Refine results
Refine by
Viewing 30 of 51.
grid
list
£4.99
  • 100rnd Capacity
  • Essential for loading mid-caps
  • Pistol mag shaped - Fits in pistol mag pouches

If you have mid-caps to load, you'll need one of these! The Delta Armory 100rnd Magazine Speed Loader is a thumb plunger type speed loader constructed from translucent polymer which holds 100 BBs approximately. The loader is filled via its fill window at the top and the thumb plunger can be deployed and stowed via the button on the side. 

To load an Airsoft mid-cap or low-cap, simply fill your speed loader, align the fill/feed port of the magazine with the aperture on the bottom of the loader, hold the mag and loader together and push the thumb plunger repeatedly until it becomes firm. Your mag is now filled. If you run mid-caps, low-caps or you like to use multiple weights of BB, speed loaders are essential Airsoft kit!

£7.99
  • 5000rnd Resealable bag
  • High-grade polished BBs
  • 0.2g - Ideal for CQB, sidearms & shotguns

If you need BBs for CQB or use in your sidearm or shotgun, 0.20g is the ideal weight for you! The Delta Armory 0.20g Diamond 6mm BBs are supplied in a resealable bag of 5000 and are high-grade polished BBs to ensure reliable feeding and maximum accuracy potential. 

£11.99
  • 5000rnd Resealable bag
  • High-grade polished BBs - Biodegradable
  • Ideal for Pistols and shotguns used outside

If you need biodegradable BBs for your pistol or shotgun, the 0.20g Diamond 6mm BIO BB from Delta Armory is a fantastic choice. Supplied in a resealable bag of 5000, Delta's Diamond BBs are high-grade polished 6mm BBs with tight tolerances to ensure reliable feeding and maximum accuracy potential.

£13.99
  • Palm protection - 3 Foam palm pads
  • Various sizes & colours available
  • Finger joint protection - Avoid BB impact pain!

If you want to avoid the pain of crawling on thorns or taking those stinging knuckle shots, these Combat Gloves from Delta Armory will do the trick! The gloves are available in a range of different colour options suitable for any loadout or environment, with olive drab, black, green or tan up for grabs.

Delta's gloves are characterized by good protection of the parts of the hand where impact is most frequent - palm, finger joints and knuckles. With foam pad on the thumb, index, middle and ring fingers, you can crawl all day in comfort in these affordable tactical gloves and never feel nettles or thorns!

£13.99
  • Palm protection - 3 Foam palm pads
  • Various sizes & colours available
  • Finger joint protection - Avoid BB impact pain!

If you want to avoid the pain of crawling on thorns or taking those stinging knuckle shots, these Combat Gloves from Delta Armory will do the trick! The gloves are available in a range of different colour options suitable for any loadout or environment, with olive drab, black, green or tan up for grabs.

Delta's gloves are characterized by good protection of the parts of the hand where impact is most frequent - palm, finger joints and knuckles. With foam pad on the thumb, index, middle and ring fingers, you can crawl all day in comfort in these affordable tactical gloves and never feel nettles or thorns!

£13.99
  • Palm protection - 3 Foam palm pads
  • Various sizes & colours available
  • Finger joint protection - Avoid BB impact pain!

If you want to avoid the pain of crawling on thorns or taking those stinging knuckle shots, these Combat Gloves from Delta Armory will do the trick! The gloves are available in a range of different colour options suitable for any loadout or environment, with olive drab, black, green or tan up for grabs.

Delta's gloves are characterized by good protection of the parts of the hand where impact is most frequent - palm, finger joints and knuckles. With foam pad on the thumb, index, middle and ring fingers, you can crawl all day in comfort in these affordable tactical gloves and never feel nettles or thorns!

£13.99
  • Palm protection - 3 Foam palm pads
  • Various sizes & colours available
  • Finger joint protection - Avoid BB impact pain!

