ARES Airsoft

Lee Enfield fans, here is another one to add to the collection! The Ares Lee Enfield Rifle No.4 MK.I* is constructed entirely from metal and real wood, just like the real thing, and has a phenomenal amount of attention to detail paid in its construction. This Lee Enfield is a near-perfect replica of the simplified mid-war No.4 variant, the Rifle No.4 MK.I* which was supplied en mass to British, Canadian and other allied troops through the latter years of WWII. 

Most of the metal parts are stainless steel, granting strength and realistic weight and heft, and the wood finish on the stock is gorgeous, looking slightly nicer than a real No.4 MK.I* with its deep woodgrain and consistent finish. Whether you want a Lee Enfield for WWII reenactment, skirmishing, or you simply want a wall hanger as a centrepiece for your man cave, the Ares Lee Enfield Rifle No.4 MK.I* is a must have for Lee Enfield fans!

If you're eyeing up one of the dazzling new Ares DMR rifles from the AR-308 range, or you own the Secutor Rapax DMR rifle, spare magazines are always handy! This box set includes 5x mid-cap magazines, each of which holds 130 BBs and can be loaded using a standard Airsoft speed loader through the fill/feed port at the top of the magazine body. These magazines are constructed from high density polymer with a rough textured finish, and the exterior design is patterned after a popular style of .308LR magazine, with reinforcing ribs on the exterior which also provide superb grip when handling the mag during a reload, and a "dot matrix" on either side so you can number your magazines for admin purposes.

A Rifle length 6mm Airsoft Gun, based on the widely used M4 with the suppressor on this airsoft weapon is sunk into the rail system to give it a unique look.

A new line of M-LOK mounting hardware from ARES! Whatever it is you want on your M-LOK handguard, ARES can help you mount it properly! No adaptor for the kitchen sink yet though, we are waiting ARES...

We have all been drooling over the real KelTec RDB for years. The RDB is one of the most advanced bullpup rifles in existence and eliminates the hand full of downsides to bullpups that have people wandering around carrying rifles that are too long. It feels like a part of your body when you hold it, with extreme pointability due to the center of balance being around the middle of the receiver. With a steel receiver, high-density polymer parts, and a comfortable rubber buttplate, this AEG is nearly indistinguishable from the real thing, as we have come to expect from ARES. 

We have all been drooling over the real KelTec RDB for years. The RDB is one of the most advanced bullpup rifles in existence and eliminates the hand full of downsides to bullpups that have people wandering around carrying rifles that are too long. It feels like a part of your body when you hold it, with extreme pointability due to the center of balance being around the middle of the receiver. With a steel receiver, high-density polymer parts, and a comfortable rubber buttplate, this AEG is nearly indistinguishable from the real thing, as we have come to expect from ARES. 

If you're sick and tired of seeing the usual M4 and AK variants, the Ares Otto Repa SOC SLR Assault Rifle AEG (AR SOC) should excite you! This interesting and unique bullpup design is based on a real steel prototype designed in Germany by Otto Repa, known as the SOC SLR. This variant is the AR-SOC, the assault rifle variant and is the ideal primary to pair with a sci-fi-style loadout which requires a plausibly realistic platform which doesn't look like any rifle issued in the current day.

Inside, we have a unique gearbox shell with wide parts compatibility with version 2 gearbox internals. The Ares EFCS MOSFET is also present inside, allowing for the AR-SOC's super satisfying 2-round burst mode and super snappy trigger response. The EFCS also provides programmable fire modes through the Ares EFCS Programming Box (available separately) and also provides cycle control, meaning you'll never get a trigger lockup with the AR-SOC no matter how fast you pump out those semi-auto shots.

We think the AR-SOC would be a fantastic stand-in for the Helldivers 2 Liberator assault rifle but also looks straight out of Halo! If your next move is to build a mould-breaking sci-fi loadout, the Ares Otto Repa SOC SLR Assault Rifle AEG (AR SOC) is the perfect primary!

If you need some additional magazines for your Ares Otto Repa SOC SLR Sniper Rifle, look no further! The Ares 40rnd Low-Cap Magazine for SOC Sniper Rifle AEG is designed specifically for this platform, it is constructed from high-density polymer and holds 40 BBs. This might seem like a low capacity but the SOC AEG is a sniper/DMR-type platform and 40rnds will be all you need to get the job done.

