Airsoft Sights and Scopes

A classic front sight design that has been around for quite some time in the Airsoft world, this sight is usually found on KAC style replicas such as the KAC PDW, SR-25, and SR-15, but is perfectly suitable for a civilian tactical M4 build or an MK12 SPR build. The sight mounts to a 20mm Picatinny rail and is adjustable for elevation by raising and lowering the steel front blade/post using an M4/AR15 front sight adjustment tool. This sight is very sturdy and well built, making it perfect for anyone who has had bad luck with polymer sights. The sight was intended to be equally effective in use as a primary aiming device as it is as a backup sight for your optic. This sight is incredibly low profile when folded, and is perfect for setups with a big scope that would prevent bulkier flip-up sights from mounting. 

A replacement front and rear ironsight set for with 20mm RIS / RAS rails, allowing you to fit the low profile sights to almost any Airsoft Rifle. 

A set of Alloy constructed Folding / Flip Up Ironsights for 20mm RIS / RAS rails, available in either Bronze or Black with Silver Trim. Both the Front and Rear Sight Post are adjustable to account for Windage and Elevation, without the use of tools. Whether you run a primary optic or you want to depend on these ironsights alone, they will be the perfect finishing touches to any loadout you're currently building.

The Victoptics 1x35 RD Scope is a Red Dot Sight for Airsoft Guns, attached via the integrated 20mm RIS/RAS Mount. The Sight features a 5MOA Target Dot, meaning it will cover 5" of space at 100 yards. The Aim Point can be adjusted for Windage and Elevation, using a Flat Head Screwdriver, ensuring you can align your BBs with the Target Dot.

An Airsoft Sight created by THETA OPTICS which features a red-dot system where a small red dot is projected into the vision of the user while they are looking down the sight. Red dot sights are designed to allow you to aim quicker as once the red dot is zeroed it will always bee on point whatever angle you are looking at the sight through, and also allows you to shoot with both eyes open for a better field of view.

This sight is perfect for those skirmishers who are getting into Airsoft and are looking for a sight which has a great clear sight picture at a low price. The sights' dot is very clear, and is extremely well priced for the quality.

A tough and affordable Red Dot Sight for Airsoft Guns that have a 20mm RIS/RAS Accessory Rail. Powered by a CR2032 Battery (included) this Sight offers a Red or Green Target Dot with five brightness levels, and is ready to install onto a Picatinny Rail via the integrated Rail Mount. If you're looking for the finishing touch to your Airsoft Gun and want to improve your target reaction times, then the Theta Optics Red Dot 1x40 Reflex Sight Replica is the perfect way to get started on the ladder of optics.

The Theta Optics Luneta 4x32mm Scope is perfect for those seeking the line between a high quality optic and a reasonable price. This Riflescope has a fixed 4x Magnification which is perfect for Airsoft, and an Objective Lens of 32mm. It comes included with a set of 20mm RIS/RAS Scope Rings, so that you can install the Scope to 20mm Picatinny. The Scope has a Mil-Dot Crosshair, allowing you to make last minute adjustments to your shots using the markers in the Scope.

If you are looking for a BIG OL' red dot sight, the 1x40 Red/Green Dot Sight from PCS is about as big as is practical for mounting on a man-portable rifle! This sight has a massive 40mm objective lens, meaning plenty of light makes it through for an ultra-clear view of the target. The "dot" reticle offers selectable colours, allowing you to choose between red or green for the best fit for your environment, and also offers 5 brightness settings for each colour making this sight suitable for practically any ambient lighting conditions. Large red dot sights like this are great for newer players and more casual skirmishers, as they are far more forgiving of having an inconsistent head position than smaller red dot sights, with a larger "eye box" which can be used effectively regardless of skill or experience level. 

If you like keeping your skills sharp rather than leaning on modern technology this front iron sight should suit your style! The Classic Army Solid Front Iron Sight is designed to fit 20mm Picatinny rails and is set up for M4/AR-15 bore offset, meaning it will align with most M4/AR-15 rear sights, carry handle rear sights and flip-up sights.

The sight body is constructed from alloy and the front sight post is steel and is adjustable for elevation using an M4/AR-15 front sight adjustment tool. Whether you are going for an old-school build or you just want the reliability of a sighting system which requires no power and is always there when you need it this front iron sight should do the trick!

