
- Extremely Stable
- CNC Hop-Up Unit
- Precision Adjustment
A highquality replacement Hop-Up unit designed and created by Action Army to fit TM Spec VSR / BAR-10 Airsoft Bolt Action Sniper Rifles, to enhance and perfect the performance of the weapon.
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship all around world, with delivery not only to the UK, but to most of the EU and select Worldwide locations as well. We provide a working day by road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change, and are only a rough guide. For more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£4.95
Approx.
UK Next Day
£6.95
Approx.
Highlands / Islands
£12.99*
Approx.
EU
£12.99+*
Approx.
* Please note that Scottish Highlands, Islands and EU post prices can vary wildly. Prices range from £8.99, up to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The Hop-Up unit is CNC Machined for precision and accuracy, and is the anodized with a red finish. The Hop-Up unit is designed to improve the performance of your rifle by improving the Air Seal and Hop-Up adjustment mechanisms of a standard until, with the strength and rigidity of a Machined Alloy Hop-Up chamber. The Hop-Up unit provides a much better Air Seal over standard hop-up units thanks to its close attention to details and production tolerances, meaning less wasted Pressure and a more efficient Air Flow. The hop-up's adjustment arm is designed to allow for small adjustments to be made, and thanks to it's clever design it will hold its place too, even after lots of shots. Overall, the hop-up unit is designed to be more stable, being stronger and tougher, with less flex than a standard hop-up unit, along with the Inner Barrel Sleeve making your rifle more consistent than before. The hop also features adjustable BB retention nubs, which are made out of rubber and hold the BB in place ready to be fired. This hop-up unit is perfect for those who are looking for the perfect Aftermarket Hop-Up unit, designed to improve the precision of your rifle, or for those who want to swap out a stock hop-up unit for something a little more special.
Features:
- Replacement Hop-Up unit for TM Base VSR-10 Airsoft Bolt Action Sniper Rifles
- Great Upgrade / After Market Replacement Part
- High Quality CNC Machined Design
- Anodized Red Finish
- Improved Airseal over standard Hop-Up Units
- Improved Hop-Up Mechanism over standard Hop-Up Units
- Allen Key Hop-Up Adjustment
- Extremely Stable Hop-Up Adjustment Design
- Evenly adjusting Hop-Up Arm from a singular Adjuster
- Very tight seal against Hop-up Bucking and Air Nozzle
- Dual Adjustable BB Retention Nubs
- Uses VSR Barrels / Buckings
- Feeds BBs well
- Barrel Sleeve to hold the Barrel in place and reduce Horizontal and Vertical Movement
- Barrel Sleeve secured by 3x Grub Screw
Package Includes:
- VSR10 / VSR-10 CNC Aluminium Hop-Up Chamber
- Grub Screw / Spring / Parts Set
Special Instructions:
The Barrel Sleeve is secured by 3x Grub screw. The 2 Long Screws screw into the Sides of the hop-up unit, and the Short Screw screws into the Bottom.
We suggest that you use a Flat Hop-Up spacer, along with a 70-80 Degree Maple Leaf Hop-up Rubber for optimum performance with a high fps and heavyweight BBs.
Before installing please ensure that you are 100% clear on how to fit the hop-up unit, as Incorrect fitting will result in poor performance. For more help or fitting instructions please feel free to call the Workshop on: 01484 644709, or email: workshop@patrolbase.co.uk.
Specification
General
Internal Part Type
|
Hop-Up Unit
|
---|
Weight and Dimension
|
Approx. 0.075kg
|
---|---|
Product Length
|
Approx. 6.614cm
|
Product Width
|
Approx. 2.672cm
|
Construction
|
Red
|
---|---|
|
CNC machined aluminium, with rubber BB stopper
|
Internal Part Construction
|
Aluminium, Rubber,
|
Part Specific
Part for Power Source Type
|
Spring
|
---|---|
|
VSR / Bar10
|
Package Includes
|
Hop Unit
|
Size guide
Parts Fitting
Upgrades and Downgrades should only be undertaken by experienced players, or Airsoft Technicians. Please note, changing any internal parts of a weapon voids its warranty unless done in-house by our staff.
Please ensure that when fitting parts the part purchased is the correct part, as once a part has been fitted we cannot accept return.
We do know that players love to tinker, so we're here to give you help should you require it, and if needed you can get in touch with our workshop for more help!
Unique Parts
Please note that some parts may be unique to a specific brand of weapon. For example: Parts for an ASG M4A1 may not fit an ICS M4A1.
Parts from the same brand typically have a high chance of fitting, though be warned, some replicas use unique parts, so please ensure the part will fit before you attempt to fit it.
If you require help with fitting any parts feel free to get in touch with us via our Contact Us Page.
For more information with fitting parts, or should you require help, feel free to get in touch with our Workshop Department via our Contact Us Page.
Terms and Conditions relating to parts fitting can be read on our Terms and Conditions Page.
Need ideas for something extra?
- Special Putty
- Oils & Degreasers
- Cleaning Tools Included
A must have piece of kit for any Airsoft player or enthusiast. The kit comes with everything you need to keep your GBB and AEG weapons in top condition, giving you an edge over your opponents.
- 22,000 Shot Life
- 35 BBs Per Second
- GemTech Licensed
An AceTech Tracer Unit, which is concealed inside a fully licensed and CNC Machined Aluminium constructed replica of a GM-9 Suppressor from GemTech, a manufacturer of Suppressor for Real World Firearms. The internal LiPo battery can last for up to 22,000 shots, and can keep up with up to 35 BBs per second for maximum performance.
