- 450rnd Capacity
- Extended 40rnd style design
- For M4/AR15 AEG Rifles
Looking for an interesting mag for your M4? The Battleaxe 450rnd Polymer Magazine for M4/AR-15 AEGs is designed for the M4/AR15 AEG but should work in most compatible platforms, and is based on the extended 40rnd style magazine which gives your primary a more beastly, aggressive look. The magazine is a wheel-wound high-cap design with its winding wheel located on the baseplate and it is filled via the fill window at the top of the magazine body.
Either side of the magazine has a modern hex-style texture to provide extra grip when pulling the magazine from a pouch or reloading. It also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG loadout with a cutting-edge, modern look!
- Real wood furniture
- For spring-powered SVDs
- Give your replica an extra kick of realism!
If you own a spring-powered SVD Dragunov, but you're missing the real wood furniture, then this conversion kit should interest you! The Battleaxe SVD Wood Conversion Kit contains a real wood stock and handguard, both of which have been meticulously crafted to ensure a superb and realistic finish. The varnish finish provides a subtle sheen with the wood grain that shows through, faux wood or polymer can never look this good!
- Real wood construction
- For CM.033 M1A1 Thompson
- Give your AEG the authentic look!
If you own a CM.033 M1A1 Thompson AEG replica, this will most certainly be of interest to you! Introducing the Battleaxe Real Wood Furniture Kit for CM.033 M1A1, a set containing a real wood stock, handguard and pistol grip all authentically profiled to match the real M1A1 SMG. The parts in this kit are all perfectly finished to provide a subtle sheen with wood grain showing through which even the best faux wood cannot match.
- Real wood construction
- Set includes: Upper & lower handguard
- Compatible with most AK-47/74 AEGs
If you want a new look for your CYMA AK or you're building the big boy RPK series, Battleaxe has the kit for you! The RPK Wood Conversion Kit for AK-47/74 is designed to fit most AK47 and 74 variants, it does NOT fit AKS-74U. The set includes a real wood upper handguard and lower handguard with a foregrip beautifully finished to mimic the real thing. The Romanian style features a vertical foregrip on the lower handguard, ever so slightly more ergonomic than the classic Russian platform.
The attention to detail paid by Battleaxe in this kit is evident when you notice the super-realistic laminated plywood construction, just like real Russian AK wood. While this wood may not be as strong as the real Russian stuff, it's ample for Airsoft use and looks far better than cheaper alternatives. Whether your objective is to build a seriously unique AK or complete your RPK support gun build, this Wood Conversion Kit is a fantastic option!
- Real wood construction
- Set includes: Upper & lower handguard, stock
- Compatible with most AK-74 AEGs
If you want to return your AK-74 to its original roots, Battleaxe has the kit for you! The Battleaxe Wooden Conversion For AK-74 is designed to fit most AK-74s such Tokyo Marui, CYMA and G&G. It will fit other brands too but may need modification in order to properly attach it. The set includes a real wood upper handguard, lower handguard and stock beautifully finished to mimic the real thing.
The attention to detail paid by Battleaxe in this kit is evident when you notice the super-realistic laminated plywood construction, just like real Russian AK wood. This is great for the stitch counters, and while this wood may not be as strong as the real Russian stuff, it's ample for Airsoft use and looks far better than cheaper alternatives. Whether your objective is to build a seriously unique AK or give it an iconic look, this Wood Conversion Kit is a fantastic option!
- Real wood construction
- Set includes: Upper & lower handguard, pistol grip
- Compatible with most brands' AKMSU
If you want that classic look for your AKMSU or maybe your Airsoft replica needs an external repair, Battleaxe has the perfect kit for you! The Battleaxe Wooden Conversion For AKMSU is designed to fit most AKMSUs, however, modification may be required. The set includes a real wood upper handguard, lower handguard and pistol grip beautifully finished to mimic the real thing.
The attention to detail paid by Battleaxe in this kit is evident when you notice the super-realistic laminated plywood construction, just like real Russian AK wood. While this wood may not be as strong as the real Russian stuff, it's ample for Airsoft use and looks far better than cheaper alternatives. Whether your objective is to build a seriously unique AK or complete your RPK support gun build, this Wood Conversion Kit is a fantastic option
- Real wood construction
- Set includes: Upper & lower handguard, stock
- Compatible with most AKM AEGs
If you want to return your AKM to its original roots, Battleaxe has the kit for you! The Battleaxe Real Wood Furniture Kit for AKM is designed to fit most AKMs such as Tokyo Marui, CYMA and G&G. It will fit other brands too but may need modification to properly attach it! The set includes a real wood upper handguard, lower handguard and stock beautifully finished to mimic the real thing.
