Refine results
Refine by
Viewing 30 of 45.
grid
list
£3.99
  • Vented Base
  • Screws included
  • Large adjustment screw

An ventilated, alloy constructed replacement base plate for a standard M4 AEG motor base plates in pistol grips. 

£9.99
  • Distinctive Skull Logo
  • 14mm CCW Threads
  • 196mm Long



Constructed from durable alloy and is foam filled to assist in suppressing muzzle sounds. 

£9.99
  • Easy To Mount
  • Lightweight & Durable
  • Internal Hidden Storage

A perfect grip for people with all sized hands. Secures in no time with only one bolt to care about.

£9.99
  • 14mm CCW Thread
  • Accurate Markings & Insignia
  • Covers Extended Outer Barrels

An Airsoft mock suppressor, designed to replace an Airsoft gun's flash hider, and featuring an imitation of the US SOCOM special operations forces weapon suppressor. 

£9.99
  • Alloy construction with steel bolt
  • For 20mm Picatinny rails
  • Riser mount - Raise your optic by 1-inch

Having trouble getting a good view down your red dot sight when wearing full-face protection? A riser mount is what you need! This riser mount attaches to any 20mm Picatinny rail and provides a raised rail section approximately 4cm long, allowing a low-profile micro red dot sight to be far more visible when using facial protection, helmets and other headgear that might get in the way. The use of a riser mount has the added benefit that it gives you a greater ability to acquire your optic when shooting in unconventional positions and helps encourage a more upright and relaxed shooting stance.

£10.99
  • For EU Series
  • Very Strong Mount
  • 20mm RIS/RAS Rails

A 20mm Railed Mount for EU Series Airsoft Pistols, simply sliding onto the Flashlight/Laser Slot on the underside of the frame, and providing you with both a 20mm Rail for a Sight or Scope, as well as an underside 20mm Rail for a Torch, Laser or other single slot accessory. Unlike other Frame Mounts, this one is push fit with a spring-loaded release button for easy installation and removal.

£11.99
  • 14mm CCW Thread
  • Accurate Trademarks
  • Foam Filled Suppressor

A Mock Suppressor designed to fit on Airsoft 6mm BB Gun Assault Rifles, and is branded to look like it is a Special Forces SOPMOD Supplied Suppressor. 

£12.99
  • 19.3cm Long
  • Looks Great On M4
  • Fits To Birdcage Flashhider

This alloy suppressor is designed to fit easily onto rifles with an AR birdcage-style flash hider.

£29.99
  • 30mm Lens
  • Red / Green Dot
  • 1x Magnification

A red and green dot sight designed to be attached to the top of Airsoft Guns and Weapons to allow for quicker target aquisition than traditional Iron Sights. 

£34.99
  • Tool-less Fitting
  • Red and Green Illumination
  • Realistic Markings and Engravings

Compact red and green dot holographic clone airsoft sight, suitable for any AEG or GBB primary. Also has realistic markings, including laser warning. Illumination has up to 10 levels of micro-brightness adjustment in both red or green lighting mode.

£34.99
  • For 20mm Rails
  • Large Sight Picture
  • Red/Green Reticule

An Alloy constructed "Holographic Red Dot Sight" which is designed for 20mm RIS/RAS, making it compatible with almost every Airsoft Gun. It has tactile Rubber buttons on the side to control the brightness and colour of the classic reticule which these sights are known for.

£39.99
  • 3-9 x 40E Zoom
  • High Mounts Included
  • Illuminated Cross Optic

An upgraded optic over the traditional standard 3-9x40 alternative. The E version comes with illumination settings with adjustable Red levels of brightness. Also included is a 5cm long sun shade that comes pre fitted within the box. 

£39.99
  • Illuminated
  • Flip up Lens Covers
  • Excellent Zone Range

A powerful adjustable telescopic sight for Airsoft weapons, featuring a 40mm lens, and adjustable 3x to 9x zoom. The sight is constructed from Alloy and comes with flip up lens covers for transport and mounting rings. 

£39.99
  • Adjustable Illumination
  • Tool-less Assembly and Fitting
  • Realistic Markings and Trademarks

Get the operator look with this holographic clone sight, with adjustable red or green illumination. The alloy outer frame features realistic military trademark and a laser warning label.

£45.99
  • 3-9 x 50 Zoom
  • High Mounts Included
  • NON-Illuminated Cross Optic

The perfect Airsoft sniper rifle scope. Comes with scope rings, lens cleaning cloth, user manual and protective lens covers. Everything you need to stick straight on your RIF. 