- High Power Gas
- Metal Fill Nozzle
- Contains UPL+ Lubricant
Abbey Predator Ultra GAS is the perfect propellant for any gas weapon from pistols to high tech sniper rifles. It contains UPL+ lubricant which is designed to stay permanently mixed with the propellant.
- Polymer construction
- 1200rnd Capacity
- Auto winding drum magazine for M4/AR15 AEG
Looking for some extra firepower to keep the enemies' heads down as you advance? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high density polymer with a modern design aesthetic, making it perfect for practically any M4/AR15 Airsoft AEG, especially those leaning into a more aggressive look, or those looking to sample the support weapon playstyle. This magazine is an auto winding design which requires 3x AAA batteries to operate.
- 3MOA Target Dot
- Special VE Warranty
- Super Clear Sight Picture
An ULTRA compact, Full Metal 20mm / Pistol Weaver red dot sight designed for use on pistols / short dots & LPVO's as an RMR or as a back up sight. It has a 3MOA target dot and auto adjusting brightness levels according to your environment lighting.
This product is covered by the Vector Optics Lifetime warranty, for more information please read below.
- 1kg bulk bag
- Choice of BB Weights
- High quality - Great value!
For those of you who have a heavy trigger finger, LMG users, or the thrifty bargain hunter, we finally have a "cheap" BB which we can approve of! The ASG Cursed BBs are a high quality polished BB with absolutely no surface imperfections, seam lines, or injection pin marks, and despite this level of quality you can spray and pray all day long at this bargain price!
- 1KG Resealable Bag
- 5.95mm +/- 0.01mm
- Competition Grade BB
These 0.28g BB's created by G&G (Guay Guay), who create a range of high quality BB guns and related products, with these BBs being some of the highest quality in the sport.
- Play For Longer
- For Omega CO2
- Holds 2 x 12g CO2
This is a spare or replacement CO2 Cradle for the Tippmann Omega PV Series with a CO2 Stock. It holds two 12g CO2 Sparklets which lasts for hundreds of shots, but will need refilling with CO2 once empty. Having a spare allows you to quickly change out the cartridge rather than opening it up and replacing the CO2 Bulbs. This is a direct replacement, that is exactly the same as the one supplied in the original box. If you want to stay in the field playing for longer, rather than sacrificing your sweet position and returning to the safe zone, then this is a must-have purchase.
- White BBs
- 0.32g in Weight
- Approx 3300 BBs
NUPROL's latest offering into the Airsoft Market with newly designed BBs made to be more accurate and consistent that ever before, with a strict tolerance of 0.01mm per BB.
- Weaker Than Ultra Gas
- Ideal Summer Gas
- 700ml Content
A very popular selling gas especially during summer and in countries that have a warm climate. This gas really is a low power gas. It has a high silicone content, so you will need to clean your GBB Airsoft weapon more frequently to ensure longevity.
Stocked and used by our Patrol Base workshop and other staff members for years, each can has 700ml of contents and can be used to reduce output power of a hot gas gun, or ensure smooth silky operation of a Polymer slided pistol.
- 3-9 x 40E Zoom
- High Mounts Included
- Illuminated Cross Optic
An upgraded optic over the traditional standard 3-9x40 alternative. The E version comes with illumination settings with adjustable Red levels of brightness. Also included is a 5cm long sun shade that comes pre fitted within the box.
- Biodegradable
- 1kg Resealable Bag
- 5.95mm +/- 0.01mm
A 1KG bag containing approximately 4000 high quality biodegradable competition grade Airsoft BBs, constructed from Polylactide (PLA) which degrades in around 60 days, and are polished to provide a smoother aerodynamically enhanced external surface.
- 30ml Content
- Great Lubricant
- Easy Drip Nozzle
Stocked and used by our Patrol Base workshop and other staff members for years. Easy to store and use with the lockable pop on lid you can store this in a rucksack or bag without over worrying the contents may spill out during transit or storage.
- Bottles or Bags
- 0.20g Standard BBs
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are standard 0.20g BBs which are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.
- White BBs
- 0.28g in Weight
- Approx 3300 BBs
High quality medium-weight 0.28g Airsoft BB Ammunition, suitable for both indoor CQB Airsoft and outdoor open environments.
These BBs are perfect for any Airsoft Skirmisher looking to up their gameplay without having to invest time and money into upgrading and modifying their Airsoft gun, in addition to those looking for their next go-to brand of BB, and for those looking for a more reliable and consistent BB.
- 12g Capacity
- Single CO2 Bulb
- Steel Construction
A 12g CO2 Bulb Capsule Single, sold individually these 12g bulbs can be used for both Airsoft and Air rifles.
- White BIO BBs
- 0.30g in Weight
- Approx 3300 BBs
NUPROL's latest offering into the Airsoft Market with newly designed BBs made to be more accurate and consistent than ever before.
- Screw Top Lid
- 3300 x 0.25g BBs
- 0.01mm Tolerance
A screw-top bottle that contains 3300 high quality, competition-grade 0.25g BBs from ASG, which are carefully selected to make the cut for the 'Devil' series - a premium range compared to the standard Blasters. They are made with a fine Tolerance of 0.01mm to ensure optimal performance in all Airsoft Guns. The 0.25g BBs are a great option for those playing outdoors, particularly if you have a high speed gun and want to keep overall BB costs down whilst maintaining top-tier performance.