PTS Syndicate Airsoft

If you are the type of player who uses a full loadout of midcaps, and you want to reload and get ready for the next game in just a few seconds, we have a treat for you! Introducing the M12 Sidewinder Speed Loader from PTS Syndicate, an ultra quick crank wound speed loader which can load a midcap in an astonishing 4 seconds of winding! This speed loader has a whopping 1600 round capacity, and is widely known for its reliability.

If you are looking for M4/AR-15 AEG magazines that are a cut above the rest, the PTS Syndicate 150rnd EPM Gen.2 Enhanced Polymer Magazine is the one to go for! This is the Gen.2 version of the EPM, building on the superb design of the original by adding improved gripping texture on the exterior, compatibility with Magpul MAGLINK® magazine couplers and a new, more rigid Zytel polymer baseplate.

Like the usual mid-cap magazine, the EPM Gen.2 is loaded through the fill/feed port at the top using an Airsoft speed loader or loading rod/tool and has no battle rattle whatsoever, making it great for milsim inclined skirmishers and those who prioritise stealth when skirmishing. All of the enhancements from the original EPM design have been retained, including the magazine well guides at the top of the shell which eliminate wobble, the witness window showcasing mock cartridges with a clear section to confirm the mag is fully loaded and the high visibility orange follower so you can confirm when your mag is empty.

With a wide range of compatibility, a high-strength compression spring and Dupont Zytel polymer construction, you would be hard pressed to find a better magazine for M4/AR-15 AEG compatible platforms!

If you are looking for M4/AR-15 AEG magazines that are a cut above the rest, the PTS Syndicate 150rnd EPM Gen.2 Enhanced Polymer Magazine is the one to go for! This is the Gen.2 version of the EPM, building on the superb design of the original by adding improved gripping texture on the exterior, compatibility with Magpul MAGLINK® magazine couplers and a new, more rigid Zytel polymer baseplate.

Like the usual mid-cap magazine, the EPM Gen.2 is loaded through the fill/feed port at the top using an Airsoft speed loader or loading rod/tool and has no battle rattle whatsoever, making it great for milsim inclined skirmishers and those who prioritise stealth when skirmishing. All of the enhancements from the original EPM design have been retained, including the magazine well guides at the top of the shell which eliminate wobble, the witness window showcasing mock cartridges with a clear section to confirm the mag is fully loaded and the high visibility orange follower so you can confirm when your mag is empty.

With a wide range of compatibility, a high-strength compression spring and Dupont Zytel polymer construction, you would be hard pressed to find a better magazine for M4/AR-15 AEG compatible platforms!

The latest edition of the world's best Airsoft Magazine! Built for ultimate performance and durability, the EPM1RX Magazine from PTS Syndicate holds a massive 250 rnds in a Spring-Fed Mid-Cap design. This means you get the superb feeding performance of a Mid-Cap, but with a generous capacity that rivals most High-Cap Magazines!

The latest revision of this magazine includes brand new tooling for the internal shell, which leads to more precise dimensions and a smoother BB channel. Perfection just got even better! If you want only the best of the best for your favourite M4 AEG, HPA adapter or Maximus kit, you need to treat it to some PTS Syndicate EPM1-RX 250rnd Magazines.

The PTS Enhanced Rail Section for M-LOK is an Airsoft modular rail panel designed to be fit onto M-LOK hand guards, providing a 20mm RIS / RAS rail for mounting Picatinny accessories such as torches, lasers, grips and many other aftermarket attachments. The rail is available in several different lengths depending on what you require. This rail has a sleek look, owing to the weight-reducing corner cuts, keeping your M-LOK rail looking slick!

This rail is the perfect purchase for any Airsoft player who has got their hands on a new rifle with an M-LOK attachment system and is looking to take their gun to the next level by attaching parts and accessories.

The PTS Enhanced Rail Section for M-LOK is an Airsoft modular rail panel designed to be fit onto M-LOK hand guards, providing a 20mm RIS / RAS rail for mounting Picatinny accessories such as torches, lasers, grips and many other aftermarket attachments. The rail is available in several different lengths depending on what you require. This rail has a sleek look, owing to the weight-reducing corner cuts, keeping your M-LOK rail looking slick!

