WELL Airsoft

If you are equipped with the WELL PRO WE06 PPK-20 Compact, whether it is the Standard or Advanced version, you will need a few of these to keep it well-fed! The WELL PRO 30/80rnd Variable Capacity Magazine For WE06 is constructed with a high-density polymer shell and steel baseplate and is compatible with both variants of the WE06, but is not compatible with ARCTURUS PP-19 or PPK-20 variants. 

This is an adjustable-capacity magazine which allows you to choose between 30rnd and 80rnd capacity by removing the internals from the shell and flicking the switch on the right side. This can be achieved by pushing the detent on the bottom of the mag in and sliding the baseplate off, after which the internals can be removed through the bottom. 

Otherwise, this mag works just like a normal midcap; filled with a speed loader through the fill/feed port at the top, with no battle rattle giving you away thanks to its spring-loaded internals. Whether it is the impressive Standard version or the insane Advanced version, you'll need quite a few of these to do this fantastic platform justice!

If you need to load up on magazines for your SMG-7 AEP, but you don't want the "battle rattle" from using high capacity magazines, you'll need a few of these! The 100rnd Mid-cap magazine for the well R4 is constructed with a steel upper shell and feed spring, and a polymer lower shell with polymer internals. The magazine includes "4.6x30" stamped markings on the left side of the shell and realistic reinforcement ribs along the sides of the upper shell. This magazine holds 100 6mm BBs and can be fed through the feed/fill port at the top of the magazine using a standard Airsoft speed loader. The magazine is designed for the Well R4 but should work in most SMG-7 AEPs. 

A 145rnd clockwork wound high capacity magazine for the Well R-4 series of SMG-7 styled Airsoft AEP.

If you dream of an Airsoft juggernaut loadout, this is the primary you need! The WE23-L Rotary Minigun AEG; Arm-mounted is another unique design from Well, part of its "PRO" line of high-end AEGs and based on the positively epic WE23-S. The -L model replaces the standard pistol grip and handguard with a wrist brace and forward-mounted grip; allowing you to wild this monster with a single hand and opening up the opportunity to dual-wield and bring unrivalled firepower to your next skirmish.

On the inside, the WE23-L is rocking the same awesome internals as the -S model. The 5 inner barrels are all 6.03mm tightbores, granting a small increase in FPS and improved accuracy potential. The 5 HOP-up units are all independently adjustable, making use of a rotary design to apply adjustments. The bearings are 8mm, meaning smooth running and low friction, and the Minigun is also compatible with standard AEG HOP-up buckings and inner barrels, just in case its performance isn't already enough for you!

Hitting out at a phenomenal 36 rounds per second on an 11.1V battery with an autowinding 1200rnd high-cap on tap, the WE23-L Arm-mounted minigun is without equal when it comes to in-game firepower and is built like a tank as a bonus, making use of some of the best machining and strongest polymers we've seen on an Airsoft gun. Whether you're working on a CWIS loadout, a juggernaut kit or just want to make lots of enemies at your next game, the WELL PRO WE23-L Rotary Minigun AEG; Arm-Mounted is your ideal primary!

If you need an SMG but want to stand out from the crowd, the WE06 Standard Version from WELL PRO is one way to do it! This SMG replicates the latest in the line of Russian AK-derived submachine guns, known as the PPK-20 Compact and based on the well-known PP-19-01 Vityaz.

While the Advanced Version leads the pack, the Standard Version of WELL PRO's PPK-20 Compact has more than its fair share of internal goodness. A 6.02mm tightbore inner barrel provides additional accuracy to compensate for the short overall length, the 18:1 ratio steel gears run on 8mm slide bearings for a smoother gearbox sound and the system is powered by a mighty 20K RPM high-speed motor kept in check by a protective in-line MOSFET.

Boasting a mix of M-LOK negative space attachment slots, 20mm Picatinny rails, ambidextrous fire controls and an advanced side folding retractable stock, you would be forgiven for thinking this platform had Western origins as it is very rare indeed for a Russian platform to give some thought to ergonomics. Consider this the Ruskie UTR45; at the cutting edge of external design with internals and performance that will surprise you (and the enemy team)!

