Viewing 30 of 53.
grid
list
£29.99
  • 70rnd Capacity
  • 40mm MOSCART Grenade
  • For Airsoft 40mm grenade launchers

If you need an Airsoft area denial tool a MOSCART launcher would be the one to go for. The S&T 70rnd 40mm MOSCART Gas Grenade is compatible with Airsoft 40mm MOSCART grenade launchers and is powered by green gas with a 70 BB capacity. The grenade can be loaded using a speed loader through the apertures on the front and the gas fill valve is also on the front/top of the shell. When filling this grenade we advise that you wear eye protection throughout the process and fill the gas before filling the BBs.

This shell is rather short in overall length, making it easy to carry more grenades and really give the enemy what for. The short overall length is also ideal for pistol grenade launchers and other short 40mm MOSCART launchers as it avoids the rather unrealistic look of the shell poking out of the end of the barrel.

From £359.99
  • Full metal & real wood
  • VSR/GBB type inner barrel/HOP-up rubber
  • A perfect replica of the iconic Mosin-Nagant

If you are into WW2 reenactment and you have your sights set on a Red Army loadout S&T have a real treat for you! The Mosin-Nagant M1891/30 Spring Bolt-Action Rifle Replica is an almost flawless replica of the real M1891/30 Mosin-Nagant which served the Soviet Red Army throughout WW2 and has solidified its place in history thanks to the huge volume of these rifles produced and its fanbase in the US civilian firearms world.

S&T's Mosin replica follows the same format as its superb M1903 Springfield, Lee-Enfield S.M.L..E and Kar98k replicas, boasting a gorgeous antique finish on its metal components and beautiful real wood furniture to make a rifle that would be equally at home in a museum as it would be on the skirmish field. From a performance standpoint, the Mosin-Nagant is no slouch, coming out of the box shooting at 360 FPS with a smooth bolt pull and compatibility with VSR-10/GBB type inner barrels and HOP-up rubbers. If you need a Mosin-Nagant that shoots as good as it looks, this is the one to choose!

£10.99
  • 25rnd Capacity
  • For M1903/K98K
  • Slim / Low Profile

A spare/replacement Magazine for the S&T M1903A3 and KAR98K Rifles, holding a total of 25rnds and being filled using a Speedloader. These lightweight and low profile Magazines are super easy to carry on your person, and will be the difference between holding your position until endex (end of the game), or walking back to the Safe Zone early to reload.

From £159.99
  • High density polymer construction
  • 20mm Picatinny quad railed handguard
  • 14mm CCW Male threaded barrel

Those looking for a lightweight backup weapon with fully fledged special forces style looks you can't do much better than the ST46 from S&T. This AEG is designed to look similar to a popular real world platform we all know and love, and that is widely issued to special forces of almost every nation in some form.

The ST46 is constructed almost entirely from high density polymer, making it a great choice for those with less physical strength or those who are a bit clumsy and may bump, scrape or drop their AEG. High density polymer may be less realistic, but it will not show damage as readily as a full metal gun might thanks to its dyed nature allowing it to maintain its looks far better than a painted or anodised finish.

On the inside the ST46 has an alloy version 2 gearbox with a modern Rotary HOP-up unit, setting it up to be competitive and upgrade-compatible without overcomplicating things by reinventing the wheel. If you need a lightweight solution, either as a primary or a backup, the ST46 is the perfect thing!

£34.99
  • 35 round capacity
  • For S&T Lee Enfield rifle
  • Alloy shell with polymer internals


So, if you have got yourself the Short Magazine Lee Enfield rifle from S&T, you will probably need a few more short magazines to go with it, eh? Introducing the Lee Enfield Rifle No.1 Mk.III S.M.L.E magazine from S&T, an alloy 35 round magazine with a beautiful old-school antique still finish on the outside. This magazine is a spring-loaded design and can be filled either with a speed loader or by hand from the fill port at the front. This magazine is around the length of a 7.62 STANAG magazine and could be carried in 7.62 fabric magazine pouches with a spacer in the bottom for easy access.

