Airtech Studios

If you're running one of the newer G&G platforms with the G&G rotary HOP-up, check this out! The Airtech Studios TDC Conversion Set for G&G Rotary HOP-up Unit is intended to provide maximum performance from your original G&G rotary HOP-up unit. Designed specifically for the latest G&G rotary HOP-up design, this kit includes an enhanced HOP-up arm, TDC trolley, 2 x M-nubs and a centring unit.

The benefits of a TDC HOP-up unit include a stronger HOP-up effect and less chance of side-to-side shot deviation when using heavy BBs at high FPS. This part will require modification to your original outer barrel to fit, but thankfully these mods are quite easy and thoroughly explained on the Airtech Studios website. If you want your G&G Rotary-equipped AEG to reach out and touch the enemy at crazy ranges, this TDC Conversion Set is what you need!

This polymer constructed piece is designed to screw into your outer barrel assembly, to lock your Inner Barrel in place and removing any motion that is is able to have. This will help improve accuracy and consistency by stopping the inner barrel from wobbling as the BB travels through it. There is an option available for most major platforms, and is an absolute must-have piece for those seeking perfection in their rifles.

This polymer constructed piece is designed to screw into your outer barrel assembly, to lock your Inner Barrel in place and removing any motion that is is able to have. This will help improve accuracy and consistency by stopping the inner barrel from wobbling as the BB travels through it. There is an option available for most major platforms, and is an absolute must-have piece for those seeking perfection in their rifles.

This polymer constructed piece is designed to screw into your outer barrel assembly, to lock your Inner Barrel in place and removing any motion that is is able to have. This will help improve accuracy and consistency by stopping the inner barrel from wobbling as the BB travels through it. There is an option available for most major platforms, and is an absolute must-have piece for those seeking perfection in their rifles.

If you want to ramp up your semi-auto speed and you run a G&G, you need this! The Airtech Studios STC™ Speed Trigger Converter for G&G AEGs is designed to reduce trigger travel to a hair, allowing you to seriously spam semi in the most efficient way possible.

The STC is designed to fit a wide range of G&G AEGs (full compatibility list on Airtech Studios Website) and makes use of your original trigger, reducing trigger travel by 80%! This set will require opening the gearbox to install so we don't recommend it for newcomers. If you're a CQB player needing an edge, this will do it!

The Airtech Studios RetroArms Rotary Centring Unit is an easy upgrade to improve your AEG's accuracy. It is constructed from high-density polymer and fits a RetroArms CNC Rotary HOP-Up Chamber Gen.2 ONLY. It prevents the hop-up unit from wobbling side to side. Once fitted, the RetroArms Rotary HOP-Up Chamber will be securely fitted in place and sit in its true centre position, which prevents BBs from swerving at a tangent when shot.

As well as removing the wobbling from your HOP-up chamber, it also provides a better air seal due to the improved tightness of the system, resulting in a more stable FPS output from your AEG. While the power upgrades for shooting BBs further are significant, they wouldn't be effective without accuracy. It's often that small parts like this are overlooked in Airsoft upgrades but they have a major impact and the Airtech Studios RetroArms Rotary Centring Unit is exactly that.

Improve the consistency and accuracy of your RetroArms CNC Rotary HOP-Up Chamber Gen.2 with a simple polymer part, the improvement will be instantly noticeable!

If you're running an MTW platform and want maximum performance from your HOP-up, the Airtech Studios TDC Conversion Set for MTW Phoenix HOP-up is what you need. Designed for both the original MTW polymer HOP-up unit and the Phoenix CNC aluminium unit, this kit includes an enhanced HOP-up arm, TDC trolley, 2 x M-nubs and a centring unit.

The benefits of a TDC HOP-up unit include a stronger HOP-up effect and less chance of side-to-side shot deviation when using heavy BBs at high FPS. This part will require modification to your original HOP-up unit to fit, but thankfully these mods are quite easy and thoroughly explained on the Airtech Studios website. If you want your MTW to really send 'em, this superb HOP-up enhancement kit will do the trick!

If you're loving your PTS ODIN M12 Sidewinder and want to load other magazines, this is the adapter you'll need! The Airtech Studios Universal Adapter for PTS ODIN M12 Sidewinder Speed Loader is constructed from high density polymer, designed to insert into a PTS ODIN Sidewinder speed loader and allow you to load practically any magazine in a flash. The set also includes a strap to hold your magazine to your loader, making this a huge improvement over 3D-printed alternatives.

