Airsoft Helmets & Helmet Accessories

A set of Polymer Goggle retainers which will secure a set of goggles to your helmet, provided you have a set of FAST-style rails on your lid and your goggle strap is no wider than 36mm.

A set of Polymer Goggle retainers which will secure a set of goggles to your helmet, provided you have a set of FAST-style rails on your lid and your goggle strap is no wider than 36mm.

A lightweight Polymer mount for FAST, BUMP and MICH Airsoft helmets that have a front mount, allowing you to attach GOPRO cameras to record your gameplay. 

A lightweight Polymer mount for FAST, BUMP and MICH Airsoft helmets that have a front mount, allowing you to attach GOPRO cameras to record your gameplay. 

If you have a FAST helmet but don't run comms, we are sure you have taken a few painful shots through those massive openings around the ears. It sucks, we agree, but the solution is here! The FMA Protective Side Covers are constructed from high-density rubber and attach to the ARC rails on FAST helmets, protecting your ears whilst remaining flexible enough not to inhibit your head movement. The covers come as a set of two, just like your ears, and are the key to surviving CQB without taking painful ear shots.

These covers are sized to fit FAST helmet ARC rails and are unlikely to fit other helmets without modification.

A set of Velcro-backed, soft foam pads for placing inside helmets, to ensure that the position of your helmet is both correct and comfortable. They pads can be used in combination with an existing set of pads, or can be used to replace old and missing pads. 

A fabric helmet cover, designed to be used to cover MICH 2000 helmets and change their appearance as quickly and as easily as possible.

Is your replica FAST helmet too shiny, like a bald mans head? Don't fancy painting it? The FMA maritime helmet cover solves this issue whilst providing excellent function with its camo fabric and extra loops for foliage if you want to truly disappear in the woods. 

If you have an FMA EX Ballistic style helmet and want to change up your rails for a different colour, here is your opportunity! These Helmet Rails from FMA are designed to fit EX type ballistic helmets, and include two goggle strap hooks, two Picatinny rails, bungee retention elastics and all the bolts you need to mount this to your lid. 

If you have an FMA EX Ballistic style helmet and want to change up your rails for a different colour, here is your opportunity! These Helmet Rails from FMA are designed to fit EX type ballistic helmets, and include two goggle strap hooks, two Picatinny rails, bungee retention elastics and all the bolts you need to mount this to your lid. 

If you have an FMA EX Ballistic style helmet and want to change up your rails for a different colour, here is your opportunity! These Helmet Rails from FMA are designed to fit EX type ballistic helmets, and include two goggle strap hooks, two Picatinny rails, bungee retention elastics and all the bolts you need to mount this to your lid. 

A set of Velcro-backed, soft foam pads for placing inside helmets, to ensure that the position of your helmet is both correct and comfortable. They pads can be used in combination with an existing set of pads, or can be used to replace old and missing pads. 

A lightweight cover for FAST helmets, allowing you to quickly and easily change the camo pattern of your helmet with minimal effort.

A set of Adapters to attach your EARMOR Active Ear Protection Headsets to an M-TEK Flux Helmet Rail. If you own a pair of EARMOR Active Ear Defenders (such as the M32) and a M-TEK Flux Helmet, then this is the most efficient and comfortable way to combine the two. This method of mounting removes the needs for the large and cumbersome headband, making them far more pleasant to wear for a long skirmish.

A lightweight Airsoft replica helmet constructed from Polymer, designed to replicate the US Army's MICH 2000 helmet. 

A lightweight Airsoft replica helmet constructed from Polymer, designed to replicate the US Army's MICH 2000 helmet. 

A lightweight Airsoft replica helmet constructed from Polymer, designed to replicate the US Army's MICH 2000 helmet. 

If you are looking for some kit to style up your lid and give it more of an "operator" look, or you have a GoPro or similar camera and need somewhere to put a power bank, this helmet pouch from EmersonGear will do the job perfectly. The Accessory/Counterweight Pouch attaches to your helmet's velcro and provides a velcro strip across the top, elastic loops to add foliage or help keep your wiring neat, and a pouch at the rear with an open top and two flaps to secure, with cable router loops mounted beneath. The pouch measures approximately 12 x 3 x 8.5cm.