If you want to avoid the pain of crawling on thorns or taking those stinging knuckle shots, these Combat Gloves from Delta Armory will do the trick! The gloves are available in a range of different colour options suitable for any loadout or environment, with olive drab, black, green or tan up for grabs.

Delta's gloves are characterized by good protection of the parts of the hand where impact is most frequent - palm, finger joints and knuckles. With foam pad on the thumb, index, middle and ring fingers, you can crawl all day in comfort in these affordable tactical gloves and never feel nettles or thorns!

£16.99
  • 4000rnd Resealable bag
  • High-grade polished BBs - Tracer version
  • Ideal for tracer users indoors or outdoors

If you're looking for high-grade tracer BBs, the Delta Armory 0.25g Diamond 6mm Tracer BBs are the right tool for the job. Supplied in a resealable bag of 4000, Delta's Diamond BBs are high-grade polished 6mm BBs with tight tolerances to ensure reliable feeding and maximum accuracy potential. These are the tracer versions and will glow brightly when shot through an Airsoft gun with a tracer unit, adding an instinct aiming and psychological warfare advantage, especially up close!

£19.99
  • 1KG Resealable bag
  • High-grade polished BIO tracer BBs
  • 0.28g - Ideal for tracer users in outdoor skirmishes 

If you have a night game in the great outdoors or you run 0.28g BBs in a tracer-equipped platform in CQB, Delta Armory 0.28g Diamond 6mm BIO Tracer BBs should be on your shopping list! These BBs are supplied in a 1KG resealable bag of 3571 BBs approximately and are high-grade polished BBs to ensure reliable feeding and maximum accuracy potential. 

When shot through a tracer unit, these BBs will illuminate in bright green so you can see where your shots land and adjust accordingly. Being made from biodegradable materials means these BBs are suitable for outdoor skirmishing at any site in the country and great for target shooting in the back garden. 

£29.99
  • 500 Lumens output
  • Includes pressure switch & push button tail caps
  • Supplied with a 20mm Picatinny mount

If you play a lot of CQB, a tactical flashlight will be an asset to your setup. The Delta Armory Defender Shield Tactical Flashlight is a highly flexible unit capable of being used as a handheld light or weapon light, packaged with a pressure switch tail cap and equipped with a push button tail cap as it comes. Also included is a 20mm Picatinny ring mount to allow you to mount it to your primary and a lanyard so you can carry it as a handheld light and avoid dropping it in wet weather.

The Defender Shield is powered by the included rechargeable18650 Lithium battery but the charger is not included. Compatible chargers can be found by putting "18650 Battery Charger" into your favourite search engine. If you're kitting out your primary for CQB or night skirmishes you need this on your primary!

From £169.99
  • 6.03mm Tightbore inner barrel
  • High density polymer with aluminium handguard
  • M-LOK/20mm Picatinny hybrid handguard

If you have your sights set on an M4/AR-15 AEG with plenty of accessory options in the perfect length for both indoor and outdoor skirmishes, the DA-B11 BRAVO™ from Delta Armory is a solid choice. BRAVO™ AEGs are constructed with strong high-density polymer receivers and aluminium handguards, making them perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game. 

Externally, the DA-B11 boasts a great combination of 20mm Picatinny rails and M-LOK negative space attachment slots, giving you access to prolific 20mm Picatinny attachments as well as the latest bits for M-LOK systems. The barrel is 14.5 inches long, giving you a great mid-length platform ideal for a mix of CQB and outdoor scenarios. At the rear, we are treated to the superb Delta Armory battery stock, a comfortable and well-designed stock with built-in sling points and a decent-sized battery compartment ideal for LiPo batteries. 

Inside the DA-B11, we are treated to some thoughtful internal upgrades to extend the platform's lifespan and enhance performance. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up unit, the steel 18:1 gearset runs on 7mm ball-bearing bushings and SHS provides the piston and tappet plate, a brand known for hard-wearing upgrade parts. Whether this will be your first AEG or a backup to a heavier full metal primary, you can't go wrong with the Delta Armory DA-B11!

