Airsoft Stocks

A spare or replacement stock with internal battery space for Airsoft replica M4 / M16s AEGs, or other Airsoft guns with an AEG Spec Buffer Tube. It is constructed from polymer with a rubberised butt plate. The stock features a rear battery compartment which is accessible when the butt plate is removed which allows the fitting of a Nunchuck configuration battery, such as this.

The stock features rear loopholes for two-point sling setups, as well as a rubberised butt plate for enhanced hold when shouldering your weapon. To fit the stock the pin which is below the adjustment handle should be pulled fully out, then the stock will simply slide onto the buffer tube, this can be done either by Hand or with a pair of Pliers. The stock is a great replacement part for M4 Airsoft rifle project builds or simply as a replacement for an already damaged part.

A spare or replacement stock with internal battery space for Airsoft replica M4 / M16s AEGs, or other Airsoft guns with an AEG Spec Buffer Tube. 

A spare or replacement stock with internal battery space for Airsoft replica M4 / M16s AEGs, or other Airsoft guns with an AEG Spec Buffer Tube. 

A seriously tough Stock for Airsoft AR/M4/M16 replicas, which attaches to an AEG Buffer Tube and features an adjustable Cheek Rest, QD Sling Sockets and removable Butt Pad w/ secret storage area.

If you're checking out alternative stock options for your M4/AR-15 AEG, the Delta Armory M4/AR-15 Battery Stock & Buffer Tube Set should be on your radar. This stock is the same offered on Krytac Trident and Delta Armory AEGs, boasting QD sling sockets on each side, a conventional sling loop in the centre and a comfortable and grippy rubber butt plate for traction in all weather conditions. 

Like the "Crane" stock, the Delta Armory battery stock has a comfortable sloped cheekpiece, but unlike the Crane, the Delta stock has texture along the top for comfort and grip, encouraging a consistent head position when shooting. The highlight of this stock design is its enlarged battery compartment, offering longer battery tubes than the Crane and more space around the sides, allowing for larger LiPo batteries to be installed. If you want a longer-lasting battery and your AR AEG has a buffer tube, this is the stock for you!

A very clever little replacement adjustable stock designed to enhance the ergonomics of M4 and M16 type Airsoft Electric Guns and make your Airsoft gun more controllable. 

A very clever little replacement adjustable stock designed to enhance the ergonomics of M4 and M16 type Airsoft Electric Guns and make your Airsoft gun more controllable. 

A Polymer Solid Stock for SMG-5 replicas, which easily bolts on to SMG-5 Airsoft Guns to provide a stable aiming platform and a large battery compartment if your AEG is rear wired.

If you need more battery space but want to keep your M4/AR-15 AEG slim on the sides, the CYMA Adjustable Whale Stock is just the thing. This sliding stock is designed for M4/AR-15 buffer tubes and offers a fantastic alternative to common Crane stocks used for rear-wired AEG setups. 

The advantage of the Whale Stock over the Crane is its slim profile, avoiding the side bulges of the Crane stock in favour of a larger stock "toe" for battery storage. This means you can use a much larger battery than would fit in a buffer tube but still enjoy the slim, snag-free profile of more slimline AR stocks. 

The Whale Stock also features a QD sling socket on each side, ready for a QD sling swivel, along with a conventional sling loop at the toe of the stock for hook or strap-style slings. If you want a new look for your buffer tube-equipped AR AEG but refuse to surrender your massive battery, the Whale Stock is what you need!

A Polymer constructed Sliding/Collapsible Stock for AR Platform M4/M16 replicas, which can be set to multiple lengths on the Buffer Tube, and comes included with both a thick and thin Rubber Butt Pad.

Want to make your Airsoft rifle more comfortable? An enhanced stock is what you need! The Specna Arms Crane Enhanced Carbine stock is constructed from high-density polymer, with steel QD sling sockets on either side, a steel adjustment pin and a rubber butt plate for added grip in all weather conditions. This stock is easy to install and simply requires you to lift the adjustment lever up and slide the stock onto your buffer tube. This stock will fit any AEG spec M4/AR15 buffer tube, including M4/AR15 stock adapters for Airsoft AK AEGs, SMG-5 and AR36 AEGs.

