All External Airsoft Parts & Attachments

If the charging handle of your APS ASR M4 is looking a bit worn, why not swap it out for a fresh one? The APS M4/AR-15 Charging Handle for APS ASR Series is a replacement original part for the APS ASR series and is configured as a standard M4 charging handle with a low profile latch on the left side. The handle is constructed from alloy and finished in matt black. A good opportunity to make your old M4 look new again!

If you want your SSG24 to be more sneaky or you want to light the enemy up with a tracer unit, this thread adapter will do the trick! The 14mm CCW Suppressor Thread Adapter for SSG24 is constructed from CNC machined aluminium and replaces the front barrel cap on the Novritsch SSG24, providing 14mm CCW male barrel threads. These are the most common barrel threads used on Airsoft rifles, so with this adapter installed you have all the options in the world when it comes to customising your SSG24 and making it truly yours. 

If you want to set your SSP5 up for competition shooting or speed up its handling in general, the Novritsch SSP5 Charging Handle would be a great upgrade. This charging handle mounts in place of the rear sight, making it ideal for red dot equipped setups, allowing you to manipulate the slide far quicker and easier than before. This is the Left Side charging handle variant, meaning it protrudes to the left side of the pistol, perfect for right-handed shooters. 

Whether you use your SSP5 as a primary weapon or as a steel shooting beast in AIPSC, this charging handle will change the way you use the platform and make racking the slide after a reload far easier and more intuitive than ever before. Weighing in a minuscule 5g, this won't slow your SSP5 down one bit!

If you want to save some weight on your AR36 or Novrtisch SSR63 and give it a whole new look, you have found what you need! The Novritsch Minimal 20mm Picatinny Rail Kit for SSR63/AR36 AEG is constructed from alloy with steel mounting bolts and is compatible with the full range of Novritsch SSR63 AEGs as well as most AR36 AEG and GBBR platforms. The part is manufactured by Double Bell, includes built-in flip-up iron sights and is based on the real steel KAC design. 

The set provides a 20mm Picatinny top rail measuring approximately 10cm in length, enough for most red dot sights and smaller magnified scopes while minimising excess material to keep the weight low. The built-in flip-up iron sights are fully adjustable, with a single rear aperture which can be raised and lowered by turning the drum just below the aperture and adjusted left and right via the drum on the right side. If your AR36 needs a style up or you want to lean in to the light and tight design philosophy of the Novritsch SSR63, this kit is the perfect upgrade!

If you have an M4/AR-15 build planned or you want to style up your old M4, a free float rail is a great way to give your primary a cutting-edge new look. The HASTA Middy Free Float M-LOK handguard is constructed from CNC machined aluminium and is designed for M4/AR-15 platforms, both AEG and GBB.

The handguard comes complete with an aluminium barrel nut and steel mounting bolts and boasts M-LOK attachment slots at the, 6, and 9 o'clock positions, with a full-length 20mm Picatinny rail up top. You will never be short of sling mounting options with this handguard on your gat; the Middy boasts a total of 5, count'em, 5 QD sling sockets, giving you all the options under the sun on how you set up your sling.

If your AR is due for an update and you want to be at the head of the pack when it comes to weight savings, accessory options and super slick, modern looks, the HASTA Middy handguard is the one to go for!

If your M4/AR-15 needs freshening up with a new look, the HASTA Blade Free Float M-LOK Handguard is a great way to do it. This handguard is constructed from CNC machined aluminium and boasts M-LOK slots at the 3, 6, and 9 o'clock positions with a full-length 20mm Picatinny rail up top.

The Blade handguard is available in 4 different lengths to suit any build style, with 7", 9", 10" and 12" to choose from. The M-LOK and Picatinny attachment interfaces are punctuated with angled and triangular vent ports, reducing weight and providing a cutting-edge look. The included aluminium barrel nut is pre-installed inside the handguard itself and its aluminium construction helps save weight for a more pointable and agile front end.

If you want to take advantage of the M4/AR-15's "Barbie for men" modularity, the Blade handguard is perfect for the job!

If you're working on your SBR build, this handguard will be an asset! The HASTA Storm Free Float M-LOK Handguard is designed for any M4/AR-15 AEG or GBBR and requires an M4/AR-15 armourers' wench or a barrel nut tool to install. The Storm is constructed from CNC machined aluminium and finished in matt black anodisation, providing plenty of strength and flawlessly in-spec attachment interfaces. 