From £194.99 Pack price
Normally £210.93
Save £15.94
  • M4A1 CQBR style AEG
  • 2 extra mags & speed loader
  • LiPo battery, LiPo charger & charging bag

If you have a taste for the classic Military configurations but move fast or primarily play CQB, this bundle should suit you perfectly! The CHARLIE™ M4 CQBR Bundle pairs the DA-C02 CHARLIE™ CQBR with 2 extra spare magazines, a speed loader, a LiPo battery, a LiPo balance charger and a battery charging bag. All you need now is your choice of eye/face protection and some BBs to shoot! We recommend 0.25g BBs for a good balance between affordability and performance. 

From £194.99 Pack price
Normally £210.93
Save £15.94
  • US Army style M4A1
  • 2 extra mags & speed loader
  • LiPo battery, LiPo charger & charging bag

If you like the M4A1 in its classic US Army configuration, this bundle was made with you in mind! The Delta Armory CHARLIE™ M4 Carbine Bundle pairs the DA-C03 M4A1 AEG with 2 extra spare magazines, a speed loader, a LiPo battery, LiPo balance charger and a battery charging bag. All you need to get busy with this carbine is your eye protection and your choice of BBs. We recommend 0.25g BBs for a good balance between affordability and performance! 

From £439.99
  • Full metal construction - Mostly CNC 6063 Alu
  • Licenced by PROARMS®  - Detailed trademarks
  • Delta Armory Programmable ETU pre-installed

If you have the itch for a new AR but you want something rare, the Delta Armory PROARMS® PAR MK3 AEG is exactly that. Based on the real steel PROARMS® PAR MK3, this full-metal AEG is constructed with a CNC 6063 aluminium receiver and handguard and is equipped internally with the same fantastic pre-upgraded parts as the Delta Armory ALPHA ETU series. 

This means we are treated to a 6.03mm tightbore inner barrel, rotary HOP-up unit, SHS piston and tappet plate, a high torque motor and the Delta Armory programmable ETU, allowing for burst mode, binary trigger and precocking to be programmed in using the fire controls of the AEG itself. If you're looking for a lesser-seen design with AR compatibility, pre-upgraded internals and build quality that is a cut above the usual full metal M4, the Delta Armory PROARMS® PAR MK3 10" is one to watch!

From £449.99
  • Full metal construction - Mostly CNC 6063 alu
  • Licenced by PROARMS® - Detailed trademarks
  • ETU, high torque motor & 6.03mm tightbore barrel

If you're looking at high-end AR options and you want something rare, the Delta Armory PROARMS® PAR MK3 14.5" M4/AR-15 AEG is worthy of your scrutiny! This cutting-edge modern AR design boasts more than its fair share of perks when compared to other M4/AR-15 platforms, most notably its CNC aluminium receiver and handguard, mimicking the real PAR with its angled receiver surfaces and super-modern look perfectly. If you can call any AR-15-derived rifle unique, it's this one!

On the inside, we are treated to Delta Armory ALPHA ETU internals, featuring SHS reinforced parts, a CNC steel spring guide and cylinder, a CNC aluminium piston head and cylinder head and a mighty high torque Neodymium magnet motor, backed up by the advanced Delta Armory ETU/MOSFET. If a rarely-seen AR with top-notch performance is what you need to expand your arsenal, the Delta Armory PAR MK3 is the right call!

From £449.99
  • Full metal construction - Mostly CNC 6063 Alu
  • Licenced by PROARMS® - Detailed trademarks
  • Delta ETU, tightbore barrel & high torque motor

If you appreciate a well-built, unique AR platform bristling with pre-upgraded parts, the Delta Armory DA-PAR-12 PROARMS® PAR MK3 12" fits the bill. This uniquely styled AR platform is built like a tank, boasting a CNC 6063 aluminium handguard and receiver with immaculate licenced PROARMS trademarks and the uniquely modern PROARMS receiver design. 