£69.99
  • 120rnd Capacity
  • Great value pack of 3 grenades
  • 40mm MOSCART Grenade for Airsoft 40mm grenade launchers

If you need an Airsoft area denial tool a MOSCART launcher would be the one to go for. The S&T 120rnd 40mm MOSCART Gas Grenade; 3 Pack is a great value pack of 3 MOSCART Grenades designed for Airsoft 40mm MOSCART grenade launchers. Each grenade is powered by green gas with a 120 BB capacity and can be loaded using a speed loader through the apertures on the front. The gas fill valve is also on the front/top of the shell. When filling this grenade we advise that you wear eye protection throughout the process and fill the gas before filling the BBs.

When fired in a MOSCART launcher this shell will dispense all 120 BBs in a righteous cloud of fury and has the potential to clear a corridor or bunker in a single shot. If you run a grenade launcher in game and want to make good use of it, this 3 pack of MOSCARTs will see you equipped to shell the *beep* out of the enemy team!

£64.99
  • 70rnd Capacity
  • 40mm MOSCART Grenade for Airsoft 40mm grenade launchers
  • Great value pack of 3 MOSCART shells

If you need an Airsoft area denial tool a MOSCART launcher would be the one to go for. The S&T 70rnd 40mm MOSCART Gas Grenade; 3 Pack is compatible with Airsoft 40mm MOSCART grenade launchers. The shells are powered by green gas with each shell holding 70 BBs. The grenades can be loaded using a speed loader through the apertures on the front and the gas fill valve is also on the front/top of the shell. When filling this grenade we advise that you wear eye protection throughout the process and fill the gas before filling the BBs.

This shell is rather short in overall length, making it easy to carry more grenades and really give the enemy what for. The short overall length is also ideal for pistol grenade launchers and other short 40mm MOSCART launchers as it avoids the rather unrealistic look of the shell poking out of the end of the barrel.

£64.99
  • Polymer structure with nylon covering
  • Velcro-compatible internal fabric with foam padding
  • Includes internal pouch, I.D panel, carry handle and strap

Looking for a rifle case without the chunky and blocky form of a polymer hard case? Sometimes discretion is the best form of security! The Semi Hard Gun Case Version 2 from S&T combines the crush resistance of a polymer case with the discrete looks of a nylon gun bag to provide the best of both worlds, and draw fewer eyes if you take a train to your local site!

This case features velcro compatible internal fabric with removable and reconfigurable retainers for your rifle and high-density foam blocks to ensure the rifle sits snugly and securely inside the case. To aid you in carrying it to the game, the case comes with an integrated dual carry handle, a messenger bag style strap, and a backpack style harness, allowing you to choose the most comfortable carry option for you!

£15.99
  • 35 round capacity
  • Lightweight, but tough polymer
  • Filled using a speed loader

Whether you are gearing up for a WW2 re-enactment or just like some extra rounds for your classic 2 centuries old rifle S&T have got some spare mags for your trusty Nagant. Constructed from lightweight polymer, the mag holds 35 rounds, filled at the front of the mag with a speed loader.

BBs are held in place using a spring that coils round into itself to ensure the maximum amount of round storage in the small area.

£29.99
  • Aluminium construction
  • 20mm Picatinny scope mount
  • Compatible with S&T M1903A3 Springfield

If you have seen Saving Private Ryan and now you want a scoped Springfield rifle, this should get you there! The S&T 20mm Rifle Scope Mount for M1903A3 Springfield is constructed from aluminium and accepts common 20mm Picatinny scope rings, allowing you to fit whatever scope you desire to your Springfield provided the rings can be spaced to fit the mount. The spacing between the two rail sections is 7.5cm approximately, meaning most telescopic sights with separate rings will fit right on with the rings in the right position. 

The mount replaces your rear iron sight and sits over the receiver when installed and requires additional screws (not included) to attach it to the rifle. Please note, this mount will not work with optics which have built-in 20mm rail mounts and is intended for use with optics which use separate scope rings. 

From £139.99
  • Full metal construction
  • 6.03mm Tightbore inner barrel
  • Faux wood ABS stock - Agile & light!