The magazine inserts via the "rock and lock" method, requiring that you index the front of the magazine into the well first and rotate the rear up to lock. It features ridged grooves on the sides to aid in gripping, with or without gloves. The magazine is loaded at the top of the mag using a speed loader, its low-cap design means there is no battle rattle when hiding in the bushes!

If you're in search of an M4/AR-15 AEG and seek a more realistic feel and weight, the Ares X-Class Model 6 AR-090E M4/AR-15 AEG is what you need. This full metal M4 platform is a unique Ares design inspired by the most modern AR platforms in the real steel world, boasting a uniquely design receiver with waffle gripping texture, an M-LOK handguard and compact PDW sliding stock. One of the coolest aspects of the externals is the Ares slim pistol grip, designed to mimic the dimensions of real AR grips for a GBBR-like realistic feel!

Inside, we are equipped with a version 2 gearbox with 18:1 steel gears, a quick change spring system and the Ares EFCS MOSFET, providing programmable fire controls using an Ares EFCS programming box (not included) and low voltage cutoff to protect your battery. The EFCS also improves electrical efficiency and pairs perfectly with the pre-installed slim high torque motor to provide a snappy trigger response in semi, ideal for pumping out suppressive fire in CQB. If you want a solidly built, realistic AR that isn't a GBBR, the Ares X-Class Model 6 AR-090E M4/AR-15 AEG is a fantastic choice!

Keep the weight of your bipod-equipped rifle down with this featherweight M-LOK mount from ARES. This mount enables you to add Atlas-style bipods to your M-LOK front end. The Atlas style of bipod mounts using a large cylindrical lug and is often seen on L96s and variants in British army service. 

A drop-in fit OEM manufactured replacement handguard, compatible with the Amoeba range of M4s, from AM002 through to AM006.

A spare magazine for VZ.58 AEGs, externally, this magazine is a close replica of the real steel 30-round 7.62x39mm magazine for the real steel VZ.58. While externally the VZ.58 may closely resemble the AK-47, the real steel variant shares no parts with Kalashnikov Rifles, including the magazines. This magazine has a steel shell housing and polymer internals, it is strong and has extremely reliable feeding. Much like its real steel counterpart, this magazine features the classic ribbed texture adding to the realistic aesthetic and making it easier to handle and manipulate.

As this is a medium capacity (mid-cap) design, it is filled using a speed loader directly into the feed lips, meaning it has great capacity and without any rattle during movement. The ammunition is loaded directly into the Airsoft gun from the magazine's feeding tube using its steel spring, so there is no winding mechanism present on the magazine.

This is the perfect spare magazine for Airsoft VZ.58 replicas if you need more ammo to get the operation done.

If you skirmish in a suit with a silverballer, you need this rifle! The Ares MSR-WR Takedown Sniper Rifle Kit with Hard Case is one of the coolest Airsoft guns we've seen in some time; a unique takedown-style bolt action sniper rifle which can be disassembled in minutes to be stored in its own unique hard case.

The set also includes a mini bipod with extendable legs which mounts to the pre-installed bipod spigot on the front of the chassis, giving you everything you need to get sniping other than your choice of optic, though Ares left space inside the hard case for an optic or suppressor, depending on your needs.

Internally, the MSR-WR is compatible with upgrade parts for the Ares TX sniper rifle system, broadly based on the VSR-10 design, though we are currently unable to confirm VSR compatibility. The HOP-up unit is a TDC type using a grub screw to adjust, promising an improved ability to hold its setting and less side-to-side deviation than a standard VSR slider HOP-up. Out of the box, the MSR-WR hits out at a tasty 420 FPS using 0.2g BBs and its short and easy bolt pull makes it fantastic for rapid follow-up shots. If you're a fan of takedown rifles or want an assassin-style primary for your Agent 47 loadout, the Ares MSR-WR Takedown Sniper Rifle Kit with Hard Case will suit you perfectly!