A Scope designed for Airsoft Weapons designed to allow the user to place accurate shots at range, and allows you to follow the trajectory of BBs as they are fired. 

If you need a set of backup iron sights to finish off your build, CYMA has something that might interest you! The CYMA Polymer Flip-up Iron Sight Set for 20mm Picatinny rails offer tool-less adjustment, ambidextrous flip-up buttons and compatibility with 20mm Picatinny rails, meaning they fit on any Airsoft rifle with 20mm rails, which these days is most of them!

The sights offer two rear apertures to aim with, a smaller one for semi-automatic fire and long-range use and a wider one which is well suited to full auto fire and low light conditions. The sights can be deployed by pressing the textured section at the front of each sight from either side, after which they can be manually raised into position. Adjustments can be applied via the dial on the right side of the rear sight, which will move the aperture from side to side, and in the centre of the front sight post which will raise and lower it for elevation adjustments.

While few people actually use their BUIS in-game other than in emergencies, a set of backup iron sights are one of those small details which really help finish off a realistic build. Give your primary a professional look with the added confidence that you can still aim, even if left your red dot sight turned on since the last game!

A red and green dot sight designed to be attached to the top of Airsoft Guns and Weapons to allow for quicker target aquisition than traditional Iron Sights. 

An Airsoft Red dot sight created by THETA OPTICS which is designed to be fit onto 20mm RIS / RAS Rails to make aiming your rifle or pistol easier and quicker. The sight projects a red dot using a laser on to the front glass lens which once zeroed will be where the pistol will shoot no matter the angle at which you can see the dot, this allows you to acquire targets quicker and more efficiently giving you an edge in an Airsoft game.

This sight is perfect for any Airsoft Skirmisher who is looking for a cheap but extremely effective red dot sight which won't break the bank without a loss in quality of picture.

An Airsoft Red dot sight created by THETA OPTICS which is designed to be fit onto 20mm RIS / RAS Rails to make aiming your rifle or pistol easier and quicker. The sight projects a red dot using a laser on to the front glass lens which once zeroed will be where the pistol will shoot no matter the angle at which you can see the dot, this allows you to acquire targets quicker and more efficiently giving you an edge in an Airsoft game.

This sight is perfect for any Airsoft Skirmisher who is looking for a cheap but extremely effective red dot sight which won't break the bank without a loss in quality of picture.

An Airsoft Red dot sight created by THETA OPTICS which is designed to be fit onto 20mm RIS / RAS Rails to make aiming your gun easier or quicker. The sight projects a red dot using a laser on to the front glass lens which once zeroed will be where the pistol will shoot no matter the angle at which you can see the dot, this allows you to acquire targets quicker and more efficiently giving you an edge in an Airsoft game.

This sight is perfect for any Airsoft Skirmisher who is looking for a red dot sight which has a low profile on their replica, or for those with ultra compact CQB weapons are looking for a lightweight sight which won't overpower their weapon.

An Airsoft Dot Sight created by THETA OPTICS, designed to be fit onto 20mm RIS / RAS Rails, and allows the user to acquire their targets quicker and more easily over traditional ironsights. This sight has the added boon of being raised, meaning that the sight is easier to use for Airsoft players who wear full face protection or lower mesh face masks, lifting the sight high enough to allow you to cheek weld even when wearing a mask.

The sight is fully adjustable, allowing windage and elevation to be set, as well as brightness and dot colour, with up to 5 brightness settings for both green and red dot modes.

This sight is perfect for any Airsoft skirmisher who is looking for a great quality red dot for their Airsoft replica without breaking the bank. The sight is great for outdoors thanks to its high brightness settings, and can be used in CQB easily by simply dropping the brightness levels to 1-2.

An Airsoft Dot Sight created by THETA OPTICS, designed to be fit onto 20mm RIS / RAS Rails, and allows the user to acquire their targets quicker and more easily over traditional ironsights. This sight has the added boon of being raised, meaning that the sight is easier to use for Airsoft players who wear full face protection or lower mesh face masks, lifting the sight high enough to allow you to cheek weld even when wearing a mask.

The sight is fully adjustable, allowing windage and elevation to be set, as well as brightness and dot colour, with up to 5 brightness settings for both green and red dot modes.

This sight is perfect for any Airsoft skirmisher who is looking for a great quality red dot for their Airsoft replica without breaking the bank. The sight is great for outdoors thanks to its high brightness settings, and can be used in CQB easily by simply dropping the brightness levels to 1-2.