The attention to detail paid by Battleaxe in this kit is evident when you notice the super-realistic laminated plywood construction, just like real Russian AK wood. This is great for the stitch counters, and while this wood may not be as strong as the real Russian stuff, it's ample for Airsoft use and looks far better than cheaper alternatives. Whether your objective is to build a seriously unique AKM or give it the realistic style it deserves, this Wood Conversion Kit is a fantastic option!
- Real wood conversion kit
- For M1928 Thompson AEGs
- Make your Tommy Gun more authentic!
If you want to bring your M1928 Thompson AEG up a level in realism, this conversion kit will do it! The Battleaxe Real Wood Furniture Kit for CM.051 M1928 Thompson comprises a real wood stock, a real wood vertical foregrip/handguard and a real wood pistol grip.
To fit this conversion kit you will screws and mounts from the original CM.051, the kit only includes the real wood furniture. This kit is designed for the CM.051 Thompson AEG, it may fit other brands but modification will be required. If your CYMA Thompson needs an added dose of authenticity, a real wood kit is the way to go!
- Steel Shell
- Extended Mag
- No Battle Rattle
This Steel constructed 200rnd Magazine from Battleaxe is an extended design, which makes it slightly longer than your typical STANAG design. It is a Mid-Cap Magazine, meaning it is filled using a Speedloader, doesn't rattle like a High-Cap and will also feed until the Magazine is depleted, with no winding! If you own an AR platform rifle and you don't want to wind your magazines, and you want the ability to sneak up on your enemy without the tell-tale battle-maracas sound of a High Cap Magazine shaking away, then this is the Magazine for you.
- Mock Bullets
- Unique Design
- TM Compatible
A gorgeous Polymer constructed Mid-Cap magazine which is compatible with most brands of AR/M4/M16 platform rifles, including standard Tokyo Marui replicas.
- Mock Bullets
- Unique Design
- TM Compatible
A gorgeous Polymer constructed Mid-Cap magazine which is compatible with most brands of AR/M4/M16 platform rifles, including standard Tokyo Marui replicas.
- Hex Pattern
- TM Compatible
- 200rnd Capacity
A Mid-Capacity Magazine for AR Platform Rifles (such as AR-15, SCAR, TAVOR, ARX100), that is filled using a Speedloader to fill BBs through the top of the Mag. It will then quietly and effectively feed BBs into your Gun until empty, with no rattle unlike High-Cap Magazines. With an attractive hex pattern, this is an eye-catching Magazine that looks great in any AR Platform Airsoft Gun. Not only this, but it is compatible with Tokyo Marui (TM) Replicas too.
- Mid-Cap Design
- For AR-10/SR-25
- Modern P-Mag Type
A Polymer constructed Mid-Cap Magazine for AR-10/SR-25 Platform Rifles. The Magazine features a modern P-Mag Style aesthetic with mock bullets seen through the window on the Mag, and a 220rnd capacity. The Mag is filled using a Speedloader, and will feed your Gun until empty, with no rattling or winding required.
- Shotgun to STANAG
- Magazine Adaptor
- Accepts M4 Mags
This is a Magazine Adapter for Airsoft Shotguns, allowing you to use any M4/M16/STANAG Magazine and maximise the effectiveness of your replica. Yeah, your Shotgun is pretty cool.... But wouldn't it be even better with a Drum Magazine sat underneath?
- Polymer construction
- 80 round Capacity
- For AUG AEGs
A tough-constructed Polymer magazine for the AUG series which is a Mid-Cap design and holds a total of 80rnds. It is based around a waffle textured polymer mag design with cool styling and mock bullets visible through the side window, making a nice change from the traditional transparent AUG magazine design. It is loaded from the top using a Speedloader and will feed BBs until empty without making the annoying rattle of a High-Cap magazine.
- Twist and lock coupling system
- 150rnd mid cap
- Translucent polymer
Introducing a unique and efficient interlocking magazine system. Simply place the mags together at the small circular extrusions at 90 degree angles, twist and boom! Locked in place.
This means you can have multiple mags locked and ready to reload without the need of mag pouches, plus it doesn't have to be just two interlocking mags, it could be more depending on how adventurous you're feeling!
Constructed from high density polymer with a translucent design, this magazine holds 150 BB's and is a mid-cap magazine, meaning no battle rattle! The magazine can be filled through the fill/feed port at the top of the magazine using a standard Airsoft speed loader.
- Thumb Rest
- For 20mm RIS
- Allen Key Mount
A Polymer constructed Thumb Rest for 20mm RIS Rail Systems, which will provide a stable platform to comfortably brace the front of your replica, enhancing ergonomics and improving comfort when aiming for long periods of time.