The Airtech Studios Set of 4 Spring Shims;11mm Inner Diameter are designed for most VFC, Krytac & ASG spec spring guides. These reinforced polymer shims slide onto the spring guide and add additional tension to the existing spring within the gearbox. The different sizes of shim add different amounts of FPS to your replica. The smallest shim adds roughly 5 FPS to your replica and the largest adds roughly 20 FPS. The shims are designed to be of various sizes so that you can combine them and find the optimal FPS increase to keep your replica within site limits.

These shims give you an easy way to increase your platform's FPS without having to have multiple springs. Simply add or remove the shims as and when you need to adjust your AEGs FPS, with minimal hassle!

Take your AEG to the next level with a revolutionary Piston. It has been redesigned to ensure a premium performance. The Nightstalker piston has eradicated all the common weaknesses of an AEG piston to create an almost flawless design. Firstly, it has been constructed from a reinforced polymer, one that can pull stronger springs without causing damage to itself. It also has a drop-in angle of engagement (AOE) which helps distribute the force evenly on the teeth of the piston rack, reducing the risk of premature wear or breakage.

The stress points of the piston have been revised to spread the wear between 3 contact points and drastically reduce the load on each tooth. Another upgrade is that the piston rails have been revised to reduce friction, this removes the wobbling of the piston against the gearbox and keeps it completely straight. All these revisions and enhancements make for a consistent improvement in FPS and performance. Make your AEG premium, for real.

A battery compartment extender designed to fit the G&G ARP9 which allows the use of a wider range of larger batteries.

Designed specifically for the Gate EON CNC Rotary HOP-up chamber, the Airtech Studios Full Upgrade Set for Gate EON HOP-up Chamber includes a TDC trolley, 2 x M-nubs and an inner barrel centring unit. This set is designed to convert the Gate EON into a true TDC unit, giving you more range and accuracy than ever before!

The benefits of a TDC HOP-up unit include a stronger HOP-up effect and less chance of side-to-side shot deviation when using heavy BBs at high FPS. This part will require a certain amount of expertise to install but thankfully, the process is fully explained on the Airtech Studios website. If you want to get the most out of your Gate EON HOP-up chamber, this kit will do the trick!

The Airtech Studios Set of 4 Spring Shims;10mm Inner Diameter are designed for most Tokyo Marui spec spring guides. These reinforced polymer shims slide onto the spring guide and add additional tension to the existing spring within the gearbox. The different sizes of shim add different amounts of FPS to your replica. The smallest shim adds roughly 5 FPS to your replica and the largest adds roughly 20 FPS. The shims are designed to be of various sizes so that you can combine them and find the optimal FPS increase to keep your replica within site limits.

These shims give you an easy way to increase your platform's FPS without having to have multiple springs. Simply add or remove the shims as and when you need to adjust your AEGs FPS, with minimal hassle!

The Airtech Studios Stock-Butt Stabilizer Unit for ASG Scorpion Evo 3 A1 removes the battle rattle from your ASG Scorpion AEG. Simply remove the pin on the stock and clip the steel stock stabiliser on instead, no more wobbly stock just like that. Its steel construction is sure to survive the rough conditions of any skirmish, and being hidden away in the stock it is unlikely to be affected by the weather as well.

If you are sick of listening to your ASG CZ Scorpion EVO 3 A1 stock rattle all skirmish long and find that it's giving your position away, the Airtech Studios Stock-Butt Stabilizer Unit for ASG Scorpion Evo 3 A1 is exactly what you need to remove this issue completely!

Turn your stock ASG Scorpion EVO's HOP-up chamber to a TDC design without having to replace the whole unit. This kit includes everything you need to install the system into your current HOP-up chamber. It is compatible ONLY with ASG Scorpion EVOs and will not fit in any other HOP-up systems.

TDC (Top-Down-Centre) HOP units are incredibly sought after due to the increased friction they add to BBs, which increases the effectiveness of the HOP applied to your BBs. By installing TDC to the stock HOP-up you are guaranteed compatibility with the platform.

The set also includes rubber nubs, these ensure the HOP is stable while BBs accelerate through the unit, further improving the performance and consistency of your ASG Scorpion EVO. This is a very complex installation process and we only recommend it if you are confident in your understanding and ability to fit it to your HOP-up chamber.