Refine results
Refine by
Viewing 27 of 27.
grid
list
£10.99
  • Pack Of 6
  • Fits To Cylinder Head
  • May Reduce FPS Slightly

Can be fitted inside other rifles including AEG gearboxes. The sorbo pad works by absorbing impact from your piston head, please note you should expect an FPS loss so you may have to improve the air seal or fit a slightly larger spring to regain your desired FPS.

£13.95
  • Stabilise Shots
  • Improves Air Seal
  • Reduce Power Loss

An upgrade hop bucking for Tokyo Marui and other compatible products. Designed for the Tokyo Marui VSR-10 bolt action and blow back pistols in mind including the Hi-Capa 4.3, Hi-Capa 5.1, M1911A1, SIG P226, SOCOM MK23 and G26. 

£13.99
  • Reinforced tappet plate
  • For version 3 gearbox - AK, AR36, AUG etc.
  • Important for high rate of fire builds

If you are tuning your gearbox for a high rate of fire build a reinforced tappet plate is a must for your shopping list. The Perfect Tappet Plate from Laylax replaces your original tappet plate to keep your AEG running for longer at high speed thanks to its reinforced polymer construction. 

£13.99
  • Reinforced tappet plate
  • For the Tokyo Marui Next Generation recoil system gearbox
  • Important for high rate of fire builds

If you are tuning your gearbox for a high rate of fire build a reinforced tappet plate is a must for your shopping list. The Perfect Tappet Plate from Laylax replaces your original tappet plate to keep your Tokyo Marui NGRS AEG running for longer at high speed thanks to its reinforced polymer construction. 

£15.99
  • Replaces the magazine "knocker valve"
  • Improves consistency and velocity variation
  • Adjustable power - Tune your FPS to field limits!

If you are running the ultimate sniper pistol, the Tokyo Marui MK23 SOCOM, we are sure you are the type of person who appreciates consistency and accuracy in your setup. That being the case, we recommend the Neo R Adjustable High Flow Bullet Valve from Laylax Nine Ball to bring your MK23 up a notch in consistency, improving its accuracy and offering adjustable velocity; allowing you to tune your MK23 to the very edge of site limits to gain every advantage you can! This valve replaces the knocker valve in your magazine and will require a valve key for installation. 

£18.99
  • Reinforced stock locking/folding button
  • For Tokyo Marui SCAR-L and SCAR-H Next Gen
  • Adds strength and reduces stock wobble

If your TM SCAR has developed a wobbly stock, or you are worried that it may do in the future, this is the part you need to sort it out! Introducing the Hard Stock Button from Laylax, a replacement for the original stock locking/folding button on the Tokyo Marui SCAR-L and SCAR-H Next generation recoil shock AEGs. The button is constructed from reinforced polymer, providing additional strength over the original stock button, guaranteeing reliable stock locking and eliminating wobble. The set also includes the stock button spring. 

£19.99
  • Stainless Steel
  • Improved Air Seal
  • Tapered Internal Face

A must have upgrade component, featuring high quality materials and fine craftsmanship, proven time and time again to improve the air seal of your VSR/BAR-10 sniper rifle. 

£25.99
  • Aluminium construction
  • Fits both 20mm Picatinny and 11mm Dovetail 
  • For VSR-10 sniper rifle and clones

If you own a VSR 10 Pro Sniper and want to mount an optical sight to extend your range this part is a highly flexible solution! The PSS10 VSR-10 Scope Mount Rail from Laylax is an innovative hybrid scope rail, combining 20mm Picatinny and 11mm Dovetail mounting solutions, offering you all the options as to what scope you choose for your setup. 

£29.99
  • 95mm Long
  • Stainless Steel
  • Bearing Spring Guide

A two-piece stainless steel VSR/BAR10 spring guide, designed for enhanced performance and efficiency. The guide is compatible with most Airsoft springs featuring an internal diameter of 11mm or smaller. 

