Airsoft Rails

Not a fan of SMG-5 dioptre sights? I'm not sure how, but if they don't suit you then here's a way you can still shoot sharp with your SMG-5/MP5 AEG. Allows mounting of red dot sights and shorter length magnified optics. Looks extra cool with an MRDS on!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

An Airsoft modular rail panel designed to be fit onto MLOK hand guards, providing a 5'' 20mm RIS / RAS rail. The kit comes as a kit and is easily built and can quickly be installed to MLOK hand guard to allow the attachment of aftermarket Torches, Lasers, Grips and many other aftermarket attachments.

This rail is perfect purchase for any Airsoft player who has got their hands on a new rifle and are looking to take their gun to the next level by attaching parts and accessories.

If you want a red dot sight on your AKS-74U but aren't a fan of the Russian side rail, 5KU has what you need! The 20mm Rear Sight Rail for AKS-74U AEG/GBBR is designed to mount over the rear iron sight of AKS-74U rifles, both the AEG and GBBR variety, providing a length of 20mm Picatinny rail measuring 8cm approximately. 

The part is constructed from aluminium to provide a great balance of strength and low weight and should fit most AKS-74U Airsoft guns on the market, though some may require slight modification. If you want to mount a red dot sight for faster target acquisition but still want to be able to fold your stock for tight quarters, the 5KU 20mm Rear Sight Rail for AKS-74U AEG/GBBR is the key!

A Pair of Modular 20mm RIS accessory rails designed to be fitted on to AR36 Style Handguards allowing the attachment of aftermarket parts and accessories. 

An Airsoft modular rail panel designed to fit onto KeyMod hand guards, providing a 2'' 20mm RIS / RAS rail. The product comes as a kit and is easily built and can quickly be installed to KeyMod hand guards to allow the attachment of aftermarket Torches, Lasers, Grips and many other aftermarket attachments.

This rail is a perfect purchase for any Airsoft player who has got their hands on a new rifle and is looking to take their gun to the next level by attaching parts and accessories.

The Delta Armory 22mm Offset Angled Mount has an aluminium alloy construction, making it tough and lightweight. It is designed to install Torches, Lasers and other 20mm RIS Accessories at a 45-degree angle, which allows you to maximise the available space you have on your Airsoft Gun.

An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories. Although designed for torches, this rail could also be used to mount an offset Red Dot Sight to use as a backup to your main sight. The Delta Armory 22mm Offset Angled Mount easily attaches to 20mm Rails via the Allen Screw on the side of the unit.

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer. Attached to M-LOK system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories.

The rail is a 20mm Picatinny type, measuring roughly 2.5 inches and is attached to M-LOK system using the included screws, nuts and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

A highly useful and well-constructed 45 degree rail piece for 20mm rails, useful for getting your accessories in just the right place for you.

The AK series of rifles is famous for many things, but having the best iron sights is not one of them. The AK Rear Sight Rail For Red Dot Optics from 5KU replaces your AK's rear iron sight but retains basic functionality with its built-in emergency backup sights while providing the option to mount a red dot sight!

Designed specifically for Micro red dot sights, the 8 20mm Picatinny rail slots provide plenty of room for larger red dots but it would look rather silly. It's your AK though, make the purists cry if you feel like it!

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer.

Attached to Picatinny system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories.

The rail is a 20mm Picatinny type, measuring roughly 2.25 inches and is attached to Picatinny system using the included screws and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

If you have invested in a Tokyo Marui VSR-10 Pro and you want to add an optic, this 20mm receiver rail will do the trick! The Slong Airsoft Receiver 20mm Rail Mount For VSR-10 Sniper Rifle is designed to replace the rear iron sight on the Tokyo Marui VSR-10 Pro sniper rifle but can also be used to replace a worn-out rail on VSR-10 clones or the TM VSR-10 G-Spec sniper rifle.

The rail is constructed from aluminium and finished with matt black anodising, keeping the surface coating thin to ensure the rail remains in spec and capable of mounting any optical sight which fits 20mm Picatinny rails.