The Storm handguard replaces your existing handguard and barrel nut, offering M-LOK slots at 3, 6 and 9 o'clock with additional M-LOK slots at the offset angles, and a 20mm Picatinny rail up top which should mate with your receiver rail seamlessly. The offset M-LOK slots make the perfect spot to mount a tactical flashlight, keeping it tucked into the handguard for a slim, snag-free setup, ideally suited to short-barreled setups with limited accessory space. 

For a short-barrelled build, the Storm is the perfect handguard, marrying low weight, more M-LOK slots than its rivals and a menacing, angular profile which suits any modern platform!

If you have plans to style up your M4 or there is a custom build in the works, the HASTA Headway Free Float M-LOK handguard should fit the bill. This CNC aluminium free float handguard adds M-LOK on the sides and bottom with 20mm Picatinny up top in a remarkably slim design well suited to those who prefer the slimmest handguard possible. The Headway is designed for M4/AR-15 Airsoft guns, both AEGs and GBBRs.

Included with the handguard is an aluminium barrel nut which is pre-installed inside the handguard, requiring an M4/AR-15 armourers' wrench or barrel nut tool to install. The upper rail slots are numerically marked so you can keep track of where you prefer your accessories, and between the M-LOK slots, we have attractive angled vent ports which help reduce weight and provide a modern aesthetic. 

If your objective is to save weight on your AR or you want to give it an ergonomic upgrade with ample accessory options, the HASTA Headway Free Float is the handguard you want!

If you have an M4/AR-15 build planned or you want to style up your old M4, a free float rail is a great way to give your primary a cutting-edge new look. The HASTA Middy Free Float M-LOK handguard is constructed from CNC machined aluminium and is designed for M4/AR-15 platforms, both AEG and GBB.

The handguard comes complete with an aluminium barrel nut and steel mounting bolts and boasts M-LOK attachment slots at the, 6, and 9 o'clock positions, with a full-length 20mm Picatinny rail up top. You will never be short of sling mounting options with this handguard on your gat; the Middy boasts a total of 5, count'em, 5 QD sling sockets, giving you all the options under the sun on how you set up your sling.

If your AR is due for an update and you want to be at the head of the pack when it comes to weight savings, accessory options and super slick, modern looks, the HASTA Middy handguard is the one to go for!

If your M4/AR-15 needs freshening up with a new look, the HASTA Blade Free Float M-LOK Handguard is a great way to do it. This handguard is constructed from CNC machined aluminium and boasts M-LOK slots at the 3, 6, and 9 o'clock positions with a full-length 20mm Picatinny rail up top.

The Blade handguard is available in 4 different lengths to suit any build style, with 7", 9", 10" and 12" to choose from. The M-LOK and Picatinny attachment interfaces are punctuated with angled and triangular vent ports, reducing weight and providing a cutting-edge look. The included aluminium barrel nut is pre-installed inside the handguard itself and its aluminium construction helps save weight for a more pointable and agile front end.

If you want to take advantage of the M4/AR-15's "Barbie for men" modularity, the Blade handguard is perfect for the job!

If you have an M4/AR-15 build planned or you want to style up your old M4, a free float rail is a great way to give your primary a cutting-edge new look. The HASTA Middy Free Float M-LOK handguard is constructed from CNC machined aluminium and is designed for M4/AR-15 platforms, both AEG and GBB.

The handguard comes complete with an aluminium barrel nut and steel mounting bolts and boasts M-LOK attachment slots at the, 6, and 9 o'clock positions, with a full-length 20mm Picatinny rail up top. You will never be short of sling mounting options with this handguard on your gat; the Middy boasts a total of 5, count'em, 5 QD sling sockets, giving you all the options under the sun on how you set up your sling.

If your AR is due for an update and you want to be at the head of the pack when it comes to weight savings, accessory options and super slick, modern looks, the HASTA Middy handguard is the one to go for!

If you have the Novritsch SSR63 A2 or A3 and it is a bit long for your playstyle, this is what you need to shorten her up a bit! The Novritsch Short Conversion Kit for SSR63 A2/A3 AEG includes a "C" length outer barrel with 14mm CCW male threads at the tip, a 6.03mm tightbore inner barrel and a CNC aluminium M-LOK handguard with 20mm Picatinny rail sections in key locations. 