£29.99
  • Adjustable trigger
  • For Krytac Kriss Vector
  • Aluminium construction - Matt silver finish

There was a point in time when the Kriss Vector was a unique gun in its own right, but due to the platform's awesome looks and exceptional Krytac internals, the Vector becomes more and more of a common sight at a skirmish. The Custom Adjustable Trigger from Laylax has arrived just in time to keep your Vector looking fresh and turning heads!

£29.99
  • Adjustable trigger
  • For Krytac Kriss Vector
  • Aluminium construction - Matt black finish

There was a point in time when the Kriss Vector was a unique gun in its own right, but due to the platform's awesome looks and exceptional Krytac internals, the Vector becomes more and more of a common sight at a skirmish. The Custom Adjustable Trigger from Laylax has arrived just in time to keep your Vector looking fresh and turning heads!

£29.99
  • Aluminium construction
  • Extended design for fast access
  • Compatible with Tokyo Marui Hi-capa and 1911

An extended slide release is a great way to speed up your reload and encourage a consistent grip position on your pistol. The Custom Extended Slide Stop from Laylax is machined from aluminium and provides a considerable extension to the standard slide stop on a 1911 or Hi-capa GBB pistol with helpful serrations machined into its upper surface to provide enhanced grip. 

From £34.99
  • Stainless Steel
  • 6.03mm Tight Bore
  • Increased Performance

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

£34.99
  • Skeletonised hammer with hexagonal design
  • Compatible with Tokyo Marui Hi-capa and clones
  • Available in silver, black, or heat gradation finish


If you are planning a Hi-capa overhaul the Custom Hammer from Laylax Nine Ball is a great choice to not only improve the feel of your trigger but add some style points too. This hammer is a skeletonised design with weight-reducing ports machined into the hammer in a hexagonal shape, giving the hammer an ultra-modern look. The hammer is constructed from aluminium, keeping the weight low for maximum performance whilst boasting added strength when compared to most alloy hammers provided out of the box.

£39.99
  • High density polymer construction
  • Unique custom styling
  • Optics ready with backup iron sights

So your MK23 shoots as flat as a pancake out to 50m, why not give it some glass so you can take pure advantage of that impressive performance? Introducing the Laylax Nine Ball Custom "Gungnir" slide, an optics ready replacement slide for the TM MK23 and its clones, sporting a modernised design with two sets of backup iron sights. This slide is constructed from high density polymer, keeping the weight of your pistol to a minimum whilst giving it the added flair and functionality which comes with a custom slide. If you are looking for a way to add an optic to your MK23, this is the easiest and best looking (in our opinion) option out there!

£54.99
  • Stainless Steel
  • 6.03mm Tight Bore
  • Bridged Inner Barrel

Used by staff and many Airsofters a like to improve your range and accuracy. When combined with the right weight BB, hop-up rubber and patience this barrel delivers killer accuracy down range. 

£54.99
  • Stainless Steel
  • 6.03mm Tight Bore
  • Bridged Inner Barrel

Used by staff and many Airsofters a like to improve your range and accuracy. When combined with the right weight BB, hop-up rubber and patience this barrel delivers killer accuracy down range. 

£54.99
  • Quick-release holster
  • Spring loaded draw assist
  • For TM MK23 SOCOM and clones

MK23 users should know by now what a nightmare it is to find a decent holster for this gargantuan pistol. By popular demand, Laylax has focussed their attention on the "snipers best friend", and have provided another option for MK23 users wanting to move away from the fabric universal holsters to something more suited to the 21st century. The Breakout Holster is constructed predominantly from reinforced polymer, with an alloy internal mechanism and steel springs, to provide the flagship feature of this holster; its spring loaded draw assist mechanism!