If you are looking for some kit to style up your lid and give it more of an "operator" look, or you have a GoPro or similar camera and need somewhere to put a power bank, this helmet pouch from EmersonGear will do the job perfectly. The Accessory/Counterweight Pouch attaches to your helmet's velcro and provides a velcro strip across the top, elastic loops to add foliage or help keep your wiring neat, and a pouch at the rear with an open top and two flaps to secure, with cable router loops mounted beneath. The pouch measures approximately 12 x 3 x 8.5cm.

If you are looking for some kit to style up your lid and give it more of an "operator" look, or you have a GoPro or similar camera and need somewhere to put a power bank, this helmet pouch from EmersonGear will do the job perfectly. The Accessory/Counterweight Pouch attaches to your helmet's velcro and provides a velcro strip across the top, elastic loops to add foliage or help keep your wiring neat, and a pouch at the rear with an open top and two flaps to secure, with cable router loops mounted beneath. The pouch measures approximately 12 x 3 x 8.5cm.

If you are looking for some kit to style up your lid and give it more of an "operator" look, or you have a GoPro or similar camera and need somewhere to put a power bank, this helmet pouch from EmersonGear will do the job perfectly. The Accessory/Counterweight Pouch attaches to your helmet's velcro and provides a velcro strip across the top, elastic loops to add foliage or help keep your wiring neat, and a pouch at the rear with an open top and two flaps to secure, with cable router loops mounted beneath. The pouch measures approximately 12 x 3 x 8.5cm.

If you are looking for some kit to style up your lid and give it more of an "operator" look, or you have a GoPro or similar camera and need somewhere to put a power bank, this helmet pouch from EmersonGear will do the job perfectly. The Accessory/Counterweight Pouch attaches to your helmet's velcro and provides a velcro strip across the top, elastic loops to add foliage or help keep your wiring neat, and a pouch at the rear with an open top and two flaps to secure, with cable router loops mounted beneath. The pouch measures approximately 12 x 3 x 8.5cm.

A compact and incredibly light lighting solution that is both helmet mountable and MOLLE. Designed to offer a low light solution for reading information and identifying others of your position. The unit has 2x brightness settings and also includes 3x batteries (one is already fitted from factory).

A Polymer constructed Helmet which is shock-resistant and durable. It has an adjustable chin strap and comes included with adhesive internal padding to make it more comfortable/fit better at your control. The front of the Helmet features a slot for NVG/Wilcox Mounts, and the side rails come included with 20mm inserts for you to install compatible accessories to the sides of the helmet.

A Polymer constructed Helmet which is shock-resistant and durable. It has an adjustable chin strap and comes included with adhesive internal padding to make it more comfortable/fit better at your control. The front of the Helmet features a slot for NVG/Wilcox Mounts, and the side rails come included with 20mm inserts for you to install compatible accessories to the sides of the helmet.

A Polymer constructed set of adaptors for railed helmets, allowing you to install 20mm accessories to your helmet setup.

This Airsoft Replica Ballistic Helmet is both lightweight and tough, offering protection from Airsoft Hits for your head, as well as allowing you to mount accessories, and just to enhance the look of your loadout. If you're looking to secure an operator loadout, then a brain bucket should be high on your list.

This Airsoft Replica Ballistic Helmet is both lightweight and tough, offering protection from Airsoft Hits for your head, as well as allowing you to mount accessories, and just to enhance the look of your loadout. If you're looking to secure an operator loadout, then a brain bucket should be high on your list.

This Airsoft Replica Ballistic Helmet is both lightweight and tough, offering protection from Airsoft Hits for your head, as well as allowing you to mount accessories, and just to enhance the look of your loadout. If you're looking to secure an operator loadout, then a brain bucket should be high on your list.

This Airsoft Replica Ballistic Helmet is both lightweight and tough, offering protection from Airsoft Hits for your head, as well as allowing you to mount accessories, and just to enhance the look of your loadout. If you're looking to secure an operator loadout, then a brain bucket should be high on your list.