KRYTAC MAXIM 9 | Patrol Base UK

If you need spare magazines for the KRYTAC Maxim 9 GBB you have found what you need! Like the original mag, these magazines are constructed with a lightweight aluminium shell which makes them far lighter than equivalent GBB mags, meaning you can carry more and move faster!

Each magazine holds 24 BBs and can be loaded either through the feed lips at the top of the magazine body, or through the feed channel at the front of the magazine by first pulling the follower down to the bottom. The gas fill valve is on the rear of the magazine and this magazine is designed for use with Green Gas. This magazine is the original mag supplied with the Maxim 9 and is also compatible with the UMAREX/VFC Glock 17 GBB, both gen.4 and gen.5 flavours.

If you have your ear to the ground on stealthy modern pistols, you will have heard about Krytac's SilencerCo Maxim 9!  A fully licensed replica, complete with immaculate SilencerCo trademarks and an absolutely flawlessly realistic look, the Maxim 9 is a real beast of a pistol with a style all of its own!

The Krytac Maxim 9 boasts full metal construction, an ambidextrous slide release and an ultra-ergonomic textured pistol grip with subtle finger ridges to help you control the pistol when shooting in its full auto fire mode. As it comes, the Maxim 9 is an exceptional Airsoft pistol and very competitive in the game, even more so with the Maxim 9 Tracer unit/Extension kit on board! 

If you have dreams of running your Maxim 9 GBB pistol with an integral tracer unit, your dreams can now become reality! The KRYTAC SilencerCo Maxim 9 GBB Tracer Unit/Extension Kit is designed to fit the KRYTAC Maxim 9 GBB pistol and extends the front end by approximately 3.1cm (not including the front piece) to accommodate the included Acetech muzzle flash tracer unit, though you can still mount the tracer without the extension kit.

The set includes an extension piece and wide front aperture constructed from aluminium, a pair of extended steel guide rods and the tracer unit itself. This is the perfect accessory to take full advantage of the KRYTAC Maxim 9's fantastic performance in a CQB environment!

If you have plans to build out a Krytac Maxim 9 as a primary pistol you will want this! The Krytac SilencerCo Maxim 9 GBB Pistol 20mm Picatinny Rail Kit provides a single 20mm rail which can be mounted to the KeyMod slots on the bottom of the Maxim 9 suppressor, and is the perfect length to look just right.

20mm Picatinny rails allow you to mount a laser aiming module or a tactical flashlight to your silent killer and assist your efforts in cleaning up the CQB site. For those who see the potential in the Maxim 9 to be the ultimate CQB tool, this rail kit will be an asset!

If you want to turn your KRYTAC Maxim 9 GBB into a true beast, a red dot sight is a great way to speed up your shooting and make the pistol more effective in low light. The KRYTAC Red Dot Optic Mount Plate for SilencerCo Maxim 9 GBB is designed to facilitate this. The plate is constructed from steel and mounts to the optic cutout on the top of the Maxim 9, providing optic mounting footprints in RMR, Sheild and RMR CC configurations. Make sure you check your red dot sight's mount footprint to ensure it is compatible before buying as not every micro red dot sight is!

If you're running the stunning KRYTAC Maxim 9, keep one of these handy for a worst-case scenario. The KRYTAC Loading Nozzle/BBU for SilencerCo Maxim 9 GBB Pistol is a replacement original part made from high-density polymer.

The Loading Nozzle/Blowback Unit is the part which loads BBs from your magazine into the HOP-up unit and is also responsible for directing gas to shoot and cycle the slide. Whether your Maxim 9 no longer feeds or you want to keep it running for eternity, this part is essential to have in the stash!

If you're seeking parts to freshen up your Maxim 9, this will be useful! The KRYTAC Blowback Housing for SilencerCo Maxim 9 GBB Pistol is a replacement original part designed for KRYTAC's SilencerCo Maxim 9, made from alloy.

