ASG Airsoft

Produced to an incredibly high quality with the best mil-spec steel rated SiCr. Every spring no matter the rating has gone through a full quality control test by ASG for your peace of mind that you are fitting a reliable spring. 

A Standard powered Airsoft Battery, designed to be used in almost all Airsoft AEG weapons with a mini-Tamiya connector, providing the perfect amount of power for most Airsoft Weapons. 

ASG 20mm pistol/M4/AK/G36 laser sight designed to fit on the under side of pistols or attach to a 20mm accessory rail.

A spare or replacement stock with internal battery space for Airsoft replica M4 / M16s AEGs, or other Airsoft guns with an AEG Spec Buffer Tube. 

A spare or replacement stock with internal battery space for Airsoft replica M4 / M16s AEGs, or other Airsoft guns with an AEG Spec Buffer Tube. 

If you need a pair of skirmishing goggles that will work well with a helmet, these are for you! This affordable pair of goggles come with yellow and smoked lens inserts as well as an adjustable elastic strap. They are ANSI rated Z87.1 meaning they are suitable for skirmishing, target shooting or cosplaying!

They have a rubber seal that goes around your eyes and have ventilation ports to minimise the fogging effect that most Airsoft goggles suffer from. The elastic strap is fully adjustable using the mechanism on the rear meaning that these goggles can be used over or under a helmet.

If you need some goggles for skirmishing and want something affordable which has a great field of view, you can't go wrong with the ASG Strike Systems Goggles EP-01!

A Scope designed for Airsoft Weapons designed to allow the user to place accurate shots at range, and allows you to follow the trajectory of BBs as they are fired. 

A Vertical Foregrip designed to be attached onto the Front Handguard of Rifles and Submachine Guns to give the user a more stable grip on the weapon. 

Constructed by HERA Arms themselves, this foregrip is part of the CQR rifle system but comes as a stand-alone unit and can be attached as an aftermarket part to any rifle with a lower 20mm RIS / RAS Rail. If you just want the ergonomics of the foregrip, but not the stock, then this is for you.

A multipack of magazine for the ASG Scorpion Evo. Built from tough Polymer these magazines are mid-capacity, meaning BBs can be loaded from the top using a speed loader and then require no winding. 

Whether you need a red dot sight for your RMR plate-equipped pistol or a compact backup optic for an offset or piggyback mount, the Micro Red Dot Sight by ASG is a fantastic option! Designed to be mounted onto sidearms using an RMR footprint mount plate or onto rifles via the included 20mm Picatinny mount, this affordable yet effective red dot sight is windage and elevation adjustable with 2 brightness settings for different ambient lighting conditions. 

The Micro Red Dot Sight is powered by a single CR1632 button cell (not included) which is inserted through the underside of the optic. Windage and elevation adjustments are applied using a flat-head screwdriver, with the windage dial on the right side of the sight and the elevation dial on the top. On the left side, we can find the on/off switch which also lets you set the brightness of the red dot reticle. If you're looking for an affordable and compact red dot sight to finish off your build, the ASG Micro Red Dot Sight is the way to go!

A Multifunction LED flashlight with 3 modes of operation, full power, low power or strobe effect. Can be mounted on most Airsoft guns with 20mm Picatinny rails. The flashlight is powered by 3x AAA batteries (not included) and comes with an integrated 20mm rail mount, a mount for the handlebars of a bike and a belt mount. 

A replacement magazine for the Scorpion Evo series that holds far more rounds than the standard mag is perfect for the operator who love to suppress the enemy or run lightweight with minimal magazines. 

A Pair of Modular 20mm RIS accessory rails designed to be fitted on to AR36 Style Handguards allowing the attachment of aftermarket parts and accessories. 

A great rifle for those of you looking to start a sniper loadout or if you are looking to get into Airsoft in general

An excellent long range weapon for both woodland and urban situations. An incredibly fun and tactical piece of equipment, the MK1 combines the comfortable grip of a stocked pistol carbine, with the range and barrel of sniper sniper rifle.