£59.99
  • High density polymer construction
  • Weighs almost nothing
  • Optics ready with back up iron sights

If you want to turn your Hi-capa into a sci-fi looking speed demon, the Custom "Gungnir" slide from Laylax Nine Ball is about the best solution! This slide is constructed from high density polymer, meaning it tips the scales at an astonishingly low 43g! This also includes an integrated optics mounting plate, and two sets up back up iron sights, ready in case your optic goes down. This is the lightest slide we sell by a wide margin, and the lighter your slide the faster your pistol will cycle! 

£59.99
  • Hardened steel gearset
  • 18:1 Ratio
  • For TM Next Gen Recoil Shock gearbox

If you are looking to further extend your advantage and push your TM NGRS system to the limits reinforced gears are a must for long term reliability under increased stress. The Laylax EG Hard Gear Set is specifically designed for the Tokyo Marui Next Generation Recoil Shock (NGRS) gearbox and includes a hardened steel spur gear, sector gear and bevel gear. This gearset is a standard ratio set (18:1), intended to provide a great compromise between high speed and high torque, allowing you to take your build in either direction and still benefit from reinforced gears!

£99.99
  • Teflon Coated
  • Stainless Steel
  • Incredibly Strong

For the smoothest and strongest bolt pull for your Tokyo Marui, CYMA or JG VSR-10 Pro and G-Spec sniper rifles. 

£189.99
  • 90 Degree Catch
  • Strong & Reliable Unit
  • Incredibly Smooth Release

The must have trigger unit and piston combination for any Airsoft sniper using a VSR/Bar-10 compatible platform. A 90 degree setup results in unreal strength for some incredibly strong spring choices.

£12.99
  • For MARUI Recoil
  • High Quality Steel
  • Consistent Results

A high quality steel-made spring for Tokyo Marui Recoil gearboxes, manufactured by Laylax and should yield you around 90m/s or 100m/s (depending on which spring you choose) with a 0.2g BB.

£29.99
  • Aluminium construction
  • Flat-faced trigger for additional speed
  • Dazzling heat gradation finish

Hi-capa GBB pistols are probably the most customisable pistol on the Airsoft market, and with every day and every new release, they extend their lead! Introducing the Straight Trigger "Gamma" from Laylax, a precisely machined aluminium trigger with a stylish swept-back design, and a flat face to allow for faster firing. This trigger is finished in attractive metallic heat gradation colouration, giving the trigger an added touch of flair, making your Hi-capa stand out amongst the masses!

£49.99
  • Stylish fluted outer barrel
  • Heat Gradation finish
  • Aluminium construction

If you have plans for a head-turner of a Hi-capa build with some serious flair, we have the perfect outer barrel for you! Introducing the Laylax Fluted Outer Barrel, an aluminium replacement for your original outer barrel finished in a beautiful and eye-catching heat gradation look. This outer barrel is compatible with the Tokyo Marui Hi-capa 5.1 GBB pistol and its clones. 

£59.99
  • Hardened steel gearset
  • 18:1 Ratio
  • For Version 2/3 Gearbox

If you are looking for exceptional performance for your AEG, either for a high rate of fire build or a DMR running at higher than normal FPS reinforced gears are a must for long term reliability under increased stress. The Laylax EG Hard Gear Set is compatible with any AEG with a version 2 or version 3 gearbox and includes a hardened steel spur gear, sector gear and bevel gear. This gearset is a standard ratio set (18:1), intended to provide a great compromise between high speed and high torque, allowing you to take your build in either direction and still benefit from reinforced gears!

£79.99
  • CNC aluminium construction
  • M-LOK and 20mm Picatinny combination
  • Handguard extension for Krytac Kriss Vector

If you are planning on loading up your Kriss Vector with a full complement of tactical equipment, this will be useful! The Laylax Nitro Vo M-LOK Handguard is intended to provide the Krytac Kriss Vector with additional rail space in the form of both Picatinny and M-LOK, and a longer handguard for use with more modern shooting stances. The handguard is constructed from aluminium using CNC processes to provide a flawless shape and keep the weight low, and is coated in a hard wearing black anodised finish. If you are looking for a way to c-clamp your vector without getting in the way of the charging handle, you need this!