This part houses the nozzle/blowback unit, nozzle spring and piston head, and is installed inside the slide. It also helps guide the hammer group parts and racks the hammer back as the pistol cycles. If your Maxim 9 has become a runaway gun (it only shoots full auto until the mag is empty), this may cure it!

If you're experiencing sluggish performance from your Maxim 9, this should sort it! The KRYTAC Hammer Spring for SilencerCo Maxim 9 GBB Pistol is a replacement original part, ideal for spares and repairs.

This spring is made from spring steel and is responsible for dropping the internal hammer to hit the valve knocker and release gas from the magazine. If you're experiencing "light striking" issues, this may be the key to sorting it!

If you're planning to freshen up your Maxim 9 GBB with some new parts, this should be handy! The KRYTAC Hammer Sear Spring for SilencerCo Maxim 9 GBB is an original replacement part for the Maxim 9 GBB pistol from KRYTAC. This part prevents the hammer sear from bouncing, so if you're having hammer bounce or misfiring issues, this should solve them!

If you're experiencing sluggish cycling from your Maxim 9, this may cure it! The KRYTAC Nozzle Return Spring for SilencerCo Maxim 9 GBB is an original replacement part made from spring steel. The nozzle spring is responsible for returning the nozzle to battery during the blowback cycle, and is a great spare part to have in the stash just in case.

Repairing your Maxim 9? The KRYTAC Hammer Sear for SilencerCo Maxim 9 GBB will come in handy! An original replacement part made from steel, the Hammer Sear is a high-wear component, a good one to have in the toolbox just in case!

If you're experiencing consistency issues with your Maxim 9, a fresh valve knocker may be the solution! The KRYTAC Valve Knocker for SilencerCo Maxim 9 GBB is a replacement original part made from steel. The valve knocker is the piece which hits the magazine valve to release gas, so if you're experiencing inconsistent cycling, this part may solve it.

If you're experiencing sluggish cycling or gas efficiency issues with your Maxim 9, this may cure it! The KRYTAC Piston Head for SilencerCo Maxim 9 GBB is a replacement original part, responsible for sealing the rear of the blowback unit/nozzle to cycle the slide. If your Maxim 9 has spent some time without lubrication, this part will most likely need replacing. A good spare to have in the parts bin for a worst-case scenario!

Whether you're experiencing a leak from the top of your Maxim 9 mag or you want to freshen it up to improve gas efficiency, the KRYTAC Gas Route Bucking for SilencerCo Maxim 9 GBB Magazine is a useful spare to have in the stash. Made from rubber, this original KRYTAC part seals the magazine to the blowback unit/nozzle assembly and is installed on the top of the magazine.

If you're experiencing range and accuracy issues with your KRISS Vector or Maxim 9, this replacement original part will have it shooting as good as new! The KRYTAC HOP-up Bucking for KRISS® Vector/Maxim 9 GBB is designed for the KRYTAC Maxim 9 and KRISS Vector GBBs but should also work in other VSR/GBB bucking-compatible platforms.

If you are treating yourself to the new Krytac SilencerCo Maxim 9 GBB you will need somewhere for it to live! The Krytac SilencerCo Maxim 9 GBB Pistol Holster is designed for this exact role. The holster is constructed from polymer with steel screws and nuts and has adjustable level 2 retention to allow for a fast draw without the need to press any buttons. The holster can be mounted to any belt of less than 2" in width, and comes with a belt mount included and pre-installed. For Maxim 9 users this is essential! 

If you're eyeing up the positively deadly Maxim 9, this bundle will make you grin! The Maxed-Out Maxim Bundle pairs the KRYTAC SilencerCo Maxim 9 GBB Pistol with 2 extra magazines (3 total), a 100rnd speed loader, a Maxim 9 Retention holster, a 1KG Bulk Bag of Delta Armory EAGLE BIO 0.25g BBs and a can of NUPROL 3.0 Red Gas, getting you ready to rock with this unique and realistic integrally suppressed pistol build!