Airsoft Foregrips

A Polymer constructed Angled Foregrip for 20mm Rail Systems, which provides a comfortable point to achieve a strong grip over your Airsoft Gun.

A Polymer constructed Angled Foregrip for 20mm Rail Systems, which provides a comfortable point to achieve a strong grip over your Airsoft Gun.

A Polymer constructed Angled Foregrip for 20mm Rail Systems, which provides a comfortable point to achieve a strong grip over your Airsoft Gun.

A slight angled fore grip designed to stiffen up your grip and aid in improved accuracy down range. A must for anyone wishing to keep a low profile and slick look but gain a tactical advantage on a longer weapon or super CQB package.

A slight angled fore grip designed to stiffen up your grip and aid in improved accuracy down range. A must for anyone wishing to keep a low profile and slick look but gain a tactical advantage on a longer weapon or super CQB package.

For those of you looking for a sturdier grip and improved handling, the Compact Vertical Grip for M-LOK Handguard from Element allows you to keep a low profile with a longer platform at range or a tougher grip when running and gunning during CQB.

For those of you looking for a sturdier grip and improved handling, the Compact Vertical Grip for M-LOK Handguard from Element allows you to keep a low profile with a longer platform at range or a tougher grip when running and gunning during CQB.

An ergonomically designed 20mm RIS foregrip, created to promote a comfortable and natural grip on their Airsoft gun. Constructed from high quality polymer with a slightly textured surface.

An ergonomically designed 20mm RIS foregrip, created to promote a comfortable and natural grip on their Airsoft gun. Constructed from high quality polymer with a slightly textured surface.

A very easy to use fore grip that can be locked in a compact or full vertical position depending on your situation and requirements. 

If you're after a high-quality handstop to finish off your KeyMod or M-LOK build, the M-ETAL TD Halo Hand Stop for KeyMod & M-LOK is a great shout. Made from aluminium with steel nuts and bolts, this angled foregrip/handstop is a low-profile design with an ergonomic shape, designed to keep your hand comfortably indexed, especially if you use the "C-Clamp" grip technique.

Its skeletonised design keeps weight to a minimum, while being made from aluminium makes the TD Halo far stronger than equivalent polymer grips. If you're a skirmisher who values ergonomics and strength, the M-ETAL TD Halo Hand Stop for KeyMod & M-LOK belongs on your build!

If you're after a high-quality handstop to finish off your KeyMod or M-LOK build, the M-ETAL TD Halo Hand Stop for KeyMod & M-LOK is a great shout. Made from aluminium with steel nuts and bolts, this angled foregrip/handstop is a low-profile design with an ergonomic shape, designed to keep your hand comfortably indexed, especially if you use the "C-Clamp" grip technique.

Its skeletonised design keeps weight to a minimum, while being made from aluminium makes the TD Halo far stronger than equivalent polymer grips. If you're a skirmisher who values ergonomics and strength, the M-ETAL TD Halo Hand Stop for KeyMod & M-LOK belongs on your build!

If you're after a high-quality handstop to finish off your KeyMod or M-LOK build, the M-ETAL TD Halo Hand Stop for KeyMod & M-LOK is a great shout. Made from aluminium with steel nuts and bolts, this angled foregrip/handstop is a low-profile design with an ergonomic shape, designed to keep your hand comfortably indexed, especially if you use the "C-Clamp" grip technique.

Its skeletonised design keeps weight to a minimum, while being made from aluminium makes the TD Halo far stronger than equivalent polymer grips. If you're a skirmisher who values ergonomics and strength, the M-ETAL TD Halo Hand Stop for KeyMod & M-LOK belongs on your build!

A tough Polymer foregrip for M-LOK rail systems, is ridged to provide good grip, comes supplied with everything you need to attach it, and provides a more stable platform for manipulating your replica.

A tactical folding Vertical Foregrip, designed for use with Airsoft AEG and GBB rifles, which allows the user to flip it down when required and fold back up when not in use to give it a lower profile.

If you are undecided when it comes to vertical grips and sometimes like the old-school ways, this Folding Vertical Grip from CYMA is ideal for you! Constructed from high density polymer with a steel folding mechanism, the Folding Vertical Grip can be mounted to any 20mm Picatinny rail via its spring-loaded QD mount. 