The fun doesn't end on the outside, either. Internally, we are treated to the top of the line when it comes to Delta Armory internals, including a high torque motor, 6.03mm tightbore inner barrel, SHS piston and tappet plate combo and CNC aluminium cylinder group parts. 

The cream of the crop is the Delta Armory ETU/MOSFET system which offers programmable fire controls including burst mode, binary trigger and adjustable pre-cocking along with protecting from power surges and warning you when your battery's voltage drops too low. For an advanced exterior and equally advanced internals, the Delta Armory PROARMS® PAR MK3 12" is what you need!

From £459.99
  • Full metal construction - Mostly CNC 6063 Alu
  • Licenced by PROARMS® - Detailed trademarks
  • ETU, Tightbore, MOSFET & 16-inch barrel - DMR build?

If you're looking for a rock-solid DMR base gun with real-world foundations and pre-upgraded internals, check out the Delta Armory PROARMS® PAR MK3 16". This full metal M4/AR-15 AEG platform is based on the real PROARMS PAR MK3, a cutting-edge AR-15 platform which simply cannot be built from Airsoft aftermarket parts. 

Like the real thing, the majority of the Delta PAR externals are constructed from CNC 6063 aluminium, sidestepping the usual Airsoft alloy for a stronger, more long-lasting external build. As we might expect, the machining quality is absolutely flawless, as are the authentic licenced PROARMS trademarks precisely engraved on each side of the modernised receiver. 

At the heart of the PAR MK3, we are treated to Delta Armory ALPHA ETU series internals, meaning reinforced SHS parts sit side by side with a CNC aluminium piston head and cylinder head and a CNC steel spring guide and cylinder, powered by a high torque Neodymium magnet motor and kept in check by the Delta Armory programmable ETU/MOSFET system. Whether you build it out into a high FPS DMR or keep it stock, the Delta Armory PROARMS® PAR MK3 16" will be an asset to any long-range objective!

£4.99
  • High density polymer construction
  • Fits Delta Armory & Krytac battery stocks
  • Replace your lost butt plate!

If you've lost the butt plate from your Delta Armory or Krytac battery stock, this is your lucky day! This Butt Plate is a replacement original part from Delta Armory, compatible with both the Delta Armory and Krytac Battery stocks. The butt plate has texture and a Delta Armory logo on its contact surface, along with textured tabs on each side which lock it into the stock itself and allow easy access to the battery compartment.

£4.99
  • High density polymer & rubber
  • Replacement for most Crane stocks
  • Replace your missing butt plate

If you've misplaced your Crane stock's butt plate, here you go! The Delta Armory Butt Plate for Crane M4/AR-15 Battery Stock is a replacement original part and should fit the vast majority of Airsoft Crane stocks, particularly those from Delta Armory, Specna Arms and Lancer Tactical. The butt plate is constructed in two parts; with the base being high density polymer and the outer coating being grippy rubber with lattice texture on its surface.

As mentioned, this should fit almost any Airsoft Crane stock out there but we haven't tested them all, so proceed with caution and remember we cannot accept returns on any butt plate that has been modified.

£7.99
  • 130rnd Capacity
  • Mid-cap magazine - No battle rattle
  • Compatible with most M4/AR-15 AEGs

If you need affordable Mid-cap magazines in tactical tan for your M4/AR-15 AEG you're going to want to check this out! The Delta Armory 130rnd STANAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after the STANAG magazine, a standard issue magazine for M4, L85/SA80, SCAR-L, HK416 rifles used in NATO militaries, amongst many others. 

