Refine results
Refine by
Featured
Viewing 30 of 62.
grid
list
£10.99
  • 130rnd Capacity
  • Reinforced polymer construction
  • For AK47/74 AEG rifles

Looking for AK magazines for a modern, tactical AK AEG? The CYMA 130rnd Reinforced Polymer Magazines have the looks you need, with some enviable functionality built in. These magazines have a ribbed exterior body which both strengthens the shell and provides gripping surfaces for better control over the mag in wet weather, and are constructed from rough textured reinforced polymer. The baseplate is also ribbed and flared out to allow better grip when ripping the mag from a pouch when you are reloading in a hurry.

This is a replica of a modern AK magazine design known as the "Intrafuse", and would suit a modern tactical 5.56 or 5.45 style AK build perfectly but will fit and feed in AK AEGs of all stripes. This magazine is a spring fed mid-cap which is loaded using an Airsoft speed loader or loading rod through the fill/feed port on the top of the magazine.

£6.99
  • 140rnd Capacity
  • Polymer construction
  • Affordable Mid-caps for AK AEG!

If you want a full loadout of many, many magazines, but you don't want to be weighed down by pouches full of unnecessary steel, the NUPROL Essentials 140rnd Mid-cap for AK AEGs would be perfect for you. This magazine is styled after the original AK47 7.62x39mm steel magazine but is constructed from lightweight polymer so you can carry ten and still remain agile. The magazine holds 140 BBs and can be loaded through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod/tool. This magazine is a 7.62 style mag, and is most appropriately used in 7.62mm AK replicas such as the original AK47, the AKM and the AIMS, but will fit and feed in most Airsoft AK AEG rifles.

£9.99
  • 150rnd Capacity
  • Polymer Construction
  • Medium Capacity Mag

A replacement magazine for Airsoft AK47 / 74 AEG, which are based off Tokyo Marui Style designs, such as the CYMA AEG.

£9.99
  • Polymer Construction
  • 530rnd Wheel wound high-cap magazine
  • For Airsoft AK AEG series

If you have a modernised tactical AK rifle inspired by the US civilian tactical community, this magazine belongs on your AEG! The 530rnd Polymer High-cap Magazine from Battleaxe is a reinforced design with deep ribs across its surface and linear serrations at the front and rear to assist you in keeping a tight grip on the magazine during a speedy reload. The mag also has an angled baseplate, intended to provide additional clearance for those who use a vertical foregrip on their AK47 AEG. This magazine is compatible with any Airsoft AK AEG that takes Tokyo Marui style magazines and is styled after the real "US Palm" AK magazine which is widely used in the US due to its reliability and well thought out design. This magazine holds 530 6mm BBs and can be filled through the fill window at the top of the magazine, and is wound up using the winding wheel on the base plate.

£9.99
  • Polymer construction
  • 500rnd wheel wound high-cap magazine
  • For AK Airsoft AEG series

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK74 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong reinforced polymer shell with ribs across all its surfaces, to add strength to the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch for fast and easy reloads. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its shallow curve is a tell-tale sign that this is a 5.45 style AK magazine, for those who like to keep it real!

£9.99
  • 600rnd Capacity
  • Steel construction
  • For AK47/74 AEG rifles

If you want your magazines to feel as real as your gun, step right up! The NUPROL 600rnd High-cap magazine not only boasts an immense 600 BB capacity but is constructed from steel just like the real AK47 30-round magazine. This mag has all the details you would expect to see on an AK47 mag, including the stamped reinforcing grooves on either side and the "spine", where the two stamped halves of the real magazine meet.

The magazine release lug and front magazine well lug are constructed from polymer to ensure you don't damage any alloy or polymer parts on your AK when inserting the magazine, as are the internals of this wheel-wound high-cap. The magazine can be filled through the fill window at the top of the magazine body and is wound using the winding wheel located on the baseplate. This mag is a 7.62x39mm style magazine so is real-world accurate for AK47, AKM and AIMS rifles (others too), but will fit and feed in most Airsoft AK series AEG rifles.

