AEG Fire Selectors

If your selector lever is looking a bit worn, or you have a fancy selector lever installed and you want to go back to the classic look, check out the M4/AR15 AEG safety selector from CYMA. A replacement original part, this fire selector should go straight onto any CYMA M4/AR15 AEG and will also fit many others! The selector set includes a fire selector blank plate for the right side of the receiver, selector cam, ball-bearing detent, and spring.

A replacement for the original selector lever on your AK AEG. Available in two types; Type A with an extension or Type B which is a standard AK selector lever. These are designed for CYMA AK rifles but should be compatible with most other AK AEGs.

A replacement for the original selector lever on your AK AEG. Available in two types; Type A with an extension or Type B which is a standard AK selector lever. These are designed for CYMA AK rifles but should be compatible with most other AK AEGs.

If you want to take your Airsoft AK AEG to the next level and give yourself some AR-style advantages, the Enhanced Safety Lever from CYMA will speed up your weapons manipulation and make up for the AK's "retro" ergonomics. This safety lever is constructed from steel and is compatible with most Airsoft AK AEG rifles on the market, and lets you switch fire modes using the trigger finger, without removing your hand from the pistol grip.

If you want to make your AK AEG easier to manipulate in game, this is the key! The CNC Aluminium Fire Selector for AK AEGs from 5KU is patterned after an enhanced selector design from the USA, boasting a unique look and extended surfaces to allow easy fire mode changes using your trigger finger. 

This means you can keep your hand on the pistol grip during mode changes, transforming the AK to be more inline with modern shooting techniques. The CNC Aluminium Fire Selector for AK AEGs should fit most AK AEGs but as always, a certain amount of expertise will be required to install it. If you want to switch modes faster while keeping your eyes on targets downrange, this enhanced fire selector will give you the edge you need!

A replacement original selector switch set for the CM.041 SMG-5 Series of AEGs. If your selector switch is a bit worn, no need to put up with it! Replace your old selectors with some fresh ones and have your SMG-5 looking great again!

A series of Selector Plates from Modify, which are available for a range of AEGs.

If your selector switch is damaged or you lost a bit during maintenance this set can be a lifesaver! The CYMA Ambidextrous Fire Selector Gears for CM.098 is a replacement original part set for the CM.098 series of SR-25 AEGs and includes the internal selector gears and axis for the CM.098 ambidextrous selector switches.

If you've lost an SR25 selector switch, this should be helpful! The CYMA Selector Switch Set for CM.098 SR25 AEGs is a replacement original parts set for the CM.098 SR25 series and includes the left and right side selector switches, mounting screws, springs and ball bearings for that lovely "click" between modes.

The switches themselves are constructed from alloy and match the KAC-style selectors found on the CM.098 series, including the scallop on the right side selector and the undercut on the left side selector to allow for full auto fire. Selector switches are always going missing, but with this set handy, your CM.098 won't miss a beat even if the worst happens!

If you've had a mid-skirmish mishap and lost a fire selector, this set should sort you out! The Double Bell Selector Lever Set for SCAR-H is a replacement original parts set for the BY-804 and BY-805 SCAR-H AEG, including a pair of selector levers, two mounting screws and a pair of springs. 

Compatibility-wise, this will likely only fit the Double Bell SCAR-H AEG and won't work with the Double Bell SCAR-L or other brands of SCAR AEG. Anyone who has taken a SCAR apart before knows how easy it is to lose selector parts to the carpet monster; with this set handy, you have no need to worry!

If you want to add some tactical trimmings to your AK an extended fire selector would be a good call. The LCT AK Fire Selector is constructed from stamped steel and is a modernised design with a ledge that can be used to select fire modes from a firing grip. With this selector installed you no longer need to take your hand off the pistol grip to select your fire mode; simply move the new selector using the ledge and your trigger finger.

This makes a massive difference when it comes to handling an AK and allows it to go toe to toe with the AR platform in ergonomics and efficiency. It doesn't come with any fittings and is only the fire selector. A perfect item for any Tactical AK or custom AK build, this selector lever not only looks super slick but also makes your AK super slick to use. Not to mention, it will give the iconic fire selector scratch mark on your receiver!

Please note this is only the selector and does not include the necessary fittings for installation.

