All External Airsoft Parts & Attachments

A replacement outer barrel for M4/15/16 variants that is constructed entirely from a strong and durable Alloy.

If you have been messing around with your SMG-5 AEG and you have lost your pins, CYMA has the cure! This original parts set includes 2 body pins, one for the trigger group and one for the rear receiver/stock. The pins are constructed from alloy and are compatible with CYMA SMG-5 AEGs but may also fit others, though we cannot guarantee it.

A high strength sling plate constructed from a dense Alloy that allows you to attach a sling to your AK47 platform weapon.

A Tactical Suppressor for Airsoft AEG Rifles or Pistols rocking a 14mm CCW thread. This classic suppressor style will fit right on almost any Airsoft Assault Rifle!

Lost a handguard pin from your sneaky SMG-5? That's a shame, but fortunately, we have the solution! The CYMA Handguard locking pin is designed for the CM.041 SD6 AEG series, but may also fit other SMG-5 SD6 AEGs, though we are unable to confirm which ones. The pin is constructed from alloy and is packaged as a single pin, so if you have lost both pins make sure you order two!

If you have dinged up your integral suppressor for your CM.041SD, fear not! You can have your sneaky beaky SMG looking great once again with this replacement original part from CYMA.

An Aluminium constructed charging handle extension for AK style replicas.

This metal AK47 body by CYMA is constructed from Aluminium and zinc alloy and is finished in a period accurate gun metal grey. This is the perfect solution for a CM.028 or CM.522 owner who wants to give their AK a metallic feel and increased realism!

If you have lost your AK AEG charging handle spring, rod or top cover retention latch you are in luck! The CYMA Charging Handle Rod & Spring Set for AK47/74 AEG is an original replacement part set for CYMA AKs but should also fit other Tokyo Marui clone AK series AEGs as well. The set includes the charging handle spring, guide rod and top cover retention latch.

If you are gearing up to spruce up your old AK AEG this might be handy! The Front Handguard Cap with Sling Point from CYMA is an original replacement part for the CM.04x series AKM/AK74 AEG. The part is constructed from alloy and includes the rotary locking lever for the LCT/VFC/real steel style of AK handguard attachment. This part is intended for the CM.04x series but should also work with VFC and LCT AKs, though the part may need modification. This part will not fit an AKS-74U rifle, it is designed for full size AK handguards only.

If you're looking for a spiffy new flash hider for your SMG-5, you've come to the right page!

Constructed from sturdy alloy, this flash hider sports a birdcage style design, quickly and easily attached / detached using the handy tri-lug attachment system. This flash hider is designed for use with CYMA CM.041 models, however it should fit other brands of SMG-5.

A Krinkov style Flash Hider/Amplifier for Airsoft Guns with 14mm CCW Threads. It is designed for an AK Platform Rifle, but will attach and fit to anything with a 14mm CCW Thread that you think looks good. The Flash Hider doubles up as an Amplifier, making your Airsoft Gun sound louder when installed. It is also compatible with standard AK threads by removing the inner sleeve/adapter.

If you want a new look for your M4/AR-15 AEG a new stock is probably the easiest way to do it! The VLTR Style Clubfoot IMOD stock from CYMA is an enhanced stock design with a Crane stock sized battery compartment built in and aluminium QD sling sockets on either side. The set includes the IMOD stock, a 6-position M4/AR-15 buffer tube and the mounting bolt and spacer so you can fit the stock as an alternative to fixed stocks and PDW stocks. This is why they call the M4 platform "Barbie for men"!

If you are undecided when it comes to vertical grips and sometimes like the old-school ways, this Folding Vertical Grip from CYMA is ideal for you! Constructed from high density polymer with a steel folding mechanism, the Folding Vertical Grip can be mounted to any 20mm Picatinny rail via its spring-loaded QD mount. 

To mount the grip, simply push the textured end of the locking bar on the mount in and slide it onto the front of your rail. When you release the locking bar, the grip will stay right where it is. To fold and unfold, simply press the central screw-like button and position the grip in either the horizontal or vertical position. 

At the front of the grip, we are treated to a hand stop-like curved protrusion intended to prevent you from slipping off the grip and potentially shooting your hand; a useful feature if you mount this right at the front of a short-barreled platform. If you're looking for an affordable 20mm Picatinny grip solution with plenty of functionality, the CYMA Folding Vertical Grip is one to watch!

If you want to add a customised look to your rifle a new muzzle device is probably the easiest way to make it stand out! The SFMB Muzzle Brake from CYMA replicas the real SFMB muzzle brake and is constructed from steel with 14mm CCW threading. Real muzzle brakes are designed to reduce felt recoil by redirecting gas out of the ports on each side, and although you won't get this effect with an Airsoft muzzle brake it will give your Airsoft rifle a modern, customised look.

The CYMA Front Sling Mount Pin for SMG-5 AEG is a replacement original part for the CM.041 SMG-5 AEG series and mounts to the front sight block to provide a sling loop on the left side. If your original sling loop is damaged or has gone missing, here is your replacement!

A unique and imposing Steel constructed muzzle brake for your AR-15/M4/M16 replica, or any other weapon with a 14mm CCW threaded outer barrel.

