Viewing 30 of 39.
grid
list
£9.99
  • Aluminium construction
  • Docter Red Dot sight footprint
  • For Novritsch SSP5 GBB Pistol

If you are rocking the Novritsch SSP5 GBB pistol that thing isn't complete without a red dot sight! The Novritsch Premium Red Dot Plate for SSP5 GBB pistol is designed specifically for the SSP5 series and is constructed from CNC machined aluminium with an anodised finish. This red dot plate uses the Docter red dot sight footprint and should fit any micro red dot sight with the Docter footprint, including the Novritsch Red Dot Sight Premium V3. If you want to take pure advantage of the borderline insane performance of the SSP5 at long range, this plate is the key!

£12.99
  • 120rnd Capacity
  • Mid-cap mag - No battle rattle
  • For Novritsch SSR9 AEG

If you're running the incredibly swift SSR9 AEG from Novritsch, you'll need loads of these to keep it fed! The Novritsch 120rnd Magazine for SSR9 AEG is constructed from high density polymer and can be loaded through the fill/feed port at the top of the mag body using a speed loader or loading rod. 

The slim design of these magazines allows you to carry plenty, and it goes without saying, you'll need a lot of these mags to keep up with the SSR9 DSG's insane rate of fire!

£49.99
  • 36rnd Capacity
  • High density polymer shell
  • For Novritsch SSQ22 GBB

If you need mags for your Novritsch SSQ22 GBBR you have found them! These magazines are styled after real steel 10/22 25-round magazines and are constructed from high density polymer with alloy internals and a steel feed spring. The outer shell of the magazine boasts textured panels to make the mag easier to grip during a speedy reload, and each magazine holds 36 BBs.

Loading the magazine can be done in one of two ways; Either pull the follower on the front of the magazine down to the bottom and load with a speed loader through the loading port on the front, or use a GBB adapter with your speed loader and load through the feed lips at the top of the mag. The gas fill valve is located on the bottom of the mag, and as with all gas magazines, the mag needs to be inverted in order to fill it. These mags work well with the Novritsch SSQ22 but unfortunately are not compatible with the ASG/KJ Works KC-02. If you are planning on running Novritsch's sporty new 10/22 style carbine, a few of these is a must!

£49.99
  • 49rnd Capacity
  • Green gas magazine
  • Compatible with Novritsch SSP18 series

If you're looking to make the most of your SSP19's full-auto fire mode, one of these will do it! The Novritsch 49rnd Extended Gas Magazine for SSP18 GBB is constructed from alloy and an extended design with a 49rnd capacity. This green gas magazine can be filled through the fill valve on the baseplate by inverting it, as you would with any other GBB mag. 

BBs are loaded either through the feed lips at the top or by holding the follower on the front down and filling through the widened section of the follower channel at the front. While it may be heavier and bigger than a standard mag, this is really the only way to do that rapid full auto mode justice!

£14.99
  • CNC Aluminium construction
  • Short or Long versions are available
  • Optics mount for SSP5 and SSP5 6" GBB

If you want to take pure advantage of the SSP5's incredible range and accuracy, an optics mount will get you there! The Novritsch 20mm Picatinny Top Rail for SSP5 GBB Pistol is compatible with all variants of the SSP5 GBB and is constructed from CNC machined aluminium for a perfect combination of low weight, high strength and flawlessly in-spec rail dimensions.

The Top Rail is available in two different lengths, a short version measuring approximately 6cm long and a longer version measuring approximately 10.1 cm. The rail is installed on the optics mount section of the fixed SSP5 outer barrel, meaning it says put while you tap tap tap that trigger for easier target acquisition and less chance your optic will take damage from recoil. If you are running your SSP5 as a primary, this mount is essential to make the most of its epic performance!

£14.99
  • CNC Aluminium construction
  • Short or Long versions are available
  • Optics mount for SSP5 and SSP5 6" GBB

If you want to take pure advantage of the SSP5's incredible range and accuracy, an optics mount will get you there! The Novritsch 20mm Picatinny Top Rail for SSP5 GBB Pistol is compatible with all variants of the SSP5 GBB and is constructed from CNC machined aluminium for a perfect combination of low weight, high strength and flawlessly in-spec rail dimensions.

