Specna Arms - CORE™ Range

A delightfully consistent spring-powered bolt action M40A5 replica from Specna Arms; made to a stunning standard with everything you need you get sniping right out of the box, including 3 x magazines, a bipod and a scope.

A delightfully consistent spring-powered bolt action M40A5 replica from Specna Arms; made to a stunning standard with everything you need you get sniping right out of the box, including 3 x magazines, a bipod and a scope.

Specna Arms has its ear to the ground when it comes to providing players with the performance they need to compete on the modern Airsoft battlefield. As such, Specna have released their successful SA-S02 M40A3 sniper rifle platform in an upgraded form, with a stronger spring averaging between 460 and 480 FPS on 0.2g BBs.

This set includes the upgraded SA-S02 sniper rifle, a 3-9x40mm scope, a set of 25mm/1-inch scope rings for 20mm Picatinny rails and 3 magazines, leaving you only the ammunition to fork out for!

This MK18 is an excellent choice for skirmishers who want good and reliable performance without the usual weight or price tag of more premium platforms. This licensed and trademarked MK18 AEG adds an enhanced real steel receiver to the Milspec MK18 mix, providing an iconic design with an added sprinkling of realism from the real steel Daniel Defense® trademarks.

This SA-C19 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm.

The CORE™ Gen.2 takes entry-level AEGs to a whole new level, boasting the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit, both borrowed from the PRIME™ range. It also includes a CNC aluminium Aether™ nozzle and Helium™ HOP-up bucking, dramatically improving accuracy and range. Topping it all off is the HAL programmable ETU, offering a wide array of fire modes from 3-round burst and binary trigger to semi-auto only, and much more.

This MK18 is an excellent choice for skirmishers who want good and reliable performance without the usual weight or price tag of more premium platforms. This licensed and trademarked MK18 AEG adds an enhanced real steel receiver to the Milspec MK18 mix, providing an iconic design with an added sprinkling of realism from the real steel Daniel Defense® trademarks.

This SA-C19 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm.

The CORE™ Gen.2 takes entry-level AEGs to a whole new level, boasting the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit, both borrowed from the PRIME™ range. It also includes a CNC aluminium Aether™ nozzle and Helium™ HOP-up bucking, dramatically improving accuracy and range. Topping it all off is the HAL programmable ETU, offering a wide array of fire modes from 3-round burst and binary trigger to semi-auto only, and much more.

The Spenca CORE™ V2 Gearbox Shell provides 8mm bushings, radiused cylinder windows to help prevent cracks, and quick release spring functionality. Perfect for starting your ultimate gearbox build!

A spring-powered Airsoft bolt action Sniper Rifle which is a replica of the ever-popular M40A5, and comes with 3 x magazines and a Polymer rail system for the handguard.

A spring-powered Airsoft bolt action Sniper Rifle which is a replica of the ever-popular M40A5, and comes with 3 x magazines and a Polymer rail system for the handguard.

A spring-powered Airsoft bolt action Sniper Rifle which is a replica of the ever-popular M40A5, and comes with 3 x magazines and a Polymer rail system for the handguard.

Get the real steel style for an affordable price! This Specna Arms rifle is licensed by Daniel Defense, one of the leading American firearm manufacturers. It is sporting an Airsoft replica of the RIS III 10.5" rail, a well-loved rail by the American military.

Specna's CORE™ Gen.2 pushes the feature set of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you're looking for a beginner AEG which is a cut above the rest, the Specna Arms SA-C27 CORE™ Gen.2 M4/AR-15 AEG is one to watch!

If you're looking for slick modern styling, the Specna Arms CORE™ Blaze Red Dot Sight is an excellent and affordable option! Offering a wide range of brightness settings and two mounting options included in the box, this optic is fog and water resistant; an incredible featureset usually only found on optics twice this price!

The Blaze is designed to mount to 20mm Picatinny rails. The pre-installed mount is set at the standard AR-15 height over bore, and the included low mount is ideal for platforms like AKs and AR-36s with raised 20mm Picatinny rails. With 12 brightness settings for superb functionality in both low light and bright conditions, and the iconic T1 style without the high price, the Specna Arms CORE™ Blaze Red Dot Sight is ideal for the budget-conscious skirmisher who demands quality!

The Specna Arms SA-C22 CORE™ HAL¹ ETU™ M4/AR-15 Carbine AEG is the perfect beginner Airsoft rifle. With its preinstalled MOSFET, it is sure to outperform other platforms at a similar price point. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high-density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long.

This rifle is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm.

Specna's CORE™ Gen.2 pushes the feature set of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

The Specna Arms SA-C22 CORE™ HAL¹ ETU™ M4/AR-15 Carbine AEG is the perfect beginner Airsoft rifle. With its preinstalled MOSFET, it is sure to outperform other platforms at a similar price point. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high-density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long.

This rifle is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm.

Specna's CORE™ Gen.2 pushes the feature set of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

If you're a fan of the iconic Krinkov short-barreled AK and like to move fast, the Specna Arms SA-J81 CORE™ AKS-74U Gen. 2; HAL ETU should be your next primary! Made from a combination of strong high-density polymer with steel and alloy parts where it counts, this AKS-74U replica is a fast-mover on the outside and performs like a champ, especially when you consider the price!

