All Sniper Rifles

A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping.

A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping.

If you're looking for a sniper rifle with more than its fair share of robust internal components, the Delta Armory M24 R700 Spring Bolt Action Sniper Rifle is a fine choice. Externally based on the real steel M24 sniper rifle hybridized with the R700 sporting rifle, Delta's M24 is designed for mobility, keeping weight to an absolute minimum and trimming off any unnecessary frills which add more weight than their worth.

Inside, we are equipped with a CNC Steel cylinder, CNC aluminium piston, 90-degree sear and CNC steel spring guide, giving you the parts you need to keep the M24 running in the long run and avoiding the usual affordable sniper rifle hurdle of whacking a super strong spring into a platform that isn't ready for it. Though the M24 may use its own unique internal system, the HOP-up rubber is compatible with aftermarket VSR/GBB rubbers so the upgrade fiends can get their fix. If you want to sample sniping but don't want to get in too deep with an expensive primary, the Delta Armory M24 R700 Spring Bolt Action Sniper Rifle is a fantastic option!

If you're looking for a sniper rifle with more than its fair share of robust internal components, the Delta Armory M24 R700 Spring Bolt Action Sniper Rifle is a fine choice. Externally based on the real steel M24 sniper rifle hybridized with the R700 sporting rifle, Delta's M24 is designed for mobility, keeping weight to an absolute minimum and trimming off any unnecessary frills which add more weight than their worth.

Inside, we are equipped with a CNC Steel cylinder, CNC aluminium piston, 90-degree sear and CNC steel spring guide, giving you the parts you need to keep the M24 running in the long run and avoiding the usual affordable sniper rifle hurdle of whacking a super strong spring into a platform that isn't ready for it. Though the M24 may use its own unique internal system, the HOP-up rubber is compatible with aftermarket VSR/GBB rubbers so the upgrade fiends can get their fix. If you want to sample sniping but don't want to get in too deep with an expensive primary, the Delta Armory M24 R700 Spring Bolt Action Sniper Rifle is a fantastic option!

If you've been keeping up with anything Airsoft, you must be excited about this one! The Vorsk VMP-2D is here and this gas blowback DMR rifle is a game changer. Out of Vorsk's new line, this variant is the big boy, the full-fat DMR version. Equipped with a longer M-LOK handguard, extended outer barrel, and marksman stock with an adjustable cheek riser, this is the VMP-2 for long-range specialists. With a locked semi-auto function, this rifle delivers precise shots at up to 450 FPS with 0.2g BBs, making it a powerful choice for any marksman.

The VMP-2 is compatible with standard VMP-1/MP9 magazines and makes use of a unique chassis system with QD sling sockets on each side. It is compatible with M4/AR-15 GBBR pistol grips and features mounts for the prolific M4/AR-15 buffer tube at the rear. The D variant features a fixed marksman-style stock with an adjustable cheek riser which is exactly what you need to get a good view of your target down a rifle scope!

The HOP-up unit has a unique design with an external TDC adjuster, perfect for convenient mid-game setting changes to keep up with the versatile conditions, not to mention being an inherently accurate and precise design. The HOP-up bucking and inner barrel are also VSR-10 spec, giving you almost unlimited options for tuning performance to meet your needs.

Due to the Rubber texture of the body of this gun it can not be 2 toned 

This Spring Powered Bolt Action Rifle is a super lightweight and quiet Airsoft Sniper Rifle that is based on the TM VSR; so much so that it is compatible with all Tokyo Marui VSR upgrades such as PDI and Prometheus brands. The externals of the Rifle feature a Rubberised Polymer which feels very different to your average replica and helps achieve a really realistic and eye-catching finish.

Lee Enfield fans have had a great year...just like busses, you wait forever for a nice Lee Enfield replica and 3 arrive within the space of 6 months! The G&G LE4 MK1-P is G&G's Enfield offering, and differs from the others in its green gas power source, allowing more precise dimensional accuracy and heightened realism when compared to springers.