£10.99
  • 120 Round Capacity Magazine
  • Lightweight Polymer
  • High Quality Replica



A 6mm BB medium capacity magazine replica, based on the Bakelite-polymer Magazines of the AK74 series of weapons, designed for use with E&L Airsofts line of various replica AK74 AEGs. 

£10.99
  • Three Colour Options
  • For LCT AK Series
  • 70rnd Capacity


A series of 70rnd Polymer constructed magazines for LCT AK platform Airsoft Electric Guns. They feed BBs into the gun via a spring until completely empty, and are ideally loaded via a Speedloader. They are a replica of the 5.45x39mm magazines but will work in any LCT branded AK platform AEG, and are available in a choice of three colours.

£10.99
  • High Capacity mag
  • For CM.099 VSS Vintorez
  • Wheel or key wound

A 320rnd High Capacity Magazine for the CM.099 VSS Vintorez AEG, filled with BBs by pouring them into the Fill Window at the top of the Mag. A Clockwork Winding Wheel is turned at the base of the Magazine to start feeding BBs through the mechanism, just like any other Hi-Cap.

£12.99
  • Medium Capacity magazine
  • No rattle
  • For CYMA VSS Vintorez

So you are after new magazines for your sneaky Russian DMR assault rifle thing? There's little point in having such a stealth-oriented setup if your magazines rattle! Introducing the 150rnd Mid-cap magazine for the CYMA CM.099 VSS Vintorez, granting you the capacity to compete but without the rattle of high-cap magazines. The magazine features reinforcement ribs on the outside which double as gripping surfaces, and is constructed from high-density polymer. These magazines fit and feed in the CYMA CM.099 VSS Vintorez but are not compatible with AK AEGs. 

£16.99
  • Steel Shell
  • 70rnd Capacity
  • For LCT Brand AKs

A metal constructed magazine for the LCT branded LCK47 series of Airsoft Electric Gun which holds a total of 70rnds and feeds BBs into the gun via a spring until completely empty. It features a Steel shell for enhanced realism and is designed around the traditional Waffle style 7.62x39mm magazines for the AK. We recommend the use of a Speedloader to fill this magazine.

£18.99
  • For G&G RK74
  • Smoked/Tinted
  • 115rnd Capacity

A 115rnd Mid-Cap (Medium Capacity) Magazine for the G&G branded AK Platform Replicas, such as the RK74 series. The Magazine is filled from the top using a Speedloader, and features a smoked / transparent outer shell. Being a Mid-Cap Magazine this will feed until it is empty, without rattling like a High-Cap. It even has the Elongated Follower featured in the OEM Mags, to make sure you're using every last BB in the mag. If you own an RK74 series AEG and want to carry more ammunition in the field, the stock up today.

£18.99
  • 150rnd Capacity
  • For AK AEG series
  • Strong feed spring - Great for high rates of fire

If you have an AK with an incredible rate of fire, you will need some enhanced magazines to keep up! Introducing the TPM-AK, the latest enhanced magazine from PTS Syndicate, the number 1 name in high performance Airsoft magazines. The TPM-AK is compatible with practically any AK AEG but is styled after 5.56mm AK magazines available on the civilian market in the US. This magazine is a spring fed mid-cap and can be loaded using a speedloader through the fill/feed port on the top of the mag.

£19.99
  • 100rnd Capacity
  • 9x39mm Replica
  • AS VAL/VSS/SR-3

A Polymer constructed 100rnd Mid Cap magazine for the AS VAL / VSS / SR-3 family of Assault Rifles. The magazine is loaded using a Speedloader and feeds BBs into the gun until completely empty. 

£19.99
  • Unique Design
  • 130rnd Capacity
  • For LCK-12 / LCK-15

A Polymer constructed magazine for the LCT branded LCK-12 and LCK-15 Airsoft Electric Gun, which holds a total of 130rnds and features the typical unique design of the platform. It is loaded from the top using a Speedloader, and feeds BBs into the gun until completely empty for a rattle free experience, which is great for those who like to stay sneaky. If you own an LCT branded LCK-12 or LCK-15 and want to carry more ammunition in the field, and in style, then this is the perfect buy.