- Stubby Design
- Steel Outer Shell
- VN/Vietnam Style
A Mid-Cap Magazine for M4/M16 Platform Airsoft Guns, which is made with a Steel Outer Shell to make it tough, well weighted and realistic. It has a 'stubby' design as seen in the M16s of the Vietnam War Era, and is a Spring-Loaded design which will feed all the BBs until empty without the need for winding. This is ideal for DMRs or Period Replicas, or for anyone who wants Mid-Cap Magazines that are low profile and won't get snagged on your kit as much as full size ones.
- Stubby Design
- Steel Outer Shell
- VN/Vietnam Style
A Mid-Cap Magazine for M4/M16 Platform Airsoft Guns, which is made with a Steel Outer Shell to make it tough, well weighted and realistic. It has a 'stubby' design as seen in the M16s of the Vietnam War Era, and is a Spring-Loaded design which will feed all the BBs until empty without the need for winding. This is ideal for DMRs or Period Replicas, or for anyone who wants Mid-Cap Magazines that are low profile and won't get snagged on your kit as much as full size ones.
- High-density polymer construction
- Compatible with M4/AR-15 AEGs
- Improve your AEGs ergonomics
The Battleaxe Pistol Grip gunfighter mod.2 for M4/AR-15 AEGs has a cutting-edge grip design with a more vertical angle than other conventional grips, designed specifically for increased comfort in modern shooting stances. This grip also includes a motor baseplate constructed from polymer.
The unique and modern shape of the grip improves comfort and enhances shooting accuracy. As a result, shooters can focus on their target, minimizing hand and arm fatigue whilst taking part in extended skirmish operations. This pistol grip is perfect for those seeking the perfect balance between functionality and ease of use, it also gives your AEG a unique look.
- O-Type
- Steel Made
- Vital Spare Part
This Motor Pinion Gear is an O-Type design, constructed from Steel and made for Airsoft Electric Guns to replace broken, damaged or worn parts. If Pinion Gear has lost teeth or worn down, it's only a matter of time before it stops working completely; stock up on vital spare parts like the Battleaxe Steel Motor Pinion Gear, today.
- 2000rnd Capacity
- For A&K FN MK46 MOD 0 T8 LMG
- Auto winding and sound control features
If you are looking for a second box magazine for longer operations or just because you have trigger-happy tendencies, Battleaxe is here to sort you out! The Battleaxe 2000rnd Box Magazine for T8 MK46 LMG - Sound Control is designed ONLY for the A&K FN MK46 MOD 0 T8 LMG AEG. The fill window of this beast of a magazine can be found at the top on a hinge making it easy to pour entire bottles of BBs in!
The magazine itself is constructed from polymer with a fabric cover, the feed tubes coil up from the box and are made from steel, guaranteeing strength. This magazine boasts both sound control and auto winding mode, meaning you have the choice between winding up the magazine with a flip of a switch or letting it do the winding automatically when it detects your AEG firing. Perfect for those who want to spend more time shooting and less time winding!
Unzip the fabric cover and you will find at the bottom of the magazine there is a switch with three settings and the battery compartment. The central position is the "off" position, pushing the switch into its named position activates either the sound control or "auto-winding" mode respectively. The battery compartment lid comes off and reveals space for a 9V battery, this is crucial for the magazine to function
- 2000rnd Capacity
- For A&K FN MK46 MOD 0 T8 LMG
- Auto winding and sound control features
If you are looking for a second box magazine for longer operations or just because you have trigger-happy tendencies, Battleaxe is here to sort you out! The Battleaxe 2000rnd Box Magazine for T8 MK46 LMG - Sound Control is designed ONLY for the A&K FN MK46 MOD 0 T8 LMG AEG. The fill window of this beast of a magazine can be found at the top on a hinge making it easy to pour entire bottles of BBs in!
The magazine itself is constructed from polymer with a fabric cover, the feed tubes coil up from the box and are made from steel, guaranteeing strength. This magazine boasts both sound control and auto winding mode, meaning you have the choice between winding up the magazine with a flip of a switch or letting it do the winding automatically when it detects your AEG firing. Perfect for those who want to spend more time shooting and less time winding!
Unzip the fabric cover and you will find at the bottom of the magazine there is a switch with three settings and the battery compartment. The central position is the "off" position, pushing the switch into its named position activates either the sound control or "auto-winding" mode respectively. The battery compartment lid comes off and reveals space for a 9V battery, this is crucial for the magazine to function
- 150rnd Capacity
- Rubber Baseplate
- Mock Bullet Window
This Magazine is designed for Airsoft M4/AR Platform Electric Guns, and features a gorgeous, modern design with Mock Bullet Window and Thick Rubber Baseplate. It holds a total of 150rnds and is filled from the top using a Speedloader. If you need an ultra modern Magazine to finish off your Custom M4 build, then the Battleaxe 150rnd Mid-Cap Polymer Magazine for AR-15/M4 is the ideal choice.