The Top Rail is available in two different lengths, a short version measuring approximately 6cm long and a longer version measuring approximately 10.1 cm. The rail is installed on the optics mount section of the fixed SSP5 outer barrel, meaning it says put while you tap tap tap that trigger for easier target acquisition and less chance your optic will take damage from recoil. If you are running your SSP5 as a primary, this mount is essential to make the most of its epic performance!

£7.99
  • Replacement original part
  • For Novritsch SSP1 & SSP5
  • VSR/GBB Spec HOP-up rubber

Whether your HOP-up rubber is worn out or you are seeking an upgrade, the Novritsch HOP-up Bucking for SSP1/SSP5 GBB pistol is one to keep an eye on. This HOP-up bucking is a big reason that Novritsch pistols have such incredible range, and being a VSR/GBB style HOP-up rubber, this should be compatible with most TM-based GBB pistol designs as well as the VSR-10 sniper rifle series.

£14.99
  • 14mm CCW Male thread adapter
  • For Novritsch SSG24 Sniper rifle
  • Mount a tracer unit or suppressor

If you want your SSG24 to be more sneaky or you want to light the enemy up with a tracer unit, this thread adapter will do the trick! The 14mm CCW Suppressor Thread Adapter for SSG24 is constructed from CNC machined aluminium and replaces the front barrel cap on the Novritsch SSG24, providing 14mm CCW male barrel threads. These are the most common barrel threads used on Airsoft rifles, so with this adapter installed you have all the options in the world when it comes to customising your SSG24 and making it truly yours.

£34.99
  • Alloy construction
  • 20mm Picatinny rail & iron sights
  • For Novritsch SSR63 & AR36 AEGs

If you want to save some weight on your AR36 or Novritsch SSR63 and give it a whole new look, you have found what you need! The Novritsch Minimal 20mm Picatinny Rail Kit for SSR63/AR36 AEG is constructed from alloy with steel mounting bolts and is compatible with the full range of Novritsch SSR63 AEGs as well as most AR36 AEG and GBBR platforms. The part is manufactured by Double Bell, includes built-in flip-up iron sights and is based on the real steel KAC design. 

The set provides a 20mm Picatinny top rail measuring approximately 10cm in length, enough for most red dot sights and smaller magnified scopes while minimising excess material to keep the weight low. The built-in flip-up iron sights are fully adjustable, with a single rear aperture which can be raised and lowered by turning the drum just below the aperture and adjusted left and right via the drum on the right side. If your AR36 needs a style up or you want to lean in to the light and tight design philosophy of the Novritsch SSR63, this kit is the perfect upgrade!

£59.99
  • M-LOK Handguard, outer & inner barrel set
  • Compatible with Novritsch SSR63 A2 and SSR63 A3
  • Perfect for CQB and aggressive skirmishers

If you have the Novritsch SSR63 A2 or A3 and it is a bit long for your playstyle, this is what you need to shorten her up a bit! The Novritsch Short Conversion Kit for SSR63 A2/A3 AEG includes a "C" length outer barrel with 14mm CCW male threads at the tip, a 6.03mm tightbore inner barrel and a CNC aluminium M-LOK handguard with 20mm Picatinny rail sections in key locations. 

This set includes everything you need to transform your SSR63 A2 or A3 into the short configuration, shaving a few precious inches off the barrel so you can clear corners more effectively and have better mobility in CQB scenarios. Whether you want to hot-swap your SSR63 A2/A3 for the odd CQB game or you prefer a shorter primary to maximise aggression, this kit should suit you perfectly!

£14.99
  • Aluminium construction
  • Mount an action camera to your rail
  • Fits 20mm Picatinny rails 

If you're a talented skirmisher with skills to showcase, the Novritsch GoPro Adapter for 20mm Picatinny Rails should suit you perfectly. This CNC aluminium mount attaches to any 20mm Picatinny rail and provides a mount for GoPro-style action cameras with the socket mount. Please note, the barrel-mounted rail shown in the images is for demonstration purposes only and is not included with the set. 

The mount can be fitted to position the camera on the left or right side of your primary and only minimally affects the weight distribution and balance thanks to its lightweight aluminium build. If you have epic Airsoft moments to record for the ages, the Novritsch GoPro Adapter for 20mm Picatinny Rails is what you need!