£24.99
  • 5.45x39mm Replica
  • 130rnd Capacity
  • Black or Brown


A Polymer constructed replica of the Bakelite 5.45x39mm magazines for AK74 platform rifles. They are Mid-Cap magazines which feed BBs via a spring until completely empty, and hold a total of 130 BBs. These magazines will work with any LCT AK platform replica, regardless of them being styled around the AK-74 series magazines. We recommend the use of a Speedloader to fill these magazines.

£25.99
  • 70rnd Capacity
  • Steel Outer Shell
  • For AS VAL / VSS Family

A Steel manufactured replica of the extended magazine for the AS VAL / VSS / SR-3 family of Assault Rifles, which holds a total of 70rnds, and is loaded from the top of the magazine via a Speedloader. The mag is a low-cap design which feeds BBs into the gun via a spring until completely empty. This means no 'battle rattle' and allows you to sneak up on the enemy without giving yourself away. If you own an AS VAL family Assault Rifle and need to carry more ammunition in the field, this is the perfect purchase for you.

£34.99
  • Official Magazine
  • 600rnd Hi-Cap
  • Alloy Shell

An official magazine designed by BOLT for their AK series of Airsoft Replica, which works in both their AK range and BR-47 'Mutant 'range of guns. The magazine is wheel wound and holds up to 600 rounds, which are loaded from the top using an opening door to fill, and then wound from the bottom. The magazine is constructed with an alloy shell for added realism, with polymer internals. These magazines are perfect for any Airsoft skirmisher who owns a BOLT AK magazine using replica and are wanting the exact magazines designed for their replicas.

£39.99
  • 430rnd capacity
  • Clear design
  • Clockwork Winding

A 430 round capacity magazine for AK platform, this G&G mag features a clear design and polymer build. BB's are loaded via the fill window at the top of the mag, then turning the clockwork winding wheel on the base of the mag feeds the BB 's through the mechanism.

£49.99
  • For E&L Airsoft AK47 AEGs
  • 5x 120rnd Magazine
  • Mid-Cap Design



Keep your rate of fire up! A bundle of 5 E&L Airsoft's AK47 AEG 120 round Airsoft BB magazines, designed to accurately replicate the external appearance of the real AK47 magazines

£59.99
  • Mega Magazine
  • 160rnd Capacity
  • Be King of The Slavs

A Steel constructed mega-mag for the LCT series of AK replicas, which is a Mid-Cap design holding a total of 160rnds. It is made with a Steel outer shell and is loaded using a Speedloader.  Do you feel self-conscious about the size of your mag? Upgrade to a mega-mag today and become King of the Slavs.

£72.99
  • 2000rnd Capacity
  • Electric Drum Magazine
  • Battery Powered (3 x AA)

A Full Metal Electric Drum Magazine which holds a total of 2000rnds and automatically winds BBs into your LCT branded RPK, being powered by 3 x AA batteries. If you want to take your RPK to the next level of pain administration, and be a sight to behold on the skirmish field, then the LCT RPK Drum Magazine is the way to go.

£94.99
  • Manual winding
  • Massive 2200 round capacity
  • High density Polymer construction

If you are looking for some extra firepower for your AK AEG, you have found it with G&Gs drum magazine! With a whopping 2200 round capacity, you will easily have enough BBs on board to keep the entire enemy team's heads down!

£5.99
  • Steel Shell
  • No Battle Rattle
  • Feeds Until Empty

This Steel constructed 150rnd Magazine is designed for AK Platform variants and features a Mid-Cap design, meaning that it will feed until empty and doesn't make any 'rattle' sound like High-Cap designs. Beautifully replicating the Steel Waffle mags that are often seen in the traditional AKM models, this Magazine is eye-catching and looks right at home on any flavour of the AK family.

£6.99
  • 500rnd Capacity
  • Widely Compatible
  • Clockwork Winding

A 500rnd High Capacity Magazine for AK Platform Airsoft Electric Guns, filled with BBs by pouring them into the Fill Window at the top of the Mag. A Clockwork Winding Wheel is turned at the base of the Magazine to start feeding BBs through the mechanism, just like any other Hi-Cap.