A Gas Blowback Airsoft 6mm BB Pistol, which has been designed and created based off the CZ P-09 Duty and fully licensed by CZ from Czech Republic. The Pistol externally is constructed almost entirely from Polymer, with a Polymer Slide and Frame, but features Alloy Sights and Internals.

A 1x red dot sight, providing a red dot for aiming. This sight provides a red dot sight with no magnification which provides quick target aquisition whilst in the field, allowing for two eye open targeting. 

A replacement front and rear ironsight set for with 20mm RIS / RAS rails, allowing you to fit the low profile sights to almost any Airsoft Rifle. 

If you're looking for an AR-15 with a unique look, you've found it! Built in partnership between ActionSportGames, ICS and HERA ARMS this rifle is an Airsoft gun like no other. Based on the AR-15 Mil-spec variant of the HERA ARMS CQR this rifle uses ICS's brand new SSS AEG Gearbox design and is officially licensed and fully trademarked.

The Airsoft replica itself is constructed from a mixture of high quality alloys and polymers, with an Alloy Receiver, Handguard Outer Barrel and Internals, with a Polymer Stock, Magazine, Foregrip and Flip-up Iron Sights. The rifle features a high quality finish, with heavy duty materials leading to a highly detailed and realistic looking rifle. The rifle isn't just a quality build, it also come fully trademarked with all the textual markings and logo shown on the real rifle for higher levels of realism.

A carry case designed specifically for the Scorpion Evo, and offering players the ability to carry both their Airsoft gun and everything you need for a skirmish pretty much within something the size of a suit case. 

If you're into sleek, modern Hi-Capas with the mighty recoil of a CO2 power source, the ASG STI Combat Master is a fine choice! Wielded on the big screen by everyone's favourite puppy-avenging hero, the Combat Master boasts full metal construction and a mission-ready featureset, rocking a flared magwell for easy reloads, a 20mm Picatinny frame rail for your flashlight or aiming laser and light-enhancing iron sights for intiuitive low-light shooting.

If you have a damaged wire, snapped motor connector or just want to improve your electric conductivity then this pack is ideal.

A Two Point Sling which as been designed specifically for use with ASG's Scorpion Evo Airsoft Submachine Gun. 

Locked to semi-automatic, this 6mm Airsoft Gas Blowback rifle is a lightweight and highly manoeuvrable platform, designed for use as a scout type weapon. The weapon features dual alloy and polymer construction, with alloy internals, outer barrel and buffer tube, and the grip, Stock and body made from polymer.

A high quality very compact Airsoft Red Dot Sight that is suitable to fit any Airsoft 20mm RIS/RAS rail section. Ideal for pistols, compact SMG and low profile rail systems. 

This mini Airsoft Red Dot Sight also comes with a protective Polymer casing that is excellent when storing and transporting your AEG or Optic if you keep it separate from your Airsoft Gun. Windage and Elevation is also easily adjustable for sighting in your Airsoft gun any time of the day.

Spare Magazines for your awesome Steyr Scout sniper rifle! 32 Round capacity, it can be filled with a speedloader or the fill adaptor included with the Steyr Scout. Polymer construction.

An incredibly unique and simple Airsoft pistol, this almost silent non-blowback handgun is the ultimate sneaky Airsoft sidearm. Based on the MK2 Ruger and featuring an alloy exterior, this is excellent for garden shooting and as a long range DMR pistol.

A one point sling designed for MP9 gas blowback submachine guns, with a quick release clasp for easy handover to a marshal or other player.

A hard plastic case designed to hold ASG's Dan Wesson Revolver. The case is constructed from Polymer and features laser cut foam inside specifically shaped to the pistol for an extra snug fit.

A semi transparent magazine coupler allowing you to connect your ASG CZ Scorpion Evo magazines together for faster reloading.