The G&G Lee Enfield is a truly innovative platform, feeding from 30rnd stripper clip style magazines (we like to call them "clipazines") with its gas tank inside the stock, making it far more skirmish capable than other gas bolt actions, and beating the springers with its smooth and fast bolt action with a realistically sized bolt. When your clipazine runs dry it pops up to allow for a quick reload, and the LE4 comes with 3 clipazines included. If you want the most realistic Enfield skirmish experience, this is the one to go for!

A Spring-Powered Airsoft Sniper Rifle which is based on the L96 platform, outputs a healthy 415FPS and comes included with a magazine and Speedloader.

A Spring-Powered Airsoft Sniper Rifle which is based on the L96 platform, outputs a healthy 415FPS and comes included with a magazine and Speedloader.

If you are looking for a cost effective starting point to try your hand as an Airsoft sniper, or you need an ultra-lightweight counter sniping solution for those moments you find yourself pinned down, the M52 from Double Eagle would fill the role well. This sniper rifle comes out of the box firing around 380 FPS with a smooth bolt pull, enabling faster follow up shots and making this rifle accessible for those with lower physical strength. The M52 is constructed entirely from lightweight ABS polymer and includes an alloy 20mm Picatinny receiver rail and alloy bolt handle to add rigidity where needed.

The Double Eagle M61 Spring Action Sniper is a lightweight and effective Airsoft Sniper Rifle that works by pulling back the Bolt to cock the Spring and feed a BB into the chamber. Unlike most up-market Sniper Rifles, this doesn't require any tinkering out of the box besides setting the Hop Up and using a high quality BB. Firing at ~466FPS w/ 0.2g BBs, you're clear to take it straight out the box and get playing competitively.

If you've got your ear to the ground on the latest Airsoft releases, you can't have missed the LevAR 15" from G&G! This innovative platform is powered by green gas, making use of G&G M4/AR-15 AEG upper receivers providing almost unlimited customisation options and the chance to make this lever action "Space Cowboy" rifle truly yours.

The LevAR 15" is confirmed to be compatible with G&G M4 AEG upper receivers, allowing you to configure it how you want, from a long sniper rifle-style setup to a compact and agile scout rifle perfect for mobile marksmen. Powered by green gas using an internal gas reservoir, the LevAR 15" also boasts a 1913/20mm Picatinny stock interface, meaning the stock can be swapped or removed entirely. Now we have a sample LevAR-15 in our hands, we can confirm that the 1913 interface is set at an angle, so aftermarket 1913 stocks will fit but look funky. We expect G&G will release a range of specific stocks for this interface so stay tuned for more intel!

Our batch of LevAR 15" Gas Powered Lever Action Rifles is due later this year, so sign up for an email stock alert and get in before the rush if you want to be one of the first in the country running this beast. If you need more information before you make the call, check out the full description for all the nitty gritty details!

A high quality Airsoft replica of the Steyr SSG sniper rifle, consisting of a lightweight polymer Stock with alloy bolt, barrel and receiver, complete with an accurately recreated straight pull bolt.

A great rifle for those of you looking to start a sniper loadout or if you are looking to get into Airsoft in general

An excellent long range weapon for both woodland and urban situations. An incredibly fun and tactical piece of equipment, the MK1 combines the comfortable grip of a stocked pistol carbine, with the range and barrel of sniper sniper rifle.

As seen in the immensely popular Battlefield game series, among many more, this is often the go-to rifle for aspiring snipers, with this new upgraded version shooting at a beastly 500FPS, straight out of the box.

Based on the M24 platform, this is spring powered bolt action replica with a full metal build with a lengthy adjustable buttstock. This is a great, budget-friendly Airsoft sniper for those of you looking to start your sniper loadout or if find yourself playing more outdoor skirmishes.

The CYMA CM.099 is a faithful replica of the infamous VSS Vintorez Sniper Rifle, a specialist Russian DMR from the AS VAL family that fires the specially-made 9x39mm. This Airsoft Electric Gun replica ticks all the right boxes for a VSS replica, including a rear-wired Stock which makes battery installation much easier than other VSS models.

