All Airsoft Submachine Guns

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

The VMP-1 platform is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1 makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor mounting system built into the muzzle itself.

If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1 is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!

The first Airsoft replica of an AR-9, the real-steel AR15 rifle receiver chambered in 9mm pistol ammunition. AR-9 pistols and carbines have become extremely popular in the United States, due to their modularity, familar AR15 style controls, and compact nature. The G&G ARP9 is constructed from high-density polymer with an aluminium M-LOK handguard and includes a compact PDW stock, making this AEG a great choice as a CQB primary for those who want a more modern, high-speed submachine gun with an aggressive design aesthetic.

The first Airsoft replica of an AR-9, the real-steel AR15 rifle receiver chambered in 9mm pistol ammunition. AR-9 pistols and carbines have become extremely popular in the United States, due to their modularity, familar AR15 style controls, and compact nature. The G&G ARP9 is constructed from high-density polymer with an aluminium M-LOK handguard and includes a compact PDW stock, making this AEG a great choice as a CQB primary for those who want a more modern, high-speed submachine gun with an aggressive design aesthetic.

The first Airsoft replica of an AR-9, the real-steel AR15 rifle receiver chambered in 9mm pistol ammunition. AR-9 pistols and carbines have become extremely popular in the United States, due to their modularity, familar AR15 style controls, and compact nature. The G&G ARP9 is constructed from high-density polymer with an aluminium M-LOK handguard and includes a compact PDW stock, making this AEG a great choice as a CQB primary for those who want a more modern, high-speed submachine gun with an aggressive design aesthetic.

If you have got your eye on an AR-9, Lancer Tactical just made the choice that bit harder! The LT-35 Battle X 9mm PDW is intended to be a lightweight platform for aggressive run and gun playstyles and is equipped with Lancer's Gen.2 internals, including a high torque motor, 6.03mm tightbore inner barrel and a well equipped version 2 gearbox with some choice reinforced parts.

The LT-35 is constructed almost entirely from high density nylon polymer, making it as solid as a rock and as light as a feather; a sure choice for any skirmisher who likes to move fast with minimal baggage. Its modern external design wants for nothing in the realm of accessorising, offering a railed receiver, M-LOK handguard and 14mm CCW male threaded barrel, meaning options are endless when it comes to kitting the Battle X out. The ARP9 looks worried!

If you have got your eye on an AR-9, Lancer Tactical just made the choice that bit harder! The LT-35 Battle X 9mm PDW is intended to be a lightweight platform for aggressive run and gun playstyles and is equipped with Lancer's Gen.2 internals, including a high torque motor, 6.03mm tightbore inner barrel and a well equipped version 2 gearbox with some choice reinforced parts.

The LT-35 is constructed almost entirely from high density nylon polymer, making it as solid as a rock and as light as a feather; a sure choice for any skirmisher who likes to move fast with minimal baggage. Its modern external design wants for nothing in the realm of accessorising, offering a railed receiver, M-LOK handguard and 14mm CCW male threaded barrel, meaning options are endless when it comes to kitting the Battle X out. The ARP9 looks worried!

An Airsoft 6mm replica SMG-5 SD6, manufactured by Jing Gong. Comes supplied with an integrated suppressor for looks and to slightly dampen muzzle report.

If you're in search of a lightweight and high performance platform with the AR-9 aesthetic, the G&G ARP9 2.0 Enhanced Combat Machine AEG can't have escaped your scrutiny! This is the second generation of G&G's superb ARP9 platform, boasting several internal refinements for even more performance and an external overhaul including the G&G GOS-V9 PDW stock and a new CNC aluminium M-LOK handguard.

We think this is the best-looking ARP9 variant yet but also offers more attachment interfaces thanks to its longer handguard and even better results downrange than its still respectable older sibling. Internal improvements include a new generation of ETU and MOSFET made more efficient and compact than ever before, a further reinforced gearbox shell, a redesigned bevel gear to reduce heat build-up and a double O-ring nozzle to enhance air seal qualities. Also present is G&G's latest rotary HOP-up unit, bringing the ARP9 into line with modern Airsoft releases, offering improved setting retention and finer adjustment increments.