£15.99
  • 530rnd Resealable Bottle
  • 0.46g 6mm BBs - Excellent for snipers and long range engagements
  • Biodegradable BBs are perfect for outdoor skirmishing

If you're in need of high performance, high accuracy BBs for your Airsoft Sniper Rifle then look no further! These Novritsch 0.46g 6mm biodegradable BBs come in a resealable bottle of 530 BBs and come pure white in colour.

BBs are a crucial factor when it comes to accuracy, a high quality BB can mean all the difference and Novritsch certainly doesn't disappoint. These BBs are second to none when it comes to long range engagements. The pure white colour allows you to track the full trajectory of the BBs no matter how far they travel. With Novritsch ensured quality control you can be sure you are getting only the most premium biodegradable BBs. The slick plastic bottle that these BBs are stored in allow for convenient transportation and also excellent compatibility with speedloaders.

£24.99
  • Aluminium construction
  • For scopes with 25mm monotubes
  • Fits 20mm Picatinny rails 

If you're moving away from standard scope rings in favour of something more modern and lightweight, the Novritsch One-Piece 20mm Picatinny Scope Mount; 25mm Tube is ideal. This single-piece scope mount follows modern trends, combining the front and rear scope ring for a more robust combination setup which is easier to mount as a bonus. 

Its aluminium construction keeps the weight of the One-Piece 20mm Picatinny Scope Mount to a minuscule 138 grams and its raised optical centreline means your scope sits slightly higher than usual, ideal for those who like to keep their knashers protected behind a face mask while skirmishing. Each ring also includes a single slot of 20mm Picatinny rail, ideal for micro red dot sights, Runcam/action cameras or whatever other equipment you need to complete the mission at hand!

Compatibility-wise, this mount should fit any LPVO or Rifle Scope with a 25mm monotube but will not fit 30mm monotube optics. If you want a more advanced scope mounting solution for your primary or have trouble looking through your scope due to your face-pro choice, the Novritsch One-Piece 20mm Picatinny Scope Mount; 25mm Tube is what you need!

£12.99
  • Polymer construction
  • For SSP18 GBB Pistol
  • Keep one in the toolbox just in case!

If you love your SSP18 and want to keep it shooting in the long term, having a Novritsch SSP18 Complete Nozzle can't hurt! This polymer loading nozzle is compatible with Novritsch SSP18 GBB pistols and is a fantastic part to have lying around to pre-empt potential disaster, especially if you use full auto a lot. If you're very attached to your SSP18 and don't ever want it to sit around awaiting spare parts, grab this to put your mind at ease!

£29.99
  • Aluminium construction
  • Integral bubble level
  • For 20mm Picatinny rails

If you need a scope mount with some interesting tricks up its sleeve, the Novritsch One-Piece 20mm Picatinny Scope Mount V2; 25/30mm Tube is exactly that! Constructed from aluminium with a QD 20mm Picatinny mounting interface, the One-Piece 20mm Picatinny Scope Mount V2 is easy to mount to any 20mm Picatinny rail and is nice and lightweight, tipping the scales at a surprisingly low 200 grams.

The V2 is compatible with either 25mm/1-inch or 30mm monotubes, making it useful for almost every magnified rifle scope out there thanks to the included ring spacers. On the top of each ring, we are treated to mounting holes for the included modular 20mm Picatinny rail section, allowing you to fit it to the front or rear ring and install a Runcam, micro red dot sight or whatever else you fancy. The V2 is set at the standard (for AR platforms) optical centreline height, making it ideal for most Airsoft platforms but if you need something a bit higher, check out the original One-Piece 20mm Picatinny Scope Mount; 25mm Tube!

Integral to the mount's design and visible from the rear we also have a bubble level, allowing you to ensure your rifle is perfectly horizontal before taking that key, game-winning shot. If you love a lightweight scope mount which is easy to fit and packs in a lot more functionality than its rivals, the Novritsch One-Piece 20mm Picatinny Scope Mount V2; 25/30mm Tube will suit you perfectly!

£6.99
  • Steel construction
  • For Novritsch SSG10 A3
  • Complete replacement screw set

If you've misplaced a screw from your SSG10 A3, the Novritsch SSG10 A3 Stock Screw Set is what you need! This set includes all of the stock screws for the SSG10 A3, constructed from steel and finished in black, just like the original screws. This screw set is only for the SSG10 A3 but may also be useful for those running the Maple Leaf MLC-S2 chassis on a VSR10 platform. 