A compact Red Dot Sight for Airsoft Guns with a 20mm RIS/RAS Rail System, that has a Mirrored Silver Lens and offers Variable Dot Brightness and Colour, to improve your target acquisition and time-to-target.

The Theta Optics Luneta series of riflescopes are basic but effective non-illuminated scopes with the highly functional "Mildot" reticle, providing index marks on both the horizontal and vertical planes of the scope's crosshair to allow on the fly estimations of range and windage, as well as allowing moving targets to be engaged more easily. The scope is adjustable between 3x and 9x magnification, covering the entire spectrum of usefulness for Airsoft skirmishes, and comes with 25mm/1-inch scope rings for 20mm Picatinny rail.

This rather large Red Dot Sight from Theta Optics offers a large sight picture for easy target acquisition, multiple choices of reticule, integrated rail mount and 3 x short 20mm RIS sections for the connection of extra accessories.

This Red Dot Sight is an instantly recognisable shape that looks great on any Airsoft Gun, and will give you the ability to quickly and efficiently acquire a target and send some well-aimed shots.

This Red Dot Sight is an instantly recognisable shape that looks great on any Airsoft Gun, and will give you the ability to quickly and efficiently acquire a target and send some well-aimed shots.

This Red Dot Sight is an instantly recognisable shape that looks great on any Airsoft Gun, and will give you the ability to quickly and efficiently acquire a target and send some well-aimed shots.

If you are after a large rifle scope for your DMR or Snipers rifle, take a look at the Luneta 3-9x40 EG scope from Theta Optics! Fully adjustable and featuring a crisp Mil-dot reticle which can be illuminated red, green or blue with varying levels of brightness, the Luneta 3-9x40 is perfectly suited to long range precision.

The Theta Optics Monolith Red Dot Sight is exactly what it says on the tin. A chunky and well constructed Red Dot Sight with an integrated 20mm Rail Mount, Flip Up Lens Covers and a Top 20mm Rail for further accessories.

The Theta Optics Operator Reflex Sight is an Alloy constructed Red Dot Sight for Airsoft Guns with a 20mm RIS Rail, and offers a Red/Green Target Dot for precise, aimed shots, as well as Flip Up Lens Covers for badass looks as well as protection when not in use.

This is an Aluminium-constructed Red Dot Sight for Airsoft Guns, that is attached to 20mm RIS/RAS via the Integrated Mount. If you want a more effective aim-point for your replica, that is ready to go out of the box, then the Theta Optics Red Dot Reflex Sight is a strong choice.

An Airsoft Red dot sight created by THETA OPTICS which is designed to be quickly and easily fit onto 20mm RIS / RAS Rails to make aiming your rifle or pistol easier and quicker. The sight projects a sight picture / reticule on to the front glass lens which once zeroed will be where the weapon will shoot no matter the angle at which you can see the picture, this allows you to acquire targets quicker and more efficiently giving you an edge in an Airsoft game. 

The sight picture can be adjusted to one of four types, including a dot, circle, and two cross types, and can be adjusted to show in either red or green.

This sight is perfect for any Airsoft Skirmisher who is looking to improve their CQB game-play by allowing them to acquire targets faster and easier than their opponents on iron sights.

This compact Airsoft Scope offers a variable zoom from 2.5x to 10x, allowing you to make engagements at a variety of distances, thanks to easily being able to set the preferred level of zoom.

If you need a long range aiming solution to compliment your red dot sight, a flip-to-side magnifier will do the trick! The Theta Optics 3x35 Flip-to-Side Magnifier w/QD Mount is designed to mount behind your red dot sight and magnify the image and reticle by a factor of 3, giving you a better view of long range targets and the option to quickly switch between magnified and unmagnified aiming quickly when the enemy closes ground.

The magnifier is constructed from aluminium with an alloy 20mm Picatinny mount which also allows you to quickly remove the magnifier while the mount stays in place. This means that if you are clearing a building you can choose between leaving the magnifier on your gun, flipped to the side and ready to use quickly, or remove it entirely to save some weight for faster target-to-target transitions. If you want a better view of your target but don't want the excessive weight which comes with a full-sized riflescope, a red dot and magnifier combo is a great middle ground between the MK1 eyeball and longer, heavier optics!