The original ARP9 was famously the winner of the Airsoft Players Choice Awards for best AEG several years on the trot and in our assessment, the second generation is even better. If you're after a lightning-fast CQB platform which handles like a dream and gives the enemy team nightmares, the G&G ARP9 2.0 Enhanced Combat Machine AEG is what you need!

The JG M5 SD5 is an integrally suppressed SMG-5 AEG featuring a polymer body and full sized battery stock. A very popular style of Airsoft rifle due to its widespread use by sneaky types of many militaries, great for some discrete CQB kills! 

For a machine pistol it doesn't get more compact than this! 

Perfect for those tightly spaced CQB environments. Used in such Hollywood films such as Taken and Air Force One, this iconic SMG is instantly recognisable and makes for a great Airsoft replica.

This variant comes with a quad 20mm RIS / RAS rail on the front handguard with the top rail extending along the length of the top of the gun, so you can customise to your hearts content with a variety of accessories.

With full metal construction, this replica has a realistic feel to it and is a great choice for beginner and veteran Airsofters alike.

Amidst the endless droves of pistol calibre carbines and SMGs currently being released, G&G present the MXC-9 to reassert its dominance in the field of CQB Airsoft platforms. The MXC-9 is constructed from high density polymer with a CNC machined aluminium handguard, and makes use of G&G’s superb G2 gearbox, complete with programmable fire controls allowing for 3 round burst.

In the looks department, the MXC-9  is largely based on G&G’s PCC45, and is even compatible with PCC45 magazines, but blends the receiver style of the PCC45 with a shorter handguard, sound amplifying muzzle device and a newly designed multi-position folding stock. Consider this the lovechild of the MCX and PCC45, with the frightening performance of the ARP-9 and SSG-1’s G2 gearbox!

A compact Airsoft Electric Pistol which is a replica of the CZ VZ-61, the perfect backup to another gun or as a Primary Gun for Close Quarter Scenarios.

An Airsoft electric powered 6mm SMG-5K replica with a full metal construction; the best friend to any close protection worker, movie bad guy, SAS operative or secret agent on skis!

The insanely iconic SMG-5K, popularised by movies as being every bad guys SMG of choice. This replica has an Alloy body to bring it to a realistic weight, and features a folding stock to make it more useful both indoors and outdoors.

The tactical option for MP5 lovers far and wide; whether you want to attach the included foregrip or your own optics, torches, lasers this Airsoft 6mm electric powered replica has you covered.

The sneaky counterpart to the Bolster Tuned CM.041 upgraded SMG-5 AEGs has returned and it's better than ever! Enter the CM.041 SD5 SMG-5 Upgraded Edition; a full metal SMG-5 SD5 replica built by the same team behind the ultra-high-end Bolster Armouries AEG series and previous Bolster Tuned AEGs.

As with its less discrete brethren, the first thing the Bolster Armouries team do with the CM.041 SD is to tear it to pieces and build it back up to fulfil its true potential. This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, and a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware.

The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a 4UANTUM Friction Pro High-Performance Hop Up Bucking was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused to increase the strength of the shell to withstand the force of repeated piston impacts, and the bearing holes in the gearbox shell have been smoothed out. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the Bolster Tuned CM.041 SD5 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 SD to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041 SD! 320 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

An Airsoft 6mm BB firing electric AEG designed in the style of the MP5 used by Special Forces around the world. Featuring a lightweight and durable Polymer external construction, this a RIF for those who like to stay light and fast on their feet.

If you're after a unique CQB primary or high rate of fire secondary to complement your sniper rifle or LMG, the G&G PRK9 (S) Nano Draco AEG is one to watch. Styled after real steel AK pistols and boasting full metal construction, the PRK9 feeds from unique 9mm style magazines showcasing mock rounds through its clear polymer shell for maximum realism.