Whether you are looking for a cheap route into historical reenactment or a sniper rifle with more classic styling, the S&T M1903A3 Springfield ABS Stock Version was made with you in mind. This spring-powered bolt action rifle replica boasts full metal construction, VSR-10-based internals and a lightweight faux wood ABS polymer stock, reducing weight and allowing you to use this Springfield as you would a VSR-10; with no guilt about getting it dirty and dinged up.

For those who must have an optic, a scope mount is available, and those who need upgrades will be happy to learn that almost any part you would need to upgrade on the Springfield is compatible with VSR-10 parts. As it comes, we are treated to a 6.03mm tightbore measuring an epic 518mm in overall length, giving the Springfield an accuracy edge straight out of the box. As an alternative to the VSR-10 for a sniper rifle build or shell ejecting rifles for reenactment, the S&T Springfield ABS stock version perfectly marries the classic look with skirmishable practicality!

£199.99
  • 4x Magnification
  • Authentic Finish
  • Multiple mounting options


Not enjoying the barley-corn and tangent sight combo on your Kar98k? Here we have a significant upgrade. The ZF39 scope by S&T doesn't only sport an amazing finish but comes complete with authentically finished mounting apparatus. This even includes a Picatinny rail if you would like to take your Kar98k in a heretical direction. Please, don't...

From £189.99
  • 6.05mm Tightbore inner barrel
  • MOSFET pre-installed - 23RPS ROF
  • Full metal construction - Mostly polymer like the real thing

If you are in the market for a new SMG and you want something that stands out, the S&T UST9 has its own unique look and the performance to back it up! The UST9 is built exactly like the real thing; with a high-density polymer body, metal outer barrel and steel body pins to keep everything firmly together while allowing for quick disassembly. This results in a lightweight and strong platform which does not compromise on realism!

S&T has also added some thoughtful pre-upgraded parts to the UST9 formula; offering a 6.05mm tightbore inner barrel to improve accuracy with less risk of a jam than tighter bores, a pre-installed MOSFET to improve trigger response and rate of fire and a quick change spring system for easy power tuning without needing to open the gearbox shell. If you want an SMG that is realistically built and not an SMG-5 or SMG-7, the UST9 should do the trick!

From £499.99
  • Full metal construction
  • 6.04mm Tightbore inner barrel
  • The biggest rifle on site, guaranteed!

If size matters to you, the ST200 will be right up your street! This absolutely massive Sniper Rifle replica is patterned after the real steel Cheytac M-200 Intervention rifle chambered in the whopping .408 CheyTac cartridge, offering better accuracy and range than even the Barrett M82! This rifle has a special place in all our hearts thanks to its starring role in the movie Shooter(2007), alongside Mark Wahlberg.

The S&T replica is constructed almost entirely from CNC-machined aluminium with the trim parts being steel and the ergonomic "Target" grip made from high density polymer. Amongst the ST200's tricks are the ability to be quickly disassembled, compatibility with AEG standard upgrade springs, inner barrels and HOP-up buckings and rocking an integral Bipod and Monopod, allowing this hefty beast to be supported properly for improved accuracy and stability.

Make no mistake, this rifle is absolutely huge and very, very heavy; tipping the scales at a massive 7KG unloaded and without a scope, and measuring in at 1.4 meters fully deployed. You have to be a special kind of Airsofter to run one of these in a skirmish, but if you have what it takes, here is your chance!

From £499.99
  • Full metal construction
  • 6.04mm Tightbore inner barrel
  • The biggest rifle on site, guaranteed!

If size matters to you, the ST200 will be right up your street! This absolutely massive Sniper Rifle replica is patterned after the real steel Cheytac M-200 Intervention rifle chambered in the whopping .408 CheyTac cartridge, offering better accuracy and range than even the Barrett M82! This rifle has a special place in all our hearts thanks to its starring role in the movie Shooter(2007), alongside Mark Wahlberg.