If you want to add some tactical trimmings to your AK an extended fire selector would be a good call. The CYMA Tactical Extended Fire Selector Lever for AK47/74 AEG is constructed from stamped steel and is a modernised design with a cutout for the AK bolt handle and a ledge that can be used to select fire modes from a firing grip.

With this selector installed you no longer need to take your hand off the pistol grip to select your fire mode; simply move the new selector using the ledge and your trigger finger. This makes a massive difference when it comes to handling an AK and allows it to go toe to toe with the AR platform in ergonomics and efficiency. A perfect item for any Tactical AK or PMC style custom AK build, this selector lever not only looks super slick but also makes your AK super slick to use!

A replacement flash hider for any Airsoft weapon with a 14mm counter-clockwise thread. It's designed to replicate the original iconic AKM flash hider.

You wanted an SMG-5K so you got one, then after a while of running it you wanted an SMG-5 with a stock and you think to yourself "Damn! I godda fork out another £150 on a new SMG-5!? 😩" Well do we have a treat for you! A Stock that attaches to your SMG-5K and turns it into the ultimate PDW, it's retractable and extendable and constructed from a lovely alloy making for a super tough construction.

If your AK47 selector lever is looking a bit battered or you've lost some bits, CYMA has your back! The Fire Selector Lever for CM.028 AK47 AEG is a replacement original part for the CM.028 series but should also fit other Tokyo Marui compatible AK AEGs. The lever itself is constructed from stamped steel and comes with the parts required to attach it, including the cap which is one of those bits which likes to go missing.

If your CM.041 SMG-5 AEG has a worn-out muzzle device perhaps it is time to switch it out for a nice new one. This replacement original part from CYMA should do the trick! The Threaded Tri-Lug Muzzle Device is designed for the CM.041 SMG-5 AEG series and is constructed from aluminium. The device mounts to the front sight assembly of the CM.041 series and provides tri-lug mounting apparatus and 14mm CCW male threads at the tip, protected with a knurled thread protector. Freshen up your old SMG-5 with a new muzzle device!

If you own an AK-47S underfolder AEG and you want to elevate its realism, a metal body kit is the key! The CYMA Metal Receiver for TM AK47S AEG is compatible with the CYMA CM.028S and Tokyo Marui AK-47S AEGs and will also fit others as long as they use the Tokyo Marui external design and have an underfolding stock.

The receiver is designed to match the original AK-47S "milled" receiver style, complete with weight-reducing cutouts at the front on either side, steel mock pins for some nice extra detail and engraved Cyrillic fire selector markings, an appropriate nod to realism. At the rear of the receiver, there are cutouts so an underfolding stock can be installed, and there are no conventional stock tangs on this receiver so it is not compatible with the full stock or side folding stock variants of the AK-47 AEG. If you want your AK-47S to be as its creator intended, this metal receiver kit is what you need!

If you have had a mishap with your CYMA CM.028 and cracked the battery tray you aren't the first and you likely won't be the last! The CYMA Charging Handle Base/Battery Tray for CM.028 AK47 AEG is designed to replace the battery tray inside TM pattern AK rifles in the event that it gets broken or damaged. Nothing ruins your AK like the charging handle sliding around loosely in the receiver so if you have a CM.028 that is worse for wear this affordable replacement part could be the key to fixing it up!

If your selector lever is looking a bit worn, or you have a fancy selector lever installed and you want to go back to the classic look, check out the M4/AR15 AEG safety selector from CYMA. A replacement original part, this fire selector should go straight onto any CYMA M4/AR15 AEG and will also fit many others! The selector set includes a fire selector blank plate for the right side of the receiver, selector cam, ball-bearing detent, and spring.

Not a fan of SMG-5 dioptre sights? I'm not sure how, but if they don't suit you then here's a way you can still shoot sharp with your SMG-5/MP5 AEG. Allows mounting of red dot sights and shorter length magnified optics. Looks extra cool with an MRDS on!

If you want to restore the factory fresh look to your workhorse AK, this part may be of use. The Rear Sight Block for the CM.04x Series is an original replacement part for AKM and AK74 rifles of the CM.04x series. This part will not work on AKS-74U AEGs, but should otherwise fit AKs which use the LCT style of construction. The sight block is constructed from alloy and comes with steel pins to mount it, and includes the handguard disassembly lever but does not include the rear sight or the rear sight leaf spring. The surface finish of this part is a rough textured finish which is a close match for the hard-wearing paint applied to Russian AK variants of the 1960s and onwards.

A spare or replacement Butt Pad/Plate for CYMA branded AK replicas. This is ideally useful for Rear-Wired models where the Battery is stored in the Stock and needs to stay locked in place. Whether you need a spare yet or not, this is an essential bit of kit for any AK owner with a Solid Stock.

If you are planning a modern SMG-5 build I have great news for you! You can ditch that dowdy old cocking handle and swap it out it with this ACR-esque modern replacement from CYMA. Made from sturdy Alloy and designed in a thoughtful way, featuring a lightening cut to keep weight down and grip surfaces where you need it, unlike the original. The CYMA extended cocking lever gives ergonomic advantages together with looking operator-af. Suits an M-LOK handguard perfectly!

If you have damaged your suppressor mount on your CM.041 SD AEG you may think you are out of luck, but thanks to CYMA expanding its line of replacement parts you can now swap the mounting apparatus out for a fresh new mount, and have your integrally suppressed SMG rocking its suppressor again!