Not a fan of SMG-5 dioptre sights? I'm not sure how, but if they don't suit you then here's a way you can still shoot sharp with your SMG-5/MP5 AEG. Allows mounting of red dot sights and shorter length magnified optics. Looks extra cool with an MRDS on!

This is for those of you that want to upgrade your AK and make it more up-to date with room for customisation. Constructed from sturdy alloy, the rail system features 4 (quad) rails at the 3, 6, 9 and 12 o clock positions. The top rail offers 3.5 inches of rail real estate with the other 3 rails offering 5 inches to mount tactical equipment.

So if you find yourself wanting more room to customise your AK with more rail space, like the M4s of this world, this is what you're looking for. Designed for CYMA AKS-74U AEGs, but may potentially fit other models of AKS-74U as well. The handguard comes with a mounting device so it can be attached to the barrel and the upper handguard can be left off for those of you that prefer just running a lower.

One of the few problems with old-school cool like the SMG5 series of AEGs is that you are rather limited in rail mounting space, meaning your mission essential equipment that makes you a true operator has to be left behind. Ask the US Navy SEALs, they are known to use pipe clips and zip ties to attach rails to their MP5SD6s. You no longer have to resort to this pure bodgery, with the Extended top rail mount from CYMA you now have a Picatinny scope mount with forward M-LOK sections for tactical weapon lights, lasers, battery boxes, or anything else you need. This is all kept at the 12 o'clock position, keeping your ambi friendly SMG just that. 

An Aluminium constructed Rail Mount for AKS-74U Platform Airsoft Replicas, which will install to the Rear Ironsight Block and provide a 20mm RIS/RAS Rail for installing a Red Dot Sight. If you own an AKS-74U and you want to start decking it out with bells and whistles, then this is an ideal place to start.

If you want to add some extra accessories to your AK but you approve of neither top cover mounted optics nor the Russian side rail, this railed gas tube should do the trick! Based on the real steel UltiMAK design, the CYMA 20mm Picatinny Railed Gas Tube for AK47/74 AEG replaces the gas tube and upper handguard of your AK AEG with an aluminium enhanced gas tube with a 20mm Picatinny rail milled into its upper surface.

This style of rail has found its way onto many AKs used in the hands of both PMCs operating in the middle east and civilian tactical shooters in the US and is a great way to mount forward mounted red dot sights and tactical flashlights without doing anything weird to the receiver itself. This part is designed for the CM.04x series of AK AEGs from CYMA but will not fit AKS-74U AEGs due to the length.

If you're rocking the super-slick FABARM STF 12 Short Initial and want to top it off with an optic, this is what you need! The BO Dynamics 20mm Picatinny Top Rail for FABARM STF 12 Gas Shotguns is designed to mount to the receiver of your STF 12 via its innovative quick detach mechanism, offering a full-length 20mm Picatinny rail and light-enhancing front and rear iron sights. The front sight insert is red and the rear is green, guaranteeing you'll never mix them up in the heat of a firefight!

The rail itself is constructed from CNC machined aluminium and the iron sights are removable if you prefer to run a red dot sight. This rail fits both gas variants of the STF 12 and is ideal for the Short Initial as it doesn't include a top rail. If you've taken a tumble with your Compact variant, this rail makes a great replacement part if you simply cannot live with scratches! 

Is your SMG-5/MP-5 looking left out amongst its railed-up brethren? Here is the solution! It's all included in the box, a 20mm rail system, 2 rail covers, and a vertical grip to stop those sexy rails from slicing your hands to pieces. Cyma even throw in a metal outer barrel! It is not essential to install the outer barrel to make the rail system compatible but it is nice that it is included!

If you have a MK23 NBB pistol you might have noticed the lack of options for mounting accessories. At one point in time the MK23 was cutting edge, but in the current day and age it is in dire need of a Picatinny rail to mount some tactical goodies. Enter the Hades Airsoft MK23 rail adapter, the answer to your prayers!

If you've been looking for some extra rail space on your Novritsch SSR90, this is for you! The Novritsch SSR90 M-LOK Extension mounts to the front of your SSR90 using a screw on either side. Once attached, you have access to an additional 6 M-LOK slots, 2 on top and 4 on the offset angles.