The S&T replica is constructed almost entirely from CNC-machined aluminium with the trim parts being steel and the ergonomic "Target" grip made from high density polymer. Amongst the ST200's tricks are the ability to be quickly disassembled, compatibility with AEG standard upgrade springs, inner barrels and HOP-up buckings and rocking an integral Bipod and Monopod, allowing this hefty beast to be supported properly for improved accuracy and stability.

Make no mistake, this rifle is absolutely huge and very, very heavy; tipping the scales at a massive 7KG unloaded and without a scope, and measuring in at 1.4 meters fully deployed. You have to be a special kind of Airsofter to run one of these in a skirmish, but if you have what it takes, here is your chance!

From £99.99
  • Full metal construction
  • Single shot - 375 FPS +/- 10%
  • 6.03mm Tightbore & TDC HOP-up unit

If you are fed up with being hassled by snipers beyond your effective range, a compact, high-power shotgun should surprise them! The ST870 Sawn Off from S&T is a near-perfect, 1:1 replica of the real steel M870, one of the most common and iconic pump action shotgun designs of all time. With full metal construction, hefty weight and real wood furniture, if you put this down next to the real thing you would struggle to tell them apart!

Being a single-shot shotgun hitting out at a painful 375 FPS on a 0.2g BB, this ain't going to be welcome on any CQB site. Instead, we envision this single-shot, high-accuracy shotgun as replicating real steel shotguns shooting slugs; solid, high-caliber projectiles intended for long-range engagements and hunting. The compact size of this, the "Sawn Off" version makes it ideal for slinging on the back and carrying as a secondary, giving you more punch at long range than a standard AEG and a useful counter sniping tool.

While it may lack sights, the ST870's fast pump action mechanism and high FPS mean it can be fired far more quickly than a sniper rifle and reach out to equivalent ranges. For the talented skirmisher looking for a new experience, the ST870 Sawn Off offers a fast-firing, compact and consistent platform to handle any long-range threat!

£13.99
  • 100rnd Capacity
  • High density polymer construction
  • For S&T UST9 G3 SMG-9 AEG

If you need magazines for your S&T UST9, you are in luck! The S&T 100rnd Mid-Cap Magazine For UST9 AEG is designed for the UST9 Gen 3 and is constructed from high density polymer with detailed mock cartridges visible through the witness windows on each side, making for a very realistic look.

As with other Airsoft mid-caps, these magazines are loaded through the fill/feed port at the top of the magazine body using a speed loader or loading tool and won't rattle when you run thanks to their spring-loaded mechanism.

£22.94
Was £26.99
Save £4.05
  • M249 Dedicated Bipod
  • Retractable Legs
  • High density polymer build

Tired of resting your handguard on the window ledge while you gun down the enemy? Not to worry, the S&T Bipod is here. 

From £169.99
  • Full metal build
  • Real wood
  • Spring powered

Feel the weight of this absolute classic! With a full metal build and incredibly satisfying pump action, this shotgun features the original full-length build with beautiful faux wood stock and pump.

The shotgun is single shot, firing at roughly 370 FPS, which is incredibly reliable for taking people out on the field at close range or at a distance.

£119.99
  • Stainless steel construction
  • Teflon coated
  • Works with high-power springs

Upgrade your Lee Enfield with a superior cylinder. Tough and durable, the cylinder is specifically for the Lee Enfield S.M.L.E No. 1 MK III, with the cylinder set constructed from stainless steel and Teflon coated, to reduce piston friction. As a result the set can work with high-power springs. 

From £119.99
  • High density polymer construction
  • 6.03mm Tightbore inner barrel
  • Modernised AK-74 - Great for Russian loadouts

If you like your AKs lightweight and modern, the S&T AK-74MN Sports Line AEG should suit your needs. Based on the real steel AK-74MN, the most recent variant of the AK-74, this AEG is constructed primarily from high density polymer with steel and alloy parts to add strength where needed.

Equipped internally with a 6.02mm tightbore inner barrel, alloy slider HOP-up unit, version 3 gearbox with a quick change spring guide and 8mm slide bearing bushings, S&T has treated us to a respectable internal feature set for such an affordable AK. The externals are built using the VFC style, meaning realistic disassembly and compatibility with aftermarket external upgrades for VFC AKs. If you need a featherweight AK replica to maintain your speedy playstyle, the S&T AK-74MN is one to watch!

