WADSN

If you're running a KeyMod-equipped primary and want enhanced wet-weather handling, the WADSN Rail Cover Set for KeyMod Rail Systems fits the bill! Packaged as a set of 5 rail covers made from high-density polymer, each cover has a textured surface to improve gripping qualities and can be cut to whatever length is required for the build at hand. If you're finding your KeyMod handguard a bit slippery in wet weather, these covers will solve that issue!

If you're ready to style up your primary with an elite look, the WADSN PEQ-15 LA5; Red Laser/White Light Version will get you there! Based on the real steel PEQ-15 LA5 laser aiming device, this low-cost alternative from WADSN offers all the functionality you'll need for Airsoft and provides the "Special Forces" look as a bonus.

This version of the WADSN PEQ-15 LA5 operates primarily through the included pressure switch (2.5mm PEQ/DBAL jack), with the activation button on the top of the unit allowing you to scroll between activation modes. Available modes include white light only, red laser only, white light and red laser, and white light stroboscopic. Once you've selected your mode using the activation button, the pressure switch will turn the PEQ on in your chosen mode and turn off again when you let go of the switch.

The set includes a set of realistic PEQ-15 warning stickers and a section of 3M self-adhesive Velcro to mount the included pressure switch and is supplied in a hard polymer storage case with wave foam to keep your PEQ secure when not in use. If you want your primary to look the mutt's nuts, the WADSN PEQ-15 LA5; Red Laser/White Light Version will do just that!

If you're ready to style up your primary with an elite look, the WADSN PEQ-15 LA5; Red Laser/White Light Version will get you there! Based on the real steel PEQ-15 LA5 laser aiming device, this low-cost alternative from WADSN offers all the functionality you'll need for Airsoft and provides the "Special Forces" look as a bonus.

This version of the WADSN PEQ-15 LA5 operates primarily through the included pressure switch (2.5mm PEQ/DBAL jack), with the activation button on the top of the unit allowing you to scroll between activation modes. Available modes include white light only, red laser only, white light and red laser, and white light stroboscopic. Once you've selected your mode using the activation button, the pressure switch will turn the PEQ on in your chosen mode and turn off again when you let go of the switch.

The set includes a set of realistic PEQ-15 warning stickers and a section of 3M self-adhesive Velcro to mount the included pressure switch and is supplied in a hard polymer storage case with wave foam to keep your PEQ secure when not in use. If you want your primary to look the mutt's nuts, the WADSN PEQ-15 LA5; Red Laser/White Light Version will do just that!

If you are after a rifle-optimised tactical flashlight that is both stunningly effective on the field and Milsim appropriate, the WADSN V600 Scout would be a great choice. WADSN's flashlights are steadily growing in popularity thanks to their excellent build quality, stunningly bright CREE LED and previously unheard-of value for money. The V600 is fitted with an integrated 20mm Picatinny rail mount, making it ready to mount, and it comes with the pressure switch tail cap and a pressure switch to provide a momentary-on function, with the option to upgrade the mount or switch with any scout light compatible replacements. A tactical flashlight is a great way to get a spit second advantage when breaching a room, so if you're building a CQB primary you will want one of these!

If you are after a rifle-optimised tactical flashlight that is both stunningly effective on the field and Milsim appropriate, the WADSN V600 Scout would be a great choice. WADSN's flashlights are steadily growing in popularity thanks to their excellent build quality, stunningly bright CREE LED and previously unheard-of value for money. The V600 is fitted with an integrated 20mm Picatinny rail mount, making it ready to mount, and it comes with the pressure switch tail cap and a pressure switch to provide a momentary-on function, with the option to upgrade the mount or switch with any scout light compatible replacements. A tactical flashlight is a great way to get a spit second advantage when breaching a room, so if you're building a CQB primary you will want one of these!

Looking for a tactical flashlight for a short-barrelled Airsoft primary? The WADSN V300 would be a fine choice. WADSN's flashlights are steadily growing in popularity thanks to their excellent build quality, stunningly bright CREE LED and previously unheard-of value for money. The V300 is the shorter model of the SF Scout light and is fitted with an integrated 20mm Picatinny rail mount, making it ready to mount on any rifle with 20mm Picatinny rails with nothing else needed. The set includes the pressure switch tail cap and a pressure switch to provide a momentary-on function, with the option to upgrade the mount or switch with any scout light compatible replacements.

Looking for a tactical flashlight for a short-barrelled Airsoft primary? The WADSN V300 would be a fine choice. WADSN's flashlights are steadily growing in popularity thanks to their excellent build quality, stunningly bright CREE LED and previously unheard-of value for money. The V300 is the shorter model of the SF Scout light and is fitted with an integrated 20mm Picatinny rail mount, making it ready to mount on any rifle with 20mm Picatinny rails with nothing else needed. The set includes the pressure switch tail cap and a pressure switch to provide a momentary-on function, with the option to upgrade the mount or switch with any scout light compatible replacements.