This set includes everything you need to transform your SSR63 A2 or A3 into the short configuration, shaving a few precious inches off the barrel so you can clear corners more effectively and have better mobility in CQB scenarios. Whether you want to hot-swap your SSR63 A2/A3 for the odd CQB game or you prefer a shorter primary to maximise aggression, this kit should suit you perfectly!

The HASTA Hammer Hybrid Free Float is the perfect handguard for those who want to make use of M-LOK grips and rail covers but still like their flashlights and other kit fitted to the good old 20mm Picatinny rail. As a hybrid rail system, the Hammer gives you the best of both worlds; with an ultra-slim central profile equipped with M-LOK slots and short 20mm Picatinny sections built-in at the front and rear, ideal for sling points, bipods, tactical flashlights and laser aiming modules.

The slimmed-down central section also makes the perfect place to grip the handguard if you prefer the modern C-clamp grip style, matching rival rail systems with their ergonomic, ultra-slim profile. To compensate for the presence of 20mm Picatinny rails, the Hammer is adorned with oblong weight-reducing vent ports, keeping the weight low for an agile and pointable front end. 

To install the Hammer Hybrid Free Float, you will need an M4/AR-15 Armourers' wrench or barrel nut tool. The handguard is supplied with an aluminium barrel nut pre-installed, keeping with the theme of saving weight while providing ample strength for Airsoft purposes. If your AR could use a style-up and you like to mix M-LOK and 20mm accessories, the Hammer Hybrid is the handguard you need!

If you have plans to style up your M4 or there is a custom build in the works, the HASTA Headway Free Float M-LOK handguard should fit the bill. This CNC aluminium free float handguard adds M-LOK on the sides and bottom with 20mm Picatinny up top in a remarkably slim design well suited to those who prefer the slimmest handguard possible. The Headway is designed for M4/AR-15 Airsoft guns, both AEGs and GBBRs.

Included with the handguard is an aluminium barrel nut which is pre-installed inside the handguard, requiring an M4/AR-15 armourers' wrench or barrel nut tool to install. The upper rail slots are numerically marked so you can keep track of where you prefer your accessories, and between the M-LOK slots, we have attractive angled vent ports which help reduce weight and provide a modern aesthetic. 

If your objective is to save weight on your AR or you want to give it an ergonomic upgrade with ample accessory options, the HASTA Headway Free Float is the handguard you want!

If you aren't convinced by these new-fangled M-LOK and KeyMod handguards and you prefer good old Picatinny, the HASTA SWS Free Float 20mm RIS/RAS Handguard for M4/AR-15 is perfect for your next build. This handguard is constructed from CNC machined aluminium and is a quad rail handguard, meaning it is rocking 20mm Picatinny rails at the 3, 6, 9 and 12 o'clock positions, ready for any 20mm Picatinny accessories you choose to mount.

Also featured on the SWS rail are a pair of QD sling sockets, right at the front, ready for QD sling swivels to be added for a slick quick detachable sling setup to save you time when swapping primaries mid-game. The SWS handguard is supplied with an aluminium barrel nut and steel mounting bolts, minimising unnecessary weight to keep you agile and able to compete with the M-LOK users. If you reject modernity and embrace tradition, the SWS should suit your needs!

If you have plans to style up your M4/AR-15, a new handguard can change its looks entirely while adding a lot of extra functionality. The HASTA SLP Free Float M-LOK handguard is constructed from CNC machined aluminium, boasting ultra-low weight, QD sling sockets and plenty of M-LOK slots with integrated 20mm rail sections just where you need them.

Available in 4 different lengths to suit any build objective, the HASTA SLP handguard has the sporty modern looks to keep your AR at the cutting edge. Angled swept-back ports punctuate the M-LOK slots, serving both as weight reduction and to provide a dynamic look, and at the base of the handguard, we are treated to realistic markings.

If you need your AR to be the slickest and quickest, the HASTA SLP Free Float M-LOK Handguard for M4/AR-15 will be an asset to your build!

If you have an M4/AR-15 build planned or you want to style up your old M4, a free float rail is a great way to give your primary a cutting-edge new look. The HASTA Middy Free Float M-LOK handguard is constructed from CNC machined aluminium and is designed for M4/AR-15 platforms, both AEG and GBB.