Looking for the base gun for your Airsoft DMR build? The Ares AR-308 series is uniquely equipped for this role, being patterned after real steel AR-10 battle rifles, the M4/AR15's big brother. The AR-308 series are built to dominate, being kitted out with a high torque motor, quick change spring system, the Ares EFCS trigger unit, and a rotary HOP-up unit with the opportunity to lock the AEG to semi, either using an Ares programmer unit or mechanically by installing a replacement selector lever if you want to build the inside of the AR-308 to suit the DMR styling of the externals.

The AR-308M is the mid-length offering in the AR-308 line and makes use of a 12.5-inch outer barrel with a 12-inch M-LOK handguard, and the unique Ares Pro stock, offering 5 positions of adjustment. This AEG's external build quality is exceptional, with razor-sharp machining throughout and a beautiful matt metallic bronze finish applied. We aren't sure what is more impressive; the high-quality feel of this AEG or its exceptional trigger response and rate of fire, which our fingers cannot outrun on a 7.4V LiPo!

The Ares AMAG 100rnd Mid-Cap Magazine is a must-have magazine for any airsoft enthusiast. It is designed for M4 and AR-15 style rifles and is perfect for players who prefer a more realistic appearance on the field. It is constructed from a high-quality polymer, making it both lightweight and durable, this allows for easy manoeuvrability when reloading. The sturdy polymer construction is sure to withstand all the tribulations of an intense skirmish!

Featuring a mid-cap design, this magazine can hold up to 100 BBs, providing you with the necessary firepower, minus the need for constant reloading. It's an ideal choice for players who want to strike a balance between a functional capacity and a realistic-looking magazine. Wherever you're skirmishing, this magazine ensures you'll never run out of ammunition when it matters most.

The Ares AMAG 100rnd Mid-Cap Magazine is a must-have magazine for any airsoft enthusiast. It is designed for M4 and AR-15 style rifles and is perfect for players who prefer a more realistic appearance on the field. It is constructed from a high-quality polymer, making it both lightweight and durable, this allows for easy manoeuvrability when reloading. The sturdy polymer construction is sure to withstand all the tribulations of an intense skirmish!

Featuring a mid-cap design, this magazine can hold up to 100 BBs, providing you with the necessary firepower, minus the need for constant reloading. It's an ideal choice for players who want to strike a balance between a functional capacity and a realistic-looking magazine. Wherever you're skirmishing, this magazine ensures you'll never run out of ammunition when it matters most.

If you're eyeing up one of the dazzling new Ares DMR rifles from the AR-308 range, or you own the Secutor Rapax DMR rifle, spare magazines are always handy! This box set includes 5x mid-cap magazines, each of which holds 130 BBs and can be loaded using a standard Airsoft speed loader through the fill/feed port at the top of the magazine body. These magazines are constructed from high density polymer with a rough textured finish, and the exterior design is patterned after a popular style of .308LR magazine, with reinforcing ribs on the exterior which also provide superb grip when handling the mag during a reload, and a "dot matrix" on either side so you can number your magazines for admin purposes.

If you're seeking spare mags for your Ares AR-308 or Secutor Rapax AEG, this is what you need. The Ares 130rnd Mid-Cap Magazine for AR-308/Rapax AEGs is constructed from high-density polymer with a steel feed spring, patterned after the real steel Polymer-Mag LR, complete with realistic calibre markings. 

Compatibility-wise, this magazine will work with both the Ares AR-308 AEG platform and the Secutor Rapax AEG series but won't work with other brands of SR-25/AR-10. Like other Airsoft mid-cap, the AR-308/Rapax magazine is loaded through the fill/feed port using a speed loader or loading tool and doesn't rattle, making it the ideal DMR magazine. 

If you're seeking spare mags for your Ares AR-308 or Secutor Rapax AEG, this is what you need. The Ares 130rnd Mid-Cap Magazine for AR-308/Rapax AEGs is constructed from high-density polymer with a steel feed spring, patterned after the real steel Polymer-Mag LR, complete with realistic calibre markings. 

Compatibility-wise, this magazine will work with both the Ares AR-308 AEG platform and the Secutor Rapax AEG series but won't work with other brands of SR-25/AR-10. Like other Airsoft mid-cap, the AR-308/Rapax magazine is loaded through the fill/feed port using a speed loader or loading tool and doesn't rattle, making it the ideal DMR magazine. 