£24.99
  • Aluminium construction
  • Textured surface for extra grip
  • Compatible with Novritsch SSG10 series

If you've put a strong spring in your SSG10 and want to cock it easily, the Novritsch Enlarged Bolt Handle for SSG10 is what you need! Constructed from aluminium with a deeply textured surface, this bolt handle is designed to provide extra purchase for easier cocking and faster follow-up shots.

The Enlarged Bolt Handle is also shaped to provide clearance for any optical sight you may have mounted, avoiding smashing your knuckles on your scope when working in a hurry. Whether you need more grip on your SSG10 for wet weather skirmishes or faster follow up shots the Novritsch Enlarged Bolt Handle is ideal for the job!

£84.99
  • 3x Optical zoom
  • Flip-to-side mount pre-installed
  • Ideally used with Novritsch Red Dot Sight V2

If you're running the Novritsch Red Dot Sight V2 but want to see further, the Novritsch 3x Optic Magnifier with Flip-to-Side Mount is what you need! This flip-to-side magnifier offers 3x magnification, making distant targets easy to spot and allowing you to turn your RDS into a long-range optic and flip back to close range instantly via the flip-to-side mount. 

The mount is ready to rock on any 20mm Picatinny rail and offers standard M4/AR-15 height over bore, matching the optical centreline of most red dot sights but ideally used with the Novritsch Red Dot Sight V2. Windage and elevation adjustment dials are present on the left side and top respectively. At the rear, we have a focus adjustment dial so you can adjust to get the clearest image of your target and reticle. If you operate in a mixed environment and often need to handle both close and long-range threats, the Novritsch 3x Optic Magnifier with Flip-to-Side Mount belongs on your primary!

£29.99
  • Aluminium construction
  • Mounts to 14mm CCW male threads
  • Internal foam baffles to reduce muzzle report

If you are looking for a sneaky aesthetic and reduced muzzle report, the Novritsch Rifle Suppressor will give you just that! This suppressor is constructed from aluminium and has internal baffles made from acoustic foam which will reduce the muzzle report of your primary and make you harder to locate.

The Novritsch Rifle Suppressor is compatible with any Airsoft gun which uses 14mm CCW male barrel threading and has an aggressive ported front end, providing some visual interest to the design which marks it out as something a bit different from the usual, boring tube suppressors.

On the inside, Novritsch has gone above and beyond, using 2 different sized baffles to muffle the muzzle report, widening at the end to prevent BBs from shattering inside and ruining that perfect shot. The front cap can also be removed, so if you want to change the filling to your own secret suppression formula, you are free to do so. Whether you are taking your sniper rifle build in a sneaky direction or you are creating an assault rifle with an emphasis on stealth, the Novritsch Rifle Suppressor is the perfect finishing touch!

£24.99
  • Aluminium construction
  • Fits 14mm CCW male barrel threading
  • Straight fluted or spiral fluted options

If you want to give your primary the stealthy aesthetic without compromising its agility, the Novritsch Integrated Suppressor will do the trick! Designed by the Novritsch dev team in Austria with a focus on pure performance, the Novritsch Integrated Suppressor only adds a mere 130g to the weight of your rifle and is nice and slim so it can be installed as an integral suppressor, recessed inside an M4/AR-15 rail system. 

Styling-wise, there are two options up for grabs. The spiral-fluted option (V1) fits the Novrtisch aesthetic perfectly, matching the spiral-fluted barrels on many Novritsch platforms. The straight-fluted version (V2) has more sleek, linear grooves on its surface for a bit of variety but still stands out from more basic tubular suppressors. The Integrated Suppressor is designed to mount to 14mm CCW male threaded outer barrels, meaning it will fit most Airsoft AEGs along with the Novrtisch SSX303, SSR4, SSR63, SSR90, SSQ22 and SSR9 platforms. 