The handguard comes complete with an aluminium barrel nut and steel mounting bolts and boasts M-LOK attachment slots at the, 6, and 9 o'clock positions, with a full-length 20mm Picatinny rail up top. You will never be short of sling mounting options with this handguard on your gat; the Middy boasts a total of 5, count'em, 5 QD sling sockets, giving you all the options under the sun on how you set up your sling.

If your AR is due for an update and you want to be at the head of the pack when it comes to weight savings, accessory options and super slick, modern looks, the HASTA Middy handguard is the one to go for!

If your M4/AR-15 needs freshening up with a new look, the HASTA Blade Free Float M-LOK Handguard is a great way to do it. This handguard is constructed from CNC machined aluminium and boasts M-LOK slots at the 3, 6, and 9 o'clock positions with a full-length 20mm Picatinny rail up top.

The Blade handguard is available in 4 different lengths to suit any build style, with 7", 9", 10" and 12" to choose from. The M-LOK and Picatinny attachment interfaces are punctuated with angled and triangular vent ports, reducing weight and providing a cutting-edge look. The included aluminium barrel nut is pre-installed inside the handguard itself and its aluminium construction helps save weight for a more pointable and agile front end.

If you want to take advantage of the M4/AR-15's "Barbie for men" modularity, the Blade handguard is perfect for the job!

If your M4 has become boring and you want to spice it up with a new look, the HASTA Pointman Free Float M-LOK handguard would be a great upgrade. This handguard is constructed from CNC machined aluminium and boasts a combination of M-LOK slots and 20mm Picatinny rails at the 3, 6 and 9 o'clock positions with a full-length Picatinny rail on top. The 20mm side and bottom rails are machined into the handguard itself, meaning if you want to mount a flashlight or laser to the side you don't have to buy extra rail adapters!

The handguard comes with an aluminium barrel nut which is pre-installed and makes use of steel mounting bolts to provide extra strength exactly where it's needed. The 20mm rail slots are all numerically marked so you can keep track of your favourite place to mount your mission essential doo-dads, and at the base of the handguard, we are treated to a pair of QD sling sockets, one on each side.

If you're looking for a new handguard to set your AR apart from the rest, the HASTA Pointman will do just that. Its combination of a dynamic swept-back front end with oblong weight-reducing ports punctuated by accessory mounting interfaces gives it the cutting-edge looks everyone expects in a modern-day M4/AR-15 platform!

If you aren't convinced by these new-fangled M-LOK and KeyMod handguards and you prefer good old Picatinny, the HASTA SWS Free Float 20mm RIS/RAS Handguard for M4/AR-15 is perfect for your next build. This handguard is constructed from CNC machined aluminium and is a quad rail handguard, meaning it is rocking 20mm Picatinny rails at the 3, 6, 9 and 12 o'clock positions, ready for any 20mm Picatinny accessories you choose to mount.

Also featured on the SWS rail are a pair of QD sling sockets, right at the front, ready for QD sling swivels to be added for a slick quick detachable sling setup to save you time when swapping primaries mid-game. The SWS handguard is supplied with an aluminium barrel nut and steel mounting bolts, minimising unnecessary weight to keep you agile and able to compete with the M-LOK users. If you reject modernity and embrace tradition, the SWS should suit your needs!

If you have plans to give your M4/AR-15 an external overhaul, a new handguard is a great place to start. The HASTA NSR Free Float KeyMod Handguard for M4/AR-15 fits most M4/AR-15 AEG and GBBR platforms and is equipped with KeyMod negative space attachment slots at the 3, 6, and 9 o'clock positions with 20mm Picatinny up top, ready to be decked out!

The NSR Free Float is constructed from CNC machined aluminium with an aluminium barrel nut and steel attachment bolts and will require an M4/AR-15 armourers wrench or barrel nut tool to install. The included aluminium barrel nut is pre-installed inside the handguard itself and its aluminium construction helps save weight for improved handling and reduced in-game fatigue. 

Whether you are addicted to chopping and changing your AR or you have an old one that could do with modernisation, the HASTA NSR Free Float is a fantastic choice with a slick modern aesthetic!

If you have plans to style up your M4/AR-15, a new handguard can change its looks entirely while adding a lot of extra functionality. The HASTA SLP Free Float M-LOK handguard is constructed from CNC machined aluminium, boasting ultra-low weight, QD sling sockets and plenty of M-LOK slots with integrated 20mm rail sections just where you need them.