If you are running the Well Minigun you will probably want a couple of these on hand to keep up with its intense rate of fire! The Well 1200rnd Magazine for WE23-S Mingun holds 1200 BBs and winds itself via the internal motor of the Well Minigun, meaning no need to do anything but pull the trigger!

The magazine indexes at the rear and rocks in to lock at the front, similarly to an AK or FAL platform but backwards, and the magazine release is located on the front of the mag, taking the form of a button. To fill the mag, you will need to remove the rear plate to expose the fill window by squeezing the two tabs on either side of the central "bar" on the rear plate and removing it, together with its internal spring. Remove the entire assembly, pour your BBs into the mag,  reinstall the rear plate and you are ready to shoot!

If you are looking for a serious speed demon of an AEG, the WELL PRO WE06 PPK-20 Compact SMG AEG - Advanced Version is without equal in its price range. Based on the most recent prototype of the PPK-20 SMG, an AK-derived SMG design, the WE06 boasts both M-LOK and 20mm Picatinny accessory attachment interfaces, ambidextrous fire controls and a side folding retractable stock based on that of the AM-17, another advanced Kalashnikov Concern prototype.

On the inside, the WE06 Advanced Version is absolutely insane. Featuring 9:1 ratio high-speed steel gears with a dual sector gear, a programmable optical MOSFET and a 20K RPM high-speed Neodymium magnet motor, this beast kicks out an insane 25 rounds per second with an 11.1V battery! Not content with building an affordable SMG with minigun-like speed, WELL PRO saw fit to install a 6.02mm tightbore inner barrel to improve accuracy and FPS, meaning this lightweight, compact platform can still upset the enemy at range. If you like cutting edge modern SMGs with a unique look and a positively incredible rate of fire, this is what you need!

Do you want a good-looking and lightweight rifle for the CQB arena? Then the WELL PRO WE09K AK-12 AEG Rifle w/AK-205 Stock should definitely interest you! This affordable AK-12 rifle has the added benefit of some borrowed furnishings from the funky AK-205, it is styled after the latest AK-12 variants offered to civilian shooters and offers improved ergonomics thanks to the new AK-205 stock and enhanced pistol grip.

This full high-density polymer AEG is lightweight and perfect for players who don't want tired arms after a day of carrying their rifle around. The polymer, however, does not mean that this AEG isn't durable. It will survive the tribulations of any skirmish with minimum cosmetic damage. The optical MOSFET is a nice addition to this AK-12 and allows the fire selector to be programmed for alternative fire modes such as burst modes or binary trigger. This paired with the 6.03mm tightbore inner barrel provides for excellent accuracy potential straight out of the box

Whether you are fixed on an AK-12 or you are contemplating the available AK platform options, the WELL PRO WE09K AK-12 AEG Rifle w/AK-205 Stock would make a fantastic, affordable and up-to-date primary for any modern Russian military or PMC loadout! An ideal CQB rifle, lightweight and shorter than other AK variants, with this AEG you are sure to torment those who come to face you and ensure your victory!

If you've been waiting for the perfect Minigun for a fast-moving playstyle, the WELL PRO WE23-MINI Compact Rotary Minigun AEG is exactly that! Based on the innovative WE23-S Rotary Minigun, this more agile alternative is equipped with a sliding minimalist stock and conventional pistol grip setup, giving it handling more similar to an assault rifle but with firepower that is hard to beat! 

On the inside, the WE23-MINI is rocking the same awesome internals as the -S model. The 5 inner barrels are all 6.03mm tightbores, granting a small increase in FPS and improved accuracy potential. The 5 HOP-up units are all independently adjustable, making use of a rotary design to apply adjustments. The bearings are 8mm, meaning smooth running and low friction, and the Minigun is also compatible with standard AEG HOP-up buckings and inner barrels, just in case its performance isn't already enough for you!

If you're looking for a head turner of an Airsoft support weapon which really brings the pain in-game, the WE23-MINI is one to watch. With the same incredible 36 RPS fire rate as its bigger brothers in a more compact and practical form, the WELL PRO WE23-MINI Compact Rotary Minigun AEG is ready to change your game!