Inside, we're equipped with the proven G&G GT Advanced series internals, making the PRK9 11.1V LiPo-ready straight out of the box. The gearbox shell is alloy and well-machined throughout, the 18:1 steel gearset runs on 8mm ball bearing bushings and the whole setup is driven by the renowned G&G Irfit 25K Orange high-speed motor, resulting in a super-snappy trigger response and way above average rate of fire. G&G's programmable MOSFET/ETU system also features inside, ensuring your electrical components run at maximum efficiency and offering the option to run 3-round burst mode instead of full auto.

Externally, the PRK9 (S) is ready to rock with the most modern attachments and accessories, equipped with a 20mm Picatinny railed handguard and receiver, 1913/20mm Picatinny stock interface and 14mm CCW male threaded barrel, ready for a tracer unit or suppressor. If you love the way the legendary ARP9 shoots but you prefer AKs, the PRK9 (S) Nano Draco AEG is the ARP9 in an AK suit!

The UMG models are great, but wouldn't it be great if we just had something a little more modern? Introducing the G&G PCC45, the 21st Century rendition of the very tired UMG style platform.

If you love the AR-9 SMG look but partake in a mix of CQB and woodland skirmishes, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG is a fine choice! Made from strong high density polymer with Specna Arms' unique receiver design, the SA-FX02 is the mid-length alternative to the FX01, equipped with a 10.5-inch outer barrel and sound-amplifying muzzle device, offering improved performance at longer range and a menacingly loud "pop" each time the AEG is fired.

Inside, the HAL¹ MOSFET/ETU system provides functionality rarely seen in AEGs at this price. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original FLEX™ AEG series, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

An ultra-light and agile build front to back, the FX02 is ideal for those who prefer slimmer AR-9 magazines but seek a more multi-role platform than comparable CQB-optimised AR-9s. Whether this will be your first foray into the Airsoft world or you're an experienced skirmisher seeking a lightweight but advanced backup, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG has both boxes ticked!

If you're looking for an ultra-compact CQB primary and you're an AK kinda guy, the G&G Armament PRK9 RTS Nano Draco AEG belongs in your arsenal! This full metal beast is inspired by real steel AK Draco pistols, the PAK-9 Pistol and the PP-19 SMG, the result being absolutely unique! A squat, menacing AK-derived design, the PRK9 feeds from unique 9mm style magazines showcasing mock rounds through its clear polymer shell for maximum realism.

Inside, we're equipped with the proven G&G GT Advanced series internals, making the PRK9 11.1V LiPo-ready straight out of the box. The gearbox shell is alloy and well-machined throughout, the 18:1 steel gearset runs on 8mm ball bearing bushings and the whole setup is driven by the renowned G&G Irfit 25K Orange high-speed motor, resulting in a super-snappy trigger response and way above average rate of fire. G&G's programmable MOSFET/ETU system also features inside, ensuring your electrical components run at maximum efficiency and offering the option to run 3-round burst mode instead of full auto.

On the outside, this lil guy is very well equipped, rocking a 20mm Picatinny railed handguard, railed receiver top cover, 14mm CCW male threaded barrel and side folding AR buffer tube with the G&G GOS V4 sliding stock. If you've been tempted by an ARP9 thanks to its fantastic performance but prefer the AK look, the G&G Armament PRK9 RTS Nano Draco AEG will suit you perfectly!

If you always wanted an MPX but you want it to shoot as good as it looks, this is the one to go for! The Bolster Tuned Sig Sauer MPX Upgraded AEG is based on the SigAir MPX but has all the creases ironed out, and is thoroughly upgraded on the inside with some of the best parts in the business.

Inside, you will find the phenomenal Gate TITAN MOSFET making its first appearance in a Bolster Tuned build, providing exceptional trigger response and rate of fire while adding a plethora of customisation options and eliminating the potential of trigger contact corrosion. The TITAN is paired with a Warhead 27K Base Brushless motor for guilt-free full auto mayhem thanks to its low heat build-up and exceptional reliability.

To make the most of the TITAN and Warhead combo, the team added Laylax EG 13:1 High-speed gears, further increasing rate of fire into the realms of the incredible. Laylax gears have a superb reputation amongst techs and were an essential replacement for the stock SigAir gearset. The Laylax Prometheus Purple HOP-up Rubber and Nub makes an appearance, as we might expect, and the usual Bolster Tuned internal polish and expert shimming process has also been carried out, with phenomenal results.