If you like a sneaky-beaky setup, the Ares Amoeba AM-013 Honey Badger M4/AR-15 AEG should suit your style perfectly. This M4/AR-15 AEG is an integrally suppressed design, meaning it has a suppressor pre-installed beneath the handguard, reducing the overall length and keeping the platform CQB-friendly. A unique design inspired by the real steel Q Honey Badger, the Amoeba AM-13 is about as unique as AR platforms get and makes a fantastic primary for a futuristic or ultra-modern loadout. 

Inside, we have a version 2 gearbox with an alloy shell and 18:1 steel gears and the EFCS MOSFET/ETU system which offers programmable fire modes via the Ares EFCS programming box(not included). The EFCS works using magnets to detect the cycle of the spur gear, ensuring your gearbox completes a full cycle each time the trigger is pressed. If you need a new AR platform with stealthy styling, the Ares Amoeba AM-013 Honey Badger M4/AR-15 AEG; Full Length is exactly that!

If you like a sneaky-beaky setup, the Ares Amoeba AM-013 Honey Badger M4/AR-15 AEG should suit your style perfectly. This M4/AR-15 AEG is an integrally suppressed design, meaning it has a suppressor pre-installed beneath the handguard, reducing the overall length and keeping the platform CQB-friendly. A unique design inspired by the real steel Q Honey Badger, the Amoeba AM-13 is about as unique as AR platforms get and makes a fantastic primary for a futuristic or ultra-modern loadout. 

Inside, we have a version 2 gearbox with an alloy shell and 18:1 steel gears and the EFCS MOSFET/ETU system which offers programmable fire modes via the Ares EFCS programming box(not included). The EFCS works using magnets to detect the cycle of the spur gear, ensuring your gearbox completes a full cycle each time the trigger is pressed. If you need a new AR platform with stealthy styling, the Ares Amoeba AM-013 Honey Badger M4/AR-15 AEG; Full Length is exactly that!

A Rifle length 6mm Airsoft Gun, based on the widely used M4 with the suppressor on this airsoft weapon is sunk into the rail system to give it a unique look.

We have all been drooling over the real KelTec RDB for years. The RDB is one of the most advanced bullpup rifles in existence and eliminates the hand full of downsides to bullpups that have people wandering around carrying rifles that are too long. It feels like a part of your body when you hold it, with extreme pointability due to the center of balance being around the middle of the receiver. With a steel receiver, high-density polymer parts, and a comfortable rubber buttplate, this AEG is nearly indistinguishable from the real thing, as we have come to expect from ARES. 

Looking for the base gun for your Airsoft DMR build? The Ares AR-308 series are uniquely equipped for this role, being patterned after real steel AR-10 battle rifles, the M4/AR15's big brother. The AR-308 series are built to dominate, being kitted out with a high torque motor, quick change spring system, the Ares EFCS trigger unit and a rotary HOP-up unit with the opportunity to lock the AEG to semi, either using an Ares programmer unit or mechanically by installing a replacement selector lever if you want to build the inside of the AR-308 to suit the DMR styling of the externals.

The AR-308S is the shortest in the AR-308 line and makes use of a compact 9.5-inch outer barrel with a 9-inch M-LOK handguard, and the unique Ares Pro stock pistol stabilising brace, offering 4 positions of adjustment. The external build quality of this AEG is absolutely exceptional, with razor-sharp machining throughout and a beautiful matt metallic bronze finish applied. We aren't sure what is more impressive; the high-quality feel of this AEG or its exceptional trigger response and rate of fire, which our fingers cannot outrun on a 7.4V LiPo!

Looking for the base gun for your Airsoft DMR build? The Ares AR-308 series are uniquely equipped for this role, being patterned after real steel AR-10 battle rifles, the M4/AR15's big brother. The AR-308 series are built to dominate, being kitted out with a high torque motor, quick change spring system, the Ares EFCS trigger unit and a rotary HOP-up unit with the opportunity to lock the AEG to semi, either using an Ares programmer unit or mechanically by installing a replacement selector lever if you want to build the inside of the AR-308 to suit the DMR styling of the externals.