- TM Compatible
- 150rnd Capacity
- For AR / M4 / M16
A Polymer constructed Magazine for AR / M4 / M16 Platform Airsoft Replicas, which holds 150rnds total in a Spring-Fed Mid-Cap design that will feed all the BBs until empty, with none of the rattle that you get from High Cap Magazines. Compatible with a range of brands such as CYMA, DBoys, JG, A&K, Arcturus and Tokyo Marui, this is the perfect purchase for any AR Platform operator wanting to stay in the fight for longer without refilling mags.
- Steel Shell
- Extended Mag
- No Battle Rattle
This Steel constructed 200rnd Magazine from Battleaxe is an extended design, which makes it slightly longer than your typical STANAG design. It is a Mid-Cap Magazine, meaning it is filled using a Speedloader, doesn't rattle like a High-Cap and will also feed until the Magazine is depleted, with no winding! If you own an AR platform rifle and you don't want to wind your magazines, and you want the ability to sneak up on your enemy without the tell-tale battle-maracas sound of a High Cap Magazine shaking away, then this is the Magazine for you.
- For M4/AR15 AEG platform
- Powered by a 9V battery (not included)
- Auto-winding - Sound control or manual
The 3000rnd Electric C-Mag Drum Magazine for M4/AR15 AEG is a great tool for those with a heavy trigger finger! This is an Electric Drum Magazine for M4/AR15 AEG platform Airsoft guns constructed using high density polymer to keep things light and easy to move with quickly.
This magazine accepts a 9V battery (not included) and will constantly wind BBs through the mechanism when the switch is set to "wind" and will wind only when the AEG is fired when using the "sound control" mode. If you aren't sure whether a Support Gun is for you, a C-mag allows you to sample the role without taking the plunge on a proper LMG!
- Rechargeable Battery
- Sound/Pressure/Auto
- For M249 Support Guns
An Electric Box Magazine for M249 Support / Light Machine Guns, that holds a total of 1500rnds and is powered by an included Rechargeable Battery. The Magazine has a variety of options and can be operated using an included Pressure Pad, can be set to wind constantly, and there is also a 'Sound Control' mode. This mode will only wind the Magazine when it can hear the Gun firing, which is the mode you'll most likely end up using. Included in the box is a Rechargeable Battery and Charger. All you need to do is charge the Battery, install it in the Magazine, pour your BBs in and set the winding mode you want to use. Easy as that.
- 150rnd Capacity
- Modern polymer magazine design
- For M4/AR15 and SCAR-L/L85/416 AEGs
Looking for modern M4/AR15 AEG magazines? You've found what you need in the Battleaxe 150rnd Polymer Magazine! This mag is designed for the M4/AR15 AEG platform but should also fit most SCAR-L, 416 and L85 style AEGs. The magazine is constructed from rock solid high density polymer and holds a respectable 150 BBs which are loaded through the fill/feed port on the top of the magazine body. This is a spring-loaded mid-cap, meaning it won't rattle as you run and give your position away.
- 1000rnd Capacity
- Auto/sound winding
- For M4/AR15 AEG platform
The 1000rnd Dual Magazine for M4/AR-15 AEG is a great tool for those with a heavy trigger finger but who like to look as tactical as possible! This is an Electric Drum Magazine for M4/AR15 AEG platform Airsoft guns and is constructed from high-density polymer and steel to keep things extremely durable and also lightweight to maintain manoeuvrability.
This magazine accepts a 9V battery (not included) and will constantly wind BBs through the mechanism when the switch is set to "wind" and will wind only when the AEG is fired when using the "sound control" mode. If you aren't sure whether a Support Gun is for you, this mag allows you to sample the role without taking the plunge on a proper LMG!
About Battleaxe Airsoft
Battleaxe Airsoft specialises in magazines for Airsoft AEG rifles, ranging from low-capacity and adjustable capacity magazines ideally suited to Milsim Airsoft skirmishes to beastly drum magazines with massive capacity for those with a heavy trigger finger.
Whether you are running an AK, M4/AR15, SMG-5, AR36 or anything else, Battleaxe has you covered for magazines no matter your preference. Battleaxe Airsoft magazines range from mid-cap mags holding up to 200 BBs to high-capacity wheel wound magazines which use a clockwork mechanism to provide upwards of 300 BBs in a single magazine. As we might expect, Battleaxe also offers drum magazines for a remarkably low price. Firepower has never been cheaper!
With replicas of many famous real steel magazines made from high quality materials at a rarely seen price point, it has never been more affordable to kit yourself out with a full loadout of mags so you can spend more time shooting and less time fiddling with your speed loader!