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

£9.99
  • Alloy construction
  • Provides 6 positions of adjustment
  • Compatible with M4/AR-15 AEGs

If you're putting together an M4/AR-15 AEG from scratch or you want to add a sliding stock to your fixed stock rifle, this buffer tube should help! The Buffer Tube for M4/AR-15 AEG from Delta Armory is constructed from alloy and compatible with most M4/AR-15 AEGs on the market. The tube provides 6 positions of adjustment for whichever M4/AR-15 AEG sliding stock you choose to mount, allowing you to collapse the stock for storage or close-range engagements. 

The set includes the buffer tube itself, the castle nut (non-functional) and the bolt required to mount the buffer tube. This is a standard TM clone buffer tube design and should fit most M4/AR-15 AEGs without issue, though as with any external mod, there may be slight fitting which needs to be carried out. 

£34.99
  • Complete V2 Gearbox
  • Fits most M4/AR-15 AEGs
  • SHS Piston & reinforced tappet plate

If your M4 needs a revamp, a new gearbox is the easiest way to do it. The Delta Armory Complete Version 2 Gearbox for M4/AR-15 AEG is compatible with almost every M4/AR-15 AEG on the market and is well-equipped with reinforced parts straight out of the gate. 

This is the same gearbox used in the Delta Armory CHARLIE™ line AEGs, boasting a quick change spring guide, 18:1 steel gears running on 7mm bushings, an SHS piston with a full steel tooth rack, an SHS reinforced tappet plate and a reinforced gearbox shell with radiused cylinder window corners. 

The pre-installed spring will provide around 380 FPS when installed, so if you plan to use this gearbox for anything other than a semi-auto-locked DMR build you will need an M100, M105 or weaker spring to keep it within site limits. Thankfully, the quick change spring system makes spring swaps a breeze! Whether you are breathing new life into an old M4 AEG or you are building an AEG from scratch, this complete gearbox will save you loads of time and messing around!

£39.99
  • MOLLE equipped
  • Adjustable shoulders & cummerbund
  • JPC replica - Look the part on the cheap!

If you want to look like a real baller at your next skirmish but your budget is limited, fear not! The Delta Armory Jump Plate Carrier MOLLE Tactical Vest is a super affordable JPC replica, allowing you to get the look of the SAS, Navy SEALs or Delta Force for less than the price of a takeaway. Constructed from Nylon with bungee cord mag pouch retainers and cummerbund adjustment, the Jump Plate Carrier is a low-profile plate carrier designed with parachute jumping in mind. 

While it may be low-profile, the JPC has plenty of MOLLE attachment loops and all sides, allowing you to kit it out with MOLLE pouches if you need more load-bearing capacity or run it slick with the 3 built-in M4/AR-15 magazine pouches and move fast with the added protection of the pre-installed foam mock SAPI plates. The vest is fully adjustable, with velcro adjustments on each shoulder to customise the ride height and bungee cord at the rear to allow for practically any body type. 

Available in a wide range of colour options suitable for any style, this JPC is what you need if you like your Airsoft kit cheap and cheerful! 

£39.99
  • MOLLE equipped
  • Adjustable shoulders & cummerbund
  • JPC replica - Look the part on the cheap!

If you want to look like a real baller at your next skirmish but your budget is limited, fear not! The Delta Armory Jump Plate Carrier MOLLE Tactical Vest is a super affordable JPC replica, allowing you to get the look of the SAS, Navy SEALs or Delta Force for less than the price of a takeaway. Constructed from Nylon with bungee cord mag pouch retainers and cummerbund adjustment, the Jump Plate Carrier is a low-profile plate carrier designed with parachute jumping in mind. 

While it may be low-profile, the JPC has plenty of MOLLE attachment loops and all sides, allowing you to kit it out with MOLLE pouches if you need more load-bearing capacity or run it slick with the 3 built-in M4/AR-15 magazine pouches and move fast with the added protection of the pre-installed foam mock SAPI plates. The vest is fully adjustable, with velcro adjustments on each shoulder to customise the ride height and bungee cord at the rear to allow for practically any body type. 