£24.99
  • Aluminium construction
  • Fits 14mm CCW male barrel threading
  • Straight fluted or spiral fluted options

If you want to give your primary the stealthy aesthetic without compromising its agility, the Novritsch Integrated Suppressor will do the trick! Designed by the Novritsch dev team in Austria with a focus on pure performance, the Novritsch Integrated Suppressor only adds a mere 130g to the weight of your rifle and is nice and slim so it can be installed as an integral suppressor, recessed inside an M4/AR-15 rail system. 

Styling-wise, there are two options up for grabs. The spiral-fluted option (V1) fits the Novrtisch aesthetic perfectly, matching the spiral-fluted barrels on many Novritsch platforms. The straight-fluted version (V2) has more sleek, linear grooves on its surface for a bit of variety but still stands out from more basic tubular suppressors. The Integrated Suppressor is designed to mount to 14mm CCW male threaded outer barrels, meaning it will fit most Airsoft AEGs along with the Novrtisch SSX303, SSR4, SSR63, SSR90, SSQ22 and SSR9 platforms. 

£13.99
  • 28rnd Capacity
  • Transparent polymer construction
  • For NOVRITSCH SSG10 and VSR10 Sniper Rifles

If you need spare magazines for your Novritsch SSG10 you have found them! The 28rnd Transparent Magazine For SSG10/VSR10 Sniper Rifle is constructed from transparent polymer to allow you to keep track of your remaining ammo without having to remove the magazine mid firefight! Once again, Novritsch hits the nail on the head; being able to check your capacity by inverting your rifle means you will never be caught dryfiring at a critical moment.

The mag holds 28 BBs and can be loaded through the fill/feed port at the top front of the mag using a speed loader or loading rod. Compatibility-wise, this magazine is ideal for the Novritsch SSG10 sniper rifle but should also work in other VSR10-based designs such as the JG BAR10, Tokyo Marui VSR10 variants and the CYMA CM.701. Lock and load with the added assurance that you will never take aim, steady your breathing and press the trigger only to send a big fat nothing downrange!

£28.99
  • 24rnd Capacity
  • Green gas magazine
  • For Novritsch SSP18 GBB Pistol

If you are treating yourself to the shiny new SSP18 GBB from Novritsch you will need some mags! The 24rnd Green Gas Magazine V1 is designed for the Novritsch SSP18 and will also fit most EU series GBB pistols. The magazine body is constructed from alloy with a polymer follower, polymer feed lips, a polymer baseplate, a steel feed spring and brass valves.

The fill valve is located on the base of the magazine and as with all Airsoft gas mags, the mag needs to be inverted to be filled with gas. Loading BBs can be done through the feed lips at the top, or by dragging the follower on the front down and loading through the widened channel at the bottom. A speed loader makes this much easier but isn't required. Being the V1 version, this mag is not compatible with the Novritsch CNC baseplates and uses a single-stage valve.

If you are running the SSP18 you will need a few of these to keep up with that fearsome full auto firemode!

£34.99
  • Aluminium construction
  • Portable and refillable green gas canister
  • Top-up your gas magazines mid-firefight!

If you want to carry extra gas on the field but don't want a clumsy and cumbersome gas can on your rig, the Novritsch Portable Gas Container is the right tool for the job. This convenient and compact gas canister can hold any type of Airsoft green gas, even the highest-pressure black gas (don't fill it with CO2 though!) and fits into most grenade and smoke grenade pouches.

The Container includes an aluminium cap which threads onto the top to protect the nozzle and a high-density foam ring to further protect the nozzle when stowed. Filling the container is as simple as it is any gas magazine, simply invert the canister and fill through the fill valve at the base.

If you're involved in longer skirmishes or like to keep a bit of extra gas handy to avoid the "dead man's click", the Novritsch Portable Gas Container belongs in your kitbag!

£13.99
  • 22rnd Capacity
  • Translucent polymer construction
  • For Novritsch SSG96 MK1 & MK2

If you need more mags for your Novritsch SSG96, you've found them! The Novritsch 22rnd Magazine for SSG96 Sniper Rifle is constructed from translucent polymer so you can keep track of your round count and is compatible with both the Novritsch SSG96 MK1 and MK2. The mag can be loaded through the feed lips either by hand or with a speed loader and holds 22 BBs; more than enough for such an accurate platform!