This rail is the perfect purchase for any Airsoft player who has got their hands on a new rifle with an M-LOK attachment system and is looking to take their gun to the next level by attaching parts and accessories.

The PTS Enhanced Rail Section for M-LOK is an Airsoft modular rail panel designed to be fit onto M-LOK hand guards, providing a 20mm RIS / RAS rail for mounting Picatinny accessories such as torches, lasers, grips and many other aftermarket attachments. The rail is available in several different lengths depending on what you require. This rail has a sleek look, owing to the weight-reducing corner cuts, keeping your M-LOK rail looking slick!

This rail is the perfect purchase for any Airsoft player who has got their hands on a new rifle with an M-LOK attachment system and is looking to take their gun to the next level by attaching parts and accessories.

The PTS Enhanced Rail Section for M-LOK is an Airsoft modular rail panel designed to be fit onto M-LOK hand guards, providing a 20mm RIS / RAS rail for mounting Picatinny accessories such as torches, lasers, grips and many other aftermarket attachments. The rail is available in several different lengths depending on what you require. This rail has a sleek look, owing to the weight-reducing corner cuts, keeping your M-LOK rail looking slick!

This rail is the perfect purchase for any Airsoft player who has got their hands on a new rifle with an M-LOK attachment system and is looking to take their gun to the next level by attaching parts and accessories.

The MTEK Flux Helmet is a replica of a real-world product which serves to become the be-all and end-all of Helmet Systems, offering true modularity in a lightweight and highly developed Airsoft Helmet which has every base covered.

The MTEK Flux Helmet is a replica of a real-world product which serves to become the be-all and end-all of Helmet Systems, offering true modularity in a lightweight and highly developed Airsoft Helmet which has every base covered.

The MTEK Flux Helmet is a replica of a real-world product which serves to become the be-all and end-all of Helmet Systems, offering true modularity in a lightweight and highly developed Airsoft Helmet which has every base covered.

The all-new Dead Air suppressor range from PTS is here! An excellent suppressor with a true baffle system to give actual sound dampening to your platform. the new Dead Air is perfect for the Airsofter who's after adding that little bit of "designer touch" to their setup.

If you have an AK with an incredible rate of fire, you will need some enhanced magazines to keep up! Introducing the TPM-AK, the latest enhanced magazine from PTS Syndicate, the number 1 name in high performance Airsoft magazines. The TPM-AK is compatible with practically any AK AEG but is styled after 5.56mm AK magazines available on the civilian market in the US. This magazine is a spring fed mid-cap and can be loaded using a speedloader through the fill/feed port on the top of the mag.

Another excellent quality product from PTS, a 170rd Mid Cap magazine for those of you looking for a more low profile but reliable magazine option.

Another excellent quality product from PTS, a 170rd Mid Cap magazine for those of you looking for a more low profile but reliable magazine option.

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you're running a big-boy AR and need high-quality magazines, the PTS EPM-LR 150rnd Mid-cap Magazine for SR-25/AR-10 AEG is essential! Made from super-strong DuPont Zytel high density polymer, the EPM-LR brings the high-end PTS pedigree to SR-25 and AR-10 style DMR platforms, offering 150 BB capacity loaded through the fill/feed window.

On each side, we are treated to PTS dot texture, enhancing wet weather handling as it does in the other superb magazines from the PTS EPM range. On the bottom, we're equipped with a "Mag-pod" style baseplate, allowing you to use the EPM-LR as a makeshift shooting rest for more stable long-range shots. Also on the baseplate is a "Dot Matrix", designed to allow you to mark your magazines for I.D purposes numerically.

Compatibility-wise, the EPM-LR is designed for Classic Army pattern SR-25 AEGs and should work in CYMA, E&C, G&P and A&K SR-25 replicas, but won't work in G&G or Ares/Secutor replicas. If you're running an upgraded SR-25/AR-10 replica, the PTS Syndicate EPM-LR 150rnd Mid-cap Magazine for SR-25/AR-10 AEG is the best way to feed it!

If you're looking for a modern stock design with plenty of room for a massive battery, the PTS Syndicate EPS-2 M4/AR-15 Stock has your name on it! Made from ultra-strong DuPont Zytel high-density polymer with steel QD sling sockets on each side and a grippy rubber butt plate, the EPS-2 builds on the original EPS design with a more modern aesthetic and reduced overall length, keeping the rock-solid build quality which put PTS on the map.  

