Airsoft Rail Covers And Panels

A 12 pack of Rail Covers, designed to provide a non-slip and more comfortable surface to 20mm RIS / RAS Rail.

Flash light cables dangling and snagging your sling? WADSN has got you and your cables covered! This is a rail cover for M-LOK rail system with a textured exterior for that bit of extra friction and grip. But the real use of this rail cover is that it has a number of recesses for which to run cables through, keeping them confined and tidy.

So if you find yourself with loose cables from tactical devices such as battery wiring, pressure switches and other cables, this is what you need to keep them out of the way and minimize snagging.

If you've got wires hanging off your primary getting in the way, the FMA Low-profile Admin Clips for 20mm Picatinny Rail; 60PCS Set will fix that! Designed to do double duty as rail covers and wire admin clips, these nifty little pieces of polymer keep your wires out of the way thanks to a recess cut in the centre allowing your wiring to run through. These mount to 20mm Picatinny rails and all you need to do to install them is clip them on!

The set also includes a number of clips for running your wires at the side of your rail, giving you plenty of options, all of which keep your setup neat and tidy. Creating a textured surface to enhance grip thanks to the slight separation between each clip, the Low-profile Admin Clips can also be used to add traction to handguards of various lengths, avoiding the need to cut conventional rail covers to length. If you want your primary to look more professional, these are the key!

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to Picatinny rail systems, locking with a grub screw on the top. These are much like standard rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to Picatinny rail systems, locking with a grub screw on the top. These are much like standard rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

A set of rail panels which can be cut to size to give you a better grip on your 20mm RIS / RAS Rail set.

Built from lightweight polymer, these rail panels are designed to cover 20mm RIS / RAS rails and offer a more comfortable grip on your RIF.

Built from lightweight polymer, these rail panels are designed to cover 20mm RIS / RAS rails and offer a more comfortable grip on your RIF.

A set of four Ladder Type Rail Covers which are made from a semi-rigid Rubber, and will easily slot over 20mm Rails to provide a more flush aesthetic, and to make the rail much more comfortable to hold. This is the perfect addition to any Rail System that has unused slots which are uncomfortable/unsightly. The Rail Covers are easy to manipulate, and simply need to be stretched over 20mm RIS to fit. They can even be cut to length if you require something more boutique.

A set of four Ladder Type Rail Covers which are made from a semi-rigid Rubber, and will easily slot over 20mm Rails to provide a more flush aesthetic, and to make the rail much more comfortable to hold. This is the perfect addition to any Rail System that has unused slots which are uncomfortable/unsightly. The Rail Covers are easy to manipulate, and simply need to be stretched over 20mm RIS to fit. They can even be cut to length if you require something more boutique.

If you've got wires hanging off your primary getting in the way, the FMA Low-profile Admin Clips for 20mm Picatinny Rail; 60PCS Set will fix that! Designed to do double duty as rail covers and wire admin clips, these nifty little pieces of polymer keep your wires out of the way thanks to a recess cut in the centre allowing your wiring to run through. These mount to 20mm Picatinny rails and all you need to do to install them is clip them on!

The set also includes a number of clips for running your wires at the side of your rail, giving you plenty of options, all of which keep your setup neat and tidy. Creating a textured surface to enhance grip thanks to the slight separation between each clip, the Low-profile Admin Clips can also be used to add traction to handguards of various lengths, avoiding the need to cut conventional rail covers to length. If you want your primary to look more professional, these are the key!

A four pack of Keymod compatible Rail covers, designed to give the user a firmer grip on their Rifle during use. The rail panels are constructed from Rubber and are 15cm in length. 

A set of four Hard-Rubber blanking plates for M-LOK Rail Systems, which will effortlessly push into place and provide a much more comfortable and grippy surface to handle your replica. The panels have a soft-textured surface and are easily installed by pushing them into M-LOK Rail Slots.

If you love the slim feel of your KeyMod handguard, but it is a bit sharp, and a bit cold to grip during winter? G&G have the solution! These KeyMod rail cover panels are constructed from high-density polymer and feature a hexagonal texture on their surfaces to provide enhanced control over your KeyMod handguard in poor weather conditions and help prevent accidental cheese grating action from the KeyMod slots! The covers can be mounted quickly, with no need for tools, and are a great way to add comfort to your KeyMod setup or provide a visible and tactile index point to encourage a consistent grip on the rifle. The set includes 4 cover panels of 10cm in length which can also be cut down to cover smaller KeyMod surfaces if needed. Please note, we cannot accept returns on any rail panels which have been cut down.

Is your AK12 rail scuffed or bent? Need a replacement? No worries. Constructed from lightweight alloy, the cover is easily fit by swapping it out with the original dust cover. With a rail measuring around 7 inches, this cover gives your AK some quality customisation options to which you can attach the sight or scope of your choosing.

Specifically for AK12 models.

A set of ten Rubber rail panels for KeyMod rail systems, which provides a protective and grippy surface to improve handling over the weapon, even when using gloves.

A set of four Rubber-constructed Rail Covers for G&G SR Series KeyMod Handguards. If you own a G&G SR Series AEG and you want a comfortable hand-hold which provides good grip even when wearing gloves, you need a set of Rail Covers. This set is designed for the G&G SR Series; it may fit other KeyMod Handguards but it is designed for and fits best on the G&G Armament SR Series Airsoft Electric Guns. To install to a Handguard, simply push the slots into the desired KeyMod slot and then push the Rail Cover forwards to 'lock' it in place.