Those looking for a more ergonomic alternative to the standard VSR/BAR-10 shape, the SSG10 A2 from Novritsch is what you need. Based on the SSG10 A1 with its full complement of upgraded internal parts, the A2 adds a gorgeous ergonomic chassis styled similarly to the real steel MacMillan A4 stock with some unique Novritsch twists.

All the best parts of the original SSG10 are present in the A2 version, including a plethora of CNC-machined aluminium and steel parts, a 6.01mm tightbore inner barrel and Maple Leaf 60-degree HOP-up rubber, offering near-flawless performance straight out of the box. If you want to get sniping with a highly ergonomic platform which is pre-upgraded to the nines, the SSG10 A2 will be an asset to you!

Those looking for a more ergonomic alternative to the standard VSR/BAR-10 shape, the SSG10 A2 from Novritsch is what you need. Based on the SSG10 A1 with its full complement of upgraded internal parts, the A2 adds a gorgeous ergonomic chassis styled similarly to the real steel MacMillan A4 stock with some unique Novritsch twists.

All the best parts of the original SSG10 are present in the A2 version, including a plethora of CNC-machined aluminium and steel parts, a 6.01mm tightbore inner barrel and Maple Leaf 60-degree HOP-up rubber, offering near-flawless performance straight out of the box. If you want to get sniping with a highly ergonomic platform which is pre-upgraded to the nines, the SSG10 A2 will be an asset to you!

A spring-powered Airsoft Sniper Rifle which is based on the highly successful and widely compatible VSR-10 model. Coming out of the box at 440 FPS w/ 0.2g BBs with a smooth cycling bolt and Real Wood furniture, this is the ideal Sniper Rifle for someone who wants maximum realism and minimal setup / fuss.

If you are after a modern sniper rifle platform with a cutting edge look and upgraded internals straight out of the box, the CYMA CM.708-U should be right up your street! This rifle is the upgraded version of the original CM.708 and boasts a steel cylinder with a low friction coating, a brass cylinder head, an aluminium piston with a rubber shock-absorbing pad and a 90-degree piston catch/sear. 

These components combine to improve the lifespan of the CM.708 and improve its air seal qualities and reduce friction in the action for a higher quality feel and an easier bolt pull. Why not save yourself the trouble of upgrading your sniper rifle and get one with all the trimmings straight from the factory?

If the standard VSR-10 style sniper rifle just doesn't do it for you, perhaps this one will! The Novritsch SSG10 A3 uses the same action and internals as the original SSG10 A1 but replaces the standard rifle stock with the slick and modern Maple Leaf MLC-S2 chassis, complete with a Novritsch branded butt plate.

The MLC-S2 transforms the SSG10 into a highly modular platform with a side folding stock boasting full adjustability, 1913/20mm Picatinny stock interface, M-LOK slots on the sides and a 20mm Picatinny bipod rail at 6 o'clock. This combination of superbly tuned internals from the original Novritsch sniper rifle with the advanced MLC-S2 Chassis makes the SSG10 A3 a likely candidate for the best out-of-the-box sniper rifle for performance-oriented skirmishers!

If sniping is your skirmish role and you want something that isn't an L96 or VSR platform as your primary, the AGM Dragunov SVD will give you the unique rifle you need! This Dragunov SVD replica is a single-shot straight pull bolt action, meaning it falls within the same rules as a standard sniper rifle but with the uniquely iconic look of the bad guy sniper rifle. With full metal on the outside and your choice of high-density polymer or stunning real wood furniture, from a looks standpoint, this SVD ticks all the boxes!

On the inside, we are treated to a 6.02mm tightbore inner barrel measuring a whopping 600mm in overall length, meaning superb accuracy and range potential, if you do your part. The main spring puts out approximately 385 FPS +/- 10% on a 0.2g BB but if you need more, this is easily done thanks to the SVD's compatibility with standard AEG main springs. The HOP-up unit is of the much-lauded TDC design, adjusting via a grub screw with direct pressure applied to the HOP-up rubber for less side-to-side deviation and a stronger overall HOP-up effect. As an affordable way to dip your toes into the world of Airsoft sniping or as the base gun for a beast of a build, the AGM Dragunov SVD is a great choice!