The adjustment lever is a low-profile split design with a fixed central ridge, reducing the chances of accidental activation to practically nil. The shape of the stock itself is designed to reduce snag potential, with smooth edges and practically nowhere for your sling to catch and slow you down. To access the internal battery compartment, press the two tabs at the toe of the stock in, then lift the butt plate free. 

Compatibility-wise, the EPS-2 should fit most Airsoft M4/AR-15 buffer tubes, both AEG and GBBR versions. If you're styling up your AR and want more battery space as a bonus, the PTS EPS-2 M4/AR-15 Stock belongs on your build!

If you're looking for an M-LOK QD sling socket which is ergonomically designed and won't contort your sling, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice. Designed as an alternative to built-in QD sling sockets and standard flat sockets, when installed, this socket faces the shooter, resulting in a more comfortable sling position and less chance of tangles.

Constructed from high-density polymer with a steel QD cup, this socket should be compatible with most QD sling swivels on the market, allowing you to install or disconnect your sling quickly. Due to differences in tolerance between manufacturers, we suggest thoroughly testing this socket before entrusting it with any weight unless you're using it with a PTS-branded QD swivel. If you find the built-in QD sockets on your handguard are positioned suboptimally or don't have any QD sockets on your M-LOK handguard, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice!

A Pistol Grip designed by PTS Syndicate for Airsoft M4/15/16 Replicas which follows the same design traits as Magpul Real Steel Accessories and attachments: Ergonomic, Lightweight, Durable and absolutely always tactical.

A Pistol Grip designed by PTS Syndicate for Airsoft M4/15/16 Replicas which follows the same design traits as Magpul Real Steel Accessories and attachments: Ergonomic, Lightweight, Durable and absolutely always tactical.

If you're looking for a rail riser for a clearer view down your optic, the PTS Syndicate Unity Tactical FAST 20mm Picatinny Optic Riser; Polymer Version should suit your needs perfectly. This riser is based on the real steel Unity Tactical FAST riser, designed to provide a more natural neck position for improved comfort and faster target acquisition, especially for full-face mask and respirator users. 

Being constructed from high-density polymer makes this version of the PTS Unity Riser around half the price of the original aluminium version while offering the same performance as it pertains to Airsoft. If you're seeking a riser and want something a little more tacticool, the PTS Syndicate Unity Tactical FAST 20mm Picatinny Optic Riser; Polymer Version is exactly that!

The PTS EPM-G Magazine is designed for use in airsoft AR36 replica's & is compatible with Tokyo Marui, Jing Gong, Classic Army, SRC, Umarex, Echo1 & other AR36 platforms alike. 

A Streamlined low profile 20mm RIS Vertical Foregrip with Internal Storage space. Designed by PTS to be the ultimate Dynamic tactical grip, the EPF2- (Enhanced Polymer Foregrip 2) is a revision of PTSs original and highly successful EPF grip, both of which are High-Speed / Low-Drag design, designed to avoid snagging on other equipment or clothing.

Buy a triple pack and save some money in the meantime! The latest PTS Enhanced Polymer Magazine that allows you to switch from a 30rnd to 120rnd capacity within a split second from the underside of the magazine! The most robust magazine on the market, a must for anyone seeking realism and reliability.

The all-new Dead Air suppressor range from PTS is here! An excellent suppressor with a true baffle system to give actual sound dampening to your platform. The new Dead Air is perfect for the Airsofter who's after adding that little bit of "designer touch" to their setup.

A Pistol Grip designed by PTS Syndicate for Airsoft M4/15/16 Replicas which follows the same design traits as Magpul Real Steel Accessories and attachments: Ergonomic, Lightweight, Durable and absolutely always tactical.

If you want to add some ambidextrous functionality to your M4/AR15 AEG or KWA ERG platform along with a hint of flare, this charging handle from PTS Syndicate would be perfect! The Radian Raptor-LT is based on the real steel Radian Raptor ambidextrous charging handle and includes licenced Radian trademarks laser engraved onto the handle itself.

To add a custom aesthetic, PTS has produced this charging handle with red or black levers on either side, giving your receiver a nice pop and letting observers know your gun has the custom touch!

A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.