£14.99
  • 140rnd Capacity
  • Steel construction
  • For S&T 1918 BAR AEGs

If you're rocking a BAR to bring that old-school-cool vibe to your local site, these mags will keep you in the action for longer! The S&T 140rnd Mid-Cap Magazine For M1918 BAR AEG is specifically designed for the S&T 1918 Browning Automatic Rifle (BAR) AEG and is constructed with a steel shell, polymer internals and a steel feed spring. 

Like other Airsoft mid-caps, this BAR mag is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod. Replicating the real BAR magazine, these mags are rather massive. We recommend specific BAR magazine pouches for these beasts, preferably replica WW2 kit!

£13.99
  • Steel shell with polymer internals
  • For the S&T M1918 BAR AEG
  • 160rnd High capacity magazine

If you are rocking the old school WW1 and WW2 support gun, the Browning Automatic Rifle, you are going to need more ammo to keep up with all the "walking fire" you will be doing! This 160rnd High-cap Magazine from S&T is designed for the S&T M1918 BAR AEG rifle and is constructed with a steel shell, polymer internals and a steel feed spring. This magazine is realistic in size, and external design, with reinforcing ribs running down each side of the steel shell and mock feed lips at the top of the magazine, concealing the feed port and the fill window below. This magazine is a wheel wound high-capacity mag, and the winding wheel is located on the base plate. The magazine can be filled using the fill window located at the top of the magazine, inset into the shell.

£8.99
  • Replacement original part
  • Polymer construction
  • Fix up your old Lee Enfield

If your Lee Enfield is out of action, hopefully, this will cure it! The S&T Loading Ramp for SMLE NO.1 MK.III S.M.L.E Bolt Action is constructed from high density polymer with steel screws and is a replacement original part for the S&T S.M.L.E spring bolt action rifle. This is the part that transports the BBs from the magazine into the HOP-up chamber, known as the "Loading Ramp", and is a common part which gets worn down over time. Whether your Enfield needs fixing or not, this is a great part to have in the tool box!

£42.49
Was £49.99
Save £7.50
  • Steel construction
  • 2000rnd Capacity
  • For S&T PPSH 41 AEG

If you are running the old "Papasha" SMG, either because you are a WW2 reenactor or just because you love the way the PPSH looks, having an extra drum magazine available cannot hurt your chances in-game! The S&T 2000rnd drum magazine is constructed from steel and is filled by removing the rear plate of the magazine. This can be done by loosening the knurled nut on the rear of the magazine, at the centre, and rotating the locking tab downwards, after which the rear of the magazine can be lifted free. The BBs should be loaded in the upper section, and the rear plate replaced before winding the magazine up with the winding wheel on the bottom.

From £439.99
  • Historical Classic
  • Steel Construction
  • Special Forces Variant

The Sterling MK5 (L34A1) is a later adaptation of the Sterling Submachine Gun, that was issued to small patrols for covert engagement and ambushes. This Electric-Powered Airsoft Replica of the Gun is constructed from Steel and Real Wood for an incredibly realistic experience, and features an externally-accessible Rotary HOP Unit for excellent lift on your BBs and easy adjustment.

£24.99
  • 110rnd Capacity 
  • Steel construction
  • For S&T Sterling SMG AEGs

If you've treated yourself to the British classic SMG, the S&T Sterling, you'll need mags to keep it doing what it does best. The 110rnd Mid-Cap Magazine for Sterling AEG is compatible with all S&T Sterling AEGs, including the E-11 Blaster custom, and is constructed from steel, just like the real thing. 

As with other Airsoft mid-caps, this mag can be loaded through the fill/feed port on the top of the mag body using a speed loader or loading rod. With no battle rattle to give you away, a flawless steel build for realistic handling and a respectable 110 BB capacity, your S&T Sterling deserves these mags!