£54.99
  • Illuminated Reticule
  • Integrated Rail Mount
  • 20mm Compatible Rails

An Alloy constructed telescopic sight with more magnification than standard, an illuminated reticule and an integrated mount that is ready to attach to 20mm RIS rails straight out of the box.

£57.99
Was £64.99
Save £7.00
  • Ultra-Low Profile
  • Alloy Construction
  • Momentary and constant On/Off Switch

For those looking for the ultimate low profile pistol torch, stop searching! You've found it, powered by a single AAA battery you can dazzle your targets for hours without having excessive weight and bulk at the front of your Airsoft pistol.

£74.99
  • Parallax Adjust
  • Illuminated Reticule
  • Scope Rings Included

A medium to long range engagement optic for Airsoft / Backgarden use which is adjustable from 3.5x to 10x magnification, features a Mil-Dot reticule, illuminated reticule, tool-less adjustments and an included set of scope rings.

£142.99
  • Very Clear Scope
  • Authentic Reticule
  • For Dovetail Mounts

A 4 x telescopic sight specifically designed for SVD variant rifles that have a dovetail side mount for optic rails. The scope attaches directly to the dovetail mount by releasing the lever, sliding the scope into place and locking the lever back in place.

£7.99
  • For Large Scopes
  • High Profile Mounts
  • Quick Release Screws

A pair of raised scope mount rings, designed to fit 20mm RIS / RAS rails on Airsoft and Air Rifles. 

£7.99
  • 2x Scope Mounts
  • Alloy Construction
  • Low Profile Mounts

Mount your scope lower to your rail and outer barrel for improved accuracy down range. Two mounts per box allows you to hold a scope tube diameter up to 1 inch wide. Tools are also included to aid in assembly and setup.

£7.99
  • Easy Installation
  • High Profile Mounts
  • For Scopes Up To 30mm

A set of high profile mount rings for scopes up to 30mm wide, which attaches to a 20mm rail and provides a solid platform for you to use your optic.

£8.99
  • Pair of Rails
  • For AR36 & G3
  • Install Weapon Accessories 

A pair of 20mm RIS Rail sections for AR36C/K and G3 hand guards, designed to screw into place onto the handguards.  

£8.99
  • Textured Grip
  • Finger Ridge Design
  • For AK47/74 Platform

A replacement pistol grip for AK Platform weapons, such as the AK47 and the AK74. The grip itself is constructed from lightweight polymer.

£8.99
  • Easy To Fit
  • Raises 1 Inch
  • Quick Release Bolt

A mountable RIS / RAS rail raiser which allows the user to increase the height at which their Sights and attachments sit to bring them to the correct height. 

£8.99
  • Tool-Free Fitting
  • Iron Sight Compatible
  • Raises By 0.5" / 12.5mm

A small and compact riser mount, designed to raise up your Airsoft gun's optics, allowing users with full face protection to properly aim their Airsoft gun. 

£9.99
  • For EOTech
  • Mesh Cover
  • Protect Sights

A lens protector for EOTech style Airsoft sights, designed to protect the lens of your Sight from damage from BBs and other incoming projectiles. 

£9.99
  • Hollow Center
  • Very Secure Fitting
  • Fits Any 20mm Rail

A comfortable, aesthetically pleasing, practical attachment for any Airsoft rifle, carbine or submachine gun with 20mm RIS rails.

£9.99
  • MBUS Style
  • Flip Up / Down
  • Adjustable Sights

Simple to install and adjust as well as being lightweight. These are budget replica sights but adjust in every way that is necessary. 

£9.99
  • Spring Core Centre
  • Durable Alloy Body
  • Foam Filled Suppressor

This Airsoft suppressor is designed to be fit onto 14mm Counter Clockwise (CCW) threads, and is foam filled to reduce the audible output of the weapon. The suppressor is constructed from Alloy, and features a spring core and foam filling, and is finished with US Navy Seal Branding. 

About ACM Airsoft

ACM offer a versatile range of Airsoft attachments and accessories to cover every players’ needs. Whether it's a foregrip, stock, sight or scope you can guarantee that there is an ACM Airsoft option

The volume of products that ACM Airsoft produces, means they can offer their accessories at a jaw-dropping price without compromising on construction quality. If you want to be the most operative player on the field, with a low-cost, high-quality customised kit then shop ACM Airsoft accessories today. 

Patrol Base offers only the highest quality brands to supply all Airsoft players with combat-ready guns and accessories. Browse our full range of Airsoft brands today including BoltPTS Syndicate and more.