If sniping is your skirmish role and you want something that isn't an L96 or VSR platform as your primary, the AGM Dragunov SVD will give you the unique rifle you need! This Dragunov SVD replica is a single-shot straight pull bolt action, meaning it falls within the same rules as a standard sniper rifle but with the uniquely iconic look of the bad guy sniper rifle. With full metal on the outside and your choice of high-density polymer or stunning real wood furniture, from a looks standpoint, this SVD ticks all the boxes!

On the inside, we are treated to a 6.02mm tightbore inner barrel measuring a whopping 600mm in overall length, meaning superb accuracy and range potential, if you do your part. The main spring puts out approximately 385 FPS +/- 10% on a 0.2g BB but if you need more, this is easily done thanks to the SVD's compatibility with standard AEG main springs. The HOP-up unit is of the much-lauded TDC design, adjusting via a grub screw with direct pressure applied to the HOP-up rubber for less side-to-side deviation and a stronger overall HOP-up effect. As an affordable way to dip your toes into the world of Airsoft sniping or as the base gun for a beast of a build, the AGM Dragunov SVD is a great choice!

If you are fan of historical rifles, or you partake in historical re-enactment, get excited, that's an order! The Lee Enfield Rifle No.1 MK.III has just dropped in Airsoft form! The S&T S.M.L.E is authentically constructed, with a real wood stock and metal wherever there is metal on the real rifle and is indistinguishable from the real thing in all ways but one; this one fires 6mm BBs!

Spare magazines are available here.

In case you haven’t heard, the VMP-2 is VORSKs second long-gun platform designed as a multi-role carbine available in 3 unique variants. This, the VMP-2MD is the “recce rifle” variant, locked to semi-automatic only and tuned to DMR FPS levels. The MD is rocking the same handguard and sliding adjustable stock as the M version with a cheek riser added along with an extended barrel, making it ideal for mobile marksmen playstyles and long-range outdoor warfare!

The VMP-2 is compatible with standard VMP-1/MP9 magazines and makes use of a unique chassis system with QD sling sockets on each side, compatibility with M4/AR-15 GBBR pistol grips and the prolific M4/AR-15 buffer tube at the rear, offering full compatibility with aftermarket AR-15 stocks.

The HOP-up unit is a unique design with an external TDC adjuster, ideal for convenient mid-game setting changes to make the most of changing conditions, not to mention being an inherently accurate design. The HOP-up bucking and inner barrel are also VSR-10 spec, giving you almost unlimited options when it comes to tuning performance to meet your needs.

Our VMP-2 batch has now landed and is ready for immediate dispatch! Those who’ve already made their mind up, get your order in now to make sure you get one of the first VMP-2 platforms available worldwide!

If you're looking for a spring-powered Kar98k that truly stands taller than the rest, you have found it in the S&T Kar98K. The finish on this has to be seen to be believed! It features an authentic-looking and feeling real wood stock and upper handguard, together with well-finished metal components. The metal finish is particularly noteworthy, as it doesn't give off the vibe that this is a replica rifle manufactured in the last few months, unlike so many other historical Airsoft rifle replicas. 

Locked to semi-automatic, this 6mm Airsoft Gas Blowback rifle is a lightweight and highly manoeuvrable platform, designed for use as a scout type weapon. The weapon features dual alloy and polymer construction, with alloy internals, outer barrel and buffer tube, and the grip, Stock and body made from polymer.

Sometimes in Airsoft, you think you've seen it all...and then something like this arrives. Introducing the Storm Airsoft PC1, an Airsoft Sniper rifle which breaks the mould in every single way. Powered by an Electro-Pneumatic internal system which is unlike anything else we have seen in Airsoft, the PC1 requires a LiPo battery to power the internal electromagnetic solenoid, but other than this, there is no spring, no gearbox, no gas...everything runs via air compressed during cocking.