£12.99
  • Biodegradable BBs - Great for outdoors
  • 0.28g Weight - Suitable for most AEGs
  • Ideal for upgraded HOP-ups

If you've treated yourself to a Novritsch AEG or GBBR, treat it to some of these! The Novritsch 0.28g BIO BBs are high-grade biodegradable BBs ideal for outdoor skirmishes and platforms with upgraded HOP-up parts. These BBs are supplied in a resealable bag of approximately 2500 BBs, plenty to keep you going!

The extra weight of 0.28g BBs lets them punch through foliage more effectively and resist wind for better accuracy at long range, essential for AEGs with upgraded HOP-up units, including Novritsch platforms! If you need high-grade biodegradable 0.28g BBs, these are some of the best around!

£29.99
  • 29rnd Capacity
  • Green Gas magazine
  • For Novritsch SSP1 and SSP5 pistols

If you're lucky enough to own a Novritsch SSP1 or SSP5 GBB pistol, load up on these! The Novritsch 29rnd Green Gas Magazine for SSP1/SSP5 GBB is constructed from alloy with a polymer baseplate, brass valves and rubber O-rings. Compatible with most Hi-capa 5.1 GBB pistols but made especially for the SSP1 and SSP5 pistols from Novritsch. 

Filling the mag with gas is as simple as sliding the baseplate off and inverting the mag to fill, as you would with other green gas magazines. Loading the BBs can be done through the feed lips with a speed loader equipped with a GBB adapter but you can also pull the follower down and load through the widened section at the bottom. If you want to maximise your kill potential, load up on mags!

£8.99
  • 7.4V 600mAh
  • Mini-Deans connector
  • For Novritsch SSE18 & CYMA MOSFET AEPs

If you're looking for a tiny LiPo battery for your Novritsch SSE18 or CYMA CM.1xxS MOSFET equipped AEP, this is what you need. The Novritsch 7.4V 600mAh LiPo Battery measures approximately 7.3 x 1.5 x 1cm and is pre-wired with a Mini-Deans battery connector and a 3 port balance connector. 

As with other LiPo batteries, this battery should only ever be charged on a LiPo balance charger, preferably in a battery charging bag and should not be left on charge unattended under any circumstance.

£39.99
  • CNC Aluminium construction
  • Reconfigure to multiple different lengths
  • Compatible with 14mm CCW male threads

If you're looking for a suppressor which departs from the norm with a futuristic profile, the Novritsch Rectangular Modular Suppressor V2 is the one. This CNC aluminium suppressor boasts an acoustic foam filling for effective sound dampening and can be reconfigured into 3 different lengths to suit any build objective. 

This version of the Modular Suppressor V2 mounts to either 14mm CCW male threaded outer barrels or 16mm CW threaded outer barrels depending on the variant you choose, meaning an easy fit on most AEG assault rifles and SMGs and a specific variant for MK23 and SSX23 NBBs. Its lightweight nature makes it ideal for GBB pistols with tilting barrels, and we recommend using the shortest configuration for the best possible gas efficiency. Included in the set are a pair of additional bolts, allowing you to use the suppressor at full-length (170mm), mid-length (110mm) and ultra-short (80mm) configurations. If you need a suppressor with a modern look to suit your cutting-edge build, the Novritsch Modular Suppressor V2 is ideal!

£39.99
  • 31rnd Capacity
  • CO2 Magazine - Ideal for cold weather
  • Compatible with Novritsch SSP1 and SSP5

If you want to keep your beast of a Novritsch pistol shooting perfectly in cold weather, you'll need one of these! The Novritsch 31rnd CO2 Magazine for SSP1/SSP5 GBB Pistol is constructed from alloy with a polymer baseplate and is compatible with both the SSP1 and SSP5 GBB pistols.

The mag is loaded either through the feed lips or the follower channel when the follower is held down using a speed loader or loading tool. If you're new to CO2, we recommend giving our CO2 guide a quick read so you can stay abreast of maintenance and CO2-specific safety issues.

This mag uses 12g unthreaded CO2 capsules, one of which needs to be installed inside the magazine shell. To access the CO2 compartment, simply press the small button on the bottom and slide the baseplate off. Underneath, you will find the CO2 plug which can be removed with the included Allen key or a flat tool if you don't have the Allen key handy. Install your CO2 capsule inside, tighten the plug down until you hear the capsule pierce and replace the baseplate; you are now good to go!