If you have rail space to fill and want the purebred operator look for your primary, a PEQ box is a great way to elevate the look of your rifle. This version of the WADSN PEQ15 LA-5C combines this elite look with full functionality, including a rare feature for an Airsoft PEQ; an infrared laser. This laser is only visible under night vision but can be a serious asset if you are fortunate enough to own NODs! 

In addition to the IR laser, this PEQ unit provides a white light and a red aiming laser which can be activated either using the onboard activation button or the included pressure switch. The WADSN PEQ15 LA-5C requires two CR123a cells, either standard disposable cells or rechargeable cells. 

If you have rail space to fill and want the purebred operator look for your primary, a PEQ box is a great way to elevate the look of your rifle. This version of the WADSN PEQ15 LA-5C combines this elite look with full functionality, including a rare feature for an Airsoft PEQ; an infrared laser. This laser is only visible under night vision but can be a serious asset if you are fortunate enough to own NODs! 

In addition to the IR laser, this PEQ unit provides a white light and a red aiming laser which can be activated either using the onboard activation button or the included pressure switch. The WADSN PEQ15 LA-5C requires two CR123a cells, either standard disposable cells or rechargeable cells. 

If you're on board with the ever-growing trend of mounting tactical flashlights to your pistol, get on board with the WADSN X300 Ultra! This aluminium tactical flashlight is based on the real steel SF X300, a high-end tactical flashlight designed for pistols, short-barreled rifles and SMGs. 

With an integral rail mount, loads of alternative mount options, the highly functional SF rocker switch and a stunningly bright CREE-XPG-R5 L.E.D providing 600 Lumens of sparkly goodness for the eyes of the enemy team, this flashlight is a serious force multiplier!

If you are the type of Airsofter who loves the latest and greatest mission essential equipment you must have been waiting for this moment! The WADSN ET OGL White Light Illuminator/Aiming Laser; Red & IR is a close replica of a well known real steel laser device and is constructed from CNC aluminium with flawless precision. 

The unit contains a 150-lumen white light illuminator, a red visible aiming laser and an infrared (IR) laser which can be used in various combinations and either with the included Crane jack pressure switch or aftermarket dual switches. Mode selection is provided by a rotary dial on the rear, and the unit requires a single CR123A 3V cell (not included) to function. If your mates are all running PEQ-15 and DBAL units and you want to make them jealous, the OGL will do just that!

If you have a pile of leaky mags, now is the time to fix them up! The WADSN Gas Magazine O-ring Repair Set includes 10 O-rings of 7 different sizes, designed to replace the O-rings of the knocker valve and fill valve in most Airsoft gas magazines. The set is supplied in a clear polymer organiser case to keep everything neat and includes a set of polymer installation tweezers to make installation without damaging the O-rings considerably easier. If you have a lot of leaky mags gathering dust, this set is the key to giving them a new lease of life!

If you have a small gun but a big need for illumination, or if you want the latest compact, high speed PEQ style laser unit, the DBAL-A2 from WADSN may be what you have been looking for! With more functions than the space shuttle and a compact lightweight form, you need your excuses ready to not want this on your primary!

WADSN are considered by many to be the gold standard in terms of torches and switches with this modbutton being no exception. The pressure switch is used for remote activation of a flashlight and is constructed from rubber for a tactile feel. The housing attaches easily to a Picatinny rail system, however if you would prefer to attach it to an M-LOK system, WADSN have fortunately included an adaptor, giving you that option.

If you fancy using your pistol as a primary weapon for CQB, a tactical flashlight is a great way to gain an advantage when it comes to clearing rooms and lighting up the enemy in dark areas. The X300 Tactical Pistol Light from WADSN provides a mighty 400 lumens to brighten up the day of the enemy team as you send them back to regen! This flashlight comes with multiple mounting options, including a universal Picatinny and pistol optimised QD mount and a fixed mount for either rail option. 

If you are looking for one of the spiciest pistol flashlights we sell, the XH35 from WADSN is up there with its phenomenal 890 lumens output on high power mode! The XH35 is an enhanced pistol flashlight based on the X300 design but with the ability to switch between low and high output mode, and the solid or stroboscopic modes. The XH35 uses the same rocker switch controls as previous X200/300/400 series lights, so there is no need to retrain if you fancy an upgrade!

If you are in the market for a compact and lightweight flashlight, then look no further! The M300B Scout Light; Single Switch Version is a superb choice for skirmishers who fear what hides in the dark, or more specifically, who may hide in the dark. This flashlight comes in two colour variants so you can match it with your loadout to keep everything looking uniform, very tactical!