Available in 4 different lengths to suit any build objective, the HASTA SLP handguard has the sporty modern looks to keep your AR at the cutting edge. Angled swept-back ports punctuate the M-LOK slots, serving both as weight reduction and to provide a dynamic look, and at the base of the handguard, we are treated to realistic markings.

If you need your AR to be the slickest and quickest, the HASTA SLP Free Float M-LOK Handguard for M4/AR-15 will be an asset to your build!

If you have plans to style up your M4/AR-15, a new handguard can change its looks entirely while adding a lot of extra functionality. The HASTA SLP Free Float M-LOK handguard is constructed from CNC machined aluminium, boasting ultra-low weight, QD sling sockets and plenty of M-LOK slots with integrated 20mm rail sections just where you need them.

Available in 4 different lengths to suit any build objective, the HASTA SLP handguard has the sporty modern looks to keep your AR at the cutting edge. Angled swept-back ports punctuate the M-LOK slots, serving both as weight reduction and to provide a dynamic look, and at the base of the handguard, we are treated to realistic markings.

If you need your AR to be the slickest and quickest, the HASTA SLP Free Float M-LOK Handguard for M4/AR-15 will be an asset to your build!

If you have plans to style up your M4/AR-15, a new handguard can change its looks entirely while adding a lot of extra functionality. The HASTA SLP Free Float M-LOK handguard is constructed from CNC machined aluminium, boasting ultra-low weight, QD sling sockets and plenty of M-LOK slots with integrated 20mm rail sections just where you need them.

Available in 4 different lengths to suit any build objective, the HASTA SLP handguard has the sporty modern looks to keep your AR at the cutting edge. Angled swept-back ports punctuate the M-LOK slots, serving both as weight reduction and to provide a dynamic look, and at the base of the handguard, we are treated to realistic markings.

If you need your AR to be the slickest and quickest, the HASTA SLP Free Float M-LOK Handguard for M4/AR-15 will be an asset to your build!

Lost a handguard pin from your sneaky SMG-5? That's a shame, but fortunately, we have the solution! The CYMA Handguard locking pin is designed for the CM.041 SD6 AEG series, but may also fit other SMG-5 SD6 AEGs, though we are unable to confirm which ones. The pin is constructed from alloy and is packaged as a single pin, so if you have lost both pins make sure you order two!

If you own a CM.127, CM.127S or ASG XP17 Challenger and your mag release has gone missing or broken it's your lucky day! The CYMA Magazine Catch & Spring for CM.127 AEP is a replacement original parts set for the CM.127 and CM.127S AEPs but should also fit the ASG XP17 Challenger AEP. The set includes the mag catch itself and the spring.

The CYMA Front Sling Mount Pin for SMG-5 AEG is a replacement original part for the CM.041 SMG-5 AEG series and mounts to the front sight block to provide a sling loop on the left side. If your original sling loop is damaged or has gone missing, here is your replacement!

If you are gearing up to spruce up your old AK AEG this might be handy! The Front Handguard Cap with Sling Point from CYMA is an original replacement part for the CM.04x series AKM/AK74 AEG. The part is constructed from alloy and includes the rotary locking lever for the LCT/VFC/real steel style of AK handguard attachment. This part is intended for the CM.04x series but should also work with VFC and LCT AKs, though the part may need modification. This part will not fit an AKS-74U rifle, it is designed for full size AK handguards only.

MGP brings us a high quality Quick Detach (QD) sling adaptor, allowing you to connect your weapon of choice to a sling. The QD system is locked in place by 4 steel ball bearings which are lowered with a push of the centre button to lock in place and release, again by pressing down the same button.

This version supports 20mm RIS / RAS rail system. Simply loosely screw the fixtures together using the Allen key included, then slide them onto your RIS rail, then tighten to lock the fixture in place and voila! Now you can attach and detach your sling swivel with ease, allowing for a dynamic and efficient playstyle on the battlefield.

No more unslinging your rifle from your back or shoulders!

If you have misplaced your SMG-5's rear body/stock pin you are in luck! This CYMA original replacement part is designed for CYMA SMG-5 AEGs but may also fit others. This pin is the rear body pin which holds the stock to the receiver and is constructed from alloy.