£6.99
  • 150rnd Capacity
  • Polymer construction
  • For Airsoft AK47/74 AEG rifle series

Looking for AK74 magazines for a modern loadout? The 150rnd Mid-cap from CYMA is constructed from polymer with a steel feed spring and baseplate and is patterned after more modern polymer magazines issued with AK74 and AK105 rifles in Russian service and civilian use. For a modern AK74/105 loadout this magazine is perfect. This is a spring loaded mid-cap magazine and can be loaded through the fill/feed port at the top of the magazine body, using either a speed loader or a loading rod/tool. The advantage of mid-cap magazines is that they do not rattle, and can be an asset to a sneaky player who wants to move fast and still get the drop on the enemy team. This magazine is a 5.45x39 style magazine and is most appropriate for an AK74, AK105 or AKS74U AEG but will fit and feed in most AK platform AEGs.

£7.99
  • 150rnd Capacity
  • Polymer construction - Bakelite orange colour
  • For Airsoft AK47/74 AEG rifle series

Looking for AK74 magazines for a Soviet-era loadout? The 150rnd Mid-cap in Bakelite Orange from CYMA is constructed from polymer which is dyed to match the Bakelite magazines issued with the earliest variants of the AK74 rifle to the Soviet Army. This magazine is a spring loaded mid-cap and can be loaded through the fill/feed port at the top of the magazine body, using either a speed loader or a loading rod/tool. The advantage of mid-cap magazines is that they do not rattle, and can be an asset to a sneaky player who wants to move fast and still get the drop on the enemy team. This magazine is a 5.45x39 style magazine and is most appropriate for an AK74 or AKS74U AEG but will fit and feed in most AK platform AEGs.

£7.99
  • 150rnd Capacity
  • Polymer construction
  • Compatible with any Airsoft AK47/74 AEG

If you have an AK, but you ain't no Russian, this is the magazine you will probably want. The Modern Mid-cap Magazine from CYMA is compatible with most Airsoft AK47/74 series AEGs and is patterned after modern AK rifle magazines sold on the US civilian market. This magazine is straight in profile, making it realistic for AK rifles in 5.56mm and 5.45mm Russian, and its waffle style external ribs provide the modern look and superb gripping qualities, ensuring you have a firm grip on your magazine during a fast reload. The magazine is constructed from polymer with a steel feed spring, and can be loaded through the fill/feed port on the top of the magazine body using a speed loader or loading rod.

£8.99
  • 220rnd Capacity
  • Metal Construction
  • Wind Up Base & Side

A compact magazine for your Airsoft AEG AK47 or 74 series rifle.

£8.99
  • Polymer shell with steel feed spring and base plate
  • Loooonngg magazine  - 45 round RPK style
  • 140rnd Medium capacity mag for AK AEG series

Looking for greater mag capacity without having to wind? If you are rocking the support weapon version of the venerable AK platform, the RPK, or any AK Airsoft AEG, this magazine will suit your needs perfectly! This 140rnd mid-cap magazine is styled after the 45 round RPK-74 magazine issued with the support weapon version of the AK. The magazine holds 140 BBs and can be loaded through the fill/feed port at the top using a standard Airsoft speed loader, and is a spring-fed mid-cap, meaning you can sneak around with one of these on your rifle without giving your position away! The magazine is constructed with a polymer shell, steel feed spring and steel base plate, and is compatible with any standard AK47/74 Airsoft AEG rifle.

AK Platform Magazine for Gas and Electric Rifles

Huge discounts on airsoft magazines for AK series of Airsoft AEGs including, AK47s, 74s and more. A wide range of brands including Classic Army, Tokyo Marui, ASG and more. All are available at our airsoft shop in Huddersfield near Leeds and Manchester.

If you can't find something that you like, or want something which isn't on the website why not contact us via Phone and we can do our best to source it for you! 

Telephone: 01484 644709