If you play to win, you will need this to keep up! The Well WE23-S Rotary Minigun AEG is a unique design from Well, part of its "PRO" line of high end AEGs. This Airsoft Minigun is constructed primarily from high density polymer to keep the weight manageable, with 5 aluminium outer barrels braced with an aluminium ring at the tip. The Minigun feeds from 1200rnd spring-assisted high-capacity magazines which are wound by the internal motor of the Minigun itself, meaning you can spray and pray without worrying about winding every 3 seconds!

On the inside, Well has equipped this Minigun with the parts it needs to truly dominate the battlefield. The 5 inner barrels are all 6.03mm tightbores, granting a small increase in FPS and improved accuracy potential. The 5 HOP-up units are all independently adjustable, making use of a TDC design with grub screws to apply adjustments. The bearings are 8mm, meaning smooth running and low friction, and the Minigun is also compatible with standard AEG HOP-up buckings and inner barrels, just in case its performance isn't already enough for you!

The Well Minigun has the very real potential to change the game, with an incredible 36 rounds per second on an 11.1V LiPo battery and a monstrous 1200rnd magazine that winds itself. Miniguns have been around before, but this one is smaller, lighter and far more affordable than its rivals. If you have wanted a taste of the Minigun life but held off for one reason or another, with the Well Minigun in your hands you will be happy you waited!

If you've held off on getting a PPK-20, waiting patiently for the GBB version, get excited now! The WELL PRO WE06-GM PPK-20 Compact GBB SMG is based on the Tokyo Marui AKM GBBR internally, giving it astonishing consistency and superb gas efficiency, not to mention violent recoil!

Being a GBB SMG, this beast works just like the real thing, requiring the charging handle to be pulled before the first shot and providing shoulder-thumping recoil each time you squeeze the trigger, or over and over again if you flick the switch to full auto! Naturally, if you're new to GBBRs we recommend giving our guide a read but if realism is your thing, you won't look back!

While it looks the same as the AEG version, the WE06-GM is a whole new beast, boasting full metal construction with an authentic stamped steel receiver and top cover, a milled steel flash hider and superb quality aluminium parts. If you love the looks of Russia's latest SMG but need maximum realism, the WELL PRO WE06-GM PPK-20 Compact GBB SMG is waiting for you!

If you've set your sights on a sniper rifle but don't want to break the bank, the WELL PRO MB03AE Bolt Action Sniper Rifle; Upgraded Version is a fantastic option! Based on the original MB03, a close copy of the TM VSR-10, the AE version is upgraded on the inside with a 6.03mm tightbore inner barrel, a steel spring guide, 90-degree piston/trigger sear set and reinforced steel parts throughout the trigger group.

This makes the MB03AE robust enough internally to handle higher power springs, though the pre-installed APS-2 spec mainspring puts out an impressive 412 FPS approximately with 0.2g BBs. Externally, the MB03AE is simple and functional, equipped with a 20mm Picatinny receiver rail for your scope, front and rear sling points and a 20mm Picatinny bipod rail on the bottom, ready to be kitted out sniper rifle style. A spiral-fluted aluminium outer barrel adds a bit of visual interest and style to make it stand out next to the original MB03 and the reprofiled bolt handle ensures you don't scrape your knuckles on your optic when working the bolt.

As far as entry-level sniper rifles go, the MB03AE is a cut above the rest and boasts a fantastic quality polymer stock with a textured finish, indicating fibre reinforcement. If you want to sample Airsoft sniping without getting in too deep financially, the WELL PRO MB03AE Bolt Action Sniper Rifle; Upgraded Version is the perfect thing!

If you're rocking the WELL PRO WE06-GM PPK-20 GBB SMG, these are what you need to keep the recoil thumping! The WELL PRO 38rnd Green Gas Magazine for WE06-GM PPK-20 GBB is constructed with an alloy shell and polymer feed lips, replicating the shape of the real steel PPK-20/PP-19-01 magazine flawlessly.

The mag can be loaded through the feed lips at the top using a speed loader or by hand, though this is much easier if you pull the follower on the front down to relieve spring pressure. The gas fill valve is concealed beneath the stamped steel baseplate; simply lift the bottom section of the follower up and slide the baseplate off to the rear to access the valve. This magazine also features a "Bolt stop" mechanism, giving you the "dead man's click" when your mag runs dry, just like the real PPK-20!