Inside, the SA-J81 is equipped with Specna's CORE™ gen.2 internals, including 16:1 ratio high speed gears for a rate of fire boost, a polymer piston with a full steel tooth rack, a CNC aluminium air nozzle and the Magnus rotary TDC HOP-up unit. The Magnus, combined with the Helium flat HOP-up bucking and 6.03mm tightbore inner barrel, gives this compact beast far more potential at long range than the enemy team will expect! If you're after an "easy mode" AKS-74U replica, the Specna Arms SA-J81 CORE™ AKS-74U Gen. 2; HAL ETU has your name on it!

If you need to fix up your Specna Arms CORE™, you need this upper receiver! It is a replacement original part, and is a perfect replacement part if your old upper receiver is looking worse for wear. The upper receiver comes with a pre-installed mock forward assist and dust cover, but you will need to source a mock bolt carrier and charging handle separately.

This Airsoft red dot would look perfect on an SMG! The Specna Arms CORE™ Tundra Red Dot Sight boasts a compact, low-profile design with a lightweight and durable aluminium casing. It has an IPX67 water-resistant rating, as well as being shockproof and fogproof.

This red dot attaches to 20mm Picatinny rails using the included mount. It sits low on the rail, making it ideal for compact shooting stances and compact platforms. The elevation and windage are adjustable using the two capped turrets found on the top and right-hand side of the optic.

A unique feature of this red dot sight is its illuminated dot; you get an option of red, green or blue in three different intensities. This is ideal for ensuring that it stands out in different environments and different light conditions. It requires a CR2032 battery for operation (not included).

If a low-profile SMG red dot has been on your shopping list, the Specna Arms CORE™ Tundra Red Dot Sight is a top pick!

Are you looking for a reliable M4 to help you in your skirmishes, or maybe you're a veteran looking for an affordable AEG to pimp out with your own upgrades? If so, the Specna Arms SA-C25 CORE™ HAL¹ ETU™ M4/AR-15 AEG is exactly what you're searching for!

This SA-C23 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built in. The HAL¹ allows you to program your trigger for various fire modes. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, and active braking.

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably.

If you're looking for a compact and lightweight AR platform perfect for close-quarters engagements, the Specna Arms SA-C08 CORE™ Gen.2 M4/AR-15 AEG is a superb choice. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high-density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long. This, the latest "Gen.2" variant, has been revamped internally with premium parts, meaning more bang for your buck than ever before!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you're after a proven platform with a lightweight exterior and pre-upgraded internals, the Specna Arms SA-C08 CORE™ Gen.2 M4/AR-15 AEG fits the bill!

You don't need to worry about carrying spare batteries with this red dot optic! The Specna Arms 4×32 ACOG Fibre Optic CORE™ Red Dot Sight features a strip of red fibre optic along the top of it, meaning the red dot reticle is powered by the sun. This makes it the ideal optic for brightly lit games, such as outdoor in summer or a well-lit CQB site.

Similar to the real steel ACOG scope, this optic has a 4x zoom, so you can enjoy the attractive look and real steel functionality. It also comes with an integral 20mm Picatinny mount and fully adjustable windage and elevation. This is the perfect optic for your daytime skirmishes, even if you aren't bothered that it looks like the iconic ACOG!

A beautiful and well-constructed replica of the M40A3 platform, that is a Spring Powered Sniper Rifle which outputs 420FPS w/ 0.2g BBs and comes included with a Scope, Bipod and Three Magazines; which is more than enough to get out in the field and Sniping straight away.

A beautiful and well-constructed replica of the M40A3 platform, that is a Spring Powered Sniper Rifle which outputs 420FPS w/ 0.2g BBs and comes included with a Scope, Bipod and Three Magazines; which is more than enough to get out in the field and Sniping straight away.

If you're an AK kinda guy but want to stay light on your feet, the Specna Arms SA-J73 CORE™ HAL¹ ETU AK-105 AEG is your ideal primary! A revamped version of the original SA-J73, the HAL¹ ETU version keeps the best bits and adds some innovative new parts into the mix, with the HAL¹ programmable MOSFET taking centre stage.

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm.

Also added to the updated SA-J73 is a new rotary AK HOP-up unit design, bringing rotary performance to the table to keep pace with ARs! Like the original SA-J73, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

If you're an operator on a budget and need an agile AK with advanced internals, the SA-J73 is exactly that. Rock solid despite its polymer build and kitted out on the inside with goodies you'd never expect at this price, you're in good hands on the field with the Specna Arms SA-J73 CORE™ HAL¹ ETU AK-105 AEG at your side!

If you're a fan of modern rifle designs and need a build which leans into an agile playstyle, the Specna Arms SA-C28 CORE™ Gen.2 Daniel Defense® RIS III 12.5'' AEG is a solid choice. Made with a CNC aluminium handguard, an alloy outer barrel and a high-density polymer receiver, stock and grip, this build brings premium looks without making your arms burn, and inside, it is equally impressive!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably.

The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more! Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze.

If you love a lightweight, beginner-friendly build with pre-upgraded internals, the Specna Arms SA-C28 CORE™ Gen.2 Daniel Defense® RIS III 12.5'' AEG has your name on it!

If you need a replacement lower receiver for your M4/AR-15 AEG, this is perfect for you! This Specna Arms Lower Receiver is an original replacement part for the Specna Arms CORE™ series, but is compatible with most M4/AR-15 AEGS, thanks to its standard shape and dimensions.

It is constructed from polymer, features a preinstalled fire selector, as well as some cool-looking Specna Arms trademarks. This is a great replacement part to get your old Airsoft platforms back up and running. It's affordable and lightweight, making it a perfect part for your loaner/beginner replica!