Fed up with fiddling when you want to switch to fun mode? TTi have you covered with the Extended Charging Handle w/Selector Switch. This set includes an extended charging handle which mounts over the top of the AAP-01 bolt and can be installed on either side, providing a protruding trigger style handle which can be racked with a single hand. Built into the rear of the charging handle we also have a low profile rotary selector lever, which means when you want to switch fire modes its no longer necessary to lock the bolt back and waste precious seconds routing around for the switch! This would be the perfect pairing for an AAP-01 in a carbine kit!

Fed up with fiddling when you want to switch to fun mode? TTi have you covered with the Extended Charging Handle w/Selector Switch. This set includes an extended charging handle which mounts over the top of the AAP-01 bolt and can be installed on either side, providing a protruding trigger style handle which can be racked with a single hand. Built into the rear of the charging handle we also have a low profile rotary selector lever, which means when you want to switch fire modes its no longer necessary to lock the bolt back and waste precious seconds routing around for the switch! This would be the perfect pairing for an AAP-01 in a carbine kit!

If you like to keep spares around just in case or you've had a selector plate failure in your Thompson or Pulse Rifle AEG, this is what you need! The CYMA Selector Plate for CM.033/051 Thompson AEG is an replacement original part from the CYMA CM.033/051 Thompson AEG series, constructed from polymer. Compatibility-wise, this should fit all Tokyo Marui spec Thompson and M41A Aliens Pulse Rifle AEGs, including those made by CYMA, Snow Wolf and Tokyo Marui.

If you want to add some tactical trimmings to your AK an extended fire selector would be a good call. The CYMA Tactical Extended Fire Selector Lever for AK47/74 AEG is constructed from stamped steel and is a modernised design with a cutout for the AK bolt handle and a ledge that can be used to select fire modes from a firing grip.

With this selector installed you no longer need to take your hand off the pistol grip to select your fire mode; simply move the new selector using the ledge and your trigger finger. This makes a massive difference when it comes to handling an AK and allows it to go toe to toe with the AR platform in ergonomics and efficiency. A perfect item for any Tactical AK or PMC style custom AK build, this selector lever not only looks super slick but also makes your AK super slick to use!

If you've lost a selector switch from your ARCTURUS AR15 Lite AEG, this set will sort you out! The Ambidextrous Selector Switch Set for AR15 Lite Series from ARCTURUS is an original replacement parts set specifically for the ARCTURUS AR15 Lite AEG series and is unlikely to fit other brands and models of M4 AEG. 

The set includes both selector switches, the mounting bolts, the detent and detent spring, replacing the entire external selector mech of the AR15 Lite. If you had a mid-game mishap and lost a selector switch, this set will get you up and running again!

Looking for fast access to the selector switch on your AAP-01? So are we! Thankfully, TTi, being the innovators they are have invented the perfect solution! The Competition Charging Handle with selector switch combines an extended charging handle with an extended rotary selector switch which allows you to change fire modes in a flash without needing to lock the bolt open and break fingernails. This is the aftermarket part the AAP always needed!

If your selector switch is damaged or you lost a bit during maintenance this set can be a lifesaver! The ARCTURUS Ambi Fire Selector Gear Set for M4/M16 Replicas is a replacement original part set for ARCTURUS AEGs that feature a double sided, ambidextrous fire selector. This set includes the internal selector gears and axis for your AEGs ambidextrous selector switches.

If you want to style up your M4/AR15 with some interesting small parts, starting with the fire selector isn't a bad shout! Introducing the Custom Safety Selector from Big Dragon, a stylish modern selector moulded from polymer, with an enlarged design and grooves for additional grip which guarantees you won't slip off the selector at a critical moment! This selector could be the icing on the cake that is your latest high-speed M4 build, and provides a vast improvement over standard M4/AR15 selector levers. 

If you have had a mishap and broken your selector plate, or you want something a bit stronger to reduce the likelihood of failure and reduce resistance at the same time the Laylax Hard Selector Plate is what you need. This selector plate is compatible with M4/AR15 AEGs and is constructed from hardened polymer to reduce flex and improve strength. This is a conventional selector plate designed for standard trigger contacts and will not work with optical MOSFETs without modification.