A replacement or spare magazine designed for the Well R-4 SMG-7 Airsoft Electric Pistol, and is based on the real MP7's short compact magazine. 

If you are running the Well WE23-Mini you will probably want a couple of these on hand to keep up with its intense rate of fire! The WELL PRO 600rnd Magazine for WE23-MINI Minigun holds 600 BBs and winds itself via the internal motor of the Minigun itself, meaning no need to do anything but pull the trigger!

The magazine indexes at the rear and rocks in to lock at the front, similarly to an AK or FAL platform but backwards. The magazine release is located on the front of the mag, taking the form of a button. To fill the mag, you will need to remove the rear plate to expose the fill window by squeezing the two tabs on either side of the central "bar" on the rear plate and removing it, together with its internal spring. Remove the entire assembly, pour your BBs into the mag,  reinstall the rear plate and you are ready to shoot!

If you held off on the original WE06 PPK-20 because of its lack of steel, the WELL PRO WE06 PPK-20 Compact SMG AEG w/ Eshooter MOSFET; Full Metal is the one to go for! Based on the most recent prototype of the PPK-20 SMG, an AK-derived SMG design, the WE06 boasts both M-LOK and 20mm Picatinny accessory attachment interfaces, ambidextrous fire controls and a side folding retractable stock based on that of the AM-17, another advanced Kalashnikov Concern prototype. 

This, being the "full metal" version is also rocking a steel flash hider and a steel trunnion block along with a stamped steel receiver and top cover, giving it the appropriate hefty feel for the authentic replica experience. Inside, we have a unique version 3 gearbox-derived shell with a quick change spring system, a steel 18:1 ratio gearset running on 8mm slide bearings, a type 2 cylinder, a polymer piston with a full rack of steel teeth and an EShooter programmable MOSFET to top it off. The EShooter 'FET provides electrical efficiency improvements, battery protection and cycle completion along with programmable fire modes and adjustable pre-cocking. If you love the styling of the WE06 PPK-20 Compact SMG but have been waiting for the full metal version, here you go!

While it may not be the most practical primary available, nothing lays down firepower quite like the WE23-H Rotary Minigun AEG from WELL PRO. This is the Tripod Mounted version, pre-fitted with a 7mm metric threaded tripod mount on the bottom, ready to dominate any fixed position. The tripod mount also opens up possibilities of building an Airsoft technical (a light vehicle with a mounted weapon). Ambitious techy Airsofters who've been dreaming of riding around on the back of a golf buggy or quad bike showering the enemy team in a torrent of white fury, you need this!

If you haven't already heard, the WELL PRO Minigun series is simply without equal when it comes to rate of fire, hitting out at 36 rounds per second on an 11.1V LiPo battery. With significantly increased capacity, longer barrels and the ability to be mounted to common tripods you may already have in a dusty corner at home, the WELL PRO WE23-H Rotary Minigun AEG; Tripod Mounted adds a new dimension to Airsoft gameplay and makes a fantastic collection centrepiece! 

A compact and lightweight submachine gun, perfect for CQB sites or as an introductory weapon, with an instantly recognisable design, as well as rails on the top and sides for additional customisation options.

A CO2 powered authentic replica of the legendary British revolver. If you're in the market for an accurate replica of the MK VI, then look no further than this, affordable and accurate representation of the revolver which saw use from 1915 and well beyond the Second World War.

Please note this product is a 6mm BB Airsoft variant & not a 4.5mm / .177 Air gun. 

A spring powered 6mm Airsoft BB bolt action sniper rifle featuring realistic alloy and polymer materials and an adjustable cheek rest, based on the Accuracy International Arctic Warfare sniper rifle, known to many as the British Army's L96A1.

A spring powered 6mm Airsoft BB bolt action sniper rifle featuring realistic alloy and polymer materials and an adjustable cheek rest, based on the Accuracy International Arctic Warfare sniper rifle, known to many as the British Army's L96A1.

A spring powered 6mm Airsoft BB bolt action sniper rifle featuring realistic alloy and polymer materials and an adjustable cheek rest, based on the Accuracy International Arctic Warfare sniper rifle, known to many as the British Army's L96A1.