Available in a wide range of colour options suitable for any style, this JPC is what you need if you like your Airsoft kit cheap and cheerful! 

£39.99
  • MOLLE equipped
  • Adjustable shoulders & cummerbund
  • JPC replica - Look the part on the cheap!

If you want to look like a real baller at your next skirmish but your budget is limited, fear not! The Delta Armory Jump Plate Carrier MOLLE Tactical Vest is a super affordable JPC replica, allowing you to get the look of the SAS, Navy SEALs or Delta Force for less than the price of a takeaway. Constructed from Nylon with bungee cord mag pouch retainers and cummerbund adjustment, the Jump Plate Carrier is a low-profile plate carrier designed with parachute jumping in mind. 

While it may be low-profile, the JPC has plenty of MOLLE attachment loops and all sides, allowing you to kit it out with MOLLE pouches if you need more load-bearing capacity or run it slick with the 3 built-in M4/AR-15 magazine pouches and move fast with the added protection of the pre-installed foam mock SAPI plates. The vest is fully adjustable, with velcro adjustments on each shoulder to customise the ride height and bungee cord at the rear to allow for practically any body type. 

Available in a wide range of colour options suitable for any style, this JPC is what you need if you like your Airsoft kit cheap and cheerful! 

£39.99
  • MOLLE equipped
  • Adjustable shoulders & cummerbund
  • JPC replica - Look the part on the cheap!

If you want to look like a real baller at your next skirmish but your budget is limited, fear not! The Delta Armory Jump Plate Carrier MOLLE Tactical Vest is a super affordable JPC replica, allowing you to get the look of the SAS, Navy SEALs or Delta Force for less than the price of a takeaway. Constructed from Nylon with bungee cord mag pouch retainers and cummerbund adjustment, the Jump Plate Carrier is a low-profile plate carrier designed with parachute jumping in mind. 

While it may be low-profile, the JPC has plenty of MOLLE attachment loops and all sides, allowing you to kit it out with MOLLE pouches if you need more load-bearing capacity or run it slick with the 3 built-in M4/AR-15 magazine pouches and move fast with the added protection of the pre-installed foam mock SAPI plates. The vest is fully adjustable, with velcro adjustments on each shoulder to customise the ride height and bungee cord at the rear to allow for practically any body type. 

Available in a wide range of colour options suitable for any style, this JPC is what you need if you like your Airsoft kit cheap and cheerful! 

£49.99
  • Programmable MOSFET/ETU
  • Burst mode, binary trigger, pre-cocking
  • Compatible with M4/AR-15 AEG with V2 gearbox

If you are looking for an affordable way to add advanced functionality to your M4/AR-15 AEG, this is worth a look! The Delta Armory Programmable ETU Processor Unit for V2 Gearbox replaces your conventional trigger assembly and offers burst mode, binary trigger and pre-cocking, all of which can be programmed in using the fire controls of the AEG itself. 

This ETU should fit most M4/AR-15s which use a version 2 gearbox, but we only recommend this part for experienced techs and those in the know when it comes to Airsoft internal upgrades. The ETU is also pre-wired to a Deans/T-Plug battery connector in rear wired configuration and spade connectors for your motor, so you shouldn't need your soldering iron!

From £119.99
  • 6.03mm Tightbore inner barrel
  • Pre-upgraded version 2 gearbox
  • High density polymer construction

If you are looking for a base gun for your dream custom AR or you like the classic look, the Delta Armory DA-C01 CHARLIE™ M4A1 is what you need. This M4/AR-15 AEG is styled after the original M4A1 rifle of the 1990s but with some 21st-century ergonomic enhancements to improve handling and a styled-up Delta Armory receiver matching modern real steel "billet" receivers. 