A Polymer constructed stock which is tough, made from dense materials and is reminiscent of the Amoeba stock due to the easy access spring-loaded door which gives access to the battery compartment.

If your primary weapon is boasting a 1913/20mm Picatinny stock setup you now have some fresh new stock options thanks to 5KU! The 1913/20mm Picatinny Folding Skeleton Stock w/Folding Butt Plate is designed to mount to any 20mm Picatinny rail, but please, don't mount it to your handguard!

The stock itself is constructed from aluminium with weight reducing cuts throughout, and the folding/mounting mechanism is constructed from steel to provide the prerequisite strength. This stock is ideal for super compact setups with its folding butt plate, and its raised cheekpiece provides superb sight alignment. This stock can be mounted directly to the Sig Air MCX or MPX, or any AEG with a 1913/20mm stock adapter, providing an ultra-compact solution when folded, with full functionality when deployed! Get this on your MPX, it deserves it!

If you're running your AAP-01 or AAP-01C as a primary, the Action Army Folding Stock Kit for AAP-01 GBB Pistols provides an extra point of contact for improved accuracy and range and looks fantastic as a bonus! This sleek, minimalist folding stock kit is compatible with the AAP-01 and AAP-01C from Action Army, mounting via the hammer housing pin & rear sight. 

The stock offers length of pull adjustment, an adjustable cheek riser and side folding functionality, making it the equivalent of a SCAR or ACR stock but with a far more compact design well suited to the lightening fast AAP-01. Also moulded as part of the stock base we have a 20mm Picatinny optics rail, allowing you to mount a red dot sight or scope to your AAP to enhance its functionality as a primary. 

Steel QD sling sockets are present on either side of the toe of the stock, along with an additional socket beneath the stock mount, ideally placed for single-point slings. If you love the way your AAP-01 shoots but want to extend your effective range and turn it into a mean little carbine, the Action Army Folding Stock Kit for AAP-01 GBB Pistols is what you need to get the job done!

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

Looking to make your SMG-5 AEG even more compact? Perhaps you had an accident with your previous stock and need a replacement? Here it is, and at a price that makes sense even for a more affordable SMG-5.

If you're running an MPX, MCX or 1913/20mm stock interface-equipped platform and want a shorter length of pull for CQB, the Airsoft Artisan 1913/20mm Picatinny Shorty Stock is what you need. This CNC Aluminium stock boasts a skeletonised design to maintain the perfect combination of low weight and strength and is shorter than most 1913/20mm stocks, ideal for use with bulky body armour vests and plate carriers.

Built into the design of the Shorty stock, we have a pair of QD sling sockets, one on either side, ready for QD sling swivels to be added. The butt plate is serrated and made from grippy rubber, ensuring the handling of your platform stays top-tier, even in wet weather conditions.

Compatibility-wise, this stock fits SigAir MPX and MCX platforms and will also be compatible with aftermarket 1913/20mm Picatinny adapters for M4/AR-15, SCAR, AK, SMG-5, EVO, MP9 and more. If you need a stubby stock for close-quarters encounters, the Airsoft Artisan 1913/20mm Picatinny Shorty Stock for MPX/MCX/1913 Interface is the perfect tool for the job!

Treat your M4 to this Arcturus advanced stock. Constructed from high density polymer, with an angular design and flat textured and rubberised butt plate, this stock is both comfortable and has a sleek, smooth aesthetic that's sure to complement the look of your AR platform.

This stock is for AEG buffer tube, the adjustment lever is contained within the A-frame of the stock, to reduce snagging.

If you are looking for a new stock, but it needs to be able to house a battery, you are in luck! The Krytac M4/AR15 Battery stock is constructed from high-density polymer with a steel adjustment pin and steel QD sling points on either side. Perfect for those who are bored with the super common crane stock look!

A multi-position Sliding Stock for AEG Buffer Tubes, that is designed to look like the Stock that comes supplied on the AK-12 and AK-15 rifles. It is constructed from a tough Polymer and is easily installed by squeezing the Stock Adjustment Lever and sliding it over the Buffer Tube. There is a QD Sling Socket on either side of the Stock for the connection of a Quick Release Sling Loop, and a thick Rubber Butt Pad provides grip and comfort in the shoulder.