From £119.99
  • High density polymer construction
  • 6.05mm Tightbore inner barrel
  • A lightweight and agile AK build

If you are new to skirmishing or are looking for a lightweight backup AEG in AK flavour, check this out! The S&T AK-105 Sports Line AEG is constructed primarily from high density polymer using the VFC construction style, meaning realistic disassembly for the AK realism nuts!

This AK replicates the AK-105, the mid-length AK designed to replace the AKS-74U in service with Russian special forces. Widely regarded as the best looking AK length, the -105 rocks a 12.4-inch outer barrel and side folding AK-74M stock, making it a handy platform for both indoor and outdoor skirmishes.

Inside, we are treated to a quick change spring system and 18:1 ratio steel gears running on 8mm slide bearings for a smooth gearbox sound and reduced friction. The inner barrel is a 6.02mm tightbore example paired with an alloy slider HOP-up unit so you can get the job done at long range. If you're looking for a platform that is light and fast but it has to be an AK, your needs are finally met!

From £129.99
  • High density polymer construction
  • 6.02mm Tightbore inner barrel
  • Polymer faux wood furniture

If you're interested in AKs but the weight of a full metal build puts you off, the S&T AKMN Sports Line AEG should suit your needs. This AKM replica is constructed primarily from high-density polymer with stamped steel and alloy parts, using the VFC construction standard for maximum realism.

The AKMN is the modernised version of the original AK-47, equipped with the Russian AK side rail so you can mount a Russian-style optic or 20mm rail adapter. This AK is one of the most common variants found in conflict zones across the world next to the Chinese Type 56 and is the perfect platform for modern OPFOR, PMC and rebel loadouts.

Internally, this affordable AK is equipped rather well for the price, boasting a 6.02mm tightbore inner barrel, an alloy version 3 gearbox with steel 18:1 ratio gears running on 8mm slide bearing bushings with a quick change spring system for easy power tuning. The HOP-up unit is also constructed from alloy, adding extra strength so it will likely never need replacing. If you fancy an AK as a lightweight backup platform or for a suitably speedy OPFOR loadout, the S&T AKMN is the one to go for!

From £129.99
  • High density polymer construction
  • 6.02mm Tightbore inner barrel
  • Cold War era AK for mechanised/airborne infantry

If you like the Cold War AK aesthetic, you'll love the S&T AKS-74N Sports Line! Patterned after the real steel AKS-74N, the folding stock AK-74 issued to paratroopers and mechanised infantry with a Russian AK side optics rail, the S&T AKS-74N is constructed primarily from high-density polymer with alloy and steel parts, keeping weight low and agility high.

Inside, we are treated to a 6.02mm tightbore inner barrel, quick change spring system and 18:1 steel gears running on 8mm slide bearing bushings, giving you a head start over other cost-effective AEGs when it comes to internals and performance. Whether you are working on a Soviet-Afghan War loadout or you want a lightweight AK for your rebel/OPFOR kit, the S&T AKS-74N will keep you light on your feet and get the job done down range!

About S&T Airsoft

S&T produces various Airsoft AEG rifles and spring-powered replicas to a very high standard. Known for producing less-common historical WW1 and WW2 replicas such as the Kar98k, the PPSH, Grease Gun, Lee Enfield Rifle and more, S&T replicas are equally at home in a museum as they are at a skirmish!

Many S&T Airsoft Guns are constructed in part from real wood with plenty of steel parts, bringing more variety and realism to the Airsoft scene. The great thing about an S&T Lee Enfield or Kar98K replica is that they are usually cheaper than a deactivated rifle and you can still pull the bolt back, adjust the sights and even shoot 6mm BBs. Perfect for reenactors of all stripes!

S&T also produces several types of Airsoft 40mm MOSCART grenade launchers, both weapon-mounted and standalone varieties. To make sure you have something to shoot from your launcher, S&T also offer MOSCART grenade shells in various capacities, styled after the real HEDP M-433 40mm grenade with the option to choose the 70-round or 120-round options. If you are bulk buying MOSCARTs, S&T even offer a 3-pack!

In addition to their high-quality replicas, S&T also manufactures various accessories such as magazines for its more unique replicas and other items of tactical equipment including semi-hard rifle cases so your pride and joy can be transported and stored securely.