The flashlight mounts onto the common Picatinny rail using its 20mm rail mount. This means it can be attached on most standard platforms without the need for rail adapters. Keep your operations illuminated with the WADSN M300B Scout Light; Single Switch Version!

Keep your WADSN flashlights safe from stray BBs with the WADSN Flashlight Protector. This polymer protector will save the glass lens from shattering under the impact of a BB. It comes in multiple sizes that match the diameter of the different WADSN flashlight lines. Each package includes a clear, translucent diffuser and an IR protective lens, so you can use the best protective lens for your play style.

If you like to dazzle foes, the clear lens is certainly for you. If you are a sneaky player instead and like to operate in pitch black, relying on your night vision setup, then the IR protective lens is the one for you. Save yourself the upset of a broken flashlight and increase its situational versatility with a WADSN Flashlight Protector.

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

For CQB, and for low light situations, there is no greater helping hand in the field than a tactical flashlight. The M340A Scout Light Pro from WADSN is the latest variant of their M3xx mini scout light series and comes complete with a low profile, angle adjustable mount for 20mm Picatinny rails, an angle adjustable M-LOK/KeyMod mount, and both the push button tail cap and the pressure switch tail cap. This light reportedly pumps out 540 lumens and literally turns night into day with its dazzling brightness!

If you need to see your way around a dark skirmish site or read a map during a night game without giving away your location, the Sidewinder Stalk Navigation light is the right tool for the job. This light provides soft light so you can navigate without lighting the whole site up and offers you the option of using red, blue, green or white light in 3 different intensity levels, as well as a flash mode for signalling.

Supplied with a mount for ARC rails, velcro and MOLLE, the WADSN Sidewinder can be mounted wherever you like and can be quickly removed and remounted should the need arise. If you are working on a helmet build and need some fancy bits to make it pop, the Sidewinder Stalk Helmet/MOLLE Navigation Light would be the perfect finishing touch!

A flashlight design for use with pistols, the X399YH-B is easily attached to your Picatinny pistol rail for if you want to transform your pistol into more of a spec ops style. The flashlight is features aluminium construction with fantastic and robust durability that will operate in even the harshest conditions.

It features 800 lumens on a low output with a potential for 150m maximum light distance, easily switched on/off using the rear rocker switch. The torch is powered by aftermarket 123A batteries.

A flashlight design for use with pistols, the X399YH-B is easily attached to your Picatinny pistol rail for if you want to transform your pistol into more of a spec ops style. The flashlight is features aluminium construction with fantastic and robust durability that will operate in even the harshest conditions.

It features 800 lumens on a low output with a potential for 150m maximum light distance, easily switched on/off using the rear rocker switch. The torch is powered by aftermarket 123A batteries.

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer. Attached to M-LOK system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories.

The rail is a 20mm Picatinny type, measuring roughly 2.5 inches and is attached to M-LOK system using the included screws, nuts and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer.

Attached to Picatinny system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories.

The rail is a 20mm Picatinny type, measuring roughly 2.25 inches and is attached to Picatinny system using the included screws and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

If you like flashlights and lasers but are short on rail space, the WADSN AXN Double Switch is here to save the day. This dual pressure switch allows you to operate your SF Scout style flashlight and a PEQ/DBAL style laser with a 3.5mm jack through a single switch mounted to either a 20mm Picatinny rail or M-LOK slots. 

Dual switches are a great way to reduce your workload in game and streamline your setup for a more modern and professional look. The AXN type switch has the advantage of being far smaller than its rivals, making it ideal for a setup with limited rail space. Being set at a comfortable angle also reduces fatigue when compared to flat switch designs. If you have a load of shiny things on your primary, the difference a dual switch makes when it comes to ease of use cannot be overstated!

If you are in the market for a compact lightweight but very effective flashlight, then look no further! The WADSN M300C Scout Light; Dual Switch Version is a superb choice for skirmishers who are afraid of the dark, or at least what may lurk in those dark corners. This flashlight comes in two colour variants so you can match it with your loadout to keep everything looking uniform, very tactical!

The flashlight mounts onto the common Picatinny rail using its 20mm rail mount. This means it can be attached on most standard platforms with ease. Keep the future bright and those dark rooms brighter with a WADSN M300C Scout Light; Dual Switch Version!

If you are in the market for a stylish new pistol torch with a red aiming laser you have probably already been browsing X400s, now get ready for the ultimate X400 variant...the "VAMPIRE" edition. The real X400 VAMPIRE offers a rotary bezel offering the choice between visible white light and infrared light, but the WADSN version swaps out the IR function with a blinding strobe function to give you the edge when clearing rooms and keep the enemy confused and disoriented as you rack up kills! The X400V is constructed from aluminium, and requires 2x CR123a batteries to operate (not included).