If you need modern AK magazines for your AK-12, fill your rig with the WELL PRO 180rnd AK-12-style Mid-cap Magazine For AK AEGs! This magazine is a near-perfect match for the real AK-12 magazine and holds a respectable 180 BBs. Loading is carried out through the fill/feed port on the top of the magazine body using an Airsoft speed loader or loading tool. 

Each side of the AK-12-style Magazine includes waffle texture for improved traction and strength, with mock witness windows on each side. Compatibility-wise, this magazine should fit and feed in the vast majority of AK-47/74 style AEGs on the market, including the WELL PRO and ARCTURUS AK-12 ranges. If you need a suitable mag for your modern AK loadout, the WELL PRO 180rnd AK-12-style Mid-cap Magazine For AK AEGs will serve you well!

An Airsoft bipod with rubber feet for stabilizing Airsoft platforms while shooting from fixed positions. This bipod is compatible with any rifle which has a Picatinny 20mm rail for mounting but also comes with an L96 spigot mount for using this rifle on L96-type rifles with the spigot socket at the front of the stock.

A spare/replacement magazine for your WELL MB02/ MB03/MB07/MB09/MB10/MB11/MB12 sniper rifle. The magazine holds 28 rounds and can be filled via the feed lips on the top of the magazine either manually or with a speedloader.

An Alloy constructed Trigger Set for the WELL MB Series of Spring-Powered Sniper Rifles, which is designed as a drop-in unit to replace a damaged Trigger. The part is very easy to install and is a great way to bring your MB-01/MB-08 back to life with minimal fuss, should it be suffering from a Trigger fault.

If AK platforms are right up your alley and you're in the market for an affordable AK-12 rifle with the added benefit of some borrowed design features from the funky AK-205, then the WELL PRO WE09 AK-12 AEG Rifle w/AK-205 Stock should definitely interest you! This updated version of the platform is styled after the latest AK-12 variants offered to civilian shooters, with improved ergonomics thanks to the new AK-205 stock and enhanced pistol grip.

This full high-density polymer AEG is lightweight and perfect for players who don't want tired arms after a day of carrying their rifle around. The polymer, however, does not mean that this AEG isn't durable. It will survive the tribulations of any skirmish with minimum cosmetic damage. The optical MOSFET is a nice addition to this AK-12 and allows the fire selector to be programmed for alternative modes of fire such as burst modes or binary trigger. This paired with the 6.03mm tightbore inner barrel allows for excellent accuracy potential straight out of the box.

Whether you are fixed on an AK-12 or you are contemplating the available AK platform options, the WELL PRO WE09 AK-12 AEG Rifle w/AK-205 Stock would make a fantastic, affordable and up-to-date primary for any modern Russian military or PMC loadout!

If you're all about performance and demand an intense rate of fire the WELL PRO WE07 M4/AR-15 DSG AEG; Kestrel Basic ETU is sure to impress you! This predominantly high density polymer M4/AR-15 platform is all about speed, tipping the scales at a minuscule 2kg and rocking what is known as a Dual Sector Gear. The DSG effectively doubles the rate of fire to a phenomenal 30 rounds per second by cycling the piston twice per rotation of the gears, providing a Vulcan Cannon-like rate of fire in a lightweight and highly agile package!

Inside, the pre-installed Kestrel Basic ETU brings some advanced functionality to this speedy setup; offering programmable fire modes including 3 round burst and binary trigger, adjustable pre-cocking with 6 levels to choose from and several quality-of-life functions such as low battery warning and cycle completion. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you superb accuracy potential and the latest HOP-up design for M4/AR-15 platforms.

The good stuff isn't exclusive to internals either; the WE07 boasts an M-LOK handguard, 14mm CCW male threaded barrel and 20mm Picatinny railed receiver, ready to be dressed up with accessories to suit your personal needs. If you move fast and need a speedy platform to match, the WELL PRO WE07 M4/AR-15 DSG AEG; Kestrel Basic ETU is about as fast as they come!

A tough and simple bipod for 20mm rail systems, which offers a stable platform to rest your rifle either for display, or to take a prone position and catch the enemy by surprise.

A hefty bolt action spring powered sniper rifle with a sleek, modern sporting aesthetic, a fluted barrel, folding stock for transport and a gorgeous KeyMod/20mm rail system that sets this apart from other long rifles.