Being a replica of the Delta Armory CHARLIE™ line, the DA-C01 is constructed primarily from high density polymer with alloy trim parts and is kitted out on the inside with a tightbore inner barrel, a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. 

With more pre-upgraded internals than a platform this price deserves and some stylish, modern enhancements, the DA-C01 would make a fine basis for a custom build but can also be left as it is to take advantage of some interesting old-school features!

From £129.99
  • 6.03mm Tightbore inner barrel
  • Pre-upgraded version 2 gearbox
  • High density polymer construction

If military-style M4s are your poison and you need a new platform for close quarters, the DA-C02 CHARLIE™ M4/AR-15 CQBR AEG is a sure choice. This AEG is styled after the CQBR (Close Quarters Battle Receiver) configuration of the M4A1 rifle, a drop-in upper receiver kit issued to Army Rangers, Delta Force and Navy Seals, fitted with a 10.5-inch outer barrel and KAC RAS Style quad railed handguard. 

To furnish the CQBR M4 configuration with some modern ergonomics, Delta has added a gunfighter mod.3 style pistol grip and the awesome Delta Armory battery stock and enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. As a replica of the Delta Armory CHARLIE™ line, the DA-C02 is constructed primarily from high density polymer with alloy trim parts to provide manageable weight so you can make energetic advances all day long. 

Internally, the DA-C02 is generously kitted out with a tightbore inner barrel, a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. If you need a solid, lightweight workhorse of an M4 platform with plenty of future upgrade and customisation options, the DA-C02 CQBR is exactly that. A platform this price has no business being so good straight out of the box! 

From £129.99
  • 6.03mm Tightbore inner barrel
  • Pre-upgraded version 2 gearbox
  • High density polymer construction

If you love the standard issue US Army M4A1 carbine, this should suit you! The Delta Armory DA-C03 CHARLIE™ M4A1 RAS AEG is styled after the M4A1 as it is issued to the US Army, featuring a RAS style quad 20mm railed handguard, M4A1 barrel profile with M203 cutout and the iconic AR-15 triangular front sight, along with some thoughtful modern ergonomic enhancements to improve handling. 

On the outside, Delta has added a gunfighter mod.3 style ergonomic pistol grip and the awesome Delta Armory battery stock and enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. As a replica of the Delta Armory CHARLIE™ line, the DA-C03 is constructed primarily from high density polymer with alloy trim parts to provide manageable weight and maintain peak agility in game. 

On the inside, the DA-C03 is kitted out with a tightbore inner barrel, a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. Needless to say, this platform is superb value considering its features and is the perfect AEG for a new skirmisher who wants a cost-effective primary without any performance compromises!

About Delta Armory

Delta Armory specialises in Airsoft M4/AR-15 style AEGs designed by players, for players. With a variety of different Airsoft AR platforms available in 3 different build material options, Delta Armory has your back whether you are looking for an authentic full metal build or a lightweight polymer platform.

Delta Armory has big plans for the future, including expanding its M4/AR-15 AEG options to include electronic trigger units, flat HOP-up parts and much more. For now, Delta Armory replicas come in 3 different types. Read more about them below!

ALPHA™

The Delta Armory ALPHA™ line of Airsoft AEGs is its top-of-the-range option, offering full metal AEGs for perfect realism with the rock-solid, proven Delta Armory internal feature set. ALPHA™ series AEGs are for those who demand the most realistic experience and plan to end each skirmish day with burning biceps and a sense of achievement! 

BRAVO™

BRAVO™ AEGs from Delta Armory are the perfect middle ground between hefty full metal AEGs and lightweight, skirmish-focused polymer AEGs. BRAVO™ AEGs are great for those who want realistic handling without overburdening themselves with excess weight!

CHARLIE™

The AEGs of the CHARLIE™ series are constructed entirely from high-density polymer, making them perfect for new skirmishers or agile playstyles. Though they may be affordable, the CHARLIE™ series doesn't compromise when it comes to build quality or performance!