An Airsoft replica of the classic M16 style fixed solid stock, designed for use on Airsoft 6mm BB replica M4s, M15s and M16 AEGs. Just like the real stock this replica is based on, the CYMA stock is constructed from dense polymer to create a lightweight and rugged firing platform.

A lightweight and low profile stock for M4 Platform Airsoft Electric Guns which have an AEG style Buffer Tube at the rear. If your motto is 'High Speed, Low Drag', then this stock is perfect for you.

This slim profile Stock is designed for AR / M4 platform Airsoft Electric Guns, and will attach to any kind of AEG Buffer Tube. There is no dedicated Battery Compartment on this Stock, so you will need to fit your Battery inside the Buffer Tube of your gun. The Rubber Butt Pad is removable to make Battery installation easier; simply pull back the tiny tab on the underside and pull the Pad downwards.

If you are in the mood to build your own Honey Badger or PDW style M4/AR-15 this stock is an essential part! The CYMA PDW Stock for M4/AR-15 AEG fits the standard M4/AR-15 AEG rear receiver interface, replacing your usual buffer tube with a more compact alternative with a sliding stock mechanism built in.

The buffer tube in this set is constructed from alloy and the stock bars and locking latch are constructed from steel to provide strength and realistic weight. The butt plate is constructed from high density polymer with linear serrations to promote grip, and the set also includes the bolt and washer required to mount the stock. If you want to shorten your M4/AR-15 up for CQB duties, this is what you need!

If you're working on an old-school AR build this stock would be perfect! The CYMA CAR15/XM177 Old-school Stock for M4/AR-15 is based on the original XM177 sliding stock but is constructed from a modern high-density polymer, offering weight savings and improved strength while keeping the old-school aesthetic. The adjustment lever is on the bottom, as it is on most M4/AR-15 stocks, and the stock also includes a sling slot/loop built in, ideally suited for strap slings and paracord slings. The stock should fit almost any M4/AR-15 buffer tubes, including both AEG and GBBR types.

Those building a Blackhawk Down or Blood Diamond style AR platform; this stock is what you need to have your build looking perfect. If you are building an L119A1, this stock is also a fantastic stand-in for the "Fiberlite" stock used on the platform in its early life, and while not 100% perfect, most won't notice the difference!

If you want a new look for your M4/AR-15 AEG a new stock is probably the easiest way to do it! The VLTR Style Clubfoot IMOD stock from CYMA is an enhanced stock design with a Crane stock sized battery compartment built in and aluminium QD sling sockets on either side. The set includes the IMOD stock, a 6-position M4/AR-15 buffer tube and the mounting bolt and spacer so you can fit the stock as an alternative to fixed stocks and PDW stocks. This is why they call the M4 platform "Barbie for men"!

Is your AR stock too long? Maybe you carry a PDW AR15 AEG as a secondary but don't fancy the additional weight of a PDW sliding stock? The CYMA ultra-compact M4 stock may well be what you have been searching for.

This fits on a normal AR15 buffer tube but is optimized for use with a shortened buffer tube, making it even more compact. The butt plate can be removed similarly to a full-sized crane stock if you have a small enough battery to fit inside this lil' guy! This would also work well with a battery sling.

If your primary weapon is boasting a 1913/20mm Picatinny stock setup you now have some fresh new stock options thanks to 5KU! The 1913/20mm Picatinny Folding Visor/Respirator Stock is designed to mount to any 20mm Picatinny rail, primarily those found on MPX and MCX rifles, and other AEG/GBB primaries with 1913/20mm Picatinny stock mounting apparatus. Feel free to mount it to any rail on your AEG, but don't blame us for the funny looks!

The stock body is constructed from aluminium to keep the weight low, and the butt plate is rubber with linear texture to promote positive grip, with or without body armour. The folding/mounting mechanism is constructed from steel to provide the strength needed, and the QD sockets on either side of the stock are also steel, and fully functional. The Visor/Respirator stock is designed specifically to provide perfect sight alignment when wearing bulky face gear, allowing you to see down your optic without requiring a riser and increasing height over bore.