There is more going on with the Bolster Tuned MPX than we can list here (see the Full Description for more details), but check out our YouTube review to see this thing doing its good work. If you've been held back from buying an MPX because you have high standards when it comes to performance, this is the MPX for you!

If you're looking for a longer platform for outdoor skirmishing with no compromise when it comes to agility, check out the G&G Armament PRK9L Draco PCC AEG! Boasting full metal construction and a unique AK-based external design, the PRK9L is inspired by real steel Pistol Caliber Carbines popular in the 3-Gun competition sphere. Naturally, handling is impeccable, with all the ergonomic pitfalls of the AK truly cured, extended fire controls for speedy manipulation and an ultra-light extended M-LOK handguard well suited to modern shooting stances.

Inside, we're equipped with the proven G&G GT Advanced series internals, making the PRK9L 11.1V LiPo-ready straight out of the box. The gearbox shell is alloy and well-machined throughout, the 18:1 steel gearset runs on 8mm ball bearing bushings and the whole setup is driven by the renowned G&G Irfit 25K Orange high-speed motor, resulting in a super-snappy trigger response and way above average rate of fire. G&G's programmable MOSFET/ETU system also features inside, ensuring your electrical components run at maximum efficiency and offering the option to run 3-round burst mode instead of full auto.

As far as AK platforms go, the PRK9L is utterly unique, feeding from 9mm style magazines with sleek styling we're surprised an AK-derived design can pull off. If you need a real head-turner of a primary with killer performance and loads of accessory options, you can't go wrong with the G&G Armament PRK9L Draco PCC AEG!

The bringer of death makes an unexpected return! The OBIRE 2.0 Advanced PCC AEG marries dynamic, brooding styling with hand-tuned high-end internals, assembled with care by some of the most talented technicians in the industry. The proven pedigree of Bolster Armouries continues to amaze both end users and those downrange, landing consistent hits at 60 meters and beyond with an incredible rate of fire of 28 rounds per second. While the bar to entry is high financially, the performance you'll experience with a Bolster Armouries at your side is second to none.

Working with the SigAir MPX AEG as a starting point with the ultra-slick 3-Gun style Task Force Carbine Kit and Genuine MFT Battlelink Minimalist stock added, the OBIRE 2.0 has been externally and internally overhauled in true Bolster Armouries tradition. Almost none of the original internal parts remain inside; everything found to be suboptimal has been ripped out and replaced with high-end aftermarket parts from Gate Electronics, Laylax/Prometheus, RetroArms, Warhead Industries, Maple Leaf and FPS Softair. All parts are chosen after an extensive R&D process and tuned to perfection by the exacting techs of Bolster Armouries who simply cannot let anything less than perfection leave the workbench.

Standing on the shoulders of Airsoft giants such as the highly successful Bolster Armouries ONYX, ARKOSE, ATLAS, AEGIS and the original OBIRE AEGs, each OBIRE 2.0 platform is hand-assembled by the truly talented and dedicated Bolster Armouries technicians and tuned to perfection, providing the absolute pinnacle of Airsoft gun performance straight out of the box.

The Bolster Armouries dedicated after-sales service package supplied with each Bolster AEG has you covered for 24 months from the date of purchase, meaning the incredible performance standard set by the OBIRE 2.0 when you take your first shot is guaranteed to be maintained in the long term. If you are interested in the second generation of the slickest and quickest Bolster Armouries platform yet, the OBIRE 2.0 is ready whenever you are!

The VMP-1X is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1X makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor and mounting system built into the muzzle itself. Our VMP-1X SMGs have now arrived and are ready for dispatch, no need to hold your breath any longer!

If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1X is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!

The VMP-1X is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1X makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor and mounting system built into the muzzle itself. Our VMP-1X SMGs have now arrived and are ready for dispatch, no need to hold your breath any longer!

If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1X is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!

The VMP-1X is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1X makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor and mounting system built into the muzzle itself. Our VMP-1X SMGs have now arrived and are ready for dispatch, no need to hold your breath any longer!

If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1X is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!