The AR-308M is the mid-length offering in the AR-308 line and makes use of a 12.5-inch outer barrel with a 12-inch M-LOK handguard, and the unique Ares Pro stock, offering 5 positions of adjustment. The external build quality of this AEG is absolutely exceptional, with razor-sharp machining throughout and a beautiful matt metallic bronze finish applied. We aren't sure what is more impressive; the high-quality feel of this AEG or its exceptional trigger response and rate of fire, which our fingers cannot outrun on a 7.4V LiPo!

Based on a prototype Begadi design, this futuristic and sci-fi-looking gun is an Airsoft electric DMR rifle and ready to rock straight out of the box! The Ares Otto Repa SOC SLR Sniper Rifle (MSR-SOC)  features a fully adjustable bipod and cheek rest, an inbuilt monopod and even an inbuilt and fully functional red dot laser!

Combine this with a full metal external construction with majority CNC 6063 Aluminium and alloy parts, and you get a realistic Airsoft replica that almost breaks the scales at 6.1 kg! Naturally, this means the MSR-SOC is not for the slouches, but more for those who value the realistic marksman experience and role, taking time to choose your position and prioritising concealment over mobility. 

Internally, the MSR-SOC is a pure-bred DMR, with a unique gearbox shell boasting plenty of compatibility with common version 2 gearbox parts for the upgrade fiends. As it comes, the MSR-SOC has an enormously long 670mm inner barrel and hits out at approximately 430 FPS straight out of the box, with a super snappy trigger response thanks to the pre-installed EFCS MOSFET and plenty of strength thanks to the piston's full steel tooth rack. If you want to take a walk on the wild side and run a DMR rifle nobody else has, the Ares Otto Repa SOC SLR Sniper Rifle (MSR-SOC) is what you need!

A replacement Grip and Cheek Pad Replacement set which allows you to replace the stock parts with upgraded parts. 

Looking for one of the best looking DMR short dot scopes around? The Ares 1-6x24 Illuminated Scope has a real premium look and comes with a plethora of accessories which would normally be your job to source and fit. Included in the superb quality hard carry case the scope is supplied in we have a dual scope ring mount, styled after the real steel "G" scope mount, a kill flash device which is fitted over your front lens to stop glare from giving your position away, a throw lever ring which can be attached to the magnification adjuster for fast adjustments, and a pair of flip-up lens covers to keep your lenses clean and dust-free when the scope is stored. The only thing left to buy is the gun to mount it on!

Calling all British Army loadouts!! This is the absolute greatest L85 platform Airsoft Replica the market has seen yet, but we didn't need to tell you that. Featuring Stamped Steel and CNC Aluminium construction, a realistic Electronic Blowback, a Microswitch Trigger, Functional Bolt Lock System, Electronic Fire Control System and SO much more, this is the ultimate Airsoft Replica of a British Army standard. As an added bonus, it comes supplied in a gorgeous Hard Case that has been purpose-formed for the Rifle.

Looking for the base gun for your Airsoft DMR build? The Ares AR-308 series are uniquely equipped for this role, being patterned after real steel AR-10 battle rifles, the M4/AR15's big brother. The AR-308 series are built to dominate, being kitted out with a high torque motor, quick change spring system, the Ares EFCS trigger unit and a rotary HOP-up unit with the opportunity to lock the AEG to semi, either using an Ares programmer unit or mechanically by installing a replacement selector lever if you want to build the inside of the AR-308 to suit the DMR styling of the externals.

The AR-308L Deluxe Version is the full-length member of the Ares AR-308 family and comes ready for DMR duty straight out of the box including the superb Ares 1-6x24 Illuminated scope, a dual ring scope mount, the Ares QD suppressor and two mid-cap magazines, all served to you in an excellent quality hard rifle case. The AR-308L has been electronically locked to semi-automatic and shoots at 365 FPS average straight out of the box, meaning all you need is your battery and ammo and you are ready to go in the DMR role! The external build quality of this AEG is absolutely exceptional, with razor-sharp machining throughout and a beautiful matt metallic bronze finish applied. We aren't sure what's better, the external quality or the ferocious performance of this big boy AR!