To mount the grip, simply push the textured end of the locking bar on the mount in and slide it onto the front of your rail. When you release the locking bar, the grip will stay right where it is. To fold and unfold, simply press the central screw-like button and position the grip in either the horizontal or vertical position. 

At the front of the grip, we are treated to a hand stop-like curved protrusion intended to prevent you from slipping off the grip and potentially shooting your hand; a useful feature if you mount this right at the front of a short-barreled platform. If you're looking for an affordable 20mm Picatinny grip solution with plenty of functionality, the CYMA Folding Vertical Grip is one to watch!

A Foregrip for 20mm Rail Systems, that will install anywhere on 20mm RIS/RAS and provide a comfortable and stable point to grip your replica. The Grip has a cutout on the side for Pressure Pads, should you be running a Torch or Laser. The Grip is easily installed onto Rails by pulling down the Spring-Loaded Tabs at the top of the Grip and sliding it into position. With ridges on the externals, this Grip offers a great hold even when wearing gloves.

The Cybergun FN Herstal Vertical Picatinny Grip is a slightly angled vertical foregrip designed to stiffen up your grip and aid in improved accuracy down range. The grip latches onto a 20mm RIS/RAS rail section and then tightens together with an Alenn key. Once installed, it sits sturdy! The bottom of the grip has a latch base that can be opened by pushing in the tab, perfect for you to store batteries or tactical snacks. The whole unit is manufactured from a very strong polymer and an alloy bolt for fixing to your Airsoft rifle.

The front and rear faces are also textured in a stripy pattern for added grip. It also features an FN Herstal trademark on the bottom of the foregrip which looks amazing, it's just a shame it's hidden away underneath the grip. There is a choice of the iconic SCAR tan colour or a tactical black coloured foregrip.

The Cybergun FN Herstal Vertical Picatinny Grip is a slightly angled vertical foregrip designed to stiffen up your grip and aid in improved accuracy down range. The grip latches onto a 20mm RIS/RAS rail section and then tightens together with an Alenn key. Once installed, it sits sturdy! The bottom of the grip has a latch base that can be opened by pushing in the tab, perfect for you to store batteries or tactical snacks. The whole unit is manufactured from a very strong polymer and an alloy bolt for fixing to your Airsoft rifle.

The front and rear faces are also textured in a stripy pattern for added grip. It also features an FN Herstal trademark on the bottom of the foregrip which looks amazing, it's just a shame it's hidden away underneath the grip. There is a choice of the iconic SCAR tan colour or a tactical black coloured foregrip.

A compact and solid Foregrip for 20mm Rail Systems, which is constructed from CNC Aluminium and is based upon a Russian grip design that is most often seen on AK Platforms, but will provide a stable platform for aiming any Rifle that has a 20mm Rail.

A Streamlined low profile 20mm RIS Vertical Foregrip with Internal Storage space. Designed by PTS to be the ultimate Dynamic tactical grip, the EPF2- (Enhanced Polymer Foregrip 2) is a revision of PTSs original and highly successful EPF grip, both of which are High-Speed / Low-Drag design, designed to avoid snagging on other equipment or clothing.

A Streamlined low profile 20mm RIS Vertical Foregrip with Internal Storage space. Designed by PTS to be the ultimate Dynamic tactical grip, the EPF2- (Enhanced Polymer Foregrip 2) is a revision of PTSs original and highly successful EPF grip, both of which are High-Speed / Low-Drag design, designed to avoid snagging on other equipment or clothing.

If you're kitting out your 20mm Picatinny handguard and need something to hold onto, the M-ETAL Picatinny Hand-Stop w/ QD Sling Swivel is ideal. Made from aluminium, this handstop is ideal for both super-serious military style builds or casual shooter builds!

Attached to the handstop is a QD sling swivel. This is a genius idea and allows you to set up a two-point sling on your handstop, then when you need to detach the sling, you can easily press the QD button with your thumb or index finger. It's a super useful attachment that serves multiple purposes without taking up a lot of rail space!

This stubby Foregrip is constructed using CNC Machined 6061 Aluminium for a superior finish, and is designed to provide a stable aiming position whilst also remaining compact and reduce snagging on your own equipment. It has an integrated 20mm Rail attachment and will easily fit to RIS/RAS Rail Systems. There is also a secret storage compartment inside the grip, accessed by unscrewing the base. If you're looking for a Russian style Foregrip for your AK or even Western Rifles, the 5KU Aluminium Russian Grip will fit the bill nicely.