Electro River | Airsoft Batteries

This battery features a wider and flatter butterfly style configuration and while it won't fit in crane stocks it is perfect for larger areas such as AR36 handguards and full stock rifles. The battery has a voltage of 7.4v, a capacity of 1500mAh and a continuous discharge rate of 20C with a maximum discharge rate of 40C. The battery is connected to your AEG via the Mini-Tamiya connector, not to be confused with a Deans connector, however adaptors are available.

The battery consists of two cells working in tandem with each other, with each cell measuring 8.5x0.6x3.4cm with a cable length of roughly 9cm.

If you run a front-wired AEG with limited battery space, storing your battery in a PEQ-15 battery box could be the solution! This 7.4V 850mAh 20C LiPo battery from Electro River is designed to fit into cramped spaces and is the perfect size for use in a PEQ-15 battery box. The battery measures  5.5 x 3 x 1.5cm approximately, and the wire length between the cell group and connector is approximately 11cm.

The compact size of this battery makes it great for both Airsoft and any other electronics projects you have on the go, providing plenty of juice in a smaller form factor. The continuous discharge rate of this battery is 20C, and its peak is 60C, giving you a nice snappy response without overdoing things!

An essential for hobby batteries, whether they're LiPo, NiMh or LiFe, the Electro River Battery Safe Charging Bag - NiMh/LiPo/LiFe is the best way to stay safe when storing or charging batteries. Made from a Kevlar fibre designed for fire resistance, this bag is designed primarily for lithium batteries and can fit several inside. Don't take the chance; make sure your batteries live in a bag like this and NEVER leave batteries on charge unattended. 

If you just got a new Airsoft platform, and it has a Deans connector, but all your batteries are for mini-tamiya, don't fear! The Electro River Deans to Mini-Tamiya Converter Wire connects to your Airsoft gun's Deans connector and then provides the appropriate connector so you can use mini-tamiya batteries.

This is great for saving a bit of money; instead of buying new batteries, you can just convert your platform's connector!

If you want to keep your batteries healthy and never get caught out with a dead battery mid-firefight, the Electro River LiPo Voltage Alarm is the perfect addition! Designed to mount to the balance connector found on LiPo & Li-Ion batteries, this nifty device warns you when the voltage drops too low, helping you avoid killing batteries by providing an audible beep to signal that playtime is over. 

Two variants are available: the V1, which is a simple audible alarm, and the V2, which includes an LCD display to provide a voltage readout, along with an audible alarm when the voltage drops too low. 

If you want to keep your batteries healthy and never get caught out with a dead battery mid-firefight, the Electro River LiPo Voltage Alarm is the perfect addition! Designed to mount to the balance connector found on LiPo & Li-Ion batteries, this nifty device warns you when the voltage drops too low, helping you avoid killing batteries by providing an audible beep to signal that playtime is over. 

Two variants are available: the V1, which is a simple audible alarm, and the V2, which includes an LCD display to provide a voltage readout, along with an audible alarm when the voltage drops too low. 

If you have an old Airsoft platform and want to bring it into the 21st century, this converter wire might come in handy! The Electro River Large-Tamiya to Deans Converter Wire will plug into your large-Tamiya gun, such as some old Tokyo Marui platforms, to a Deans battery, one of the most common Airsoft connectors in the modern day.

This converter wire also adds some extra length to your Airsoft platform's wiring, which can be useful for fitting Airsoft batteries in better positions, such as an M4 crane stock.

If you're looking for a big battery which fits in a Crane stock, this will do it! The Electro River 7.4V 2600mAh 20C LiPo Crane Battery (Mini Tamiya) is a 2-cell 7.4V LiPo arranged in Crane/nunchuck configuration, ideal for M4/AR-15 Crane stocks (and similar battery stocks), fixed stocks and large handguard battery compartments. 

This battery measures approximately 1 x 2 x 12.5cm per cell group and features 10cm of wire length, giving you extra flexibility to fit the battery in the right spot. It is pre-wired to a Mini-Tamiya battery connector and a LiPo balance plug for charging. Please note, you will need a LiPo balance charger to charge this battery, and it must always be charged with the balance plug connected to the charger. 

If you have other hobbies, such as RC car driving and want your Airsoft platforms to run on the same battery connector for convenience, then this is for you! The Electro River Deans to Large-Tamiya Converter Wire attaches to your Airsoft platform's Deans connector and allows you to use Large Tamiya batteries with it. Whilst these battery connectors are less common, they are much more popular in all RC (remote control) hobbies.

Deans gun to large tamiya battery

If you are looking for the biggest battery you can fit in an M4/AR-15 buffer tube this would be it! The 7.4v 2000mAh 15C LiPo Stick Battery from Electro River just about fits in an M4/AR-15 buffer tube, though we recommend you do not fully collapse the stock once it is installed.

The battery measures 12.6 x1.6 x 2cm and should also be suitable for top-wired AK AEGs and will fit in almost all fixed stock battery compartments regardless of the platform. The wire length between the connector and cell group is approximately 9cm and the continuous discharge rate is 15C with a peak discharge rate of 30C.

If you're the techy type or want to move to Deans connectors for improved electrical efficiency, the SHS Deans/T-Plug Connector Set is calling your name! Both male and female connectors provide a strong connection and ultra-low resistance, ideal for Airsoft AEGs, RC vehicles, Drones, and other electronic hobbies.

As it pertains to Airsoft, the Male connector should be on the gun side and the Female on the battery side. Make sure you pay attention to polarity when installing either of these, and if you're unsure, consult a tech!

If you have an old Airsoft platform and want to bring it into the 21st century, this converter wire might come in handy! The Electro River Large-Tamiya to Deans Converter Wire will allow you to connect your large-Tamiya gun, such as some old Tokyo Marui platforms, to a Mini-Tamiya battery, one of the most common Airsoft connectors in the modern day.

This converter wire also adds some extra length to your Airsoft platform's wiring, which can be useful for fitting Airsoft batteries in better positions, such as an M4 crane stock.

Charging Airsoft batteries always carries a small risk, and when things go wrong, they can go very wrong. The Electro River LiPo Safe Charging Case helps reduce the risk of damage in the event of a battery failure, and it’s a lot cheaper than repairing your home.

Designed for Lithium batteries such as LiPo, LiFe and Li-Ion, this safety case can also be used with other battery types. It’s made from fire-retardant woven fabric and fibreglass to help contain flames and heat if the worst happens.

Battery fires are rare, but they’re not something you want to gamble on. Add the Electro River LiPo Safe Charging Case to your charging setup and charge with confidence.

If you need a slim stick battery for your ASG Scorpion, M4/AR-15 AEG buffer tube or top-wired AK AEG this will do the trick! The Electro River 7.4v 1200mAh 25C LiPo Stick Battery measures approximately 11.5 x 1.4 x 1.5cm which makes it perfect for rear wired M4 platforms with the standard buffer tube battery compartment, top wired AKs which house their battery beneath the top cover and SMG-5K platforms. The battery is pre-wired to a Deans connector and the length of wire between the cell group and the connector is approximately 9cm.

The battery is a 7.4V 2-cell battery in stick configuration with a continuous discharge rate of 25C and a maximum discharge rate of 50C, making it great for almost any Airsoft AEG and a perfect fit for the ASG Scorpion EVO 3A1, though make sure you measure before ordering!