airsoft 20mm RIS rail systems.

£6.99
  • Slides Over Existing Grip
  • Useful For Pressure Pads
  • Stippled To Improve Handling

A thin rubber cover that slides over your existing pistol grip to give you extra grip in slippery conditions, or when using gloves.

£6.99
  • Compact
  • Textured Grip
  • For M-LOK Rails

A textured and compact foregrip for M-LOK rail systems, which will provide a more stable shooting position by giving you a stronger hold on the front of your weapon, allowing you to pull the stock into your shoulder better.

£6.99
  • Tools Included
  • Internal Storage
  • Compact Design

A slight angled fore grip designed to stiffen up your grip and aid in improved accuracy down range. A must for anyone wishing to keep a low profile and slick look but gain a tactical advantage on a longer weapon or super CQB package.

£6.99
  • Push-Fit Type
  • For CYMA AKs
  • Alloy Construction

A replacement Alloy butt plate for CYMA branded AK series replicas.

£6.99
  • Textured Surface
  • Ergonomic Grooves
  • Rubber Construction

A set of Rubber Pistol Grips for Army Armament 1911 Gas Blowback Pistols, which comes as a one-piece design as seen on the R32, and are very easy to install. Simply undo the screws holding your current Pistol Grips into place (carefully removing them as there may be springs on the underside) and install the new set from the front.

£7.99
  • Textured Surface
  • KeyMod Rail Foregrip
  • Low Profile Compact Grip

A short and compact KeyMod foregrip, designed to be attached to KeyMod Railed Hand Guards to provide an additional control when handling your Airsoft weapon. 

£7.99
  • Angled Fore Grip
  • Durable Polymer
  • Raised Plate Included

A lightweight and durable Angle Foregrip designed for use with 20mm Airsoft RIS / RAS rails. The grip allows you to control your weapon more reliably by positioning your hand over the centre of the bore. 

£7.99
  • Hollow Center
  • Very Secure Fitting
  • Fits Any 20mm Rail

Built to last! Very secure when installed onto your Airsoft Gun's 20mm RIS / RAS rail sections. Provides a comfortable grip on the front of your Airsoft Guns. 

£7.99
  • Stippled
  • Improve Grip
  • Easy to Replace

A set of replacement/upgrade pistol grips for the Army Armament branded 1911 gas blowback pistols.

£8.99
Was £15.99
Save £7.00
  • Rear Sling Loop
  • Textured Butt Plate
  • For AEG Buffer Tube

A spare or replacement standard M4 type stock for Airsoft M4/M16/AR-15 AEGs with an AEG type buffer tube.

£8.99
  • Textured Grip
  • Finger Ridge Design
  • For AK47/74 Platform

A replacement pistol grip for AK Platform weapons, such as the AK47 and the AK74. The grip itself is constructed from lightweight polymer.

£8.99
  • Easy To Mount
  • Lightweight & Durable
  • Internal Hidden Storage

A perfect grip for people with all sized hands. Secures in no time with only one bolt to care about.

£8.99
  • Vertical Foregrip
  • Bottom Screw Tightens
  • Tightly Locks into Place

A Vertial Foregrip designed to give the user an extra control point on their weapon. The foregrip is constructed from Polymer and is designed to fit 20mm RIS / RAS Rails. 

£8.99
  • Folding Foregrip
  • Side Screw Tightens
  • Tightly Locks into Place

A very easy to use fore grip that can be locked in a compact or full vertical position depending on your situation and requirements. 

£8.99
  • Ergonomic
  • Fits Many Brands
  • High Density Polymer

A Polymer constructed and ergonomic upgrade/replacement pistol grip for many brands of Airsoft Electric AK platform replicas.

£8.99
  • Complete Set
  • For URX Handguards
  • Build Your Dream Setup

A full kit for URX3 type handguards which includes rail covers, 20mm rail pieces and two types of hand stop, to allow you to create your dream setup.

£9.99
  • For KeyMod Rail
  • Lightweight Alloy
  • Hand Stop Mount

A KeyMod panel, designed to be attached to Handguards and provide a Hand Stop point, using it to stop your hand from sliding in front of your Airsoft gun's muzzle.

£9.99
Was £12.99
Save £3.00
  • Lightweight Design
  • Textured Grip Surface
  • Replacement Pistol Grip

A simple drop-in fit replacement pistol grip for M4, M16 and AR-15 Platform AEG receivers, replacing the original grip for one with enhanced ergonomics. 

£9.99
  • Hollow Center
  • Very Secure Fitting
  • Fits Any 20mm Rail

A comfortable, aesthetically pleasing, practical attachment for any Airsoft rifle, carbine or submachine gun with 20mm RIS rails.

£9.99
  • Angled Fore Grip
  • Raised Plate Included
  • Strong, Durable Polymer

This lightweight and durable angled fore-grip is a replica built on the AFG1 Style, designed to allow more reliable control of your weapon.

£9.99
  • Built In Laser
  • Angled Foregrip
  • Textured & Ridged

An ergonomic angled foregrip with a special trick up its' sleeve... it has a built in laser! Designed to make sure your aim is steady and on target. 

Looking for something to make your Airsoft Weapon look a little different? We have a range of Grips and Stocks designed for both looks and functionality, with parts available for those who want more tactical upgrades, as well as visual upgrades for those who are all about standing out from the crowd.

We have a range of replacement Grips and Stocks for both Electric Powered Airsoft Rifles and Gas Blowback and HPA weapons.

If you're wondering what will look best on your rifle why not bring it in to our Brick and Mortar store in Huddersfield, between Leeds and Huddersfield and you can try all the parts on for size before you buy them.

If you can't find something that you like, or want something which isn't on the website why not contact us via Phone and we can do our best to source it for you!
Telephone: 01484 644709