The mount is also designed to be compatible with suppressors, meaning they will not interfere with one another when both are mounted on your platform. If you're looking for some additional rail space, to mount all the mission essentials, then the Novritsch SSR90 M-LOK Extension is exactly what you need.

If you have a SCAR and want to improve its style and functionality, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is a must! This beauty extends your SCARs rail to allow for more M-LOK attachment points. It is designed to fit major brands like Cybergun(GBB only), VFC and Tokyo Marui, but may fit others too with modification. There is a choice of either 2.2" or 4.25" so you can get the perfect extension for your desired loadout.

It is constructed from aluminium, making it very lightweight and barely noticeable when attached to the front of your SCAR. There are QD points on either side, giving you the option to add sling points or other QD attachments. There are M-LOK attachment points littered all over this handguard extension, so you have plenty of additional space for your mission essentials.

It replaces the traditional 20mm Picatinny rail section on top with an additional M-LOK slot, matching the overall sleek design of this MREX handguard and allowing you to attach a rail section if you please. If you want to turn your SCAR into a smoking hot rifle, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is certainly a step in the right direction!

If you have a SCAR and want to improve its style and functionality, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is a must! This beauty extends your SCARs rail to allow for more M-LOK attachment points. It is designed to fit major brands like Cybergun(GBB only), VFC and Tokyo Marui, but may fit others too with modification. There is a choice of either 2.2" or 4.25" so you can get the perfect extension for your desired loadout.

It is constructed from aluminium, making it very lightweight and barely noticeable when attached to the front of your SCAR. There are QD points on either side, giving you the option to add sling points or other QD attachments. There are M-LOK attachment points littered all over this handguard extension, so you have plenty of additional space for your mission essentials.

It replaces the traditional 20mm Picatinny rail section on top with an additional M-LOK slot, matching the overall sleek design of this MREX handguard and allowing you to attach a rail section if you please. If you want to turn your SCAR into a smoking hot rifle, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is certainly a step in the right direction!

If you have a SCAR and want to improve its style and functionality, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is a must! This beauty extends your SCARs rail to allow for more M-LOK attachment points. It is designed to fit major brands like Cybergun(GBB only), VFC and Tokyo Marui, but may fit others too with modification. There is a choice of either 2.2" or 4.25" so you can get the perfect extension for your desired loadout.

It is constructed from aluminium, making it very lightweight and barely noticeable when attached to the front of your SCAR. There are QD points on either side, giving you the option to add sling points or other QD attachments. There are M-LOK attachment points littered all over this handguard extension, so you have plenty of additional space for your mission essentials.

It replaces the traditional 20mm Picatinny rail section on top with an additional M-LOK slot, matching the overall sleek design of this MREX handguard and allowing you to attach a rail section if you please. If you want to turn your SCAR into a smoking hot rifle, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is certainly a step in the right direction!

An Aluminium constructed rail adaptor for KeyMod rail systems.

If you are rocking a KAR98k but you want some modern glass, this is a great way to get the job done! The 20mm Picatinny rail mount from Double Bell is designed to fit to their KAR98K sniper rifle and provide a 20mm rail above the receiver, allowing you to mount modern optical sights. The rail mounts into the rear sight mounting apparatus and provides you with 17 slots of 20mm rail, plenty to mount whatever you like. We advise against adding a PEQ, flashlight and T1 but it's your gun and there is enough space, just be ready to run if a reenactor spots you!

An Airsoft modular rail panel designed to be fit onto MLOK hand guards, providing a 4'' 20mm RIS / RAS rail. The kit comes as a kit and is easily built and can quickly be installed to MLOK hand guard to allow the attachment of aftermarket Torches, Lasers, Grips and many other aftermarket attachments.

This rail is perfect purchase for any Airsoft player who has got their hands on a new rifle and are looking to take their gun to the next level by attaching parts and accessories.

A set of six Polymer 20mm Rails which will fit into KeyMod or M-LOK slots to provide a more standard rail where there normally would not be.

A set of six Polymer 20mm Rails which will fit into KeyMod or M-LOK slots to provide a more standard rail where there normally would not be.