The PC1 is designed and manufactured in France, with the exception of the 6.05mm tightbore inner barrel and HOP-up rubber which are provided by Silverback Airsoft, famed for its successful SRS Bullpup sniper rifle. Just like the SRS, the PC1 boasts an unbeatable barrel length to overall length ratio thanks to its bullpup configuration, making this a very space-efficient sniper platform; perfect for snipers who value mobility.

This, the Deluxe Pack includes a 4-16x44 illuminated riflescope with sunshade, a one-piece spirit level scope mount, a 14mm CCW threaded suppressor made from carbon fibre and a superb quality carry case which fits all these generous extras inside with a neat and professional look. 

With a fully ambidextrous design, ultra-compact and ridiculously lightweight build and performance to rival the very best out there, the PC1 is a radical reinvention of the Airsoft sniper rifle concept and is certain to change the game. If you are ready to jump on board with this cutting-edge piece, as much an engineering marvel as it is an Airsoft sniper rifle, you are in for a real treat!

Sometimes in Airsoft, you think you've seen it all...and then something like this arrives. Introducing the Storm Airsoft PC1, an Airsoft Sniper rifle which breaks the mould in every single way. Powered by an Electro-Pneumatic internal system which is unlike anything else we have seen in Airsoft, the PC1 requires a LiPo battery to power the internal electromagnetic solenoid, but other than this, there is no spring, no gearbox, no gas...everything runs via air compressed during cocking.

The PC1 is designed and manufactured in France, with the exception of the 6.05mm tightbore inner barrel and HOP-up rubber which are provided by Silverback Airsoft, famed for its successful SRS Bullpup sniper rifle. Just like the SRS, the PC1 boasts an unbeatable barrel length to overall length ratio thanks to its bullpup configuration, making this a very space-efficient sniper platform; perfect for snipers who value mobility.

This, the Deluxe Pack includes a 4-16x44 illuminated riflescope with sunshade, a one-piece spirit level scope mount, a 14mm CCW threaded suppressor made from carbon fibre and a superb quality carry case which fits all these generous extras inside with a neat and professional look. 

With a fully ambidextrous design, ultra-compact and ridiculously lightweight build and performance to rival the very best out there, the PC1 is a radical reinvention of the Airsoft sniper rifle concept and is certain to change the game. If you are ready to jump on board with this cutting-edge piece, as much an engineering marvel as it is an Airsoft sniper rifle, you are in for a real treat!

Sometimes in Airsoft, you think you've seen it all...and then something like this arrives. Introducing the Storm Airsoft PC1, an Airsoft Sniper rifle which breaks the mould in every single way. Powered by an Electro-Pneumatic internal system which is unlike anything else we have seen in Airsoft, the PC1 requires a LiPo battery to power the internal electromagnetic solenoid, but other than this, there is no spring, no gearbox, no gas...everything runs via air compressed during cocking.

The PC1 is designed and manufactured in France, with the exception of the 6.05mm tightbore inner barrel and HOP-up rubber which are provided by Silverback Airsoft, famed for its successful SRS Bullpup sniper rifle. Just like the SRS, the PC1 boasts an unbeatable barrel length to overall length ratio thanks to its bullpup configuration, making this a very space-efficient sniper platform; perfect for snipers who value mobility.

This, the Deluxe Pack includes a 4-16x44 illuminated riflescope with sunshade, a one-piece spirit level scope mount, a 14mm CCW threaded suppressor made from carbon fibre and a superb quality carry case which fits all these generous extras inside with a neat and professional look. 

With a fully ambidextrous design, ultra-compact and ridiculously lightweight build and performance to rival the very best out there, the PC1 is a radical reinvention of the Airsoft sniper rifle concept and is certain to change the game. If you are ready to jump on board with this cutting-edge piece, as much an engineering marvel as it is an Airsoft sniper rifle, you are in for a real treat!